From 24b07e1b0dbe8ab9d72c46f65c14c34e84347554 Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Wed, 14 Sep 2011 21:54:08 -0400 Subject: usrp1: copy regs files into common and fix include paths --- usrp1/common/fpga_regs_common.v | 117 +++++++++++++++++ usrp1/common/fpga_regs_standard.v | 256 ++++++++++++++++++++++++++++++++++++++ 2 files changed, 373 insertions(+) create mode 100644 usrp1/common/fpga_regs_common.v create mode 100644 usrp1/common/fpga_regs_standard.v (limited to 'usrp1/common') diff --git a/usrp1/common/fpga_regs_common.v b/usrp1/common/fpga_regs_common.v new file mode 100644 index 000000000..8035d8565 --- /dev/null +++ b/usrp1/common/fpga_regs_common.v @@ -0,0 +1,117 @@ +// +// This file is machine generated from ./fpga_regs_common.h +// Do not edit by hand; your edits will be overwritten. +// + +// This file defines registers common to all FPGA configurations. +// Registers 0 to 31 are reserved for use in this file. + + +// The FPGA needs to know the rate that samples are coming from and +// going to the A/D's and D/A's. div = 128e6 / sample_rate + +`define FR_TX_SAMPLE_RATE_DIV 7'd0 +`define FR_RX_SAMPLE_RATE_DIV 7'd1 + +// 2 and 3 are defined in the ATR section + +`define FR_MASTER_CTRL 7'd4 // master enable and reset controls + +// i/o direction registers for pins that go to daughterboards. +// Setting the bit makes it an output from the FPGA to the d'board. +// top 16 is mask, low 16 is value + +`define FR_OE_0 7'd5 // slot 0 +`define FR_OE_1 7'd6 +`define FR_OE_2 7'd7 +`define FR_OE_3 7'd8 + +// i/o registers for pins that go to daughterboards. +// top 16 is a mask, low 16 is value + +`define FR_IO_0 7'd9 // slot 0 +`define FR_IO_1 7'd10 +`define FR_IO_2 7'd11 +`define FR_IO_3 7'd12 + +`define FR_MODE 7'd13 + + +// If the corresponding bit is set, internal FPGA debug circuitry +// controls the i/o pins for the associated bank of daughterboard +// i/o pins. Typically used for debugging FPGA designs. + +`define FR_DEBUG_EN 7'd14 + + +// If the corresponding bit is set, enable the automatic DC +// offset correction control loop. +// +// The 4 low bits are significant: +// +// ADC0 = (1 << 0) +// ADC1 = (1 << 1) +// ADC2 = (1 << 2) +// ADC3 = (1 << 3) +// +// This control loop works if the attached daugherboard blocks DC. +// Currently all daughterboards do block DC. This includes: +// basic rx, dbs_rx, tv_rx, flex_xxx_rx. + +`define FR_DC_OFFSET_CL_EN 7'd15 // DC Offset Control Loop Enable + + +// offset corrections for ADC's and DAC's (2's complement) + +`define FR_ADC_OFFSET_0 7'd16 +`define FR_ADC_OFFSET_1 7'd17 +`define FR_ADC_OFFSET_2 7'd18 +`define FR_ADC_OFFSET_3 7'd19 + + +// ------------------------------------------------------------------------ +// Automatic Transmit/Receive switching +// +// If automatic transmit/receive (ATR) switching is enabled in the +// FR_ATR_CTL register, the presence or absence of data in the FPGA +// transmit fifo selects between two sets of values for each of the 4 +// banks of daughterboard i/o pins. +// +// Each daughterboard slot has 3 16-bit registers associated with it: +// FR_ATR_MASK_*, FR_ATR_TXVAL_* and FR_ATR_RXVAL_* +// +// FR_ATR_MASK_{0,1,2,3}: +// +// These registers determine which of the daugherboard i/o pins are +// affected by ATR switching. If a bit in the mask is set, the +// corresponding i/o bit is controlled by ATR, else it's output +// value comes from the normal i/o pin output register: +// FR_IO_{0,1,2,3}. +// +// FR_ATR_TXVAL_{0,1,2,3}: +// FR_ATR_RXVAL_{0,1,2,3}: +// +// If the Tx fifo contains data, then the bits from TXVAL that are +// selected by MASK are output. Otherwise, the bits from RXVAL that +// are selected by MASK are output. + +`define FR_ATR_MASK_0 7'd20 // slot 0 +`define FR_ATR_TXVAL_0 7'd21 +`define FR_ATR_RXVAL_0 7'd22 + +`define FR_ATR_MASK_1 7'd23 // slot 1 +`define FR_ATR_TXVAL_1 7'd24 +`define FR_ATR_RXVAL_1 7'd25 + +`define FR_ATR_MASK_2 7'd26 // slot 2 +`define FR_ATR_TXVAL_2 7'd27 +`define FR_ATR_RXVAL_2 7'd28 + +`define FR_ATR_MASK_3 7'd29 // slot 3 +`define FR_ATR_TXVAL_3 7'd30 +`define FR_ATR_RXVAL_3 7'd31 + +// Clock ticks to delay rising and falling edge of T/R signal +`define FR_ATR_TX_DELAY 7'd2 +`define FR_ATR_RX_DELAY 7'd3 + diff --git a/usrp1/common/fpga_regs_standard.v b/usrp1/common/fpga_regs_standard.v new file mode 100644 index 000000000..d09aa6116 --- /dev/null +++ b/usrp1/common/fpga_regs_standard.v @@ -0,0 +1,256 @@ +// +// This file is machine generated from ./fpga_regs_standard.h +// Do not edit by hand; your edits will be overwritten. +// + +// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h. +// Registers 64 to 79 are available for custom FPGA builds. + + +// DDC / DUC + +`define FR_INTERP_RATE 7'd32 // [1,1024] +`define FR_DECIM_RATE 7'd33 // [1,256] + +// DDC center freq + +`define FR_RX_FREQ_0 7'd34 +`define FR_RX_FREQ_1 7'd35 +`define FR_RX_FREQ_2 7'd36 +`define FR_RX_FREQ_3 7'd37 + +// See below for DDC Starting Phase + +// ------------------------------------------------------------------------ +// configure FPGA Rx mux +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------+-------+-------+-------+-------+-+-----+ +// | must be zero | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH | +// +-----------------------+-------+-------+-------+-------+-+-----+ +// +// There are a maximum of 4 digital downconverters in the the FPGA. +// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q. +// +// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0 +// +// 0 = DDC input is from ADC 0 +// 1 = DDC input is from ADC 1 +// 2 = DDC input is from ADC 2 +// 3 = DDC input is from ADC 3 +// +// If Z == 1, all DDC Q inputs are set to zero +// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0 +// +// NCH specifies the number of complex channels that are sent across +// the USB. The legal values are 1, 2 or 4, corresponding to 2, 4 or +// 8 16-bit values. + +`define FR_RX_MUX 7'd38 + +// ------------------------------------------------------------------------ +// configure FPGA Tx Mux. +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------+-------+-------+-------+-------+-+-----+ +// | | DAC3 | DAC2 | DAC1 | DAC0 |0| NCH | +// +-----------------------------------------------+-------+-+-----+ +// +// NCH specifies the number of complex channels that are sent across +// the USB. The legal values are 1 or 2, corresponding to 2 or 4 +// 16-bit values. +// +// There are two interpolators with complex inputs and outputs. +// There are four DACs. (We use the DUC in each AD9862.) +// +// Each 4-bit DACx field specifies the source for the DAC and +// whether or not that DAC is enabled. Each subfield is coded +// like this: +// +// 3 2 1 0 +// +-+-----+ +// |E| N | +// +-+-----+ +// +// Where E is set if the DAC is enabled, and N specifies which +// interpolator output is connected to this DAC. +// +// N which interp output +// --- ------------------- +// 0 chan 0 I +// 1 chan 0 Q +// 2 chan 1 I +// 3 chan 1 Q + +`define FR_TX_MUX 7'd39 + +// ------------------------------------------------------------------------ +// REFCLK control +// +// Control whether a reference clock is sent to the daughterboards, +// and what frequency. The refclk is sent on d'board i/o pin 0. +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------------------------------+-+------------+ +// | Reserved (Must be zero) |E| DIVISOR | +// +-----------------------------------------------+-+------------+ + +// +// Bit 7 -- 1 turns on refclk, 0 allows IO use +// Bits 6:0 Divider value + +`define FR_TX_A_REFCLK 7'd40 +`define FR_RX_A_REFCLK 7'd41 +`define FR_TX_B_REFCLK 7'd42 +`define FR_RX_B_REFCLK 7'd43 + + +// ------------------------------------------------------------------------ +// DDC Starting Phase + +`define FR_RX_PHASE_0 7'd44 +`define FR_RX_PHASE_1 7'd45 +`define FR_RX_PHASE_2 7'd46 +`define FR_RX_PHASE_3 7'd47 + +// ------------------------------------------------------------------------ +// Tx data format control register +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-------------------------------------------------------+-------+ +// | Reserved (Must be zero) | FMT | +// +-------------------------------------------------------+-------+ +// +// FMT values: + +`define FR_TX_FORMAT 7'd48 + +// ------------------------------------------------------------------------ +// Rx data format control register +// +// 3 2 1 +// 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 +// +-----------------------------------------+-+-+---------+-------+ +// | Reserved (Must be zero) |B|Q| WIDTH | SHIFT | +// +-----------------------------------------+-+-+---------+-------+ +// +// FMT values: + +`define FR_RX_FORMAT 7'd49 + + +// The valid combinations currently are: +// +// B Q WIDTH SHIFT +// 0 1 16 0 +// 0 1 8 8 + + +// Possible future values of WIDTH = {4, 2, 1} +// 12 takes a bit more work, since we need to know packet alignment. + +// ------------------------------------------------------------------------ +// FIXME register numbers 50 to 63 are available + +// ------------------------------------------------------------------------ +// Registers 64 to 95 are reserved for user custom FPGA builds. +// The standard USRP software will not touch these. + +`define FR_USER_0 7'd64 +`define FR_USER_1 7'd65 +`define FR_USER_2 7'd66 +`define FR_USER_3 7'd67 +`define FR_USER_4 7'd68 +`define FR_USER_5 7'd69 +`define FR_USER_6 7'd70 +`define FR_USER_7 7'd71 +`define FR_USER_8 7'd72 +`define FR_USER_9 7'd73 +`define FR_USER_10 7'd74 +`define FR_USER_11 7'd75 +`define FR_USER_12 7'd76 +`define FR_USER_13 7'd77 +`define FR_USER_14 7'd78 +`define FR_USER_15 7'd79 +`define FR_USER_16 7'd80 +`define FR_USER_17 7'd81 +`define FR_USER_18 7'd82 +`define FR_USER_19 7'd83 +`define FR_USER_20 7'd84 +`define FR_USER_21 7'd85 +`define FR_USER_22 7'd86 +`define FR_USER_23 7'd87 +`define FR_USER_24 7'd88 +`define FR_USER_25 7'd89 +`define FR_USER_26 7'd90 +`define FR_USER_27 7'd91 +`define FR_USER_28 7'd92 +`define FR_USER_29 7'd93 +`define FR_USER_30 7'd94 +`define FR_USER_31 7'd95 + +//Registers needed for multi usrp master/slave configuration +// +//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0) +// +`define FR_RX_MASTER_SLAVE 7'd64 +`define bitnoFR_RX_SYNC 0 +`define bitnoFR_RX_SYNC_MASTER 1 +`define bitnoFR_RX_SYNC_SLAVE 2 + + +//Caution The master settings will output values on the io lines. +//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard. +//If you set the slave bits then your usrp won't do anything if you don't connect a master. +// Rx Master/slave control register +// +// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp +// This can be done with basic_rx boards or dbsrx boards +//dbsrx: connect master-J25 to slave-J25 +//basic rx: connect J25 to slave-J25 +//CAUTION: pay attention to the lineup of your connector. +//The red line (pin1) should be at the same side of the daughterboards on master and slave. +//If you turnaround the cable on one end you will burn your usrp. + +//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins. +//You can still link them but you must use only a 2pin or 1pin cable +//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db. +//You can use a cable like the ones found with the leds on the mainbord of a PC. +//Make sure you don't twist the cable, otherwise you connect the sync output to ground. +//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity. + + +// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line +// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings). +// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins. +`define bitnoFR_RX_SYNC_INPUT_IOPIN 15 +`define bmFR_RX_SYNC_INPUT_IOPIN (1<