/* -*- c++ -*- */ /* * Copyright 2004,2007 Free Software Foundation, Inc. * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ #ifndef INCLUDED_USRP2_I2C_ADDR_H #define INCLUDED_USRP2_I2C_ADDR_H // I2C addresses #define I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx #define I2C_ADDR_MBOARD (I2C_DEV_EEPROM | 0x0) #define I2C_ADDR_TX_A (I2C_DEV_EEPROM | 0x4) #define I2C_ADDR_RX_A (I2C_DEV_EEPROM | 0x5) // format of USRP2 motherboard rom // 00: 0x00 h/w rev (LSB) // 01: 0x00 h/w rev (MSB) // 02: 0x00 MAC addr 0 // 03: 0x50 MAC addr 1 // 04: 0xC2 MAC addr 2 // 05: 0x85 MAC addr 3 // 06: 0x3. MAC addr 4 // 07: 0x.. MAC addr 5 #define MBOARD_REV_LSB 0x00 #define MBOARD_REV_MSB 0x01 #define MBOARD_MAC_ADDR 0x02 #define MBOARD_IP_ADDR 0x0C // format of daughterboard EEPROM // 00: 0xDB code for ``I'm a daughterboard'' // 01: .. Daughterboard ID (LSB) // 02: .. Daughterboard ID (MSB) // 03: .. io bits 7-0 direction (bit set if it's an output from m'board) // 04: .. io bits 15-8 direction (bit set if it's an output from m'board) // 05: .. ADC0 DC offset correction (LSB) // 06: .. ADC0 DC offset correction (MSB) // 07: .. ADC1 DC offset correction (LSB) // 08: .. ADC1 DC offset correction (MSB) // ... // 1f: .. negative of the sum of bytes [0x00, 0x1e] #define DB_EEPROM_MAGIC 0x00 #define DB_EEPROM_MAGIC_VALUE 0xDB #define DB_EEPROM_ID_LSB 0x01 #define DB_EEPROM_ID_MSB 0x02 #define DB_EEPROM_OE_LSB 0x03 #define DB_EEPROM_OE_MSB 0x04 #define DB_EEPROM_OFFSET_0_LSB 0x05 // offset correction for ADC or DAC 0 #define DB_EEPROM_OFFSET_0_MSB 0x06 #define DB_EEPROM_OFFSET_1_LSB 0x07 // offset correction for ADC or DAC 1 #define DB_EEPROM_OFFSET_1_MSB 0x08 #define DB_EEPROM_CHKSUM 0x1f #define DB_EEPROM_CLEN 0x20 // length of common portion of eeprom #define DB_EEPROM_CUSTOM_BASE DB_EEPROM_CLEN // first avail offset for // daughterboard specific use #endif /* INCLUDED_USRP2_I2C_ADDR_H */