/*! \page page_identification Device Identification

\tableofcontents

\section id_identifying Identifying USRP Devices

Devices are addressed through key/value string pairs. These string pairs
can be used to narrow down the search for a specific device or group of
devices. Most UHD utility applications and examples have an `--args`
parameter that takes a device address, which is expressed as a delimited
string.

See device_addr.hpp for reference.

\subsection id_identifying_common Common device identifiers

Every device has several ways of identifying it on the host system:

Identifier | Key      | Notes                                                     | Example
-----------|----------|-----------------------------------------------------------|---------------------------------
Serial     | serial   | globally unique identifier                                | 12345678
Address    | addr     | unique identifier on a network                            | 192.168.10.2
Resource   | resource | unique identifier for USRP RIO devices (over PCI Express) | RIO0
Name       | name     | optional user-set identifier                              | my_usrp1 (User-defined value)
Type       | type     | hardware series identifier                                | usrp1, usrp2, b200, x300, ...

\subsection id_identifying_cmdline Device discovery via command line

Devices attached to your system can be discovered using the
`uhd_find_devices` program. This program scans your system for
supported devices and prints out an enumerated list of discovered
devices and their addresses. The list of discovered devices can be
narrowed down by specifying device address args.

    uhd_find_devices

Device address arguments can be supplied to narrow the scope of the
search.

    uhd_find_devices --args="type=usrp1"

    -- OR --

    uhd_find_devices --args="serial=12345678"

\subsection id_identifying_api Device discovery through the API

The device::find() API call searches for devices and returns a list
of discovered devices.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.cpp}
    uhd::device_addr_t hint; //an empty hint discovers all devices
    uhd::device_addrs_t dev_addrs = uhd::device::find(hint);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

The `hint` argument can be populated to narrow the scope of the search.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.cpp}
    uhd::device_addr_t hint;
    hint["type"] = "usrp1";
    uhd::device_addrs_t dev_addrs = uhd::device::find(hint);

    -- OR --

    uhd::device_addr_t hint;
    hint["serial"] = "12345678";
    uhd::device_addrs_t dev_addrs = uhd::device::find(hint);
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

\subsection id_identifying_props Device properties

Properties of devices attached to your system can be probed with the
`uhd_usrp_probe` program. This program constructs an instance of the
device and prints out its properties, such as detected daughterboards,
frequency range, gain ranges, etc...

<b>Usage:</b>

    uhd_usrp_probe --args <device-specific-address-args>

\section id_naming Naming a USRP Device

For convenience purposes, users may assign a custom name to their USRP
device. The USRP device can then be identified via name, rather than a
difficult to remember serial or address.

A name has the following properties:

-   is composed of ASCII characters
-   is 0-20 characters
-   is not required to be unique

\subsection id_naming_set Set a custom name

Run the following commands:

    cd <install-path>/lib/uhd/utils
    ./usrp_burn_mb_eeprom --args=<optional device args> --values="name=lab1_xcvr"

\subsection id_naming_discovery Discovery via name

The keyword `name` can be used to narrow the scope of the search.
Example with the find devices utility:

    uhd_find_devices --args="name=lab1_xcvr"

    -- OR --

    uhd_find_devices --args="type=usrp1, name=lab1_xcvr"

*/
// vim:ft=doxygen: