/* 
 * USRP - Universal Software Radio Peripheral
 *
 * Copyright (C) 2003,2004 Free Software Foundation, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
 */

#include "usrp_common.h"
#include "usrp_commands.h"
#include "fpga.h"
#include "usrp_gpif_inline.h"
#include "timer.h"
#include "i2c.h"
#include "isr.h"
#include "usb_common.h"
#include "fx2utils.h"
#include "usrp_globals.h"
#include "usrp_i2c_addr.h"
#include <string.h>
#include "eeprom_io.h"
#include "usb_descriptors.h"

/*
 * offsets into boot eeprom for configuration values
 */
#define	HW_REV_OFFSET		  5
#define SERIAL_NO_OFFSET	247
#define SERIAL_NO_LEN		  9


#define	bRequestType	SETUPDAT[0]
#define	bRequest	SETUPDAT[1]
#define	wValueL		SETUPDAT[2]
#define	wValueH		SETUPDAT[3]
#define	wIndexL		SETUPDAT[4]
#define	wIndexH		SETUPDAT[5]
#define	wLengthL	SETUPDAT[6]
#define	wLengthH	SETUPDAT[7]


unsigned char g_tx_enable = 0;
unsigned char g_rx_enable = 0;
unsigned char g_rx_overrun = 0;
unsigned char g_tx_underrun = 0;
bit enable_gpif = 0;

/*
 * the host side fpga loader code pushes an MD5 hash of the bitstream
 * into hash1.
 */
#define	  USRP_HASH_SIZE      16
xdata at USRP_HASH_SLOT_1_ADDR unsigned char hash1[USRP_HASH_SIZE];

void clear_fpga_data_fifo(void);

static void
get_ep0_data (void)
{
  EP0BCL = 0;			// arm EP0 for OUT xfer.  This sets the busy bit

  while (EP0CS & bmEPBUSY)	// wait for busy to clear
    ;
}

static void initialize_gpif_buffer(int ep) {
  //clear the GPIF buffers on startup to keep crap out of the data path
  FIFORESET = 0x80; SYNCDELAY; //activate NAKALL
  FIFORESET = ep; SYNCDELAY;
  FIFORESET = 0x00; SYNCDELAY;
}

/*
 * Handle our "Vendor Extension" commands on endpoint 0.
 * If we handle this one, return non-zero.
 */
unsigned char
app_vendor_cmd (void)
{
  if (bRequestType == VRT_VENDOR_IN){

    /////////////////////////////////
    //    handle the IN requests
    /////////////////////////////////

    switch (bRequest){

    case VRQ_GET_STATUS: //this is no longer done via FX2 -- the FPGA will be queried instead
      return 0;
      break;

    case VRQ_I2C_READ:
      if (!i2c_read (wValueL, EP0BUF, wLengthL)) return 0;
        EP0BCH = 0;
        EP0BCL = wLengthL;
        break;
      
    case VRQ_SPI_READ:
      return 0;

    case VRQ_FW_COMPAT:
        EP0BCH = 0;
        EP0BCL = 2;
        break;

    default:
      return 0;
    }
  }

  else if (bRequestType == VRT_VENDOR_OUT){

    /////////////////////////////////
    //    handle the OUT requests
    /////////////////////////////////

    switch (bRequest){

    case VRQ_SET_LED:
      switch (wIndexL){
      case 0:
        set_led_0 (wValueL);
        break;
	
      case 1:
        set_led_1 (wValueL);
        break;
	
      default:
        return 0;
      }
      break;
      
    case VRQ_FPGA_LOAD:
      switch (wIndexL){			// sub-command
      case FL_BEGIN:
        return fpga_load_begin ();
	
      case FL_XFER:
        get_ep0_data ();
        return fpga_load_xfer (EP0BUF, EP0BCL);
	
      case FL_END:
        return fpga_load_end ();
	
      default:
        return 0;
      }
      break;

    case VRQ_FPGA_SET_RESET:
      //fpga_set_reset (wValueL);
      break;

    case VRQ_I2C_WRITE:
      get_ep0_data ();
      if (!i2c_write (wValueL, EP0BUF, EP0BCL)) return 0;
      //USRP_LED_REG ^= bmLED1;
      break;
      
    case VRQ_RESET_GPIF:
      initialize_gpif_buffer(wValueL);
      break;
      
    case VRQ_ENABLE_GPIF:
      enable_gpif = (wValueL != 0) ? 1 : 0;
      set_led_1(enable_gpif);
      break;
    
    case VRQ_CLEAR_FPGA_FIFO:
        clear_fpga_data_fifo();
        break;

    default:
      return 0;
    }

  }
  else
    return 0;    // invalid bRequestType

  return 1;
}

static int short_pkt_state = 0;
#define SHORT_PACKET_DETECTED (short_pkt_state != bitSHORT_PACKET_SIGNAL)

//yes, this is a little opaque
//basically this is necessary because while all the logic to inform the FPGA
//of what we're trying to do via the CTL pins is contained within the flowstates,
//we need to assert the endpoint select pin one clock cycle before the flowstate starts.
//this is the job of the wave descriptor. rather than switch between waves, since that
//involves a little more setup, we just modify the wave table on the fly.
inline static void setup_wave_data_read(void) {
    GPIF_WAVE_DATA[80] = 0x06;
    GPIF_WAVE_DATA[81] = 0x06;
}

inline static void setup_wave_ctrl_read(void) {
    GPIF_WAVE_DATA[80] = 0x0E;
    GPIF_WAVE_DATA[81] = 0x0E;
}

inline static void setup_wave_data_write(void) {
    GPIF_WAVE_DATA[112] = 0x00;
    GPIF_WAVE_DATA[113] = 0x00;
}

inline static void setup_wave_ctrl_write(void) {
    GPIF_WAVE_DATA[112] = 0x08;
    GPIF_WAVE_DATA[113] = 0x08;
}

inline static void handle_data_write(void) {
    GPIFTCB1 = 0x01;	//SYNCDELAY;
    GPIFTCB0 = 0x00;
    setup_flowstate_data_write ();
    setup_wave_data_write();
    GPIFTRIG = bmGPIF_EP2_START | bmGPIF_WRITE; 	// start the xfer
    SYNCDELAY;
    while (!(GPIFTRIG & bmGPIF_IDLE));
}

inline static void handle_ctrl_write(void) {
    GPIFTCB1 = 0x00;
    GPIFTCB0 = 0x10;
    setup_flowstate_ctrl_write ();
    setup_wave_ctrl_write();
    GPIFTRIG = bmGPIF_EP4_START | bmGPIF_WRITE; 	// start the xfer
    SYNCDELAY;
    while (!(GPIFTRIG & bmGPIF_IDLE));
}

inline static void handle_data_read(void) {
    GPIFTCB1 = 0x01;
    GPIFTCB0 = 0x00;
    setup_flowstate_data_read ();
    setup_wave_data_read();
    short_pkt_state = bitSHORT_PACKET_SIGNAL;
    GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
    SYNCDELAY;
    while (!(GPIFTRIG & bmGPIF_IDLE));
    INPKTEND = 0x06;	// tell USB we filled buffer (6 is our endpoint num)
    SYNCDELAY;
    if(SHORT_PACKET_DETECTED) {
        while(!(EP6CS & bmEPEMPTY)); //wait for packet to send
        INPKTEND = 0x06; //send a ZLP
        //toggle_led_1(); //FIXME DEBUG
    }
}

inline static void handle_ctrl_read(void) {
    GPIFTCB1 = 0x00;
    GPIFTCB0 = 0x10;
    setup_flowstate_ctrl_read ();
    setup_wave_ctrl_read();
    GPIFTRIG = bmGPIF_EP8_START | bmGPIF_READ; 	// start the xfer
    SYNCDELAY;
    while (!(GPIFTRIG & bmGPIF_IDLE));
    INPKTEND = 8;	// tell USB we filled buffer (8 is our endpoint num)
}

//clear the FPGA datapath by reading but not submitting, instead clearing the FIFO after each transaction
void clear_fpga_data_fifo(void) {
    while(fpga_has_data_packet_avail()) {
        GPIFTCB1 = 0x01;
        GPIFTCB0 = 0x00;
        setup_flowstate_data_read ();
        setup_wave_data_read();
        GPIFTRIG = bmGPIF_EP6_START | bmGPIF_READ; 	// start the xfer
        SYNCDELAY;
        while (!(GPIFTRIG & bmGPIF_IDLE));
        initialize_gpif_buffer(6); //reset the FIFO instead of committing it
    }
}

static void
main_loop (void)
{
  while (1){
    if (usb_setup_packet_avail ())
      usb_handle_setup_packet ();

    if(enable_gpif){
        if  (fx2_has_ctrl_packet_avail()    && fpga_has_room_for_ctrl_packet()) handle_ctrl_write();
        if  (fx2_has_room_for_ctrl_packet() && fpga_has_ctrl_packet_avail())    handle_ctrl_read();
        
        //we do this
        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
        //five times so that
        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
        //we can piggyback
        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
        //data transfers
        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
        //without loop overhead
        if  (fx2_has_data_packet_avail()    && fpga_has_room_for_data_packet()) handle_data_write();
        if  (fx2_has_room_for_data_packet() && fpga_has_data_packet_avail())    handle_data_read();
    }
  }
}

/*
 * called at 100 Hz from timer2 interrupt
 *
 * Toggle led 0
 */
void
isr_tick (void) interrupt
{
  static unsigned char	count = 1;
  
  if (--count == 0){
    count = 50;
    USRP_LED_REG ^= bmLED0;
  }

  clear_timer_irq ();
}

/*
 * Read h/w rev code and serial number out of boot eeprom and
 * patch the usb descriptors with the values.
 */
void
patch_usb_descriptors(void)
{
  static xdata unsigned char hw_rev;
  static xdata unsigned char serial_no[SERIAL_NO_LEN];
  unsigned char i;

  eeprom_read(I2C_ADDR_BOOT, HW_REV_OFFSET, &hw_rev, 1);	// LSB of device id
  usb_desc_hw_rev_binary_patch_location_0[0] = hw_rev;
  usb_desc_hw_rev_binary_patch_location_1[0] = hw_rev;
  usb_desc_hw_rev_ascii_patch_location_0[0] = hw_rev + '0';     // FIXME if we get > 9

  eeprom_read(I2C_ADDR_BOOT, SERIAL_NO_OFFSET, serial_no, SERIAL_NO_LEN);

  for (i = 0; i < SERIAL_NO_LEN; i++){
    unsigned char ch = serial_no[i];
    if (ch == 0xff)	// make unprogrammed EEPROM default to '0'
      ch = '0';
    usb_desc_serial_number_ascii[i << 1] = ch;
  }
}

void
main (void)
{
  enable_gpif = 0;

  memset (hash1, 0, USRP_HASH_SIZE);	// zero fpga bitstream hash.  This forces reload
  
  init_usrp ();
  init_gpif ();
  
  // if (UC_START_WITH_GSTATE_OUTPUT_ENABLED)
  //IFCONFIG |= bmGSTATE;			// no conflict, start with it on

  set_led_0 (0);
  set_led_1 (0);
  
  EA = 0;		// disable all interrupts

  patch_usb_descriptors();

  setup_autovectors ();
  usb_install_handlers ();
  //hook_timer_tick ((unsigned short) isr_tick);

  EIEX4 = 1;		// disable INT4 FIXME
  EA = 1;		// global interrupt enable

  fx2_renumerate ();	// simulates disconnect / reconnect

  setup_flowstate_common();
  main_loop ();
}