//
// Copyright 2011-2012 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//



// Common IO Pins
#define LO_LPF_EN       (1 << 15)
#define SYNTH_CE        (1 << 3)
#define SYNTH_PDBRF     (1 << 2)
#define SYNTH_MUXOUT    (1 << 1)                // INPUT!!!
#define LOCKDET_MASK    (1 << 0)                // INPUT!!!

// TX IO Pins
#define TRSW            (1 << 14)               // 0 = TX, 1 = RX
#define TX_LED_TXRX     (1 << 7)                // LED for TX Antenna Selection TX/RX
#define TX_LED_LD       (1 << 6)                // LED for TX Lock Detect
#define DIS_POWER_TX    (1 << 5)                // on UNIT_TX, 0 powers up TX
#define TX_ENABLE       (1 << 4)                // on UNIT_TX, 0 disables TX Mixer

// RX IO Pins
#define LNASW           (1 << 14)               // 0 = TX/RX, 1 = RX2
#define RX_LED_RX1RX2   (1 << 7)                // LED for RX Antenna Selection RX1/RX2
#define RX_LED_LD       (1 << 6)                // LED for RX Lock Detect
#define DIS_POWER_RX    (1 << 5)                // on UNIT_RX, 0 powers up RX
#define RX_DISABLE      (1 << 4)                // on UNIT_RX, 1 disables RX Mixer and Baseband

// RX Attenuator Pins
#define RX_ATTN_SHIFT   8                       // lsb of RX Attenuator Control
#define RX_ATTN_MASK    (63 << RX_ATTN_SHIFT)   // valid bits of RX Attenuator Control

// TX Attenuator Pins
#define TX_ATTN_SHIFT   8                       // lsb of TX Attenuator Control
#define TX_ATTN_MASK    (63 << TX_ATTN_SHIFT)   // valid bits of TX Attenuator Control

// Mixer functions
#define TX_MIXER_ENB    (SYNTH_PDBRF|TX_ENABLE)
#define TX_MIXER_DIS    0

#define RX_MIXER_ENB    (SYNTH_PDBRF)
#define RX_MIXER_DIS    0

// Pin functions
#define TX_LED_IO       (TX_LED_TXRX|TX_LED_LD)     // LED gpio lines, pull down for LED
#define TXIO_MASK       (LO_LPF_EN|TRSW|SYNTH_CE|SYNTH_PDBRF|TX_ATTN_MASK|DIS_POWER_TX|TX_ENABLE)

#define RX_LED_IO       (RX_LED_RX1RX2|RX_LED_LD)   // LED gpio lines, pull down for LED
#define RXIO_MASK       (LO_LPF_EN|LNASW|SYNTH_CE|SYNTH_PDBRF|RX_ATTN_MASK|DIS_POWER_RX|RX_DISABLE)

// Power functions
#define TX_POWER_UP     (SYNTH_CE)
#define TX_POWER_DOWN   (DIS_POWER_TX)

#define RX_POWER_UP     (SYNTH_CE)
#define RX_POWER_DOWN   (DIS_POWER_RX)

// Antenna constants
#define ANT_TX          TRSW                    //the tx line is transmitting
#define ANT_RX          0                       //the tx line is receiving
#define ANT_TXRX        0                       //the rx line is on txrx
#define ANT_RX2         LNASW                   //the rx line in on rx2
#define ANT_XX          LNASW                   //dont care how the antenna is set


#include <uhd/types/dict.hpp>
#include <uhd/types/ranges.hpp>
#include <uhd/types/sensors.hpp>
#include <uhd/utils/assert_has.hpp>
#include <uhd/utils/log.hpp>
#include <uhd/utils/static.hpp>
#include <uhd/utils/algorithm.hpp>
#include <uhd/utils/msg.hpp>
#include <uhd/usrp/dboard_base.hpp>
#include <uhd/usrp/dboard_manager.hpp>
#include <boost/assign/list_of.hpp>
#include <boost/format.hpp>
#include <boost/math/special_functions/round.hpp>
#include <boost/thread.hpp>


using namespace uhd;
using namespace uhd::usrp;
using namespace boost::assign;


/***********************************************************************
 * The SBX dboard constants
 **********************************************************************/
static const freq_range_t sbx_freq_range(400e6, 4.4e9);

static const freq_range_t sbx_tx_lo_2dbm = list_of
    (range_t(0.35e9, 0.37e9))
;

static const freq_range_t sbx_enable_tx_lo_filter = list_of
    (range_t(0.4e9, 1.5e9))
;

static const freq_range_t sbx_enable_rx_lo_filter = list_of
    (range_t(0.4e9, 1.5e9))
;

static const std::vector<std::string> sbx_tx_antennas = list_of("TX/RX")("CAL");

static const std::vector<std::string> sbx_rx_antennas = list_of("TX/RX")("RX2")("CAL");

static const uhd::dict<std::string, gain_range_t> sbx_tx_gain_ranges = map_list_of
    ("PGA0", gain_range_t(0, 31.5, double(0.5)))
;

static const uhd::dict<std::string, gain_range_t> sbx_rx_gain_ranges = map_list_of
    ("PGA0", gain_range_t(0, 31.5, double(0.5)))
;

/***********************************************************************
 * The SBX dboard
 **********************************************************************/
class sbx_xcvr : public xcvr_dboard_base{
public:
    sbx_xcvr(ctor_args_t args);
    ~sbx_xcvr(void);

protected:

    uhd::dict<std::string, double> _tx_gains, _rx_gains;
    double       _rx_lo_freq, _tx_lo_freq;
    std::string  _tx_ant, _rx_ant;
    bool _rx_lo_lock_cache, _tx_lo_lock_cache;

    void set_rx_ant(const std::string &ant);
    void set_tx_ant(const std::string &ant);
    double set_rx_gain(double gain, const std::string &name);
    double set_tx_gain(double gain, const std::string &name);

    void update_atr(void);

    /*!
     * Set the LO frequency for the particular dboard unit.
     * \param unit which unit rx or tx
     * \param target_freq the desired frequency in Hz
     * \return the actual frequency in Hz
     */
    virtual double set_lo_freq(dboard_iface::unit_t unit, double target_freq);

    /*!
     * Get the lock detect status of the LO.
     * \param unit which unit rx or tx
     * \return true for locked
     */
    sensor_value_t get_locked(dboard_iface::unit_t unit);

    /*!
     * Flash the LEDs
     */
    void flash_leds(void);

    /*!
     * Version-agnostic ABC that wraps version-specific implementations of the
     * WBX base daughterboard.
     *
     * This class is an abstract base class, and thus is impossible to
     * instantiate.
     */
    class sbx_versionx {
    public:
        sbx_versionx() {}
        ~sbx_versionx(void) {}

        virtual double set_lo_freq(dboard_iface::unit_t unit, double target_freq) = 0;
    };

    /*!
     * Version 3 of the SBX Daughterboard
     */
    class sbx_version3 : public sbx_versionx {
    public:
        sbx_version3(sbx_xcvr *_self_sbx_xcvr);
        ~sbx_version3(void);

        double set_lo_freq(dboard_iface::unit_t unit, double target_freq);

        /*! This is the registered instance of the wrapper class, sbx_base. */
        sbx_xcvr *self_base;
    };

    /*!
     * Version 4 of the SBX Daughterboard
     *
     * The only difference in the fourth revision is the ADF4351 vs the ADF4350.
     */
    class sbx_version4 : public sbx_versionx {
    public:
        sbx_version4(sbx_xcvr *_self_sbx_xcvr);
        ~sbx_version4(void);

        double set_lo_freq(dboard_iface::unit_t unit, double target_freq);

        /*! This is the registered instance of the wrapper class, sbx_base. */
        sbx_xcvr *self_base;
    };

    /*!
     * Handle to the version-specific implementation of the SBX.
     *
     * Since many of this class's functions are dependent on the version of the
     * SBX board, this class will instantiate an object of the appropriate
     * sbx_version* subclass, and invoke any relevant functions through that
     * object.  This pointer is set to the proper object at construction time.
     */
    typedef boost::shared_ptr<sbx_versionx> sbx_versionx_sptr;
    sbx_versionx_sptr db_actual;
};