//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//

module hb_dec_tb( ) ;
   
    // Parameters for instantiation
    parameter               clocks  = 9'd12 ; // Number of clocks per input
    parameter               decim   = 1 ; // Sets the filter to decimate
    parameter               rate    = 2 ; // Sets the decimation rate

    reg                     clock ;
    reg                     reset ;
    reg                     enable ;
    reg                     strobe_in ;
    reg     signed  [23:0]  data_in ;
    wire                    strobe_out ;
    wire    signed  [23:0]  data_out ;

   initial
     begin
	$dumpfile("hb_dec_tb.vcd");
	$dumpvars(0,hb_dec_tb);
     end
   
    // Setup the clock
    initial clock = 1'b0 ;
    always #5 clock <= ~clock ;

    // Come out of reset after a while
    initial reset = 1'b1 ;
    initial #1000 reset = 1'b0 ;

    // Enable the entire system
    initial enable = 1'b1 ;

    // Instantiate UUT
   /*
    halfband_ideal 
      #(
        .decim      ( decim         ),
        .rate       ( rate          )
      ) uut(
        .clock      ( clock         ),
        .reset      ( reset         ),
        .enable     ( enable        ),
        .strobe_in  ( strobe_in     ),
        .data_in    ( data_in       ),
        .strobe_out ( strobe_out    ),
        .data_out   ( data_out      )
      ) ;
    */

   
   hb_dec #(.WIDTH(24)) uut
     (.clk(clock),.rst(reset),.bypass(0),.run(1),.cpi(clocks),.stb_in(strobe_in),.data_in(data_in),
      .stb_out(strobe_out),.data_out(data_out) );
   
    integer i, ri, ro, infile, outfile ;

   always @(posedge clock)
     begin
	if(strobe_out)
	  $display(data_out);
     end
   
    // Setup file IO
    initial begin
        infile = $fopen("input.dat","r") ;
        outfile = $fopen("output.dat","r") ;
        $timeformat(-9, 2, " ns", 10) ;
    end

    reg                 endofsim ;
    reg signed  [17:0]  compare ;
    integer             noe ;
    initial             noe = 0 ;

    initial begin
        // Initialize inputs
        strobe_in <= 1'd0 ;
        data_in <= 18'd0 ;

        // Wait for reset to go away
        @(negedge reset) #0 ;
        
        // While we're still simulating ...
        while( !endofsim ) begin

            // Write the input from the file or 0 if EOF...
            @( posedge clock ) begin
               //#1 ;
                strobe_in <= 1'b1 ;
                if( !$feof(infile) )
                    ri = $fscanf( infile, "%d", data_in ) ;
                else
                    data_in <= 18'd0 ;
            end

            // Clocked in - set the strobe to 0 if the number of
            // clocks per sample is greater than 1
            if( clocks > 1 ) begin
                @(posedge clock) begin
                    strobe_in <= 1'b0  ;
                end

                // Wait for the specified number of cycles
                for( i = 0 ; i < (clocks-2) ; i = i + 1 ) begin
                    @(posedge clock) #1 ;
                end
            end
        end

        // Print out the number of errors that occured
        if( noe )
            $display( "FAILED: %d errors during simulation", noe ) ;
        else
            $display( "PASSED: Simulation successful" ) ;

        $finish ;
    end

   // Output comparison of simulated values versus known good values
   always @ (posedge clock) begin
      if( reset )
        endofsim <= 1'b0 ;
      else begin
         if( !$feof(outfile) ) begin
            if( strobe_out ) begin
               ro = $fscanf( outfile, "%d\n", compare ) ;
               if( compare != data_out ) begin
                  //$display( "%t: %d != %d", $realtime, data_out, compare ) ;
                  noe = noe + 1 ;
               end
            end
         end else begin
            // Signal end of simulation when no more outputs
            endofsim <= 1'b1 ;
         end
      end
   end     

endmodule // hb_dec_tb