========================================================================
UHD - Firmware and FPGA Image Application Notes
========================================================================

.. contents:: Table of Contents

------------------------------------------------------------------------
Images Overview
------------------------------------------------------------------------
Every USRP device must be loaded with special firmware and FPGA images.
The methods of loading images into the device varies among devices:

* **USRP1:** The host code will automatically load the firmware and FPGA at runtime.
* **USRP2:** The user must manually write the images onto the USRP2 SD card.
* **USRP-N Series:** The user must manually transfer the images over ethernet.
* **USRP-E Series:** The host code will automatically load the FPGA at runtime.
* **USRP-B Series:** The host code will automatically load the FPGA at runtime.

------------------------------------------------------------------------
Pre-built images
------------------------------------------------------------------------

Pre-built images are available for download.
See the UHD wiki for the download link.

The pre-built images come in two forms:

* bundled with UHD in a platform-specific installer
* stand-alone platform-independent archive files

^^^^^^^^^^^^^^^^^^^^^^
Platform installers
^^^^^^^^^^^^^^^^^^^^^^
The UNIX-based installers will install the images into /usr/share/uhd/images.
On windows, the images will be installed to <install-path>/share/uhd/images.

^^^^^^^^^^^^^^^^^^^^^^
Archive install
^^^^^^^^^^^^^^^^^^^^^^
When installing images from an archive, there are two options:

**Option 1:**

Unpack the archive into the UHD installation prefix.
The UHD will always search <install-path>/share/uhd/images for image files.
Where <install-path> was set by the CMAKE_INSTALL_PREFIX at configure-time.

**Option 2:**

Unpack the archive anywhere and set the UHD_IMAGE_PATH environment variable.
The UHD_IMAGE_PATH may contain a list of directories to search for image files.

------------------------------------------------------------------------
Building images
------------------------------------------------------------------------

The UHD source repository comes with the source code necessary to build
both firmware and FPGA images for all supported devices.
The build commands for a particular image can be found in <uhd-repo-path>/images/Makefile.

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Xilinx FPGA builds
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Xilinx ISE 12.x and up is required to build the Xilinx FPGA images.
The build requires that you have a unix-like environment with make.
Make sure that xtclsh from the Xilinx ISE bin directory is in your $PATH.

See <uhd-repo-path>/fpga/usrp2/top/*

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
ZPU firmware builds
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The ZPU GCC compiler is required to build the ZPU firmware images.
The build requires that you have a unix-like environment with cmake and make.
Make sure that zpu-elf-gcc is in your $PATH.

See <uhd-repo-path>/firmware/zpu

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Altera FPGA builds
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Quartus is required to build the Altera FPGA images.
Pre-built images can also be found in <uhd-repo-path>/fpga/usrp1/rbf

See <uhd-repo-path>/fpga/usrp1/toplevel/*

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
FX2 firmware builds
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
The sdcc compiler is required to build the FX2 firmware images.
The build requires that you have a unix-like environment with cmake and make.

See <uhd-repo-path>/firmware/fx2