//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//


// TX side of flow control -- when other side sends PAUSE, we wait

module flow_ctrl_tx
  (input        rst,
   input        tx_clk,
   //host processor
   input        tx_pause_en,
   // From MAC_rx_ctrl
   input [15:0] pause_quanta,
   input        pause_quanta_val,
   // MAC_tx_ctrl
   output       pause_apply,
   input        paused);
     
   // ******************************************************************************        
   // Inhibit our TX from transmitting because they sent us a PAUSE frame
   // ******************************************************************************

   // Pauses are in units of 512 bit times, or 64 bytes/clock cycles, and can be
   //   as big as 16 bits, so 22 bits are needed for the counter
   
   reg [15+6:0] pause_quanta_counter;
   reg 		pqval_d1, pqval_d2;		

   always @(posedge tx_clk) pqval_d1 <= pause_quanta_val;
   always @(posedge tx_clk) pqval_d2 <= pqval_d1;

   always @ (posedge tx_clk or posedge rst)
     if (rst)
       pause_quanta_counter <= 0;
     else if (pqval_d1 & ~pqval_d2)
       pause_quanta_counter <= {pause_quanta, 6'b0}; 
     else if((pause_quanta_counter!=0) & paused)
       pause_quanta_counter <= pause_quanta_counter - 1;

   assign	pause_apply = tx_pause_en & (pause_quanta_counter != 0);
   
endmodule // flow_ctrl