// Copyright 2011-2013 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see . // module dspengine_16to8 #(parameter BASE = 0, parameter BUF_SIZE = 9) (input clk, input reset, input clear, input set_stb, input [7:0] set_addr, input [31:0] set_data, output access_we, output access_stb, input access_ok, output access_done, output access_skip_read, output [BUF_SIZE-1:0] access_adr, input [BUF_SIZE-1:0] access_len, output [35:0] access_dat_o, input [35:0] access_dat_i ); wire convert; setting_reg #(.my_addr(BASE),.width(1)) sr_16to8 (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),.out(convert),.changed()); reg [2:0] dsp_state; localparam DSP_IDLE = 0; localparam DSP_PARSE_HEADER = 1; localparam DSP_CONVERT = 2; localparam DSP_CONVERT_DRAIN_PIPE = 3; localparam DSP_READ_TRAILER = 4; localparam DSP_WRITE_TRAILER = 5; localparam DSP_WRITE_HEADER = 6; localparam DSP_DONE = 7; // Parse VITA header wire is_if_data = (access_dat_i[31:29] == 3'b000); wire has_streamid = access_dat_i[28]; wire has_classid = access_dat_i[27]; wire has_trailer = access_dat_i[26]; // 25:24 reserved, aka SOB/EOB wire has_secs = |access_dat_i[23:22]; wire has_tics = |access_dat_i[21:20]; wire [3:0] hdr_length = 1 + has_streamid + has_classid + has_classid + has_secs + has_tics + has_tics; wire [35:0] prod_i, prod_q; wire [15:0] scaled_i, scaled_q; wire [7:0] i8, q8; reg [7:0] i8_reg, q8_reg; wire stb_read, stb_clip, val_read, val_clip; wire stb_out, stb_reg; reg even; reg [BUF_SIZE-1:0] read_adr, write_adr; reg has_trailer_reg; wire last = (read_adr + 1) == (access_len - has_trailer_reg); wire last_o, even_o; wire stb_write = stb_out & (even_o | last_o); wire send_to_pipe = ~stb_write & (dsp_state == DSP_CONVERT); reg [31:0] new_header, new_trailer, trailer_mask; reg [15:0] length; reg wait_for_trailer; always @(posedge clk) if(reset | clear) dsp_state <= DSP_IDLE; else case(dsp_state) DSP_IDLE : begin read_adr <= 0; write_adr <= 0; even <= 0; if(access_ok) dsp_state <= DSP_PARSE_HEADER; end DSP_PARSE_HEADER : begin has_trailer_reg <= has_trailer; new_header[31:16] <= access_dat_i[31:16]; new_header[15:0] <= access_len; length <= access_len; if(is_if_data & convert) begin read_adr <= hdr_length; write_adr <= hdr_length; dsp_state <= DSP_CONVERT; end else dsp_state <= DSP_WRITE_HEADER; end DSP_CONVERT: begin new_header[26] <= 1'b1; // all converted packets have a trailer if(stb_write) write_adr <= write_adr + 1; else if(stb_read) // should always be 1 if we are here begin read_adr <= read_adr + 1; even <= ~even; if(last) begin dsp_state <= DSP_CONVERT_DRAIN_PIPE; if(~even) trailer_mask <= 32'h00400400; else trailer_mask <= 32'h00400000; end end end DSP_CONVERT_DRAIN_PIPE : if(stb_write) begin write_adr <= write_adr + 1; if(last_o) if(has_trailer_reg) begin dsp_state <= DSP_READ_TRAILER; wait_for_trailer <= 0; end else begin dsp_state <= DSP_WRITE_TRAILER; new_trailer <= trailer_mask; end end DSP_READ_TRAILER : begin wait_for_trailer <= 1; if(wait_for_trailer) dsp_state <= DSP_WRITE_TRAILER; new_trailer <= access_dat_i[31:0] | trailer_mask; end DSP_WRITE_TRAILER : begin dsp_state <= DSP_WRITE_HEADER; write_adr <= 0; new_header[15:0] <= write_adr + 1; end DSP_WRITE_HEADER : dsp_state <= DSP_DONE; DSP_DONE : begin read_adr <= 0; write_adr <= 0; dsp_state <= DSP_IDLE; end endcase // case (dsp_state) assign access_skip_read = 0; assign access_done = (dsp_state == DSP_DONE); assign access_stb = 1; assign access_we = (dsp_state == DSP_WRITE_HEADER) | (dsp_state == DSP_WRITE_TRAILER) | stb_write; assign access_dat_o = (dsp_state == DSP_WRITE_HEADER) ? { 4'h1, new_header } : (dsp_state == DSP_WRITE_TRAILER) ? { 4'h2, new_trailer } : (last_o&~even_o) ? {4'h0, i8, q8, 16'd0 } : {4'h0, i8_reg, q8_reg, i8, q8 }; assign access_adr = (stb_write|(dsp_state == DSP_WRITE_HEADER)|(dsp_state == DSP_WRITE_TRAILER)) ? write_adr : read_adr; // DSP Pipeline wire [15:0] i16 = access_dat_i[31:16]; wire [15:0] q16 = access_dat_i[15:0]; pipectrl #(.STAGES(2), .TAGWIDTH(2)) pipectrl (.clk(clk), .reset(reset), .src_rdy_i(send_to_pipe), .dst_rdy_o(), // dst_rdy_o will always be 1 since dst_rdy_i is 1, below .src_rdy_o(stb_out), .dst_rdy_i(1), // always accept output of chain .strobes({stb_clip,stb_read}), .valids({val_clip,val_read}), .tag_i({last,even}), .tag_o({last_o,even_o})); always @(posedge clk) if(stb_out & ~even_o) {i8_reg,q8_reg} <= {i8,q8}; clip_reg #(.bits_in(16),.bits_out(8),.STROBED(1)) clip_i (.clk(clk), .in(i16), .out(i8), .strobe_in(stb_clip), .strobe_out()); clip_reg #(.bits_in(16),.bits_out(8),.STROBED(1)) clip_q (.clk(clk), .in(q16), .out(q8), .strobe_in(stb_clip), .strobe_out()); endmodule // dspengine_16to8