From 7e6a08556b01fcb6ad113c2ff0db4abe5aeac38f Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Wed, 1 Feb 2012 18:02:10 -0800 Subject: dsp rework: custom engine module for rx/tx vita chain --- usrp2/custom/custom_engine_tx.v | 104 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 104 insertions(+) create mode 100644 usrp2/custom/custom_engine_tx.v (limited to 'usrp2/custom/custom_engine_tx.v') diff --git a/usrp2/custom/custom_engine_tx.v b/usrp2/custom/custom_engine_tx.v new file mode 100644 index 000000000..6227b0f45 --- /dev/null +++ b/usrp2/custom/custom_engine_tx.v @@ -0,0 +1,104 @@ +// +// Copyright 2012 Ettus Research LLC +// +// This program is free software: you can redistribute it and/or modify +// it under the terms of the GNU General Public License as published by +// the Free Software Foundation, either version 3 of the License, or +// (at your option) any later version. +// +// This program is distributed in the hope that it will be useful, +// but WITHOUT ANY WARRANTY; without even the implied warranty of +// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +// GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License +// along with this program. If not, see . +// + +//CUSTOMIZE ME! + +//The following module is used to re-write transmit packets from the host. +//This module provides a packet-based ram interface for manipulating packets. +//The user writes a custom engine (state machine) to read the input packet, +//and to produce a new output packet. For users customizing the DSP operation, +//your customizations may be better suited for the custom_dsp_tx module. +//By default, this module uses the built-in 8 to 16 bit converter engine. + +module custom_engine_tx +#( + //the dsp unit number: 0, 1, 2... + parameter DSPNO = 0, + + //buffer size for ram interface engine + parameter BUF_SIZE = 10, + + //base address for built-in settings registers used in this module + parameter MAIN_SETTINGS_BASE = 0, + + //the number of 32bit lines between start of buffer and vita header + //the metadata before the header should be preserved by the engine + parameter HEADER_OFFSET = 0 +) +( + //control signals + input clock, input reset, input clear, + + //main settings bus for built-in modules + input set_stb_main, input [7:0] set_addr_main, input [31:0] set_data_main, + + //user settings bus, controlled through user setting regs API + input set_stb_user, input [7:0] set_addr_user, input [31:0] set_data_user, + + //ram interface for engine + output access_we, + output access_stb, + input access_ok, + output access_done, + output access_skip_read, + output [BUF_SIZE-1:0] access_adr, + input [BUF_SIZE-1:0] access_len, + output [35:0] access_dat_o, + input [35:0] access_dat_i, + + //debug output (optional) + output [31:0] debug +); + + generate + if (DSPNO==0) begin + `ifndef TX_ENG0_MODULE + dspengine_8to16 #(.BASE(MAIN_SETTINGS_BASE), .BUF_SIZE(BUF_SIZE), .HEADER_OFFSET(HEADER_OFFSET)) dspengine_8to16 + (.clk(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_main), .set_addr(set_addr_main), .set_data(set_data_main), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `else + TX_ENG0_MODULE #(.BUF_SIZE(BUF_SIZE)) tx_eng0_custom + (.clock(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `endif + end + else begin + `ifndef TX_ENG1_MODULE + dspengine_8to16 #(.BASE(MAIN_SETTINGS_BASE), .BUF_SIZE(BUF_SIZE), .HEADER_OFFSET(HEADER_OFFSET)) dspengine_8to16 + (.clk(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_main), .set_addr(set_addr_main), .set_data(set_data_main), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `else + TX_ENG1_MODULE #(.BUF_SIZE(BUF_SIZE)) tx_eng1_custom + (.clock(clock),.reset(reset),.clear(clear), + .set_stb(set_stb_user), .set_addr(set_addr_user), .set_data(set_data_user), + .access_we(access_we), .access_stb(access_stb), .access_ok(access_ok), .access_done(access_done), + .access_skip_read(access_skip_read), .access_adr(access_adr), .access_len(access_len), + .access_dat_i(access_dat_i), .access_dat_o(access_dat_o)); + `endif + end + endgenerate + +endmodule //custom_engine_tx -- cgit v1.2.3