/*! \page page_configfiles Configuration Files

\tableofcontents

For permanent configuration of certain device behaviours, UHD supports
configuration files.

\section configfiles_format Format of the configuration files

Configurations files use the INI format. A UHD configuration file might look
like this:

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~{.ini}
; Comments start with a semicolon
; Sections are put in square brackets:
[type=b200]
; These settings apply to all USRPs that are of type b200:
master_clock_rate=20e6

[serial=FE18011]
; These settings apply to the USRPs with the given serial:
master_clock_rate=10e6 ; If this is a b200, this will overwrite the above settings
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

\section configfiles_usrps Configuring USRPs

For the most part, any setting that can get put into device args at
initialization time can be put into the config file. For example, the X300 has
a key called `ext_adc_self_test` which is disabled by default. To enable it,
you can add it to your device args:

~~~{.cpp}
auto usrp = uhd::usrp::multi_usrp::make("type=x300,ext_adc_self_test=1");
~~~

However, this can be cumbersome if the intention is to permanently enable this
for all X300s connected to this machine. To generally enable this option for
all X300s without having to modify the `make()` call, the config file can
simply be updated as such:

~~~~{.ini}
[type=x300]
ext_adc_self_test=1
~~~~

This will act as if this key/value pair had been passed to the device args
directly.

\section configfiles_location Location of configuration files

\b UHD will look for up to three configuration files:

1. A system-wide configuration file. On Unix systems, the default location for
   this file is <b><tt>/etc/uhd/uhd.conf</tt></b>. On Windows systems,
   <b><tt>\%programdata%/uhd/uhd.conf</tt></b>. The default can be overwritten
   at compile time by setting `UHD_SYS_CONF_FILE` through CMake.
2. A user-specific configuration file. On Unix systems, it defaults to
   `$APPDATA/.uhd/uhd.conf`, where `$APPDATA` is usually the same as the user's
   home directory, unless `$APPDATA` or `$USER_CONFIG_DIR` are defined. On
   Windows systems, it simply resolves to <b><tt>\%appdata%</tt></b>.
   The default can be overwritten at compile time by setting
   the `UHD_USER_CONF_FILE` through CMake.
3. A configuration file specified by the environment variable `UHD_CONFIG_FILE`

UHD will read these files in this order (if they exist). Settings from one file
will overwrite those from a previous one, so if the same setting exists in the
system-wide file and the user-specific file, the settings from the
user-specific file will take effect. There is no error if a file does not
exist, or the environment variable is not set.

\b MPM will only look for a configuration file in `/etc/uhd/mpm.conf`, on the
device running MPM itself.

*/
// vim:ft=doxygen: