// Copyright 2014 Ettus Research LLC #ifndef INCLUDED_X300_DEFS_H #define INCLUDED_X300_DEFS_H #define CPU_CLOCK 83333333 #define MAIN_RAM_BASE 0x0000 #define PKT_RAM0_BASE 0x8000 #define SFP0_MAC_BASE 0xC000 #define SFP1_MAC_BASE 0xD000 #define BOOT_LDR_BASE 0xFC00 #define UART0_BASE 0xfd00 #define UART0_BAUD 115200 #define UART1_BASE 0xf900 #define UART1_BAUD 115200 #define I2C0_BASE 0xfe00 #define I2C1_BASE 0xff00 #define I2C2_BASE 0xfc00 #define SET0_BASE 0xa000 #define RB0_BASE 0xa000 //same as set #define SETXB_BASE 0xb000 //eeprom map for mboard addrs #define MBOARD_EEPROM_ADDR 0x50 // Setting Regs Memeory Map static const int SR_LEDS = 0; static const int SR_SW_RST = 1; static const int SR_CLOCK_CTRL = 2; static const int SR_XB_LOCAL = 3; static const int SR_SFPP_CTRL = 4; static const int SR_SPI = 32; static const int SR_ETHINT0 = 40; static const int SR_ETHINT1 = 56; static const int SR_RB_ADDR = 128; //led shifts for SR_LEDS static const int LED_ACT1 = (1 << 5); static const int LED_ACT2 = (1 << 4); static const int LED_LINK1 = (1 << 3); static const int LED_LINK2 = (1 << 2); static const int LED_LINKSTAT = (1 << 1); static const int LED_LINKACT = (1 << 0); // Readback Memory Map static const int RB_COUNTER = 0; static const int RB_SPI_RDY = 1; static const int RB_SPI_DATA = 2; static const int RB_SFP0_TYPE = 4; static const int RB_SFP1_TYPE = 5; static const int RB_FPGA_COMPAT = 6; static const int RB_SFP0_STATUS = 8; static const int RB_SFP1_STATUS = 9; static const int RB_XBAR = 128; // Bootloader Memory Map static const int BL_ADDRESS = 0; static const int BL_DATA = 1; #define SW_RST_PHY 0x01 #define SW_RST_RADIO 0x02 #define SW_RST_RADIO_PLL 0x04 //eth framer constants #define ETH_FRAMER_SRC_MAC_HI 0 #define ETH_FRAMER_SRC_MAC_LO 1 #define ETH_FRAMER_SRC_IP_ADDR 2 #define ETH_FRAMER_SRC_UDP_PORT 3 #define ETH_FRAMER_DST_RAM_ADDR 4 #define ETH_FRAMER_DST_IP_ADDR 5 #define ETH_FRAMER_DST_UDP_MAC 6 #define ETH_FRAMER_DST_MAC_LO 7 // SFP type constants #define RB_SFP_1G_ETH 0 #define RB_SFP_10G_ETH 1 #define RB_SFP_AURORA 2 #endif /* INCLUDED_X300_DEFS_H */