// // Copyright 2011-2012 Ettus Research LLC // // This program is free software: you can redistribute it and/or modify // it under the terms of the GNU General Public License as published by // the Free Software Foundation, either version 3 of the License, or // (at your option) any later version. // // This program is distributed in the hope that it will be useful, // but WITHOUT ANY WARRANTY; without even the implied warranty of // MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the // GNU General Public License for more details. // // You should have received a copy of the GNU General Public License // along with this program. If not, see . // ////////////////////////////////////////////////////////////////////////////////// module gpmc #(parameter TXFIFOSIZE = 11, parameter RXFIFOSIZE = 11, parameter ADDR_WIDTH = 10, parameter BUSDEBUG = 1) (// GPMC signals input arst, input EM_CLK, inout [15:0] EM_D, input [ADDR_WIDTH:1] EM_A, input [1:0] EM_NBE, input EM_WAIT0, input EM_NCS4, input EM_NCS6, input EM_NWE, input EM_NOE, // GPIOs for FIFO signalling output rx_have_data, output tx_have_space, output resp_have_data, // FIFO interface input fifo_clk, input fifo_rst, output [35:0] tx_data, output tx_src_rdy, input tx_dst_rdy, input [35:0] rx_data, input rx_src_rdy, output rx_dst_rdy, output [35:0] ctrl_data, output ctrl_src_rdy, input ctrl_dst_rdy, input [35:0] resp_data, input resp_src_rdy, output resp_dst_rdy, output [31:0] debug ); wire EM_output_enable = (~EM_NOE & (~EM_NCS4 | ~EM_NCS6)); wire [15:0] EM_D_data; wire [15:0] EM_D_ctrl; assign EM_D = ~EM_output_enable ? 16'bz : ~EM_NCS4 ? EM_D_data : EM_D_ctrl; // CS4 is RAM_2PORT for DATA PATH (high-speed data) // Writes go into one RAM, reads come from the other // CS6 is for CONTROL PATH (slow) // //////////////////////////////////////////// // TX Data Path wire [17:0] tx18_data; wire tx18_src_rdy, tx18_dst_rdy; wire [35:0] txb_data; wire txb_src_rdy, txb_dst_rdy; gpmc_to_fifo #(.ADDR_WIDTH(10), .LAST_ADDR(10'h3ff), .PTR_WIDTH(2)) gpmc_to_fifo (.EM_D(EM_D), .EM_A(EM_A[10:1]), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS4 & ~EM_NWE), .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), .data_o(tx18_data), .src_rdy_o(tx18_src_rdy), .dst_rdy_i(tx18_dst_rdy), .have_space(tx_have_space)); fifo19_to_fifo36 #(.LE(1)) f19_to_f36 // Little endian because ARM is LE (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .f19_datain({1'b0,tx18_data}), .f19_src_rdy_i(tx18_src_rdy), .f19_dst_rdy_o(tx18_dst_rdy), .f36_dataout(txb_data), .f36_src_rdy_o(txb_src_rdy), .f36_dst_rdy_i(txb_dst_rdy)); fifo_cascade #(.WIDTH(36), .SIZE(TXFIFOSIZE)) tx_buffering( .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .datain(txb_data), .src_rdy_i(txb_src_rdy), .dst_rdy_o(txb_dst_rdy), .dataout(tx_data), .src_rdy_o(tx_src_rdy), .dst_rdy_i(tx_dst_rdy) ); // //////////////////////////////////////////// // RX Data Path wire [17:0] rx18_data; wire rx18_src_rdy, rx18_dst_rdy; wire [35:0] rxb_data; wire rxb_src_rdy, rxb_dst_rdy; wire dummy; fifo_cascade #(.WIDTH(36), .SIZE(RXFIFOSIZE)) rx_buffering( .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .datain(rx_data), .src_rdy_i(rx_src_rdy), .dst_rdy_o(rx_dst_rdy), .dataout(rxb_data), .src_rdy_o(rxb_src_rdy), .dst_rdy_i(rxb_dst_rdy) ); fifo36_to_fifo19 #(.LE(1)) f36_to_f19 // Little endian because ARM is LE (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .f36_datain(rxb_data), .f36_src_rdy_i(rxb_src_rdy), .f36_dst_rdy_o(rxb_dst_rdy), .f19_dataout({dummy,rx18_data}), .f19_src_rdy_o(rx18_src_rdy), .f19_dst_rdy_i(rx18_dst_rdy) ); fifo_to_gpmc #(.ADDR_WIDTH(ADDR_WIDTH), .LAST_ADDR(10'h3ff)) fifo_to_gpmc (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), .data_i(rx18_data), .src_rdy_i(rx18_src_rdy), .dst_rdy_o(rx18_dst_rdy), .EM_D(EM_D_data), .EM_A(EM_A), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS4 & ~EM_NOE), .data_available(rx_have_data)); // //////////////////////////////////////////// // Control path on CS6 // //////////////////////////////////////////////////////////////////// // CTRL TX Data Path wire [17:0] ctrl18_data; wire ctrl18_src_rdy, ctrl18_dst_rdy; wire [35:0] ctrlb_data; wire ctrlb_src_rdy, ctrlb_dst_rdy; gpmc_to_fifo #(.PTR_WIDTH(5), .ADDR_WIDTH(5), .LAST_ADDR(5'h0f)) ctrl_gpmc_to_fifo (.EM_D(EM_D), .EM_A(EM_A[5:1]), .EM_CLK(EM_CLK), .EM_WE(~EM_NCS6 & ~EM_NWE), .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), .data_o(ctrl18_data), .src_rdy_o(ctrl18_src_rdy), .dst_rdy_i(ctrl18_dst_rdy), .have_space(/*always*/)); fifo19_to_fifo36 #(.LE(1)) ctrl_f19_to_f36 // Little endian because ARM is LE (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .f19_datain({1'b0,ctrl18_data}), .f19_src_rdy_i(ctrl18_src_rdy), .f19_dst_rdy_o(ctrl18_dst_rdy), .f36_dataout(ctrlb_data), .f36_src_rdy_o(ctrlb_src_rdy), .f36_dst_rdy_i(ctrlb_dst_rdy)); fifo_cascade #(.WIDTH(36), .SIZE(9)) ctrl_buffering( .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .datain(ctrlb_data), .src_rdy_i(ctrlb_src_rdy), .dst_rdy_o(ctrlb_dst_rdy), .dataout(ctrl_data), .src_rdy_o(ctrl_src_rdy), .dst_rdy_i(ctrl_dst_rdy) ); // //////////////////////////////////////////// // CTRL RX Data Path wire [17:0] resp18_data; wire resp18_src_rdy, resp18_dst_rdy; wire [35:0] respb_data; wire respb_src_rdy, respb_dst_rdy; wire resp_dummy; fifo_cascade #(.WIDTH(36), .SIZE(9)) resp_buffering( .clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .datain(resp_data), .src_rdy_i(resp_src_rdy), .dst_rdy_o(resp_dst_rdy), .dataout(respb_data), .src_rdy_o(respb_src_rdy), .dst_rdy_i(respb_dst_rdy) ); fifo36_to_fifo19 #(.LE(1)) resp_f36_to_f19 // Little endian because ARM is LE (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .f36_datain(respb_data), .f36_src_rdy_i(respb_src_rdy), .f36_dst_rdy_o(respb_dst_rdy), .f19_dataout({resp_dummy,resp18_data}), .f19_src_rdy_o(resp18_src_rdy), .f19_dst_rdy_i(resp18_dst_rdy) ); fifo_to_gpmc #(.PTR_WIDTH(5), .ADDR_WIDTH(5), .LAST_ADDR(5'h0f)) resp_fifo_to_gpmc (.clk(fifo_clk), .reset(fifo_rst), .clear(1'b0), .arst(fifo_rst | arst), .data_i(resp18_data), .src_rdy_i(resp18_src_rdy), .dst_rdy_o(resp18_dst_rdy), .EM_D(EM_D_ctrl), .EM_A(EM_A[5:1]), .EM_CLK(EM_CLK), .EM_OE(~EM_NCS6 & ~EM_NOE), .data_available(resp_have_data)); //* assign debug = { EM_D, //resp18_data[15:0], //16 EM_A, //10 //resp18_data[17:16], resp18_src_rdy, resp18_dst_rdy, //4 EM_NCS4, EM_NCS6, EM_NWE, EM_NOE, //4 EM_CLK, resp_have_data //2 }; //*/ endmodule // gpmc