// This program configures the General Programmable Interface (GPIF) for FX2.     
// Please do not modify sections of text which are marked as "DO NOT EDIT ...". 
//                                                                                
// DO NOT EDIT ...                  
// GPIF Initialization              
// Interface Timing      Async        
// Internal Ready Init   IntRdy=1     
// CTL Out Tristate-able Binary       
// SingleWrite WF Select     1     
// SingleRead WF Select      0     
// FifoWrite WF Select       3     
// FifoRead WF Select        2     
// Data Bus Idle Drive   Tristate     
// END DO NOT EDIT                  
                                    
// DO NOT EDIT ...       
// GPIF Wave Names       
// Wave 0   = singlerd     
// Wave 1   = singlewr     
// Wave 2   = FIFORd       
// Wave 3   = FIFOWr       
                         
// GPIF Ctrl Outputs   Level   
// CTL 0    = WEN#     CMOS        
// CTL 1    = REN#     CMOS        
// CTL 2    = OE#      CMOS        
// CTL 3    = CLRST    CMOS        
// CTL 4    = unused   CMOS        
// CTL 5    = BOGUS    CMOS        
                               
// GPIF Rdy Inputs         
// RDY0     = EF#            
// RDY1     = FF#            
// RDY2     = unused         
// RDY3     = unused         
// RDY4     = unused         
// RDY5     = TCXpire        
// FIFOFlag = FIFOFlag       
// IntReady = IntReady       
// END DO NOT EDIT         
// DO NOT EDIT ...                                                                         
//                                                                                         
// GPIF Waveform 0: singlerd                                                                
//                                                                                         
// Interval     0         1         2         3         4         5         6     Idle (7) 
//          _________ _________ _________ _________ _________ _________ _________ _________
//                                                                                         
// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
// DataMode NO Data   NO Data   NO Data   NO Data   NO Data   NO Data   NO Data            
// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
// IF/Wait  Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
//   Term A                                                                                
//   LFunc                                                                                 
//   Term B                                                                                
// Branch1                                                                                 
// Branch0                                                                                 
// Re-Exec                                                                                 
// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
// WEN#         0         0         0         0         0         0         0         0    
// REN#         0         0         0         0         0         0         0         0    
// OE#          0         0         0         0         0         0         0         0    
// CLRST        0         0         0         0         0         0         0         0    
// unused       0         0         0         0         0         0         0         0    
// BOGUS        0         0         0         0         0         0         0         0    
//                     
// END DO NOT EDIT     
// DO NOT EDIT ...                                                                         
//                                                                                         
// GPIF Waveform 1: singlewr                                                                
//                                                                                         
// Interval     0         1         2         3         4         5         6     Idle (7) 
//          _________ _________ _________ _________ _________ _________ _________ _________
//                                                                                         
// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
// DataMode Activate  Activate  Activate  Activate  Activate  Activate  Activate           
// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
//   Term A           EF#                                                                  
//   LFunc            AND                                                                  
//   Term B           EF#                                                                  
// Branch1            ThenIdle                                                             
// Branch0            ElseIdle                                                             
// Re-Exec            No                                                                   
// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
// WEN#         0         1         1         1         1         1         1         0    
// REN#         0         0         0         0         0         0         0         0    
// OE#          0         0         0         0         0         0         0         0    
// CLRST        0         0         0         0         0         0         0         0    
// unused       0         0         0         0         0         0         0         0    
// BOGUS        0         0         0         0         0         0         0         0    
//                     
// END DO NOT EDIT     
// DO NOT EDIT ...                                                                         
//                                                                                         
// GPIF Waveform 2: FIFORd                                                                  
//                                                                                         
// Interval     0         1         2         3         4         5         6     Idle (7) 
//          _________ _________ _________ _________ _________ _________ _________ _________
//                                                                                         
// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
// DataMode NO Data   Activate  NO Data   NO Data   NO Data   NO Data   NO Data            
// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
// IF/Wait  Wait 1    IF        Wait 1    IF        Wait 1    Wait 1    Wait 1             
//   Term A           TCXpire             TCXpire                                          
//   LFunc            AND                 AND                                              
//   Term B           TCXpire             TCXpire                                          
// Branch1            Then 2              ThenIdle                                         
// Branch0            Else 1              ElseIdle                                         
// Re-Exec            No                  No                                               
// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
// WEN#         0         0         0         0         0         0         0         0    
// REN#         1         0         0         0         0         0         0         0    
// OE#          1         1         1         0         0         0         0         0    
// CLRST        0         0         0         0         0         0         0         0    
// unused       0         0         0         0         0         0         0         0    
// BOGUS        0         0         0         0         0         0         0         0    
//                     
// END DO NOT EDIT     
// DO NOT EDIT ...                                                                         
//                                                                                         
// GPIF Waveform 3: FIFOWr                                                                  
//                                                                                         
// Interval     0         1         2         3         4         5         6     Idle (7) 
//          _________ _________ _________ _________ _________ _________ _________ _________
//                                                                                         
// AddrMode Same Val  Same Val  Same Val  Same Val  Same Val  Same Val  Same Val           
// DataMode NO Data   Activate  Activate  Activate  Activate  Activate  Activate           
// NextData SameData  SameData  SameData  SameData  SameData  SameData  SameData           
// Int Trig No Int    No Int    No Int    No Int    No Int    No Int    No Int             
// IF/Wait  Wait 1    IF        Wait 1    Wait 1    Wait 1    Wait 1    Wait 1             
//   Term A           TCXpire                                                              
//   LFunc            AND                                                                  
//   Term B           TCXpire                                                              
// Branch1            ThenIdle                                                             
// Branch0            Else 1                                                               
// Re-Exec            No                                                                   
// Sngl/CRC Default   Default   Default   Default   Default   Default   Default            
// WEN#         0         0         0         0         0         0         0         0    
// REN#         0         0         0         0         0         0         0         0    
// OE#          0         0         0         0         0         0         0         0    
// CLRST        0         0         0         0         0         0         0         0    
// unused       0         0         0         0         0         0         0         0    
// BOGUS        0         0         0         0         0         0         0         0    
//                     
// END DO NOT EDIT     
                                              
// GPIF Program Code                          
                                              
// DO NOT EDIT ...                            
#include "fx2.h"                            
#include "fx2regs.h"                        
#include "fx2sdly.h"     // SYNCDELAY macro 
// END DO NOT EDIT                            
                                              
// DO NOT EDIT ...                     
const char xdata WaveData[128] =     
{                                      
// Wave 0 
/* LenBr */ 0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
/* Opcode*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
// Wave 1 
/* LenBr */ 0x01,     0x3F,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
/* Opcode*/ 0x22,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
/* Output*/ 0x00,     0x01,     0x01,     0x01,     0x01,     0x01,     0x01,     0x00,
/* LFun  */ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
// Wave 2 
/* LenBr */ 0x01,     0x11,     0x01,     0x3F,     0x01,     0x01,     0x01,     0x07,
/* Opcode*/ 0x00,     0x03,     0x00,     0x01,     0x00,     0x00,     0x00,     0x00,
/* Output*/ 0x06,     0x04,     0x04,     0x00,     0x00,     0x00,     0x00,     0x00,
/* LFun  */ 0x00,     0x2D,     0x00,     0x2D,     0x00,     0x00,     0x00,     0x3F,
// Wave 3 
/* LenBr */ 0x01,     0x39,     0x01,     0x01,     0x01,     0x01,     0x01,     0x07,
/* Opcode*/ 0x00,     0x03,     0x02,     0x02,     0x02,     0x02,     0x02,     0x00,
/* Output*/ 0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,     0x00,
/* LFun  */ 0x00,     0x2D,     0x00,     0x00,     0x00,     0x00,     0x00,     0x3F,
};                     
// END DO NOT EDIT     
                       
// DO NOT EDIT ...                     
const char xdata FlowStates[36] =   
{                                      
/* Wave 0 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/* Wave 1 FlowStates */ 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
/* Wave 2 FlowStates */ 0x81,0x2D,0x26,0x00,0x04,0x04,0x03,0x02,0x00,
/* Wave 3 FlowStates */ 0x81,0x2D,0x21,0x00,0x04,0x04,0x03,0x02,0x00,
};                     
// END DO NOT EDIT     
                       
// DO NOT EDIT ...                                               
const char xdata InitData[7] =                                   
{                                                                
/* Regs  */ 0xA0,0x00,0x00,0x00,0xEE,0x4E,0x00     
};                                                               
// END DO NOT EDIT                                               
                                                                 
// TO DO: You may add additional code below.

void GpifInit( void )
{
  BYTE i;
 
  // Registers which require a synchronization delay, see section 15.14
  // FIFORESET        FIFOPINPOLAR
  // INPKTEND         OUTPKTEND
  // EPxBCH:L         REVCTL
  // GPIFTCB3         GPIFTCB2
  // GPIFTCB1         GPIFTCB0
  // EPxFIFOPFH:L     EPxAUTOINLENH:L
  // EPxFIFOCFG       EPxGPIFFLGSEL
  // PINFLAGSxx       EPxFIFOIRQ
  // EPxFIFOIE        GPIFIRQ
  // GPIFIE           GPIFADRH:L
  // UDMACRCH:L       EPxGPIFTRIG
  // GPIFTRIG
  
  // Note: The pre-REVE EPxGPIFTCH/L register are affected, as well...
  //      ...these have been replaced by GPIFTC[B3:B0] registers
 
  // 8051 doesn't have access to waveform memories 'til
  // the part is in GPIF mode.
 
  IFCONFIG = 0xEE;
  // IFCLKSRC=1   , FIFOs executes on internal clk source
  // xMHz=1       , 48MHz internal clk rate
  // IFCLKOE=0    , Don't drive IFCLK pin signal at 48MHz
  // IFCLKPOL=0   , Don't invert IFCLK pin signal from internal clk
  // ASYNC=1      , master samples asynchronous
  // GSTATE=1     , Drive GPIF states out on PORTE[2:0], debug WF
  // IFCFG[1:0]=10, FX2 in GPIF master mode
 
  GPIFABORT = 0xFF;  // abort any waveforms pending
 
  GPIFREADYCFG = InitData[ 0 ];
  GPIFCTLCFG = InitData[ 1 ];
  GPIFIDLECS = InitData[ 2 ];
  GPIFIDLECTL = InitData[ 3 ];
  GPIFWFSELECT = InitData[ 5 ];
  GPIFREADYSTAT = InitData[ 6 ];
 
  // use dual autopointer feature... 
  AUTOPTRSETUP = 0x07;          // inc both pointers, 
                                // ...warning: this introduces pdata hole(s)
                                // ...at E67B (XAUTODAT1) and E67C (XAUTODAT2)
  
  // source
  AUTOPTRH1 = MSB( &WaveData );
  AUTOPTRL1 = LSB( &WaveData );
  
  // destination
  AUTOPTRH2 = 0xE4;
  AUTOPTRL2 = 0x00;
 
  // transfer
  for ( i = 0x00; i < 128; i++ )
  {
    EXTAUTODAT2 = EXTAUTODAT1;
  }
 
// Configure GPIF Address pins, output initial value,
  PORTCCFG = 0xFF;    // [7:0] as alt. func. GPIFADR[7:0]
  OEC = 0xFF;         // and as outputs
  PORTECFG |= 0x80;   // [8] as alt. func. GPIFADR[8]
  OEE |= 0x80;        // and as output
 
// ...OR... tri-state GPIFADR[8:0] pins
//  PORTCCFG = 0x00;  // [7:0] as port I/O
//  OEC = 0x00;       // and as inputs
//  PORTECFG &= 0x7F; // [8] as port I/O
//  OEE &= 0x7F;      // and as input
 
// GPIF address pins update when GPIFADRH/L written
  SYNCDELAY;                    // 
  GPIFADRH = 0x00;    // bits[7:1] always 0
  SYNCDELAY;                    // 
  GPIFADRL = 0x00;    // point to PERIPHERAL address 0x0000
 
// Configure GPIF FlowStates registers for Wave 0 of WaveData
  FLOWSTATE = FlowStates[ 0 ];
  FLOWLOGIC = FlowStates[ 1 ];
  FLOWEQ0CTL = FlowStates[ 2 ];
  FLOWEQ1CTL = FlowStates[ 3 ];
  FLOWHOLDOFF = FlowStates[ 4 ];
  FLOWSTB = FlowStates[ 5 ];
  FLOWSTBEDGE = FlowStates[ 6 ];
  FLOWSTBHPERIOD = FlowStates[ 7 ];
}