//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//



// Simple 32-bit Wishbone compatible slave output port
// with 8-bit granularity, modeled after the one in the spec
// Allows for readback
// Assumes a 32-bit wishbone bus
// Lowest order bits get sel[0]
//

module wb_output_pins32
  (wb_rst_i, wb_clk_i, wb_dat_i, wb_dat_o,
   wb_we_i, wb_sel_i, wb_stb_i, wb_ack_o, wb_cyc_i,
   port_output);

   input wb_rst_i;
   input wb_clk_i;
   input wire [31:0] wb_dat_i;
   output wire [31:0] wb_dat_o;
   input  wb_we_i;
   input  wire [3:0] 	 wb_sel_i;
   input  wb_stb_i;
   output wb_ack_o;
   input  wb_cyc_i;

   output wire [31:0] port_output;

   reg [31:0] internal_reg;

   always @(posedge wb_clk_i)
     if(wb_rst_i)
       internal_reg <= #1 32'b0;
     else
       begin
	  if(wb_stb_i & wb_we_i & wb_sel_i[0])
	    internal_reg[7:0] <= #1 wb_dat_i[7:0];
	  if(wb_stb_i & wb_we_i & wb_sel_i[1])
	    internal_reg[15:8] <= #1 wb_dat_i[15:8];
	  if(wb_stb_i & wb_we_i & wb_sel_i[2])
	    internal_reg[23:16] <= #1 wb_dat_i[23:16];
	  if(wb_stb_i & wb_we_i & wb_sel_i[3])
	    internal_reg[31:24] <= #1 wb_dat_i[31:24];
       end // else: !if(wb_rst_i)

   assign wb_dat_o = internal_reg;
   assign port_output = internal_reg;
   assign wb_ack_o = wb_stb_i;
   	     
endmodule // wb_output_pins32