// // Copyright 2013 Ettus Research LLC // // radio top level module for b200 // Contains all clock-rate DSP components, all radio and hardware controls and settings module radio_b200 #( parameter RADIO_FIFO_SIZE = 13, parameter SAMPLE_FIFO_SIZE = 11 ) (input radio_clk, input radio_rst, input [31:0] rx, output [31:0] tx, inout [31:0] fe_atr, input pps, input bus_clk, input bus_rst, input [63:0] tx_tdata, input tx_tlast, input tx_tvalid, output tx_tready, output [63:0] rx_tdata, output rx_tlast, output rx_tvalid, input rx_tready, input [63:0] ctrl_tdata, input ctrl_tlast, input ctrl_tvalid, output ctrl_tready, output [63:0] resp_tdata, output resp_tlast, output resp_tvalid, input resp_tready, output [63:0] debug ); // /////////////////////////////////////////////////////////////////////////////// // FIFO Interfacing to the bus clk domain // in_tdata splits to tx_tdata and ctrl_tdata // rx_tdata and resp_tdata get muxed to out_tdata // Everything except rx flow control must cross in to radio_clk domain before further use // _b signifies bus_clk domain, _r signifies radio_clk domain wire [63:0] ctrl_tdata_r; wire ctrl_tready_r, ctrl_tvalid_r; wire ctrl_tlast_r; wire [63:0] resp_tdata_r; wire resp_tready_r, resp_tvalid_r; wire resp_tlast_r; wire [63:0] rx_tdata_r; wire rx_tready_r, rx_tvalid_r; wire rx_tlast_r; wire [63:0] rx_mux_tdata_r; wire rx_mux_tready_r, rx_mux_tvalid_r; wire rx_mux_tlast_r; wire [63:0] rx_err_tdata_r; wire rx_err_tready_r, rx_err_tvalid_r; wire rx_err_tlast_r; wire [63:0] tx_tdata_r; wire tx_tready_r, tx_tvalid_r; wire tx_tlast_r; wire [63:0] txresp_tdata, txresp_tdata_r; wire txresp_tready, txresp_tready_r, txresp_tvalid, txresp_tvalid_r; wire txresp_tlast, txresp_tlast_r; wire [63:0] rmux_tdata_r; wire rmux_tlast_r, rmux_tvalid_r, rmux_tready_r; wire [63:0] rx_tdata_int; wire rx_tready_int, rx_tvalid_int; wire rx_tlast_int; axi_fifo_2clk #(.WIDTH(65), .SIZE(0/*minimal*/)) ctrl_fifo (.reset(bus_rst), .i_aclk(bus_clk), .i_tvalid(ctrl_tvalid), .i_tready(ctrl_tready), .i_tdata({ctrl_tlast, ctrl_tdata}), .o_aclk(radio_clk), .o_tvalid(ctrl_tvalid_r), .o_tready(ctrl_tready_r), .o_tdata({ctrl_tlast_r, ctrl_tdata_r})); axi_fifo_2clk #(.WIDTH(65), .SIZE(RADIO_FIFO_SIZE)) tx_fifo (.reset(bus_rst), .i_aclk(bus_clk), .i_tvalid(tx_tvalid), .i_tready(tx_tready), .i_tdata({tx_tlast, tx_tdata}), .o_aclk(radio_clk), .o_tvalid(tx_tvalid_r), .o_tready(tx_tready_r), .o_tdata({tx_tlast_r, tx_tdata_r})); axi_fifo_2clk #(.WIDTH(65), .SIZE(0/*minimal*/)) resp_fifo (.reset(radio_rst), .i_aclk(radio_clk), .i_tvalid(rmux_tvalid_r), .i_tready(rmux_tready_r), .i_tdata({rmux_tlast_r, rmux_tdata_r}), .o_aclk(bus_clk), .o_tvalid(resp_tvalid), .o_tready(resp_tready), .o_tdata({resp_tlast, resp_tdata})); axi_fifo_2clk #(.WIDTH(65), .SIZE(0)) rx_fifo (.reset(radio_rst), .i_aclk(radio_clk), .i_tvalid(rx_mux_tvalid_r), .i_tready(rx_mux_tready_r), .i_tdata({rx_mux_tlast_r, rx_mux_tdata_r}), .o_aclk(bus_clk), .o_tvalid(rx_tvalid_int), .o_tready(rx_tready_int), .o_tdata({rx_tlast_int, rx_tdata_int})); axi_packet_gate #(.WIDTH(64), .SIZE(RADIO_FIFO_SIZE)) buffer_whole_pkt ( .clk(bus_clk), .reset(bus_rst), .clear(1'b0), .i_tdata(rx_tdata_int), .i_tlast(rx_tlast_int), .i_terror(1'b0), .i_tvalid(rx_tvalid_int), .i_tready(rx_tready_int), .o_tdata(rx_tdata), .o_tlast(rx_tlast), .o_tvalid(rx_tvalid), .o_tready(rx_tready) ); // ///////////////////////////////////////////////////////////////////////////////////// // Setting bus and controls localparam SR_SPI = 8'd8; localparam SR_ATR = 8'd12; localparam SR_TEST = 8'd21; localparam SR_CODEC_IDLE = 8'd22; localparam SR_READBACK = 8'd32; localparam SR_TX_CTRL = 8'd64; localparam SR_RX_CTRL = 8'd96; localparam SR_RX_DSP = 8'd144; localparam SR_TX_DSP = 8'd184; localparam SR_TIME = 8'd128; localparam SR_RX_FMT = 8'd136; localparam SR_TX_FMT = 8'd138; wire set_stb; wire [7:0] set_addr; wire [31:0] set_data; wire [31:0] test_readback; wire run_rx, run_tx; reg [63:0] rb_data; wire [1:0] rb_addr; wire [63:0] vita_time, vita_time_lastpps; timekeeper #(.BASE(SR_TIME)) timekeeper (.clk(radio_clk), .reset(radio_rst), .pps(pps), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .vita_time(vita_time), .vita_time_lastpps(vita_time_lastpps)); radio_ctrl_proc radio_ctrl_proc (.clk(radio_clk), .reset(radio_rst), .clear(1'b0), .ctrl_tdata(ctrl_tdata_r), .ctrl_tlast(ctrl_tlast_r), .ctrl_tvalid(ctrl_tvalid_r), .ctrl_tready(ctrl_tready_r), .resp_tdata(resp_tdata_r), .resp_tlast(resp_tlast_r), .resp_tvalid(resp_tvalid_r), .resp_tready(resp_tready_r), .vita_time(vita_time), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .ready(1'b1), .readback(rb_data), .debug()); always @* case(rb_addr) 2'd0 : rb_data <= { 32'b0, test_readback }; 2'd1 : rb_data <= vita_time; 2'd2 : rb_data <= vita_time_lastpps; 2'd3 : rb_data <= {tx, rx}; default : rb_data <= 64'd0; endcase // case (rb_addr) setting_reg #(.my_addr(SR_TEST), .awidth(8), .width(32)) sr_test (.clk(radio_clk), .rst(radio_rst), .strobe(set_stb), .addr(set_addr), .in(set_data), .out(test_readback), .changed()); wire [31:0] tx_idle; setting_reg #(.my_addr(SR_CODEC_IDLE), .awidth(8), .width(32)) sr_codec_idle (.clk(radio_clk), .rst(radio_rst), .strobe(set_stb), .addr(set_addr), .in(set_data), .out(tx_idle), .changed()); setting_reg #(.my_addr(SR_READBACK), .awidth(8), .width(2)) sr_rdback (.clk(radio_clk), .rst(radio_rst), .strobe(set_stb), .addr(set_addr), .in(set_data), .out(rb_addr), .changed()); gpio_atr #(.BASE(SR_ATR), .WIDTH(32)) gpio_atr (.clk(radio_clk),.reset(radio_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .rx(run_rx), .tx(run_tx), .gpio(fe_atr), .gpio_readback() ); // ///////////////////////////////////////////////////////////////////////////////// // TX Chain wire [175:0] txsample_tdata; wire txsample_tvalid, txsample_tready; wire [31:0] sample_tx; wire ack_or_error, packet_consumed; wire [11:0] seqnum; wire [63:0] error_code; wire [31:0] sid; wire [23:0] tx_fe_i, tx_fe_q; wire [31:0] debug_tx_control; assign tx[31:16] = (run_tx)? tx_fe_i[23:8] : tx_idle[31:16]; assign tx[15:0] = (run_tx)? tx_fe_q[23:8] : tx_idle[15:0]; wire [63:0] tx_tdata_i; wire tx_tlast_i, tx_tvalid_i, tx_tready_i; new_tx_deframer tx_deframer (.clk(radio_clk), .reset(radio_rst), .clear(1'b0), .i_tdata(tx_tdata_i), .i_tlast(tx_tlast_i), .i_tvalid(tx_tvalid_i), .i_tready(tx_tready_i), .sample_tdata(txsample_tdata), .sample_tvalid(txsample_tvalid), .sample_tready(txsample_tready)); new_tx_control #(.BASE(SR_TX_CTRL)) tx_control (.clk(radio_clk), .reset(radio_rst), .clear(1'b0), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .vita_time(vita_time), .ack_or_error(ack_or_error), .packet_consumed(packet_consumed), .seqnum(seqnum), .error_code(error_code), .sid(sid), .sample_tdata(txsample_tdata), .sample_tvalid(txsample_tvalid), .sample_tready(txsample_tready), .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), .debug(debug_tx_control)); tx_responder #(.BASE(SR_TX_CTRL+2)) tx_responder (.clk(radio_clk), .reset(radio_rst), .clear(1'b0), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .ack_or_error(ack_or_error), .packet_consumed(packet_consumed), .seqnum(seqnum), .error_code(error_code), .sid(sid), .vita_time(vita_time), .o_tdata(txresp_tdata_r), .o_tlast(txresp_tlast_r), .o_tvalid(txresp_tvalid_r), .o_tready(txresp_tready_r)); duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0), .WIDTH(24)) duc_chain (.clk(radio_clk), .rst(radio_rst), .clr(1'b0), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), .debug() ); chdr_xxxx_to_16sc_chain #(.BASE(SR_TX_FMT)) convert_xxxx_to_16sc (.clk(radio_clk), .reset(radio_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .i_tdata(tx_tdata_r), .i_tlast(tx_tlast_r), .i_tvalid(tx_tvalid_r), .i_tready(tx_tready_r), .o_tdata(tx_tdata_i), .o_tlast(tx_tlast_i), .o_tvalid(tx_tvalid_i), .o_tready(tx_tready_i)); // ///////////////////////////////////////////////////////////////////////////////// // RX Chain wire full, eob_rx; wire strobe_rx; wire [31:0] sample_rx; wire [31:0] rx_sid; wire [11:0] rx_seqnum; wire [63:0] rx_tdata_i; wire rx_tlast_i, rx_tvalid_i, rx_tready_i; new_rx_framer #(.BASE(SR_RX_CTRL+4),.SAMPLE_FIFO_SIZE(SAMPLE_FIFO_SIZE)) new_rx_framer (.clk(radio_clk), .reset(radio_rst), .clear(1'b0), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .vita_time(vita_time), .strobe(strobe_rx), .sample(sample_rx), .run(run_rx), .eob(eob_rx), .full(full), .sid(rx_sid), .seqnum(rx_seqnum), .o_tdata(rx_tdata_i), .o_tlast(rx_tlast_i), .o_tvalid(rx_tvalid_i), .o_tready(rx_tready_i), .debug()); new_rx_control #(.BASE(SR_RX_CTRL)) new_rx_control (.clk(radio_clk), .reset(radio_rst), .clear(1'b0), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .vita_time(vita_time), .strobe(strobe_rx), .run(run_rx), .eob(eob_rx), .full(full), .sid(rx_sid), .seqnum(rx_seqnum), .err_tdata(rx_err_tdata_r), .err_tlast(rx_err_tlast_r), .err_tvalid(rx_err_tvalid_r), .err_tready(rx_err_tready_r), .debug()); ddc_chain #(.BASE(SR_RX_DSP), .DSPNO(0), .WIDTH(24)) ddc_chain (.clk(radio_clk), .rst(radio_rst), .clr(1'b0), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .rx_fe_i({rx[31:16],8'd0}),.rx_fe_q({rx[15:0],8'd0}), .sample(sample_rx), .run(run_rx), .strobe(strobe_rx), .debug() ); chdr_16sc_to_xxxx_chain #(.BASE(SR_RX_FMT)) convert_16sc_to_xxxx (.clk(radio_clk), .reset(radio_rst), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .i_tdata(rx_tdata_i), .i_tlast(rx_tlast_i), .i_tvalid(rx_tvalid_i), .i_tready(rx_tready_i), .o_tdata(rx_tdata_r), .o_tlast(rx_tlast_r), .o_tvalid(rx_tvalid_r), .o_tready(rx_tready_r)); // ///////////////////////////////////////////////////////////////////////////////// // RX Channel Muxing axi_mux4 #(.PRIO(1), .WIDTH(64)) rx_mux (.clk(radio_clk), .reset(radio_rst), .clear(1'b0), .i0_tdata(rx_tdata_r), .i0_tlast(rx_tlast_r), .i0_tvalid(rx_tvalid_r), .i0_tready(rx_tready_r), .i1_tdata(rx_err_tdata_r), .i1_tlast(rx_err_tlast_r), .i1_tvalid(rx_err_tvalid_r), .i1_tready(rx_err_tready_r), .i2_tdata(), .i2_tlast(), .i2_tvalid(1'b0), .i2_tready(), .i3_tdata(), .i3_tlast(), .i3_tvalid(1'b0), .i3_tready(), .o_tdata(rx_mux_tdata_r), .o_tlast(rx_mux_tlast_r), .o_tvalid(rx_mux_tvalid_r), .o_tready(rx_mux_tready_r)); // ///////////////////////////////////////////////////////////////////////////////// // Response Channel Muxing axi_mux4 #(.PRIO(0), .WIDTH(64)) response_mux (.clk(radio_clk), .reset(radio_rst), .clear(1'b0), .i0_tdata(txresp_tdata_r), .i0_tlast(txresp_tlast_r), .i0_tvalid(txresp_tvalid_r), .i0_tready(txresp_tready_r), .i1_tdata(resp_tdata_r), .i1_tlast(resp_tlast_r), .i1_tvalid(resp_tvalid_r), .i1_tready(resp_tready_r), .i2_tdata(), .i2_tlast(), .i2_tvalid(1'b0), .i2_tready(), .i3_tdata(), .i3_tlast(), .i3_tvalid(1'b0), .i3_tready(), .o_tdata(rmux_tdata_r), .o_tlast(rmux_tlast_r), .o_tvalid(rmux_tvalid_r), .o_tready(rmux_tready_r)); // DEBUG LOGIC - NOT FOR PRODUCTION assign debug = 0; endmodule // radio_b200