// Read from register 24 to confirm that Rx CRC check is enabled
03 00 18 00 01 ff ff

// Set speed to 1000 Mbps
01 00 22 00 04

// Set MDIO clock (MDC) divider to 4 to speed up test
01 00 23 00 04
03 00 23 00 04 ff ff

// Check default (reset) values in new (added) MDIO registers
//03 00 23 00 64 ff ff
03 00 24 00 00 ff ff
03 00 25 00 00 ff ff
03 00 26 00 00 ff ff
03 00 27 00 00 ff ff
03 00 28 00 00 ff ff

// Set RGAD=0x00 (all zeroes), FIAD=0x1f (all ones), check it
// - these values allows easy recognition in the waveform
01 00 25 00 1f
03 00 25 00 1f ff ff

// Now start the read operation by writing a 1 to the MIICOMMAND[1] - RSTAT
01 00 24 00 02
03 00 24 00 02 ff ff

// Delay for 768 NOP
0F 03 00

// Check that the read operation has completed
03 00 28 00 00 ff ff

// Set RGAD=0x1f (all ones), FIAD=0x00 (all zeroes), check it
// - these values allows easy recognition in the waveform
01 00 25 1f 00
03 00 25 1f 00 ff ff
// Set MIITX_DATA = 0xAAAA, check it
01 00 26 AA AA
03 00 26 AA AA ff ff
// Check MIISTATUS - must still be zero
03 00 28 00 00 ff ff

// Now start the write operation by writing a 1 to the MIICOMMAND[2] - WCTRLDATA
01 00 24 00 04
03 00 24 00 04 ff ff

// Delay for 768 NOP
0F 03 00

// Check that the write operation has completed
03 00 28 00 00 ff ff