// SPDX-License-Identifier: GPL-2.0 OR X11
/*
 * Copyright (c) 2017 National Instruments Corp
 */

/dts-v1/;
/plugin/;

#include "n300-fpga.dtsi"

&fpga_full {
	nixge0: ethernet@40000000 {
		compatible = "ni,xge-enet-2.00";
		reg = <0x40000000 0x6000>;

		clocks = <&clkc 15>;
		clock-names = "bus_clk";

		nvmem-cells = <&eth1_addr>;
		nvmem-cell-names = "address";

		interrupts = <0 29 4>, <0 30 4>;
		interrupt-names = "rx", "tx";
		interrupt-parent = <&intc>;
		status = "okay";

		phy-mode = "xgmii";
		phy-handle = <&ethernet_phy1>;

		mdio {
			ethernet_phy1: ethernet-phy@4 {
				compatible = "ethernet-phy-ieee802.3-c45";
				reg = <4>;
			};
		};
	};

	uio@40006000 {
		compatible = "usrp-uio";
		reg = <0x40006000 0x2000>;
		reg-names = "misc-enet-regs0";
		status = "okay";
	};

	nixge1: ethernet@40008000 {
		compatible = "ni,xge-enet-2.00";
		reg = <0x40008000 0x6000>;

		clocks = <&clkc 15>;
		clock-names = "bus_clk";

		nvmem-cells = <&eth2_addr>;
		nvmem-cell-names = "address";

		interrupts = <0 31 4>, <0 32 4>;
		interrupt-names = "rx", "tx";
		interrupt-parent = <&intc>;
		status = "okay";

		phy-mode = "xgmii";
		phy-handle = <&ethernet_phy2>;

		mdio {
			ethernet_phy2: ethernet-phy@4 {
				compatible = "ethernet-phy-ieee802.3-c45";
				reg = <4>;
			};
		};
	};

	uio@4000e000 {
		compatible = "usrp-uio";
		reg = <0x4000e000 0x2000>;
		reg-names = "misc-enet-regs1";
		status = "okay";
	};
};

#include "n300-common.dtsi"
#include "dma-common.dtsi"