From 95bdaa00cc8c9545f5a2f90a9939fe359fb401bf Mon Sep 17 00:00:00 2001 From: Brent Stapleton Date: Fri, 25 Jan 2019 14:11:12 -0800 Subject: docs: Adding manual page for DPDK Co-authored-by: Alex Williams --- host/docs/devices.dox | 1 + host/docs/dpdk.dox | 146 ++++++++++++++++++++++++++++++++++++++++++++++++ host/docs/usrp_n3xx.dox | 5 +- 3 files changed, 151 insertions(+), 1 deletion(-) create mode 100644 host/docs/dpdk.dox (limited to 'host') diff --git a/host/docs/devices.dox b/host/docs/devices.dox index 4326fb7dc..4460c5b3b 100644 --- a/host/docs/devices.dox +++ b/host/docs/devices.dox @@ -11,6 +11,7 @@ \li \subpage page_sync \li \subpage page_calibration \li \subpage page_mpm +\li \subpage page_dpdk \li \subpage page_configfiles \li \subpage page_compat diff --git a/host/docs/dpdk.dox b/host/docs/dpdk.dox new file mode 100644 index 000000000..9359a22cd --- /dev/null +++ b/host/docs/dpdk.dox @@ -0,0 +1,146 @@ +/*! \page page_dpdk DPDK, Data Plane Development Kit + +\tableofcontents + +\section dpdk_overview DPDK Overview + +Data Plane Development Kit (DPDK) is a set of libraries that allows network +interface controller (NIC) drivers to use user space memory buffers to send and +receive data over a network. This allows us to eliminate context switching in +UHD's transport layer, which enables us to stream higher sample rates. + +\section dpdk_setup DPDK Setup + +DPDK is currently only available on Linux platforms, requires an input-output +memory management unit (IOMMU), and must be run on a multicore processor. The +following subsections will talk through the steps required to setup DPDK on your +computer. + +\subsection dpdk_installation DPDK Installation Instructions + +As a new and developing technology, the DPDK APIs are unstable. UHD requires +version 17.11. + +On Ubuntu 18.04/18.10, Fedora 28/29, or Debian Stretch (via backports), DPDK is +available in your distribution's repositories. For example, on Debian systems, +it can be obtained with the following command: + + apt install dpdk + +Otherwise, you'll need to follow the build guide at +https://doc.dpdk.org/guides-17.11/linux_gsg/build_dpdk.html . The software +releases can be found at https://core.dpdk.org/download/. + +\subsection dpdk_system_configuration System Configuration + +The official documentation regarding system configuration can be found at +https://doc.dpdk.org/guides-17.11/linux_gsg/sys_reqs.html. + +First, you'll need to enable the IOMMU and set up some hugepages. DPDK will +completely take over all available hugepages, so don't allocate all your memory +to them- the rest of UHD and the application need memory too. + +For example, on a system with 16 GB of RAM, a generous appropriation of +512x 2 MiB pages was more than sufficient, and you likely won't need that much. + +For best results, hugepages should be enabled at boot. For example, using an +Intel IOMMU with Ubuntu 18.04 IOMMU drivers, the following line was needed in +our Grub config. + + iommu=pt intel_iommu=on hugepages=2048 + +The setup of the IOMMU and hugepages is system-specific, so consult the kernel +documentation for more info. After you reboot, you should see +`/sys/kernel/iommu_groups` populated. + +Next, many of the NIC drivers are implemented atop `vfio-pci`, so you'll need to +load that driver with the following command: + + modprobe vfio-pci + +For NICs that require vfio-pci (like Intel's X520), you'll want to use the +`dpdk-devbind.py` script to the vfio-pci driver. +See https://doc.dpdk.org/guides-17.11/linux_gsg/linux_drivers.html#binding-and-unbinding-network-ports-to-from-the-kernel-modules +for more details. + +With the hugepages, IOMMU, and drivers set up, the system is ready for DPDK to +use. + +\subsection dpdk_nic_config NIC Configuration + +In order to run, you'll need to set the permissions for your user to take over +the vfio-pci devices, the hugepages, and the scheduler's settings for the +threads (at a minimum). You may consider running you applications as root, at +least while becoming familiar with DPDK. If you use a per-user config file, make +sure it's in the correct location. + +The config file will have 2 different components. First are the global DPDK +options: + + ;When present in device args, use_dpdk indicates you want DPDK to take over the UDP transports + ;The value here represents a config, so you could have another section labeled use_dpdk=myconf + ;instead and swap between them + [use_dpdk=1] + ;dpdk-mtu is the NIC's MTU setting + ;This is separate from MPM's maximum packet size--tops out at 4000 + dpdk-mtu=9000 + ;dpdk-driver is the -d flag for the DPDK EAL. If DPDK doesn't pick up the driver for your NIC + ;automatically, you may need this argument to point it to the folder where it can find the drivers + ;Note that DPDK will attempt to load _everything_ in that folder as a driver, so you may want to + ;create a separate folder with symlinks to the librte_pmd_* and librte_mempool_* libraries. + dpdk-driver=/usr/local/lib/dpdk-pmds/ + ;dpdk-corelist is the -l flag for the DPDK EAL. See more at the link + ; https://doc.dpdk.org/guides-17.11/linux_gsg/build_sample_apps.html#running-a-sample-application + dpdk-corelist=2,3 + ;dpdk-num-bufs is the total number of packet buffers allocated + ;to each direction's packet buffer pool + ;This will be multiplied by the number of NICs, but NICs on the same + ;CPU socket share a pool + dpdk-num-bufs=4095 + ;dpdk-mbuf-cache-size is the number of buffers to cache for a CPU + ;The cache reduces the interaction with the global pool + dpdk-mbuf-cache-size=315 + + +The other sections fall under per-NIC arguments. The key for NICs is the MAC +address, and it must be in a particular format. Hex digits must all be lower +case, and octets must be separated by colons. Here is an example: + + [dpdk-mac=3c:fd:fe:a2:a9:09] + ;dpdk-io-cpu selects the CPU that this NIC's driver will run on + ;Multiple NICs may occupy one CPU, but the I/O thread will completely + ;consume that CPU. Also, 0 is reserved for the master thread (i.e. + ;the initial UHD thread that calls init() for DPDK). Attempting to + ;use it as an I/O thread will only result in hanging. + dpdk-io-cpu = 1 + ;dpdk-ipv4 specifies the IPv4 address, and both the address and + ;subnet mask are required (and in this format!). DPDK uses the + ;netmask to create a basic routing table. Routing to other networks + ;(i.e. via gateways) is not permitted. + dpdk-ipv4 = 192.168.10.1/24 + + [dpdk-mac=3c:fd:fe:a2:a9:0a] + dpdk-io-cpu = 1 + dpdk-ipv4 = 192.168.20.1/24 + +\section dpdk_using Using DPDK in UHD + +Once DPDK is installed and configured on your system, it can be used with UHD. +The following steps will describe how to stream using DPDK. This feature is +currently only available with \ref mpm "MPM-enabled devices." + +\subsection dpdk_device_args Enabling DPDK with UHD Device Args + +Add the following to your device args in order to indicate that a DPDK-based UDP +transport shall be used instead of the kernel's UDP stack. + + --args="use_dpdk=1" + +Device discovery via DPDK is not currently implemented, so the device args +`mgmt_addr`, `addr`, and `second_addr` (if applicable) must all be specified at +runtime. There is no mechanism for MPM's TCP/IP control traffic to flow over a +link that is occupied by DPDK, so mgmt_addr must point to a link that is not +used for CHDR, such as N310's RJ45 port. + +*/ +// vim:ft=doxygen: diff --git a/host/docs/usrp_n3xx.dox b/host/docs/usrp_n3xx.dox index ebe5c3b57..517a3d443 100644 --- a/host/docs/usrp_n3xx.dox +++ b/host/docs/usrp_n3xx.dox @@ -77,7 +77,10 @@ The N320 has a higher maximum analog bandwidth than the N310. It can provide rates up to 250 Msps, resulting in a usable analog bandwidth of up to 200 MHz. In order to better use the high available rates, the N320/N321 devices have an additional QSFP+ connector on the back panel which can be used for streaming -data to and from the radios. +data to and from the radios. In order to facilitate the higher bandwidth, UHD +uses a technology called \subpage page_dpdk "Data Plane Development Kit (DPDK)". +See the DPDK page for details on how it can improve streaming, and how to use +it. \section n3xx_overview Overview -- cgit v1.2.3