/* -*- c++ -*- */ /* * Copyright 2007 Free Software Foundation, Inc. * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #include "eth_mac.h" #include "memory_map.h" #include #include "eth_phy.h" // for simulation constants #include "mdelay.h" #include "stdio.h" #define PHY_ADDR 1 void eth_mac_set_addr(const eth_mac_addr_t *src) { eth_mac->ucast_hi = (((unsigned int)src->addr[0])<<8) + ((unsigned int)src->addr[1]); eth_mac->ucast_lo = (((unsigned int)src->addr[2])<<24) + (((unsigned int)src->addr[3])<<16) + (((unsigned int)src->addr[4])<<8) + (((unsigned int)src->addr[5])); } void eth_mac_init(const eth_mac_addr_t *src) { eth_mac->miimoder = 25; // divider from CPU clock (50MHz/25 = 2MHz) eth_mac_set_addr(src); eth_mac->settings = MAC_SET_PAUSE_EN | MAC_SET_PASS_BCAST | MAC_SET_PASS_UCAST | MAC_SET_PAUSE_SEND_EN; eth_mac->pause_time = 38; eth_mac->pause_thresh = 1200; // set rx flow control high and low water marks // unsigned int lwmark = (2*2048 + 64)/4; // 2 * 2048-byte frames + 1 * 64-byte pause frame // eth_mac->fc_hwmark = lwmark + 2048/4; // plus a 2048-byte frame // eth_mac->fc_lwmark = 600; // there are currently 2047 lines in the fifo // eth_mac->fc_hwmark = 1200; //eth_mac->fc_padtime = 1700; // how long before flow control runs out do we // request a re-pause. Units of 8ns (bytes) //eth_mac->tx_pause_en = 0; // pay attn to pause frames sent to us //eth_mac->pause_quanta_set = 38; // a bit more than 1 max frame 16kb/512 + fudge //eth_mac->pause_frame_send_en = 0; // enable sending pause frames } int eth_mac_read_rmon(int addr) { int t = 0; /* eth_mac->rmon_rd_addr = addr; eth_mac->rmon_rd_apply = 1; while(eth_mac->rmon_rd_grant == 0) ; t = eth_mac->rmon_rd_dout; eth_mac->rmon_rd_apply = 0; */ return t; } int eth_mac_miim_read(int addr) { int phy_addr = PHY_ADDR; eth_mac->miiaddress = ((addr & 0x1f) << 8) | phy_addr; eth_mac->miicommand = MIIC_RSTAT; while((eth_mac->miistatus & MIIS_BUSY) != 0) ; int r = eth_mac->miirx_data; //printf("MIIM-READ ADDR 0x%x DATA 0x%x\n",addr, r); return r; } void eth_mac_miim_write(int addr, int value) { int phy_addr = PHY_ADDR; eth_mac->miiaddress = ((addr & 0x1f) << 8) | phy_addr; eth_mac->miitx_data = value; eth_mac->miicommand = MIIC_WCTRLDATA; // printf("MIIM-WRITE ADDR 0x%x VAL 0x%x\n",addr,value); while((eth_mac->miistatus & MIIS_BUSY) != 0) ; } int eth_mac_miim_read_status(void) { if (hwconfig_simulation_p()) return 0; return eth_mac->miistatus; }