From 21a93aeaa21d55b28103c6f4e59b88df1ca7ec36 Mon Sep 17 00:00:00 2001 From: Martin Braun Date: Tue, 21 Jul 2015 16:25:59 -0700 Subject: docs: Updated X3x0 unbricking procedure info --- host/docs/usrp_x3x0.dox | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'host') diff --git a/host/docs/usrp_x3x0.dox b/host/docs/usrp_x3x0.dox index 98e21a4d0..f3e916ac1 100644 --- a/host/docs/usrp_x3x0.dox +++ b/host/docs/usrp_x3x0.dox @@ -334,6 +334,10 @@ It is possible to put the device into an unusable state by loading bad images (" Fortunately, the USRP-X Series device can be loaded with a good image temporarily using the USB-JTAG interface. Once booted into the safe image, the user can once again load images onto the device over Ethernet or PCI Express. +See Section \ref x3x0_load_fpga_imgs_jtag on how to load the FPGA image onto the device using a JTAG interface. +After running the JTAG process, a new image can be flashed onto the device using the usual procedure +to permently recover the device. + \section x3x0_setup_network Setup Networking The USRP-X Series only supports Gigabit and Ten Gigabit Ethernet and will not work with a 10/100 Mbps interface. -- cgit v1.2.3