From fe10969413ff8fff708f4c29ebd05876d059be5a Mon Sep 17 00:00:00 2001 From: Matt Ettus Date: Fri, 4 Sep 2009 22:33:30 -0700 Subject: Untested fixes for getting serdes onto the new fifo system. Compiles, at least --- serdes/serdes_rx.v | 79 +++++++++++------------------------------------------- serdes/serdes_tx.v | 26 +++++++++--------- 2 files changed, 28 insertions(+), 77 deletions(-) (limited to 'serdes') diff --git a/serdes/serdes_rx.v b/serdes/serdes_rx.v index aaca94ff1..afefccaa1 100644 --- a/serdes/serdes_rx.v +++ b/serdes/serdes_rx.v @@ -70,7 +70,7 @@ module serdes_rx reg [31:0] line_i; reg sop_i, eop_i, error_i; - wire error_o, sop_o, eop_o, write, read, empty, full; + wire error_o, sop_o, eop_o, write; reg [15:0] halfline; reg [8:0] holder; wire [31:0] line_o; @@ -82,14 +82,10 @@ module serdes_rx reg write_d; wire rst_rxclk; + wire have_space; + oneshot_2clk rst_1s(.clk_in(clk),.in(rst),.clk_out(ser_rx_clk),.out(rst_rxclk)); - /* - ss_rcvr #(.WIDTH(18)) ss_rcvr - (.rxclk(ser_rx_clk),.sysclk(clk),.rst(rst), - .data_in({ser_rkmsb,ser_rklsb,ser_r}),.data_out(even_data), - .clock_present()); - */ assign even_data = {ser_rkmsb,ser_rklsb,ser_r}; always @(posedge ser_rx_clk) @@ -171,7 +167,7 @@ module serdes_rx if(chosen_data[17:16] == 0) begin line_i <= {chosen_data[15:0],halfline}; - if(full) // No space to write to! Should have been avoided by flow control + if(~have_space) // No space to write to! Should have been avoided by flow control state <= ERROR; else begin @@ -204,7 +200,7 @@ module serdes_rx if(chosen_data[17:16] == 0) begin line_i <= {1'b0,1'b0,1'b0,chosen_data[15:0],halfline}; - if(full) // No space to write to! + if(~have_space) // No space to write to! state <= ERROR; else begin @@ -220,7 +216,7 @@ module serdes_rx CRC_CHECK : if(chosen_data[17:0] == {2'b00,CRC}) begin - if(full) + if(~have_space) state <= ERROR; else begin @@ -236,7 +232,7 @@ module serdes_rx ERROR : begin error_i <= 1; - if(~full) + if(have_space) state <= IDLE; end DONE : @@ -263,62 +259,19 @@ module serdes_rx else write_d <= write_pre; // Internal FIFO, size 9 is 2K, size 10 is 4K Bytes - assign write = eop_i | (error_i & ~full) | (write_d & (state != CRC_CHECK)); - - -//`define CASC 1 -`define MYFIFO 1 -//`define XILFIFO 1 + assign write = eop_i | (error_i & have_space) | (write_d & (state != CRC_CHECK)); -`ifdef CASC - cascadefifo2 #(.WIDTH(35),.SIZE(FIFOSIZE)) serdes_rx_fifo - (.clk(clk),.rst(rst),.clear(0), - .datain({error_i,sop_i,eop_i,line_i}), .write(write), .full(full), - .dataout({error_o,sop_o,eop_o,line_o}), .read(read), .empty(empty), - .space(fifo_space),.occupied(fifo_occupied) ); - assign fifo_full = full; - assign fifo_empty = empty; -`endif - -`ifdef MYFIFO - wire [FIFOSIZE-1:0] level; - fifo_2clock_casc #(.DWIDTH(35),.AWIDTH(FIFOSIZE)) serdes_rx_fifo + fifo_2clock_cascade #(.WIDTH(35),.SIZE(FIFOSIZE)) serdes_rx_fifo (.arst(rst), - .wclk(ser_rx_clk),.datain({error_i,sop_i,eop_i,line_i}), .write(write), .full(full), - .rclk(clk),.dataout({error_o,sop_o,eop_o,line_o}), .read(read), .empty(empty), - .level_rclk(level) ); - assign fifo_space = {{(16-FIFOSIZE){1'b0}},{FIFOSIZE{1'b1}}} - - {{(16-FIFOSIZE){1'b0}},level}; - assign fifo_occupied = { {(16-FIFOSIZE){1'b0}} ,level}; - assign fifo_full = full; // Note -- fifo_full is in the wrong clock domain - assign fifo_empty = empty; -`endif + .wclk(ser_rx_clk),.datain({error_i,sop_i,eop_i,line_i}), + .src_rdy_i(write), .dst_rdy_o(have_space), .space(fifo_space), + .rclk(clk),.dataout({error_o,sop_o,eop_o,line_o}), + .src_rdy_o(wr_ready_o), .dst_rdy_i(wr_ready_i), .occupied(fifo_occupied) ); -`ifdef XILFIFO - wire [FIFOSIZE-1:0] level; - fifo_generator_v4_1 ser_rx_fifo - (.din({error_i,sop_i,eop_i,line_i}), - .rd_clk(clk), - .rd_en(read), - .rst(rst), - .wr_clk(ser_rx_clk), - .wr_en(write), - .dout({error_o,sop_o,eop_o,line_o}), - .empty(empty), - .full(full), - .rd_data_count(level), - .wr_data_count() ); - assign fifo_space = {{(16-FIFOSIZE){1'b0}},{FIFOSIZE{1'b1}}} - - {{(16-FIFOSIZE){1'b0}},level}; - assign fifo_occupied = { {(16-FIFOSIZE){1'b0}}, level }; - assign fifo_full = full; // Note -- fifo_full is in the wrong clock domain - assign fifo_empty = empty; -`endif // `ifdef XILFIFO - + assign fifo_full = ~have_space; // Note -- in the wrong clock domain + assign fifo_empty = ~wr_ready_o; // Internal FIFO to Buffer interface - assign read = wr_ready_i & wr_ready_o; - assign wr_ready_o = ~empty; assign wr_dat_o = line_o; assign wr_flags_o = { 2'b00, eop_o | error_o, sop_o | error_o }; @@ -334,6 +287,6 @@ module serdes_rx always @(posedge clk) serdes_link_up <= &slu_reg[3:1]; - assign debug = { full, empty, odd, sop_i, eop_i, error_i, state[2:0] }; + assign debug = { have_space, wr_ready_o, odd, sop_i, eop_i, error_i, state[2:0] }; endmodule // serdes_rx diff --git a/serdes/serdes_tx.v b/serdes/serdes_tx.v index b6f19370e..c74414e92 100644 --- a/serdes/serdes_tx.v +++ b/serdes/serdes_tx.v @@ -77,25 +77,23 @@ module serdes_tx reg [3:0] wait_count; // Internal FIFO, size 9 is 2K, size 10 is 4K bytes - wire sop_o, eop_o, write, full, read, empty; + wire sop_o, eop_o; wire [31:0] data_o; - reg xfer_active; wire rd_sop_i = rd_flags_i[0]; wire rd_eop_i = rd_flags_i[1]; wire [1:0] rd_occ_i = rd_flags_i[3:2]; // Unused - - cascadefifo2 #(.WIDTH(34),.SIZE(FIFOSIZE)) serdes_tx_fifo - (.clk(clk),.rst(rst),.clear(0), - .datain({rd_sop_i,rd_eop_i,rd_dat_i}), .write(write), .full(full), - .dataout({sop_o,eop_o,data_o}), .read(read), .empty(empty), - .space(), .occupied(fifo_occupied) ); - assign fifo_full = full; - assign fifo_empty = empty; - - assign write = rd_ready_i & rd_ready_o; - assign rd_ready_o = ~full; + wire have_data, empty; + fifo_cascade #(.WIDTH(34),.SIZE(FIFOSIZE)) serdes_tx_fifo + (.clk(clk),.reset(rst),.clear(0), + .datain({rd_sop_i,rd_eop_i,rd_dat_i}), .src_rdy_i(rd_ready_i), .dst_rdy_o(rd_ready_o), + .dataout({sop_o,eop_o,data_o}), .dst_rdy_i(read), .src_rdy_o(have_data), + .space(), .occupied(fifo_occupied) ); + + assign fifo_full = ~rd_ready_o; + assign empty = ~have_data; + assign fifo_empty = empty; // FIXME Implement flow control reg [15:0] second_word; @@ -182,7 +180,7 @@ module serdes_tx CRC16_D16 crc_blk( (state==RUN1) ? data_o[15:0] : data_o[31:16], CRC, nextCRC); - assign debug = { 26'd0, full, empty, xfer_active, state[2:0] }; + assign debug = { 28'd0, state[2:0] }; endmodule // serdes_tx -- cgit v1.2.3