//
// Copyright 2011 Ettus Research LLC
//
// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.
//

// System bootup order:
//    0 - Internal POR to reset this block.  Maybe control it from CPLD in the future?
//    1 - Everything in reset
//    2 - Take RAM Loader out of reset
//    3 - When RAM Loader done, take processor and wishbone out of reset

module system_control 
  (input wb_clk_i,
   output reg ram_loader_rst_o,
   output reg wb_rst_o,
   input ram_loader_done_i
   );

   reg 		POR = 1'b1;
   reg [3:0] 	POR_ctr;

   initial POR_ctr = 4'd0;
   always @(posedge wb_clk_i)
     if(POR_ctr == 4'd15)
       POR <= 1'b0;
     else
       POR_ctr <= POR_ctr + 4'd1;
   
   always @(posedge POR or posedge wb_clk_i)
     if(POR)
       ram_loader_rst_o <= 1'b1;
     else
       ram_loader_rst_o <= #1 1'b0;

   // Main system reset
   reg 		delayed_rst;
   
   always @(posedge POR or posedge wb_clk_i)
     if(POR)
       begin
	  wb_rst_o <= 1'b1;
	  delayed_rst <= 1'b1;
       end
     else if(ram_loader_done_i)
       begin
	  delayed_rst <= 1'b0;
	  wb_rst_o <= delayed_rst;
       end

endmodule // system_control