#!/usr/bin/env python
#
# Copyright 2013 Ettus Research LLC
#
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.
#

########################################################################
# Template for raw text data describing registers
# name addr[bit range inclusive] default optional enums
########################################################################

REGS_TMPL="""\
########################################################################
## Address 0x00
## Divider control
## Write-only, default = 0x007D0000
########################################################################
int_n_mode              0x00[31]        0       frac_n, int_n
int_16_bit              0x00[15:30]     0x007D  ##Integer divider: 16-65535 in int-N mode, 19-4091 in frac-N mode.
frac_12_bit             0x00[3:14]      0       ##Frac divider: 0-4095
########################################################################
## Address 0x01
## Charge pump control
## Write-only, default = 0x2000FFF9
########################################################################
cpoc                    0x01[31]        0       disabled, enabled
cpl                     0x01[29:30]     1       disabled, enabled, res1, res2
cpt                     0x01[27:28]     0       normal, reserved, force_source, force_sink
phase_12_bit            0x01[15:26]     1       ##sets phase shift
mod_12_bit              0x01[3:14]      0xFFF   ##VCO frac modulus
########################################################################
## Address 0x02
## Misc. control
## Write-only, default = 0x00004042
########################################################################
lds                     0x02[31]        0       slow, fast
low_noise_and_spur      0x02[29:30]     3       low_noise, reserved, low_spur_1, low_spur_2
muxout                  0x02[26:28]     1       tri_state, high, low, rdiv, ndiv, ald, dld, res7
reference_doubler       0x02[25]        0       disabled, enabled
reference_divide_by_2   0x02[24]        0       disabled, enabled
r_counter_10_bit        0x02[14:23]     1       ##R divider value, 1-1023
double_buffer           0x02[13]        0       disabled, enabled
#set $current_setting_enums = ', '.join(map(lambda x: '_'.join(("%0.2fma"%(1.631/5.1 * (1.+x))).split('.')), range(0,16)))
charge_pump_current     0x02[9:12]      7       $current_setting_enums
ldf                     0x02[8]         0       frac_n, int_n
ldp                     0x02[7]         0       10ns, 6ns
pd_polarity             0x02[6]         1       negative, positive
power_down              0x02[5]         0       normal, shutdown
cp_three_state          0x02[4]         0       disabled, enabled
counter_reset           0x02[3]         0       normal, reset
########################################################################
## Address 0x03
## VCO control
## Write-only, default = 0x0000000B
########################################################################
vco                     0x03[26:31]     0       ##VCO subband selection, used when VAS disabledd
vas                     0x03[25]        0       enabled, disabled ##VCO autoselect
retune                  0x03[24]        1       disabled, enabled
clock_div_mode          0x03[15:16]     0       clock_divider_off, fast_lock, phase, reserved
clock_divider_12_bit    0x03[3:14]      1       ##clock divider, 1-4095
########################################################################
## Address 0x04
## RF output control
## Write-only, default = 0x6180B23C
########################################################################
res4                    0x04[26:31]     0x18
bs_msb                  0x04[24:25]     0       ##Band select MSBs
feedback_select         0x04[23]        1       divided, fundamental
rf_divider_select       0x04[20:22]     0       div1, div2, div4, div8, div16, div32, div64, div128
band_select_clock_div   0x04[12:19]     0
aux_output_select       0x04[9]         1       divided, fundamental
aux_output_enable       0x04[8]         0       disabled, enabled
aux_output_power        0x04[6:7]       0       m4dBm, m1dBm, 2dBm, 5dBm
rf_output_enable        0x04[5]         1       disabled, enabled
output_power            0x04[3:4]       3       m4dBm, m1dBm, 2dBm, 5dBm
########################################################################
## Address 0x05
## Misc
## Write only, default = 0x00400005
########################################################################
f01                     0x05[24]        1       frac_n, auto
ld_pin_mode             0x05[22:23]     1       low, dld, ald, high
mux_sdo                 0x05[18]        0       normal, sdo
"""

########################################################################
# Template for methods in the body of the struct
########################################################################
BODY_TMPL="""\
enum addr_t{
    ADDR_R0 = 0,
    ADDR_R1 = 1,
    ADDR_R2 = 2,
    ADDR_R3 = 3,
    ADDR_R4 = 4,
    ADDR_R5 = 5
};

boost::uint32_t get_reg(boost::uint8_t addr){
    boost::uint32_t reg = addr & 0x7;
    switch(addr){
    #for $addr in range(5+1)
    case $addr:
        #for $reg in filter(lambda r: r.get_addr() == addr, $regs)
        reg |= (boost::uint32_t($reg.get_name()) & $reg.get_mask()) << $reg.get_shift();
        #end for
        break;
    #end for
    }
    return reg;
}
"""

if __name__ == '__main__':
    import common; common.generate(
        name='max2870_regs',
        regs_tmpl=REGS_TMPL,
        body_tmpl=BODY_TMPL,
        file=__file__,
    )