======================================================================== UHD - Firmware and FPGA Image Application Notes ======================================================================== .. contents:: Table of Contents ------------------------------------------------------------------------ Images Overview ------------------------------------------------------------------------ Every USRP device must be loaded with special firmware and FPGA images. The methods of loading images into the device varies among devices: * **USRP1:** The host code will automatically load the firmware and FPGA at runtime. * **USRP2:** The user must manually write the images onto the USRP2 SD card. * **USRP-N Series:** The user must manually transfer the images over ethernet. * **USRP-E Series:** The host code will automatically load the FPGA at runtime. ------------------------------------------------------------------------ Pre-built images ------------------------------------------------------------------------ Pre-built images are available for download. See the UHD wiki for the download link. The pre-built images come in platform-specific installer packages and platform-independent archive files: * **Linux:** DEB or RPM installer * **Windows:** not available yet... * **Macintosh:** not available yet... * **Platform-independent:** ZIP or TAR.GZ archive ^^^^^^^^^^^^^^^^^^ Linux installers ^^^^^^^^^^^^^^^^^^ The Linux-based installers will install the images into /usr/share/uhd/images. On a Linux system, the UHD will always search this path for image files. Commands to install a linux rpm or deb package: :: sudo rpm -i .rpm -- OR -- sudo dpkg -i .deb ^^^^^^^^^^^^^^^^^^^^^^ Archive install ^^^^^^^^^^^^^^^^^^^^^^ When installing images from an archive, there are two options: **Option 1:** Unpack the archive into the UHD installation prefix. The UHD will always search /share/uhd/images for image files. Where was set by the CMAKE_INSTALL_PREFIX at configure-time. **Option 2:** Unpack the archive anywhere and set the UHD_IMAGE_PATH environment variable. The UHD_IMAGE_PATH may contain a list of directories to search for image files. ------------------------------------------------------------------------ Building images ------------------------------------------------------------------------ The UHD source repository comes with the source code necessary to build both firmware and FPGA images for all supported devices. The build commands for a particular image can be found in /images/Makefile. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Xilinx FPGA builds ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Xilinx ISE 12.x and up is required to build the Xilinx FPGA images. The build requires that you have a unix-like environment with make. Make sure that xtclsh from the Xilinx ISE bin directory is in your $PATH. See /fpga/usrp2/top/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Microblaze firmware builds ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The Microblaze GCC compiler from the Xilinx EDK is required to build the Microblaze firmware images. The build requires that you have a unix-like environment with autotools and make. Make sure that mb-gcc from the Xilinx EDK/microblaze directory is in your $PATH. See /firmware/microblaze ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Altera FPGA builds ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Quartus is required to build the Altera FPGA images. Pre-built images can also be found in /fpga/usrp1/rbf See /fpga/usrp1/toplevel/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ FX2 firmware builds ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The sdcc compiler is required to build the FX2 firmware images. The build requires that you have a unix-like environment with autotools and make. See /firmware/fx2