From 35b4a76effc67696aeadaf870ce446e3530a9151 Mon Sep 17 00:00:00 2001
From: Matt Ettus <matt@ettus.com>
Date: Wed, 26 Oct 2011 15:33:20 -0700
Subject: u2/u2p: use new setting_reg based gpios, gets it off of wb

---
 usrp2/control_lib/gpio_atr.v | 71 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 usrp2/control_lib/gpio_atr.v

(limited to 'usrp2/control_lib')

diff --git a/usrp2/control_lib/gpio_atr.v b/usrp2/control_lib/gpio_atr.v
new file mode 100644
index 000000000..82d72b815
--- /dev/null
+++ b/usrp2/control_lib/gpio_atr.v
@@ -0,0 +1,71 @@
+
+//
+// Copyright 2011 Ettus Research LLC
+//
+// This program is free software: you can redistribute it and/or modify
+// it under the terms of the GNU General Public License as published by
+// the Free Software Foundation, either version 3 of the License, or
+// (at your option) any later version.
+//
+// This program is distributed in the hope that it will be useful,
+// but WITHOUT ANY WARRANTY; without even the implied warranty of
+// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+// GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License
+// along with this program.  If not, see <http://www.gnu.org/licenses/>.
+//
+
+
+module gpio_atr
+  #(parameter BASE = 0,
+    parameter WIDTH = 32)
+   (input clk, input reset,
+    input set_stb, input [7:0] set_addr, input [31:0] set_data,
+    input rx, input tx,
+    inout [WIDTH-1:0] gpio,
+    output reg [31:0] gpio_readback
+    );
+   
+   wire [WIDTH-1:0]   ddr, in_idle, in_tx, in_rx, in_fdx;
+   reg [WIDTH-1:0]    rgpio, igpio;
+   
+   setting_reg #(.my_addr(BASE+0), .width(WIDTH)) reg_idle
+     (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),
+      .out(in_idle),.changed());
+
+   setting_reg #(.my_addr(BASE+1), .width(WIDTH)) reg_rx
+     (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),
+      .out(in_rx),.changed());
+
+   setting_reg #(.my_addr(BASE+2), .width(WIDTH)) reg_tx
+     (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),
+      .out(in_tx),.changed());
+
+   setting_reg #(.my_addr(BASE+3), .width(WIDTH)) reg_fdx
+     (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),
+      .out(in_fdx),.changed());
+
+   setting_reg #(.my_addr(BASE+4), .width(WIDTH)) reg_ddr
+     (.clk(clk),.rst(reset),.strobe(set_stb),.addr(set_addr), .in(set_data),
+      .out(ddr),.changed());
+
+   always @(posedge clk)
+     case({tx,rx})
+       2'b00: rgpio <= in_idle;
+       2'b01: rgpio <= in_rx;
+       2'b10: rgpio <= in_tx;
+       2'b11: rgpio <= in_fdx;
+     endcase // case ({tx,rx})
+   
+   integer 	      n;
+   always @*
+     for(n=0;n<WIDTH;n=n+1)
+       igpio[n] <= ddr[n] ? rgpio[n] : 1'bz;
+
+   assign     gpio = igpio;
+
+   always @(posedge clk)
+     gpio_readback <= gpio;
+   
+endmodule // gpio_atr
-- 
cgit v1.2.3