// // Copyright 2011-2013 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see . // module u1plus_core #( parameter NUM_RX_DSPS = 2, parameter CTRL_ACK_SID = 20, //needed for reply parameter DSP_TX_FIFOSIZE = 10, //4K MTU parameter DSP_RX_FIFOSIZE = 10, //4K MTU parameter DSP_RX_XTRA_FIFOSIZE = 11, parameter DSP_TX_XTRA_FIFOSIZE = 11, parameter USE_PACKET_PADDER = 0 ) (input clk, input reset, output [31:0] debug, output [1:0] debug_clk, // Host Interface input [35:0] tx_data, input tx_src_rdy, output tx_dst_rdy, output [35:0] rx_data, output rx_src_rdy, input rx_dst_rdy, input [35:0] ctrl_data, input ctrl_src_rdy, output ctrl_dst_rdy, output [35:0] resp_data, output resp_src_rdy, input resp_dst_rdy, output dsp_rx_run, output dsp_tx_run, output clock_sync, inout db_sda, inout db_scl, output sclk, output [7:0] sen, output mosi, input miso, inout [15:0] io_tx, inout [15:0] io_rx, output [13:0] tx_i, output [13:0] tx_q, input [11:0] rx_i, input [11:0] rx_q, input pps_in ); localparam SR_MISC = 0; // 5 localparam SR_USER_REGS = 5; // 2 localparam SR_PADDER = 10; // 2 localparam SR_TX_CTRL = 32; // 6 localparam SR_TX_DSP = 40; // 5 localparam SR_TX_FE = 48; // 5 localparam SR_RX_CTRL0 = 96; // 9 localparam SR_RX_DSP0 = 106; // 7 localparam SR_RX_FE = 114; // 5 localparam SR_RX_CTRL1 = 128; // 9 localparam SR_RX_DSP1 = 138; // 7 localparam SR_TIME64 = 192; // 6 localparam SR_SPI = 208; // 3 localparam SR_I2C = 216; // 1 localparam SR_GPIO = 224; // 5 //compatibility number -> increment when the fpga has been sufficiently altered localparam compat_num = {16'd11, 16'd4}; //major, minor //assign run signals used for ATR logic wire [NUM_RX_DSPS-1:0] run_rx_n; wire run_tx; wire run_rx = |(run_rx_n); assign dsp_rx_run = run_rx; assign dsp_tx_run = run_tx; //shared time core signals wire [63:0] vita_time, vita_time_pps; //shared settings bus signals wire set_stb, set_stb_user; wire [31:0] set_data, set_data_user; wire [7:0] set_addr, set_addr_user; //shared SPI core signals wire [31:0] spi_readback; wire spi_ready; //shared I2C core signals wire [31:0] i2c_readback; wire i2c_ready; //shared GPIO core signals wire [31:0] gpio_readback; /////////////////////////////////////////////////////////////////////////// // Misc Registers - persistent across resets /////////////////////////////////////////////////////////////////////////// wire [31:0] config_word0; setting_reg #(.my_addr(SR_MISC+0), .width(32)) sr_misc_config0 (.clk(clk), .rst(1'b0/*reset*/), .strobe(set_stb), .addr(set_addr), .in(set_data), .out(config_word0)); wire [31:0] config_word1; setting_reg #(.my_addr(SR_MISC+1), .width(32)) sr_misc_config1 (.clk(clk), .rst(1'b0/*reset*/), .strobe(set_stb), .addr(set_addr), .in(set_data), .out(config_word1)); wire clock_sync_inv, clock_sync_enb; setting_reg #(.my_addr(SR_MISC+2), .width(2)) sr_misc_clock_sync (.clk(clk), .rst(reset), .strobe(set_stb), .addr(set_addr), .in(set_data), .out({clock_sync_inv, clock_sync_enb})); /////////////////////////////////////////////////////////////////////////// // Settings Bus and Readback /////////////////////////////////////////////////////////////////////////// user_settings #(.BASE(SR_USER_REGS)) user_settings (.clk(clk),.rst(reset), .set_stb(set_stb), .set_addr(set_addr),.set_data(set_data), .set_addr_user(set_addr_user),.set_data_user(set_data_user), .set_stb_user(set_stb_user) ); wire [35:0] ctrl_out_data, ctrl_int_data; wire ctrl_out_src_rdy, ctrl_out_dst_rdy; wire ctrl_int_src_rdy, ctrl_int_dst_rdy; fifo_cascade #(.WIDTH(36), .SIZE(9)) ctrl_fifo (.clk(clk), .reset(reset), .clear(1'b0), .datain(ctrl_data), .src_rdy_i(ctrl_src_rdy), .dst_rdy_o(ctrl_dst_rdy), .space(), .dataout(ctrl_int_data), .src_rdy_o(ctrl_int_src_rdy), .dst_rdy_i(ctrl_int_dst_rdy), .occupied()); wire [31:0] num_rx_dsps_rb = NUM_RX_DSPS; wire [31:0] sfc_debug; settings_fifo_ctrl #(.PROT_HDR(0), .ACK_SID(CTRL_ACK_SID), .XPORT_HDR(0)) sfc ( .clock(clk), .reset(reset), .clear(1'b0), .vita_time(vita_time), .perfs_ready(spi_ready & i2c_ready), .in_data(ctrl_int_data), .in_valid(ctrl_int_src_rdy), .in_ready(ctrl_int_dst_rdy), .out_data(ctrl_out_data), .out_valid(ctrl_out_src_rdy), .out_ready(ctrl_out_dst_rdy), .strobe(set_stb), .addr(set_addr), .data(set_data), .word00(spi_readback),.word01(compat_num),.word02(i2c_readback),.word03(gpio_readback), .word04(config_word0),.word05(config_word1),.word06(num_rx_dsps_rb),.word07(32'hffff_ffff), .word08(32'hffff_ffff),.word09(32'hffff_ffff),.word10(vita_time[63:32]), .word11(vita_time[31:0]),.word12(32'hffff_ffff),.word13(32'hffff_ffff), .word14(vita_time_pps[63:32]),.word15(vita_time_pps[31:0]), .debug(sfc_debug) ); /////////////////////////////////////////////////////////////////////////// // Time Core /////////////////////////////////////////////////////////////////////////// time_64bit #(.BASE(SR_TIME64)) time_64bit (.clk(clk), .rst(reset), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .pps(pps_in), .vita_time(vita_time), .vita_time_pps(vita_time_pps), .exp_time_in(0)); assign clock_sync = (clock_sync_enb)? (pps_in ^ clock_sync_inv) : 1'b0; /////////////////////////////////////////////////////////////////////////// // SPI Core /////////////////////////////////////////////////////////////////////////// simple_spi_core #(.BASE(SR_SPI), .WIDTH(8), .CLK_IDLE(0), .SEN_IDLE(8'hff)) simple_spi_core (.clock(clk), .reset(reset), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .readback(spi_readback), .ready(spi_ready), .sen(sen), .sclk(sclk), .mosi(mosi), .miso(miso)); /////////////////////////////////////////////////////////////////////////// // I2C Core /////////////////////////////////////////////////////////////////////////// wire scl_pad_i, scl_pad_o, scl_pad_oen_o, sda_pad_i, sda_pad_o, sda_pad_oen_o; simple_i2c_core #(.BASE(SR_I2C)) i2c_core (.clock(clk),.reset(reset), .set_stb(set_stb), .set_addr(set_addr), .set_data(set_data), .readback(i2c_readback), .ready(i2c_ready), .scl_pad_i(scl_pad_i),.scl_pad_o(scl_pad_o),.scl_padoen_o(scl_pad_oen_o), .sda_pad_i(sda_pad_i),.sda_pad_o(sda_pad_o),.sda_padoen_o(sda_pad_oen_o) ); // I2C -- Don't use external transistors for open drain, the FPGA implements this IOBUF scl_pin(.O(scl_pad_i), .IO(db_scl), .I(scl_pad_o), .T(scl_pad_oen_o)); IOBUF sda_pin(.O(sda_pad_i), .IO(db_sda), .I(sda_pad_o), .T(sda_pad_oen_o)); /////////////////////////////////////////////////////////////////////////// // GPIO Core /////////////////////////////////////////////////////////////////////////// gpio_atr #(.BASE(SR_GPIO), .WIDTH(32)) gpio_atr(.clk(clk),.reset(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .rx(run_rx), .tx(run_tx), .gpio({io_tx, io_rx}), .gpio_readback(gpio_readback) ); // ///////////////////////////////////////////////////////////////////////// // RX ADC Frontend, does IQ Balance, DC Offset, muxing wire [23:0] rx_fe_i, rx_fe_q; // 24 bits is total overkill here, but it matches u2/u2p rx_frontend #(.BASE(SR_RX_FE)) rx_frontend (.clk(clk),.rst(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .adc_a({rx_i,4'b00}),.adc_ovf_a(0), .adc_b({rx_q,4'b00}),.adc_ovf_b(0), .i_out(rx_fe_i), .q_out(rx_fe_q), .run(run_rx), .debug()); // ///////////////////////////////////////////////////////////////////////// // DSP RX * wire [35:0] rx_int2_data [NUM_RX_DSPS-1:0]; wire rx_int2_src_rdy [NUM_RX_DSPS-1:0]; wire rx_int2_dst_rdy [NUM_RX_DSPS-1:0]; genvar dspno; generate for(dspno = 0; dspno < NUM_RX_DSPS; dspno = dspno + 1) begin:gen_rx_dsps wire [31:0] sample_rx; wire strobe_rx, clear_rx; wire [35:0] vita_rx_data; wire vita_rx_src_rdy, vita_rx_dst_rdy; wire [35:0] int_rx_data; wire int_rx_src_rdy, int_rx_dst_rdy; ddc_chain #(.BASE(SR_RX_DSP0+dspno*32), .DSPNO(dspno)) ddc_chain (.clk(clk), .rst(reset), .clr(clear_rx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .rx_fe_i(rx_fe_i),.rx_fe_q(rx_fe_q), .sample(sample_rx), .run(run_rx_n[dspno]), .strobe(strobe_rx), .debug() ); vita_rx_chain #(.BASE(SR_RX_CTRL0+dspno*32), .UNIT(dspno), .FIFOSIZE(DSP_RX_FIFOSIZE), .PROT_ENG_FLAGS(0), .DSP_NUMBER(dspno)) vita_rx_chain (.clk(clk),.reset(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .overrun(), .sample(sample_rx), .run(run_rx_n[dspno]), .strobe(strobe_rx), .clear_o(clear_rx), .rx_data_o(vita_rx_data), .rx_dst_rdy_i(vita_rx_dst_rdy), .rx_src_rdy_o(vita_rx_src_rdy), .debug() ); fifo_cascade #(.WIDTH(36), .SIZE(DSP_RX_FIFOSIZE+1)) rx_data_fifo (.clk(clk), .reset(reset), .clear(1'b0), .datain(vita_rx_data), .src_rdy_i(vita_rx_src_rdy), .dst_rdy_o(vita_rx_dst_rdy), .space(), .dataout(int_rx_data), .src_rdy_o(int_rx_src_rdy), .dst_rdy_i(int_rx_dst_rdy), .occupied()); if (dspno == 0) begin assign rx_int2_data[dspno] = int_rx_data; assign rx_int2_src_rdy[dspno] = int_rx_src_rdy; assign int_rx_dst_rdy = rx_int2_dst_rdy[dspno]; end else begin fifo36_mux #(.prio(0)) // No priority, fair sharing combine_rx_dsps ( .clk(clk), .reset(reset), .clear(1'b0/*noclear*/), .data0_i(rx_int2_data[dspno-1]), .src0_rdy_i(rx_int2_src_rdy[dspno-1]), .dst0_rdy_o(rx_int2_dst_rdy[dspno-1]), .data1_i(int_rx_data), .src1_rdy_i(int_rx_src_rdy), .dst1_rdy_o(int_rx_dst_rdy), .data_o(rx_int2_data[dspno]), .src_rdy_o(rx_int2_src_rdy[dspno]), .dst_rdy_i(rx_int2_dst_rdy[dspno]) ); end end endgenerate // ///////////////////////////////////////////////////////////////////////// // RX Stream muxing wire [35:0] rx_int3_data; wire rx_int3_src_rdy, rx_int3_dst_rdy; fifo_cascade #(.WIDTH(36), .SIZE(DSP_RX_XTRA_FIFOSIZE)) rx_data_fifo_combined (.clk(clk), .reset(reset), .clear(1'b0), .datain(rx_int2_data[NUM_RX_DSPS-1]), .src_rdy_i(rx_int2_src_rdy[NUM_RX_DSPS-1]), .dst_rdy_o(rx_int2_dst_rdy[NUM_RX_DSPS-1]), .space(), .dataout(rx_int3_data), .src_rdy_o(rx_int3_src_rdy), .dst_rdy_i(rx_int3_dst_rdy), .occupied()); generate if (USE_PACKET_PADDER) begin packet_padder36 #(.BASE(SR_PADDER)) packet_padder_rx_data36( .clk(clk), .reset(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .data_i(rx_int3_data), .src_rdy_i(rx_int3_src_rdy), .dst_rdy_o(rx_int3_dst_rdy), .data_o(rx_data), .src_rdy_o(rx_src_rdy), .dst_rdy_i(rx_dst_rdy), .always_flush(~dsp_rx_run)); end else begin assign rx_data = rx_int3_data; assign rx_src_rdy = rx_int3_src_rdy; assign rx_int3_dst_rdy = rx_dst_rdy; end endgenerate /////////////////////////////////////////////////////////////////////////// // MUX for TX async and resp data /////////////////////////////////////////////////////////////////////////// wire [35:0] tx_err_data, resp_data_int; wire tx_err_src_rdy, resp_src_rdy_int; wire tx_err_dst_rdy, resp_dst_rdy_int; fifo36_mux #(.prio(0)) // No priority, fair sharing combine_async_and_resp ( .clk(clk), .reset(reset), .clear(1'b0/*noclear*/), .data0_i(ctrl_out_data), .src0_rdy_i(ctrl_out_src_rdy), .dst0_rdy_o(ctrl_out_dst_rdy), .data1_i(tx_err_data), .src1_rdy_i(tx_err_src_rdy), .dst1_rdy_o(tx_err_dst_rdy), .data_o(resp_data_int), .src_rdy_o(resp_src_rdy_int), .dst_rdy_i(resp_dst_rdy_int) ); fifo_cascade #(.WIDTH(36), .SIZE(9)) resp_fifo (.clk(clk), .reset(reset), .clear(1'b0), .datain(resp_data_int), .src_rdy_i(resp_src_rdy_int), .dst_rdy_o(resp_dst_rdy_int), .space(), .dataout(resp_data), .src_rdy_o(resp_src_rdy), .dst_rdy_i(resp_dst_rdy), .occupied()); // /////////////////////////////////////////////////////////////////////////////////// // DSP TX wire [23:0] tx_fe_i, tx_fe_q; wire [31:0] sample_tx; wire strobe_tx, clear_tx; `ifdef DISABLE_TX_DSP assign tx_dst_rdy = 1; //null sink assign run_tx = 0; assign tx_i = 0; assign tx_q = 0; `else vita_tx_chain #(.BASE(SR_TX_CTRL), .FIFOSIZE(DSP_TX_FIFOSIZE), .POST_ENGINE_FIFOSIZE(DSP_TX_XTRA_FIFOSIZE), .REPORT_ERROR(1), .DO_FLOW_CONTROL(0), .PROT_ENG_FLAGS(0), .USE_TRANS_HEADER(0), .DSP_NUMBER(0)) vita_tx_chain (.clk(clk), .reset(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .vita_time(vita_time), .tx_data_i(tx_data), .tx_src_rdy_i(tx_src_rdy), .tx_dst_rdy_o(tx_dst_rdy), .err_data_o(tx_err_data), .err_src_rdy_o(tx_err_src_rdy), .err_dst_rdy_i(tx_err_dst_rdy), .sample(sample_tx), .strobe(strobe_tx), .underrun(), .run(run_tx), .clear_o(clear_tx), .debug()); duc_chain #(.BASE(SR_TX_DSP), .DSPNO(0)) duc_chain (.clk(clk), .rst(reset), .clr(clear_tx), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .set_stb_user(set_stb_user), .set_addr_user(set_addr_user), .set_data_user(set_data_user), .tx_fe_i(tx_fe_i),.tx_fe_q(tx_fe_q), .sample(sample_tx), .run(run_tx), .strobe(strobe_tx), .debug() ); tx_frontend #(.BASE(SR_TX_FE), .WIDTH_OUT(14)) tx_frontend (.clk(clk), .rst(reset), .set_stb(set_stb),.set_addr(set_addr),.set_data(set_data), .tx_i(tx_fe_i), .tx_q(tx_fe_q), .run(1'b1), .dac_a(tx_i), .dac_b(tx_q)); `endif // ///////////////////////////////////////////////////////////////////////////////////// // Debug circuitry assign debug_clk = 2'b11; assign debug = 32'hffffffff; endmodule // u1plus_core