From 505c1d84fa7c53c0c640fab73b88c164671c7b91 Mon Sep 17 00:00:00 2001
From: Ashish Chaudhari <ashish@ettus.com>
Date: Wed, 13 Aug 2014 17:16:33 -0700
Subject: ad9361: Fixed MSVC build issues

---
 .../usrp/common/ad9361_driver/ad9361_device.cpp    | 3823 ++++++++++----------
 host/lib/usrp/common/ad9361_driver/ad9361_device.h |  250 +-
 2 files changed, 2039 insertions(+), 2034 deletions(-)

(limited to 'host/lib')

diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp
index ead4c6619..c0cc285e2 100644
--- a/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp
+++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.cpp
@@ -1,1909 +1,1914 @@
-//
-// Copyright 2014 Ettus Research LLC
-//
-
-#include "ad9361_filter_taps.h"
-#include "ad9361_gain_tables.h"
-#include "ad9361_synth_lut.h"
-#include "ad9361_client.h"
-#include "ad9361_device.h"
-#include <cstring>
-#include <cmath>
-#include <uhd/exception.hpp>
-#include <uhd/utils/log.hpp>
-#include <boost/date_time/posix_time/posix_time.hpp>
-#include <boost/thread/thread.hpp>
-#include <boost/scoped_array.hpp>
-#include <boost/format.hpp>
-
-////////////////////////////////////////////////////////////
-// the following macros evaluate to a compile time constant
-// macros By Tom Torfs - donated to the public domain
-
-/* turn a numeric literal into a hex constant
-(avoids problems with leading zeroes)
-8-bit constants max value 0x11111111, always fits in unsigned long
-*/
-#define HEX__(n) 0x##n##LU
-
-/* 8-bit conversion function */
-#define B8__(x) ((x&0x0000000FLU)?1:0) \
-+((x&0x000000F0LU)?2:0) \
-+((x&0x00000F00LU)?4:0) \
-+((x&0x0000F000LU)?8:0) \
-+((x&0x000F0000LU)?16:0) \
-+((x&0x00F00000LU)?32:0) \
-+((x&0x0F000000LU)?64:0) \
-+((x&0xF0000000LU)?128:0)
-
-/* for upto 8-bit binary constants */
-#define B8(d) ((unsigned char)B8__(HEX__(d)))
-////////////////////////////////////////////////////////////
-
-
-namespace uhd { namespace usrp {
-
-/* This is a simple comparison for very large double-precision floating
- * point numbers. It is used to prevent re-tunes for frequencies that are
- * the same but not 'exactly' because of data precision issues. */
-// TODO: see if we can avoid the need for this function
-int freq_is_nearly_equal(double a, double b) {
-    return std::max(a,b) - std::min(a,b) < 1;
-}
-
-/***********************************************************************
- * Filter functions
- **********************************************************************/
-
-/* This function takes in the calculated maximum number of FIR taps, and
- * returns a number of taps that makes AD9361 happy. */
-int get_num_taps(int max_num_taps) {
-
-    int num_taps = 0;
-    int num_taps_list[] = {16, 32, 48, 64, 80, 96, 112, 128};
-    int i;
-    for(i = 1; i < 8; i++) {
-        if(max_num_taps >= num_taps_list[i]) {
-            continue;
-        } else {
-            num_taps = num_taps_list[i - 1];
-            break;
-        }
-    } if(num_taps == 0) { num_taps = 128; }
-
-    return num_taps;
-}
-
-/* Program either the RX or TX FIR filter.
- *
- * The process is the same for both filters, but the function must be told
- * how many taps are in the filter, and given a vector of the taps
- * themselves.  */
-
-void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs)
-{
-    boost::uint16_t base;
-
-    /* RX and TX filters use largely identical sets of programming registers.
-     Select the appropriate bank of registers here. */
-    if (direction == RX) {
-        base = 0x0f0;
-    } else {
-        base = 0x060;
-    }
-
-    /* Encode number of filter taps for programming register */
-    boost::uint8_t reg_numtaps = (((num_taps / 16) - 1) & 0x07) << 5;
-
-    /* Turn on the filter clock. */
-    _io_iface->poke8(base + 5, reg_numtaps | 0x1a);
-    boost::this_thread::sleep(boost::posix_time::milliseconds(1));
-
-    /* Zero the unused taps just in case they have stale data */
-    int addr;
-    for (addr = num_taps; addr < 128; addr++) {
-        _io_iface->poke8(base + 0, addr);
-        _io_iface->poke8(base + 1, 0x0);
-        _io_iface->poke8(base + 2, 0x0);
-        _io_iface->poke8(base + 5, reg_numtaps | 0x1e);
-        _io_iface->poke8(base + 4, 0x00);
-        _io_iface->poke8(base + 4, 0x00);
-    }
-
-    /* Iterate through indirect programming of filter coeffs using ADI recomended procedure */
-    for (addr = 0; addr < num_taps; addr++) {
-        _io_iface->poke8(base + 0, addr);
-        _io_iface->poke8(base + 1, (coeffs[addr]) & 0xff);
-        _io_iface->poke8(base + 2, (coeffs[addr] >> 8) & 0xff);
-        _io_iface->poke8(base + 5, reg_numtaps | 0x1e);
-        _io_iface->poke8(base + 4, 0x00);
-        _io_iface->poke8(base + 4, 0x00);
-    }
-
-    /* UG-671 states (page 25) (paraphrased and clarified):
-     " After the table has been programmed, write to register BASE+5 with the write bit D2 cleared and D1 high.
-     Then, write to register BASE+5 again with D1 clear, thus ensuring that the write bit resets internally
-     before the clock stops. Wait 4 sample clock periods after setting D2 high while that data writes into the table"
-     */
-
-    _io_iface->poke8(base + 5, reg_numtaps | 0x1A);
-    if (direction == RX) {
-        _io_iface->poke8(base + 5, reg_numtaps | 0x18);
-        _io_iface->poke8(base + 6, 0x02); /* Also turn on -6dB Rx gain here, to stop filter overfow.*/
-    } else {
-        _io_iface->poke8(base + 5, reg_numtaps | 0x19); /* Also turn on -6dB Tx gain here, to stop filter overfow.*/
-    }
-}
-
-
-/* Program the RX FIR Filter. */
-void ad9361_device_t::_setup_rx_fir(size_t num_taps)
-{
-    boost::scoped_array<boost::uint16_t> coeffs(new boost::uint16_t[num_taps]);
-    for (size_t i = 0; i < num_taps; i++) {
-        switch (num_taps) {
-        case 128:
-            coeffs[i] = boost::uint16_t(hb127_coeffs[i]);
-            break;
-        case 96:
-            coeffs[i] = boost::uint16_t(hb95_coeffs[i]);
-            break;
-        case 64:
-            coeffs[i] = boost::uint16_t(hb63_coeffs[i]);
-            break;
-        case 48:
-            coeffs[i] = boost::uint16_t(hb47_coeffs[i]);
-            break;
-        default:
-            throw uhd::runtime_error("[ad9361_device_t] Unsupported number of Rx FIR taps.");
-        }
-    }
-
-    _program_fir_filter(RX, num_taps, coeffs.get());
-}
-
-/* Program the TX FIR Filter. */
-void ad9361_device_t::_setup_tx_fir(size_t num_taps)
-{
-    boost::scoped_array<boost::uint16_t> coeffs(new boost::uint16_t[num_taps]);
-    for (size_t i = 0; i < num_taps; i++) {
-        switch (num_taps) {
-        case 128:
-            coeffs[i] = boost::uint16_t(hb127_coeffs[i]);
-            break;
-        case 96:
-            coeffs[i] = boost::uint16_t(hb95_coeffs[i]);
-            break;
-        case 64:
-            coeffs[i] = boost::uint16_t(hb63_coeffs[i]);
-            break;
-        case 48:
-            coeffs[i] = boost::uint16_t(hb47_coeffs[i]);
-            break;
-        default:
-            throw uhd::runtime_error("[ad9361_device_t] Unsupported number of Tx FIR taps.");
-        }
-    }
-
-    _program_fir_filter(TX, num_taps, coeffs.get());
-}
-
-/***********************************************************************
- * Calibration functions
- ***********************************************************************/
-
-/* Calibrate and lock the BBPLL.
- *
- * This function should be called anytime the BBPLL is tuned. */
-void ad9361_device_t::_calibrate_lock_bbpll()
-{
-    _io_iface->poke8(0x03F, 0x05); // Start the BBPLL calibration
-    _io_iface->poke8(0x03F, 0x01); // Clear the 'start' bit
-
-    /* Increase BBPLL KV and phase margin. */
-    _io_iface->poke8(0x04c, 0x86);
-    _io_iface->poke8(0x04d, 0x01);
-    _io_iface->poke8(0x04d, 0x05);
-
-    /* Wait for BBPLL lock. */
-    size_t count = 0;
-    while (!(_io_iface->peek8(0x05e) & 0x80)) {
-        if (count > 1000) {
-            throw uhd::runtime_error("[ad9361_device_t] BBPLL not locked");
-            break;
-        }
-        count++;
-        boost::this_thread::sleep(boost::posix_time::milliseconds(2));
-    }
-}
-
-/* Calibrate the synthesizer charge pumps.
- *
- * Technically, this calibration only needs to be done once, at device
- * initialization. */
-void ad9361_device_t::_calibrate_synth_charge_pumps()
-{
-    /* If this function ever gets called, and the ENSM isn't already in the
-     * ALERT state, then something has gone horribly wrong. */
-    if ((_io_iface->peek8(0x017) & 0x0F) != 5) {
-        throw uhd::runtime_error("[ad9361_device_t] AD9361 not in ALERT during cal");
-    }
-
-    /* Calibrate the RX synthesizer charge pump. */
-    size_t count = 0;
-    _io_iface->poke8(0x23d, 0x04);
-    while (!(_io_iface->peek8(0x244) & 0x80)) {
-        if (count > 5) {
-            throw uhd::runtime_error("[ad9361_device_t] RX charge pump cal failure");
-            break;
-        }
-        count++;
-        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
-    }
-    _io_iface->poke8(0x23d, 0x00);
-
-    /* Calibrate the TX synthesizer charge pump. */
-    count = 0;
-    _io_iface->poke8(0x27d, 0x04);
-    while (!(_io_iface->peek8(0x284) & 0x80)) {
-        if (count > 5) {
-            throw uhd::runtime_error("[ad9361_device_t] TX charge pump cal failure");
-            break;
-        }
-        count++;
-        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
-    }
-    _io_iface->poke8(0x27d, 0x00);
-}
-
-/* Calibrate the analog BB RX filter.
- *
- * Note that the filter calibration depends heavily on the baseband
- * bandwidth, so this must be re-done after any change to the RX sample
- * rate. */
-double ad9361_device_t::_calibrate_baseband_rx_analog_filter()
-{
-    /* For filter tuning, baseband BW is half the complex BW, and must be
-     * between 28e6 and 0.2e6. */
-    double bbbw = _baseband_bw / 2.0;
-    if (bbbw > 28e6) {
-        bbbw = 28e6;
-    } else if (bbbw < 0.20e6) {
-        bbbw = 0.20e6;
-    }
-
-    double rxtune_clk = ((1.4 * bbbw * 2 * M_PI) / M_LN2);
-    _rx_bbf_tunediv = std::min<boost::uint16_t>(511, std::ceil<boost::uint16_t>(_bbpll_freq / rxtune_clk));
-    _regs.bbftune_config = (_regs.bbftune_config & 0xFE)
-            | ((_rx_bbf_tunediv >> 8) & 0x0001);
-
-    double bbbw_mhz = bbbw / 1e6;
-    double temp = ((bbbw_mhz - std::floor(bbbw_mhz)) * 1000) / 7.8125;
-    boost::uint8_t bbbw_khz = std::min<boost::uint8_t>(127, (std::floor<boost::uint8_t>(temp + 0.5)));
-
-    /* Set corner frequencies and dividers. */
-    _io_iface->poke8(0x1fb, (boost::uint8_t) (bbbw_mhz));
-    _io_iface->poke8(0x1fc, bbbw_khz);
-    _io_iface->poke8(0x1f8, (_rx_bbf_tunediv & 0x00FF));
-    _io_iface->poke8(0x1f9, _regs.bbftune_config);
-
-    /* RX Mix Voltage settings - only change with apps engineer help. */
-    _io_iface->poke8(0x1d5, 0x3f);
-    _io_iface->poke8(0x1c0, 0x03);
-
-    /* Enable RX1 & RX2 filter tuners. */
-    _io_iface->poke8(0x1e2, 0x02);
-    _io_iface->poke8(0x1e3, 0x02);
-
-    /* Run the calibration! */
-    size_t count = 0;
-    _io_iface->poke8(0x016, 0x80);
-    while (_io_iface->peek8(0x016) & 0x80) {
-        if (count > 100) {
-            throw uhd::runtime_error("[ad9361_device_t] RX baseband filter cal FAILURE");
-            break;
-        }
-        count++;
-        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
-    }
-
-    /* Disable RX1 & RX2 filter tuners. */
-    _io_iface->poke8(0x1e2, 0x03);
-    _io_iface->poke8(0x1e3, 0x03);
-
-    return bbbw;
-}
-
-/* Calibrate the analog BB TX filter.
- *
- * Note that the filter calibration depends heavily on the baseband
- * bandwidth, so this must be re-done after any change to the TX sample
- * rate. */
-double ad9361_device_t::_calibrate_baseband_tx_analog_filter()
-{
-    /* For filter tuning, baseband BW is half the complex BW, and must be
-     * between 28e6 and 0.2e6. */
-    double bbbw = _baseband_bw / 2.0;
-    if (bbbw > 20e6) {
-        bbbw = 20e6;
-    } else if (bbbw < 0.625e6) {
-        bbbw = 0.625e6;
-    }
-
-    double txtune_clk = ((1.6 * bbbw * 2 * M_PI) / M_LN2);
-    boost::uint16_t txbbfdiv = std::min<boost::uint16_t>(511, (std::ceil<boost::uint16_t>(_bbpll_freq / txtune_clk)));
-    _regs.bbftune_mode = (_regs.bbftune_mode & 0xFE)
-            | ((txbbfdiv >> 8) & 0x0001);
-
-    /* Program the divider values. */
-    _io_iface->poke8(0x0d6, (txbbfdiv & 0x00FF));
-    _io_iface->poke8(0x0d7, _regs.bbftune_mode);
-
-    /* Enable the filter tuner. */
-    _io_iface->poke8(0x0ca, 0x22);
-
-    /* Calibrate! */
-    size_t count = 0;
-    _io_iface->poke8(0x016, 0x40);
-    while (_io_iface->peek8(0x016) & 0x40) {
-        if (count > 100) {
-            throw uhd::runtime_error("[ad9361_device_t] TX baseband filter cal FAILURE");
-            break;
-        }
-
-        count++;
-        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
-    }
-
-    /* Disable the filter tuner. */
-    _io_iface->poke8(0x0ca, 0x26);
-
-    return bbbw;
-}
-
-/* Calibrate the secondary TX filter.
- *
- * This filter also depends on the TX sample rate, so if a rate change is
- * made, the previous calibration will no longer be valid. */
-void ad9361_device_t::_calibrate_secondary_tx_filter()
-{
-    /* For filter tuning, baseband BW is half the complex BW, and must be
-     * between 20e6 and 0.53e6. */
-    double bbbw = _baseband_bw / 2.0;
-    if (bbbw > 20e6) {
-        bbbw = 20e6;
-    } else if (bbbw < 0.53e6) {
-        bbbw = 0.53e6;
-    }
-
-    double bbbw_mhz = bbbw / 1e6;
-
-    /* Start with a resistor value of 100 Ohms. */
-    int res = 100;
-
-    /* Calculate target corner frequency. */
-    double corner_freq = 5 * bbbw_mhz * 2 * M_PI;
-
-    /* Iterate through RC values to determine correct combination. */
-    int cap = 0;
-    int i;
-    for (i = 0; i <= 3; i++) {
-        cap = (std::floor<int>(0.5 + ((1 / ((corner_freq * res) * 1e6)) * 1e12)))
-                - 12;
-
-        if (cap <= 63) {
-            break;
-        }
-
-        res = res * 2;
-    }
-    if (cap > 63) {
-        cap = 63;
-    }
-
-    boost::uint8_t reg0d0, reg0d1, reg0d2;
-
-    /* Translate baseband bandwidths to register settings. */
-    if ((bbbw_mhz * 2) <= 9) {
-        reg0d0 = 0x59;
-    } else if (((bbbw_mhz * 2) > 9) && ((bbbw_mhz * 2) <= 24)) {
-        reg0d0 = 0x56;
-    } else if ((bbbw_mhz * 2) > 24) {
-        reg0d0 = 0x57;
-    } else {
-        throw uhd::runtime_error("[ad9361_device_t] Cal2ndTxFil: INVALID_CODE_PATH bad bbbw_mhz");
-        reg0d0 = 0x00;
-    }
-
-    /* Translate resistor values to register settings. */
-    if (res == 100) {
-        reg0d1 = 0x0c;
-    } else if (res == 200) {
-        reg0d1 = 0x04;
-    } else if (res == 400) {
-        reg0d1 = 0x03;
-    } else if (res == 800) {
-        reg0d1 = 0x01;
-    } else {
-        reg0d1 = 0x0c;
-    }
-
-    reg0d2 = cap;
-
-    /* Program the above-calculated values. Sweet. */
-    _io_iface->poke8(0x0d2, reg0d2);
-    _io_iface->poke8(0x0d1, reg0d1);
-    _io_iface->poke8(0x0d0, reg0d0);
-}
-
-/* Calibrate the RX TIAs.
- *
- * Note that the values in the TIA register, after calibration, vary with
- * the RX gain settings. */
-void ad9361_device_t::_calibrate_rx_TIAs()
-{
-    boost::uint8_t reg1eb = _io_iface->peek8(0x1eb) & 0x3F;
-    boost::uint8_t reg1ec = _io_iface->peek8(0x1ec) & 0x7F;
-    boost::uint8_t reg1e6 = _io_iface->peek8(0x1e6) & 0x07;
-    boost::uint8_t reg1db = 0x00;
-    boost::uint8_t reg1dc = 0x00;
-    boost::uint8_t reg1dd = 0x00;
-    boost::uint8_t reg1de = 0x00;
-    boost::uint8_t reg1df = 0x00;
-
-    /* For calibration, baseband BW is half the complex BW, and must be
-     * between 28e6 and 0.2e6. */
-    double bbbw = _baseband_bw / 2.0;
-    if (bbbw > 20e6) {
-        bbbw = 20e6;
-    } else if (bbbw < 0.20e6) {
-        bbbw = 0.20e6;
-    }
-    double ceil_bbbw_mhz = std::ceil(bbbw / 1e6);
-
-    /* Do some crazy resistor and capacitor math. */
-    int Cbbf = (reg1eb * 160) + (reg1ec * 10) + 140;
-    int R2346 = 18300 * (reg1e6 & 0x07);
-    double CTIA_fF = (Cbbf * R2346 * 0.56) / 3500;
-
-    /* Translate baseband BW to register settings. */
-    if (ceil_bbbw_mhz <= 3) {
-        reg1db = 0xe0;
-    } else if ((ceil_bbbw_mhz > 3) && (ceil_bbbw_mhz <= 10)) {
-        reg1db = 0x60;
-    } else if (ceil_bbbw_mhz > 10) {
-        reg1db = 0x20;
-    } else {
-        throw uhd::runtime_error("[ad9361_device_t] CalRxTias: INVALID_CODE_PATH bad bbbw_mhz");
-    }
-
-    if (CTIA_fF > 2920) {
-        reg1dc = 0x40;
-        reg1de = 0x40;
-        boost::uint8_t temp = (boost::uint8_t) std::min<boost::uint8_t>(127,
-                (std::floor<boost::uint8_t>(0.5 + ((CTIA_fF - 400.0) / 320.0))));
-        reg1dd = temp;
-        reg1df = temp;
-    } else {
-        boost::uint8_t temp = std::floor<boost::uint8_t>(0.5 + ((CTIA_fF - 400.0) / 40.0))
-                + 0x40;
-        reg1dc = temp;
-        reg1de = temp;
-        reg1dd = 0;
-        reg1df = 0;
-    }
-
-    /* w00t. Settings calculated. Program them and roll out. */
-    _io_iface->poke8(0x1db, reg1db);
-    _io_iface->poke8(0x1dd, reg1dd);
-    _io_iface->poke8(0x1df, reg1df);
-    _io_iface->poke8(0x1dc, reg1dc);
-    _io_iface->poke8(0x1de, reg1de);
-}
-
-/* Setup the AD9361 ADC.
- *
- * There are 40 registers that control the ADC's operation, most of the
- * values of which must be derived mathematically, dependent on the current
- * setting of the BBPLL. Note that the order of calculation is critical, as
- * some of the 40 registers depend on the values in others. */
-void ad9361_device_t::_setup_adc()
-{
-    double bbbw_mhz = (((_bbpll_freq / 1e6) / _rx_bbf_tunediv) * M_LN2) \
-                  / (1.4 * 2 * M_PI);
-
-    /* For calibration, baseband BW is half the complex BW, and must be
-     * between 28e6 and 0.2e6. */
-    if(bbbw_mhz > 28) {
-        bbbw_mhz = 28;
-    } else if (bbbw_mhz < 0.20) {
-        bbbw_mhz = 0.20;
-    }
-
-    boost::uint8_t rxbbf_c3_msb = _io_iface->peek8(0x1eb) & 0x3F;
-    boost::uint8_t rxbbf_c3_lsb = _io_iface->peek8(0x1ec) & 0x7F;
-    boost::uint8_t rxbbf_r2346 = _io_iface->peek8(0x1e6) & 0x07;
-
-    double fsadc = _adcclock_freq / 1e6;
-
-    /* Sort out the RC time constant for our baseband bandwidth... */
-    double rc_timeconst = 0.0;
-    if(bbbw_mhz < 18) {
-        rc_timeconst = (1 / ((1.4 * 2 * M_PI) \
-                            * (18300 * rxbbf_r2346)
-                            * ((160e-15 * rxbbf_c3_msb)
-                                + (10e-15 * rxbbf_c3_lsb) + 140e-15)
-                            * (bbbw_mhz * 1e6)));
-    } else {
-        rc_timeconst = (1 / ((1.4 * 2 * M_PI) \
-                            * (18300 * rxbbf_r2346)
-                            * ((160e-15 * rxbbf_c3_msb)
-                                + (10e-15 * rxbbf_c3_lsb) + 140e-15)
-                            * (bbbw_mhz * 1e6) * (1 + (0.01 * (bbbw_mhz - 18)))));
-    }
-
-    double scale_res = sqrt(1 / rc_timeconst);
-    double scale_cap = sqrt(1 / rc_timeconst);
-
-    double scale_snr = (_adcclock_freq < 80e6) ? 1.0 : 1.584893192;
-    double maxsnr = 640 / 160;
-
-    /* Calculate the values for all 40 settings registers.
-     *
-     * DO NOT TOUCH THIS UNLESS YOU KNOW EXACTLY WHAT YOU ARE DOING. kthx.*/
-    boost::uint8_t data[40];
-    data[0] = 0;    data[1] = 0; data[2] = 0; data[3] = 0x24;
-    data[4] = 0x24; data[5] = 0; data[6] = 0;
-    data[7] = std::min<boost::uint8_t>(124, (std::floor<boost::uint8_t>(-0.5
-                    + (80.0 * scale_snr * scale_res
-                    * std::min<double>(1.0, sqrt(maxsnr * fsadc / 640.0))))));
-    double data007 = data[7];
-    data[8] = std::min<boost::uint8_t>(255, (std::floor<boost::uint8_t>(0.5
-                    + ((20.0 * (640.0 / fsadc) * ((data007 / 80.0))
-                    / (scale_res * scale_cap))))));
-    data[10] = std::min<boost::uint8_t>(127, (std::floor<boost::uint8_t>(-0.5 + (77.0 * scale_res
-                    * std::min<double>(1.0, sqrt(maxsnr * fsadc / 640.0))))));
-    double data010 = data[10];
-    data[9] = std::min<boost::uint8_t>(127, (std::floor<boost::uint8_t>(0.8 * data010)));
-    data[11] = std::min<boost::uint8_t>(255, (std::floor<boost::uint8_t>(0.5
-                    + (20.0 * (640.0 / fsadc) * ((data010 / 77.0)
-                    / (scale_res * scale_cap))))));
-    data[12] = std::min<boost::uint8_t>(127, (std::floor<boost::uint8_t>(-0.5
-                    + (80.0 * scale_res * std::min<double>(1.0,
-                    sqrt(maxsnr * fsadc / 640.0))))));
-    double data012 = data[12];
-    data[13] = std::min<boost::uint8_t>(255, (std::floor<boost::uint8_t>(-1.5
-                    + (20.0 * (640.0 / fsadc) * ((data012 / 80.0)
-                    / (scale_res * scale_cap))))));
-    data[14] = 21 * (std::floor<boost::uint8_t>(0.1 * 640.0 / fsadc));
-    data[15] = std::min<boost::uint8_t>(127, (1.025 * data007));
-    double data015 = data[15];
-    data[16] = std::min<boost::uint8_t>(127, (std::floor<boost::uint8_t>((data015
-                    * (0.98 + (0.02 * std::max<double>(1.0,
-                    (640.0 / fsadc) / maxsnr)))))));
-    data[17] = data[15];
-    data[18] = std::min<boost::uint8_t>(127, (0.975 * (data010)));
-    double data018 = data[18];
-    data[19] = std::min<boost::uint8_t>(127, (std::floor<boost::uint8_t>((data018
-                    * (0.98 + (0.02 * std::max<double>(1.0,
-                    (640.0 / fsadc) / maxsnr)))))));
-    data[20] = data[18];
-    data[21] = std::min<boost::uint8_t>(127, (0.975 * data012));
-    double data021 = data[21];
-    data[22] = std::min<boost::uint8_t>(127, (std::floor<boost::uint8_t>((data021
-                    * (0.98 + (0.02 * std::max<double>(1.0,
-                    (640.0 / fsadc) / maxsnr)))))));
-    data[23] = data[21];
-    data[24] = 0x2e;
-    data[25] = std::floor<boost::uint8_t>(128.0 + std::min<double>(63.0,
-                    63.0 * (fsadc / 640.0)));
-    data[26] = std::floor<boost::uint8_t>(std::min<double>(63.0, 63.0 * (fsadc / 640.0)
-                    * (0.92 + (0.08 * (640.0 / fsadc)))));
-    data[27] = std::floor<boost::uint8_t>(std::min<double>(63.0,
-                    32.0 * sqrt(fsadc / 640.0)));
-    data[28] = std::floor<boost::uint8_t>(128.0 + std::min<double>(63.0,
-                    63.0 * (fsadc / 640.0)));
-    data[29] = std::floor<boost::uint8_t>(std::min<double>(63.0,
-                    63.0 * (fsadc / 640.0)
-                    * (0.92 + (0.08 * (640.0 / fsadc)))));
-    data[30] = std::floor<boost::uint8_t>(std::min<double>(63.0,
-                    32.0 * sqrt(fsadc / 640.0)));
-    data[31] = std::floor<boost::uint8_t>(128.0 + std::min<double>(63.0,
-                    63.0 * (fsadc / 640.0)));
-    data[32] = std::floor<boost::uint8_t>(std::min<double>(63.0,
-                    63.0 * (fsadc / 640.0) * (0.92
-                    + (0.08 * (640.0 / fsadc)))));
-    data[33] = std::floor<boost::uint8_t>(std::min<double>(63.0,
-                    63.0 * sqrt(fsadc / 640.0)));
-    data[34] = std::min<boost::uint8_t>(127, (std::floor<boost::uint8_t>(64.0
-                    * sqrt(fsadc / 640.0))));
-    data[35] = 0x40;
-    data[36] = 0x40;
-    data[37] = 0x2c;
-    data[38] = 0x00;
-    data[39] = 0x00;
-
-    /* Program the registers! */
-    for(size_t i = 0; i < 40; i++) {
-        _io_iface->poke8(0x200+i, data[i]);
-    }
-}
-
-/* Calibrate the baseband DC offset.
- *
- * Note that this function is called from within the TX quadrature
- * calibration function! */
-void ad9361_device_t::_calibrate_baseband_dc_offset()
-{
-    _io_iface->poke8(0x193, 0x3f); // Calibration settings
-    _io_iface->poke8(0x190, 0x0f); // Set tracking coefficient
-    //write_ad9361_reg(device, 0x190, /*0x0f*//*0xDF*/0x80*1 | 0x40*1 | (16+8/*+4*/)); // Set tracking coefficient: don't *4 counter, do decim /4, increased gain shift
-    _io_iface->poke8(0x194, 0x01); // More calibration settings
-
-    /* Start that calibration, baby. */
-    size_t count = 0;
-    _io_iface->poke8(0x016, 0x01);
-    while (_io_iface->peek8(0x016) & 0x01) {
-        if (count > 100) {
-            throw uhd::runtime_error("[ad9361_device_t] Baseband DC Offset Calibration Failure");
-            break;
-        }
-        count++;
-        boost::this_thread::sleep(boost::posix_time::milliseconds(5));
-    }
-}
-
-/* Calibrate the RF DC offset.
- *
- * Note that this function is called from within the TX quadrature
- * calibration function. */
-void ad9361_device_t::_calibrate_rf_dc_offset()
-{
-    /* Some settings are frequency-dependent. */
-    if (_rx_freq < 4e9) {
-        _io_iface->poke8(0x186, 0x32); // RF DC Offset count
-        _io_iface->poke8(0x187, 0x24);
-        _io_iface->poke8(0x188, 0x05);
-    } else {
-        _io_iface->poke8(0x186, 0x28); // RF DC Offset count
-        _io_iface->poke8(0x187, 0x34);
-        _io_iface->poke8(0x188, 0x06);
-    }
-
-    _io_iface->poke8(0x185, 0x20); // RF DC Offset wait count
-    _io_iface->poke8(0x18b, 0x83);
-    _io_iface->poke8(0x189, 0x30);
-
-    /* Run the calibration! */
-    size_t count = 0;
-    _io_iface->poke8(0x016, 0x02);
-    while (_io_iface->peek8(0x016) & 0x02) {
-        if (count > 100) {
-            throw uhd::runtime_error("[ad9361_device_t] RF DC Offset Calibration Failure");
-            break;
-        }
-        count++;
-        boost::this_thread::sleep(boost::posix_time::milliseconds(50));
-    }
-}
-
-/* Start the RX quadrature calibration.
- *
- * Note that we are using AD9361's 'tracking' feature for RX quadrature
- * calibration, so once it starts it continues to free-run during operation.
- * It should be re-run for large frequency changes. */
-void ad9361_device_t::_calibrate_rx_quadrature()
-{
-    /* Configure RX Quadrature calibration settings. */
-    _io_iface->poke8(0x168, 0x03); // Set tone level for cal
-    _io_iface->poke8(0x16e, 0x25); // RX Gain index to use for cal
-    _io_iface->poke8(0x16a, 0x75); // Set Kexp phase
-    _io_iface->poke8(0x16b, 0x15); // Set Kexp amplitude
-    _io_iface->poke8(0x169, 0xcf); // Continuous tracking mode
-    _io_iface->poke8(0x18b, 0xad);
-}
-
-/* TX quadtrature calibration routine.
- *
- * The TX quadrature needs to be done twice, once for each TX chain, with
- * only one register change in between. Thus, this function enacts the
- * calibrations, and it is called from calibrate_tx_quadrature. */
-void ad9361_device_t::_tx_quadrature_cal_routine() {
-    /* This is a weird process, but here is how it works:
-     * 1) Read the calibrated NCO frequency bits out of 0A3.
-     * 2) Write the two bits to the RX NCO freq part of 0A0.
-     * 3) Re-read 0A3 to get bits [5:0] because maybe they changed?
-     * 4) Update only the TX NCO freq bits in 0A3.
-     * 5) Profit (I hope). */
-    boost::uint8_t reg0a3 = _io_iface->peek8(0x0a3);
-    boost::uint8_t nco_freq = (reg0a3 & 0xC0);
-    _io_iface->poke8(0x0a0, 0x15 | (nco_freq >> 1));
-    reg0a3 = _io_iface->peek8(0x0a3);
-    _io_iface->poke8(0x0a3, (reg0a3 & 0x3F) | nco_freq);
-
-    /* It is possible to reach a configuration that won't operate correctly,
-     * where the two test tones used for quadrature calibration are outside
-     * of the RX BBF, and therefore don't make it to the ADC. We will check
-     * for that scenario here. */
-    double max_cal_freq = (((_baseband_bw * _tfir_factor)
-            * ((nco_freq >> 6) + 1)) / 32) * 2;
-    double bbbw = _baseband_bw / 2.0; // bbbw represents the one-sided BW
-    if (bbbw > 28e6) {
-        bbbw = 28e6;
-    } else if (bbbw < 0.20e6) {
-        bbbw = 0.20e6;
-    }
-    if (max_cal_freq > bbbw)
-        throw uhd::runtime_error("[ad9361_device_t] max_cal_freq > bbbw");
-
-    _io_iface->poke8(0x0a1, 0x7B); // Set tracking coefficient
-    _io_iface->poke8(0x0a9, 0xff); // Cal count
-    _io_iface->poke8(0x0a2, 0x7f); // Cal Kexp
-    _io_iface->poke8(0x0a5, 0x01); // Cal magnitude threshold VVVV
-    _io_iface->poke8(0x0a6, 0x01);
-
-    /* The gain table index used for calibration must be adjusted for the
-     * mid-table to get a TIA index = 1 and LPF index = 0. */
-    if ((_rx_freq >= 1300e6) && (_rx_freq < 4000e6)) {
-        _io_iface->poke8(0x0aa, 0x22); // Cal gain table index
-    } else {
-        _io_iface->poke8(0x0aa, 0x25); // Cal gain table index
-    }
-
-    _io_iface->poke8(0x0a4, 0xf0); // Cal setting conut
-    _io_iface->poke8(0x0ae, 0x00); // Cal LPF gain index (split mode)
-
-    /* First, calibrate the baseband DC offset. */
-    _calibrate_baseband_dc_offset();
-
-    /* Second, calibrate the RF DC offset. */
-    _calibrate_rf_dc_offset();
-
-    /* Now, calibrate the TX quadrature! */
-    size_t count = 0;
-    _io_iface->poke8(0x016, 0x10);
-    while (_io_iface->peek8(0x016) & 0x10) {
-        if (count > 100) {
-            throw uhd::runtime_error("[ad9361_device_t] TX Quadrature Calibration Failure");
-            break;
-        }
-        count++;
-        boost::this_thread::sleep(boost::posix_time::milliseconds(10));
-    }
-}
-
-/* Run the TX quadrature calibration.
- *
- * Note that from within this function we are also triggering the baseband
- * and RF DC calibrations. */
-void ad9361_device_t::_calibrate_tx_quadrature()
-{
-    /* Make sure we are, in fact, in the ALERT state. If not, something is
-     * terribly wrong in the driver execution flow. */
-    if ((_io_iface->peek8(0x017) & 0x0F) != 5) {
-        throw uhd::runtime_error("[ad9361_device_t] TX Quad Cal started, but not in ALERT");
-    }
-
-    /* Turn off free-running and continuous calibrations. Note that this
-     * will get turned back on at the end of the RX calibration routine. */
-    _io_iface->poke8(0x169, 0xc0);
-
-    /* This calibration must be done in a certain order, and for both TX_A
-     * and TX_B, separately. Store the original setting so that we can
-     * restore it later. */
-    boost::uint8_t orig_reg_inputsel = _regs.inputsel;
-
-    /***********************************************************************
-     * TX1/2-A Calibration
-     **********************************************************************/
-    _regs.inputsel = _regs.inputsel & 0xBF;
-    _io_iface->poke8(0x004, _regs.inputsel);
-
-    _tx_quadrature_cal_routine();
-
-    /***********************************************************************
-     * TX1/2-B Calibration
-     **********************************************************************/
-    _regs.inputsel = _regs.inputsel | 0x40;
-    _io_iface->poke8(0x004, _regs.inputsel);
-
-    _tx_quadrature_cal_routine();
-
-    /***********************************************************************
-     * fin
-     **********************************************************************/
-    _regs.inputsel = orig_reg_inputsel;
-    _io_iface->poke8(0x004, orig_reg_inputsel);
-}
-
-
-/***********************************************************************
- * Other Misc Setup Functions
- ***********************************************************************/
-
-/* Program the mixer gain table.
- *
- * Note that this table is fixed for all frequency settings. */
-void ad9361_device_t::_program_mixer_gm_subtable()
-{
-    boost::uint8_t gain[] = { 0x78, 0x74, 0x70, 0x6C, 0x68, 0x64, 0x60, 0x5C, 0x58,
-            0x54, 0x50, 0x4C, 0x48, 0x30, 0x18, 0x00 };
-    boost::uint8_t gm[] = { 0x00, 0x0D, 0x15, 0x1B, 0x21, 0x25, 0x29, 0x2C, 0x2F, 0x31,
-            0x33, 0x34, 0x35, 0x3A, 0x3D, 0x3E };
-
-    /* Start the clock. */
-    _io_iface->poke8(0x13f, 0x02);
-
-    /* Program the GM Sub-table. */
-    int i;
-    for (i = 15; i >= 0; i--) {
-        _io_iface->poke8(0x138, i);
-        _io_iface->poke8(0x139, gain[(15 - i)]);
-        _io_iface->poke8(0x13A, 0x00);
-        _io_iface->poke8(0x13B, gm[(15 - i)]);
-        _io_iface->poke8(0x13F, 0x06);
-        _io_iface->poke8(0x13C, 0x00);
-        _io_iface->poke8(0x13C, 0x00);
-    }
-
-    /* Clear write bit and stop clock. */
-    _io_iface->poke8(0x13f, 0x02);
-    _io_iface->poke8(0x13C, 0x00);
-    _io_iface->poke8(0x13C, 0x00);
-    _io_iface->poke8(0x13f, 0x00);
-}
-
-/* Program the gain table.
- *
- * There are three different gain tables for different frequency ranges! */
-void ad9361_device_t::_program_gain_table() {
-    /* Figure out which gain table we should be using for our current
-     * frequency band. */
-    boost::uint8_t (*gain_table)[5] = NULL;
-    boost::uint8_t new_gain_table;
-    if (_rx_freq < 1300e6) {
-        gain_table = gain_table_sub_1300mhz;
-        new_gain_table = 1;
-    } else if (_rx_freq < 4e9) {
-        gain_table = gain_table_1300mhz_to_4000mhz;
-        new_gain_table = 2;
-    } else if (_rx_freq <= 6e9) {
-        gain_table = gain_table_4000mhz_to_6000mhz;
-        new_gain_table = 3;
-    } else {
-        throw uhd::runtime_error("[ad9361_device_t] Wrong _rx_freq value");
-        new_gain_table = 1;
-    }
-
-    /* Only re-program the gain table if there has been a band change. */
-    if (_curr_gain_table == new_gain_table) {
-        return;
-    } else {
-        _curr_gain_table = new_gain_table;
-    }
-
-    /* Okay, we have to program a new gain table. Sucks, brah. Start the
-     * gain table clock. */
-    _io_iface->poke8(0x137, 0x1A);
-
-    /* IT'S PROGRAMMING TIME. */
-    boost::uint8_t index = 0;
-    for (; index < 77; index++) {
-        _io_iface->poke8(0x130, index);
-        _io_iface->poke8(0x131, gain_table[index][1]);
-        _io_iface->poke8(0x132, gain_table[index][2]);
-        _io_iface->poke8(0x133, gain_table[index][3]);
-        _io_iface->poke8(0x137, 0x1E);
-        _io_iface->poke8(0x134, 0x00);
-        _io_iface->poke8(0x134, 0x00);
-    }
-
-    /* Everything above the 77th index is zero. */
-    for (; index < 91; index++) {
-        _io_iface->poke8(0x130, index);
-        _io_iface->poke8(0x131, 0x00);
-        _io_iface->poke8(0x132, 0x00);
-        _io_iface->poke8(0x133, 0x00);
-        _io_iface->poke8(0x137, 0x1E);
-        _io_iface->poke8(0x134, 0x00);
-        _io_iface->poke8(0x134, 0x00);
-    }
-
-    /* Clear the write bit and stop the gain clock. */
-    _io_iface->poke8(0x137, 0x1A);
-    _io_iface->poke8(0x134, 0x00);
-    _io_iface->poke8(0x134, 0x00);
-    _io_iface->poke8(0x137, 0x00);
-}
-
-/* Setup gain control registers.
- *
- * This really only needs to be done once, at initialization. */
-void ad9361_device_t::_setup_gain_control()
-{
-    _io_iface->poke8(0x0FA, 0xE0); // Gain Control Mode Select
-    _io_iface->poke8(0x0FB, 0x08); // Table, Digital Gain, Man Gain Ctrl
-    _io_iface->poke8(0x0FC, 0x23); // Incr Step Size, ADC Overrange Size
-    _io_iface->poke8(0x0FD, 0x4C); // Max Full/LMT Gain Table Index
-    _io_iface->poke8(0x0FE, 0x44); // Decr Step Size, Peak Overload Time
-    _io_iface->poke8(0x100, 0x6F); // Max Digital Gain
-    _io_iface->poke8(0x104, 0x2F); // ADC Small Overload Threshold
-    _io_iface->poke8(0x105, 0x3A); // ADC Large Overload Threshold
-    _io_iface->poke8(0x107, 0x31); // Large LMT Overload Threshold
-    _io_iface->poke8(0x108, 0x39); // Small LMT Overload Threshold
-    _io_iface->poke8(0x109, 0x23); // Rx1 Full/LMT Gain Index
-    _io_iface->poke8(0x10A, 0x58); // Rx1 LPF Gain Index
-    _io_iface->poke8(0x10B, 0x00); // Rx1 Digital Gain Index
-    _io_iface->poke8(0x10C, 0x23); // Rx2 Full/LMT Gain Index
-    _io_iface->poke8(0x10D, 0x18); // Rx2 LPF Gain Index
-    _io_iface->poke8(0x10E, 0x00); // Rx2 Digital Gain Index
-    _io_iface->poke8(0x114, 0x30); // Low Power Threshold
-    _io_iface->poke8(0x11A, 0x27); // Initial LMT Gain Limit
-    _io_iface->poke8(0x081, 0x00); // Tx Symbol Gain Control
-}
-
-/* Setup the RX or TX synthesizers.
- *
- * This setup depends on a fixed look-up table, which is stored in an
- * included header file. The table is indexed based on the passed VCO rate.
- */
-void ad9361_device_t::_setup_synth(direction_t direction, double vcorate)
-{
-    /* The vcorates in the vco_index array represent lower boundaries for
-     * rates. Once we find a match, we use that index to look-up the rest of
-     * the register values in the LUT. */
-    int vcoindex = 0;
-    for (size_t i = 0; i < 53; i++) {
-        vcoindex = i;
-        if (vcorate > vco_index[i]) {
-            break;
-        }
-    }
-    if (vcoindex > 53)
-        throw uhd::runtime_error("[ad9361_device_t] vcoindex > 53");
-
-    /* Parse the values out of the LUT based on our calculated index... */
-    boost::uint8_t vco_output_level = synth_cal_lut[vcoindex][0];
-    boost::uint8_t vco_varactor = synth_cal_lut[vcoindex][1];
-    boost::uint8_t vco_bias_ref = synth_cal_lut[vcoindex][2];
-    boost::uint8_t vco_bias_tcf = synth_cal_lut[vcoindex][3];
-    boost::uint8_t vco_cal_offset = synth_cal_lut[vcoindex][4];
-    boost::uint8_t vco_varactor_ref = synth_cal_lut[vcoindex][5];
-    boost::uint8_t charge_pump_curr = synth_cal_lut[vcoindex][6];
-    boost::uint8_t loop_filter_c2 = synth_cal_lut[vcoindex][7];
-    boost::uint8_t loop_filter_c1 = synth_cal_lut[vcoindex][8];
-    boost::uint8_t loop_filter_r1 = synth_cal_lut[vcoindex][9];
-    boost::uint8_t loop_filter_c3 = synth_cal_lut[vcoindex][10];
-    boost::uint8_t loop_filter_r3 = synth_cal_lut[vcoindex][11];
-
-    /* ... annnd program! */
-    if (direction == RX) {
-        _io_iface->poke8(0x23a, 0x40 | vco_output_level);
-        _io_iface->poke8(0x239, 0xC0 | vco_varactor);
-        _io_iface->poke8(0x242, vco_bias_ref | (vco_bias_tcf << 3));
-        _io_iface->poke8(0x238, (vco_cal_offset << 3));
-        _io_iface->poke8(0x245, 0x00);
-        _io_iface->poke8(0x251, vco_varactor_ref);
-        _io_iface->poke8(0x250, 0x70);
-        _io_iface->poke8(0x23b, 0x80 | charge_pump_curr);
-        _io_iface->poke8(0x23e, loop_filter_c1 | (loop_filter_c2 << 4));
-        _io_iface->poke8(0x23f, loop_filter_c3 | (loop_filter_r1 << 4));
-        _io_iface->poke8(0x240, loop_filter_r3);
-    } else if (direction == TX) {
-        _io_iface->poke8(0x27a, 0x40 | vco_output_level);
-        _io_iface->poke8(0x279, 0xC0 | vco_varactor);
-        _io_iface->poke8(0x282, vco_bias_ref | (vco_bias_tcf << 3));
-        _io_iface->poke8(0x278, (vco_cal_offset << 3));
-        _io_iface->poke8(0x285, 0x00);
-        _io_iface->poke8(0x291, vco_varactor_ref);
-        _io_iface->poke8(0x290, 0x70);
-        _io_iface->poke8(0x27b, 0x80 | charge_pump_curr);
-        _io_iface->poke8(0x27e, loop_filter_c1 | (loop_filter_c2 << 4));
-        _io_iface->poke8(0x27f, loop_filter_c3 | (loop_filter_r1 << 4));
-        _io_iface->poke8(0x280, loop_filter_r3);
-    } else {
-        throw uhd::runtime_error("[ad9361_device_t] [_setup_synth] INVALID_CODE_PATH");
-    }
-}
-
-
-/* Tune the baseband VCO.
- *
- * This clock signal is what gets fed to the ADCs and DACs. This function is
- * not exported outside of this file, and is invoked based on the rate
- * fed to the public set_clock_rate function. */
-double ad9361_device_t::_tune_bbvco(const double rate)
-{
-    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] rate=%.10f\n") % rate;
-
-    /* Let's not re-tune to the same frequency over and over... */
-    if (freq_is_nearly_equal(rate, _req_coreclk)) {
-        return _adcclock_freq;
-    }
-
-    _req_coreclk = rate;
-
-    const double fref = 40e6;
-    const int modulus = 2088960;
-    const double vcomax = 1430e6;
-    const double vcomin = 672e6;
-    double vcorate;
-    int vcodiv;
-
-    /* Iterate over VCO dividers until appropriate divider is found. */
-    int i = 1;
-    for (; i <= 6; i++) {
-        vcodiv = 1 << i;
-        vcorate = rate * vcodiv;
-
-        if (vcorate >= vcomin && vcorate <= vcomax)
-            break;
-    }
-    if (i == 7)
-        throw uhd::runtime_error("[ad9361_device_t] _tune_bbvco: wrong vcorate");
-
-    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] vcodiv=%d vcorate=%.10f\n") % vcodiv % vcorate;
-    /* Fo = Fref * (Nint + Nfrac / mod) */
-    int nint = vcorate / fref;
-    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] (nint)=%.10f\n") % (vcorate / fref);
-    int nfrac = lround(((vcorate / fref) - (double) nint) * (double) modulus);
-    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] (nfrac)=%.10f\n") % (((vcorate / fref) - (double) nint) * (double) modulus);
-    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] nint=%d nfrac=%d\n") % nint % nfrac;
-    double actual_vcorate = fref
-            * ((double) nint + ((double) nfrac / (double) modulus));
-
-    /* Scale CP current according to VCO rate */
-    const double icp_baseline = 150e-6;
-    const double freq_baseline = 1280e6;
-    double icp = icp_baseline * (actual_vcorate / freq_baseline);
-    int icp_reg = (icp / 25e-6) - 1;
-
-    _io_iface->poke8(0x045, 0x00);            // REFCLK / 1 to BBPLL
-    _io_iface->poke8(0x046, icp_reg & 0x3F);  // CP current
-    _io_iface->poke8(0x048, 0xe8);            // BBPLL loop filters
-    _io_iface->poke8(0x049, 0x5b);            // BBPLL loop filters
-    _io_iface->poke8(0x04a, 0x35);            // BBPLL loop filters
-
-    _io_iface->poke8(0x04b, 0xe0);
-    _io_iface->poke8(0x04e, 0x10);            // Max accuracy
-
-    _io_iface->poke8(0x043, nfrac & 0xFF);         // Nfrac[7:0]
-    _io_iface->poke8(0x042, (nfrac >> 8) & 0xFF);  // Nfrac[15:8]
-    _io_iface->poke8(0x041, (nfrac >> 16) & 0xFF); // Nfrac[23:16]
-    _io_iface->poke8(0x044, nint);                 // Nint
-
-    _calibrate_lock_bbpll();
-
-    _regs.bbpll = (_regs.bbpll & 0xF8) | i;
-
-    _bbpll_freq = actual_vcorate;
-    _adcclock_freq = (actual_vcorate / vcodiv);
-
-    return _adcclock_freq;
-}
-
-/* This function re-programs all of the gains in the system.
- *
- * Because the gain values match to different gain indices based on the
- * current operating band, this function can be called to update all gain
- * settings to the appropriate index after a re-tune. */
-void ad9361_device_t::_reprogram_gains()
-{
-    set_gain(RX, CHAIN_1,_rx1_gain);
-    set_gain(RX, CHAIN_2,_rx2_gain);
-    set_gain(TX, CHAIN_1,_tx1_gain);
-    set_gain(TX, CHAIN_2,_tx2_gain);
-}
-
-/* This is the internal tune function, not available for a host call.
- *
- * Calculate the VCO settings for the requested frquency, and then either
- * tune the RX or TX VCO. */
-double ad9361_device_t::_tune_helper(direction_t direction, const double value)
-{
-    /* The RFPLL runs from 6 GHz - 12 GHz */
-    const double fref = 80e6;
-    const int modulus = 8388593;
-    const double vcomax = 12e9;
-    const double vcomin = 6e9;
-    double vcorate;
-    int vcodiv;
-
-    /* Iterate over VCO dividers until appropriate divider is found. */
-    int i;
-    for (i = 0; i <= 6; i++) {
-        vcodiv = 2 << i;
-        vcorate = value * vcodiv;
-        if (vcorate >= vcomin && vcorate <= vcomax)
-            break;
-    }
-    if (i == 7)
-        throw uhd::runtime_error("[ad9361_device_t] RFVCO can't find valid VCO rate!");
-
-    int nint = vcorate / fref;
-    int nfrac = ((vcorate / fref) - nint) * modulus;
-
-    double actual_vcorate = fref * (nint + (double) (nfrac) / modulus);
-    double actual_lo = actual_vcorate / vcodiv;
-
-    if (direction == RX) {
-
-        _req_rx_freq = value;
-
-        /* Set band-specific settings. */
-        if (value < _client_params->get_band_edge(AD9361_RX_BAND0)) {
-            _regs.inputsel = (_regs.inputsel & 0xC0) | 0x30;
-        } else if ((value
-                >= _client_params->get_band_edge(AD9361_RX_BAND0))
-                && (value
-                        < _client_params->get_band_edge(AD9361_RX_BAND1))) {
-            _regs.inputsel = (_regs.inputsel & 0xC0) | 0x0C;
-        } else if ((value
-                >= _client_params->get_band_edge(AD9361_RX_BAND1))
-                && (value <= 6e9)) {
-            _regs.inputsel = (_regs.inputsel & 0xC0) | 0x03;
-        } else {
-            throw uhd::runtime_error("[ad9361_device_t] [_tune_helper] INVALID_CODE_PATH");
-        }
-
-        _io_iface->poke8(0x004, _regs.inputsel);
-
-        /* Store vcodiv setting. */
-        _regs.vcodivs = (_regs.vcodivs & 0xF0) | (i & 0x0F);
-
-        /* Setup the synthesizer. */
-        _setup_synth(RX, actual_vcorate);
-
-        /* Tune!!!! */
-        _io_iface->poke8(0x233, nfrac & 0xFF);
-        _io_iface->poke8(0x234, (nfrac >> 8) & 0xFF);
-        _io_iface->poke8(0x235, (nfrac >> 16) & 0xFF);
-        _io_iface->poke8(0x232, (nint >> 8) & 0xFF);
-        _io_iface->poke8(0x231, nint & 0xFF);
-        _io_iface->poke8(0x005, _regs.vcodivs);
-
-        /* Lock the PLL! */
-        boost::this_thread::sleep(boost::posix_time::milliseconds(2));
-        if ((_io_iface->peek8(0x247) & 0x02) == 0) {
-            throw uhd::runtime_error("[ad9361_device_t] RX PLL NOT LOCKED");
-        }
-
-        _rx_freq = actual_lo;
-
-        return actual_lo;
-
-    } else {
-
-        _req_tx_freq = value;
-
-        /* Set band-specific settings. */
-        if (value < _client_params->get_band_edge(AD9361_TX_BAND0)) {
-            _regs.inputsel = _regs.inputsel | 0x40;
-        } else if ((value
-                >= _client_params->get_band_edge(AD9361_TX_BAND0))
-                && (value <= 6e9)) {
-            _regs.inputsel = _regs.inputsel & 0xBF;
-        } else {
-            throw uhd::runtime_error("[ad9361_device_t] [_tune_helper] INVALID_CODE_PATH");
-        }
-
-        _io_iface->poke8(0x004, _regs.inputsel);
-
-        /* Store vcodiv setting. */
-        _regs.vcodivs = (_regs.vcodivs & 0x0F) | ((i & 0x0F) << 4);
-
-        /* Setup the synthesizer. */
-        _setup_synth(TX, actual_vcorate);
-
-        /* Tune it, homey. */
-        _io_iface->poke8(0x273, nfrac & 0xFF);
-        _io_iface->poke8(0x274, (nfrac >> 8) & 0xFF);
-        _io_iface->poke8(0x275, (nfrac >> 16) & 0xFF);
-        _io_iface->poke8(0x272, (nint >> 8) & 0xFF);
-        _io_iface->poke8(0x271, nint & 0xFF);
-        _io_iface->poke8(0x005, _regs.vcodivs);
-
-        /* Lock the PLL! */
-        boost::this_thread::sleep(boost::posix_time::milliseconds(2));
-        if ((_io_iface->peek8(0x287) & 0x02) == 0) {
-            throw uhd::runtime_error("[ad9361_device_t] TX PLL NOT LOCKED");
-        }
-
-        _tx_freq = actual_lo;
-
-        return actual_lo;
-    }
-}
-
-/* Configure the various clock / sample rates in the RX and TX chains.
- *
- * Functionally, this function configures AD9361's RX and TX rates. For
- * a requested TX & RX rate, it sets the interpolation & decimation filters,
- * and tunes the VCO that feeds the ADCs and DACs.
- */
-double ad9361_device_t::_setup_rates(const double rate)
-{
-    /* If we make it into this function, then we are tuning to a new rate.
-     * Store the new rate. */
-    _req_clock_rate = rate;
-
-    /* Set the decimation and interpolation values in the RX and TX chains.
-     * This also switches filters in / out. Note that all transmitters and
-     * receivers have to be turned on for the calibration portion of
-     * bring-up, and then they will be switched out to reflect the actual
-     * user-requested antenna selections. */
-    int divfactor = 0;
-    _tfir_factor = 0;
-    if (rate < 0.33e6) {
-        // RX1 + RX2 enabled, 3, 2, 2, 4
-        _regs.rxfilt = B8(11101111);
-
-        // TX1 + TX2 enabled, 3, 2, 2, 4
-        _regs.txfilt = B8(11101111);
-
-        divfactor = 48;
-        _tfir_factor = 2;
-    } else if (rate < 0.66e6) {
-        // RX1 + RX2 enabled, 2, 2, 2, 4
-        _regs.rxfilt = B8(11011111);
-
-        // TX1 + TX2 enabled, 2, 2, 2, 4
-        _regs.txfilt = B8(11011111);
-
-        divfactor = 32;
-        _tfir_factor = 2;
-    } else if (rate <= 20e6) {
-        // RX1 + RX2 enabled, 2, 2, 2, 2
-        _regs.rxfilt = B8(11011110);
-
-        // TX1 + TX2 enabled, 2, 2, 2, 2
-        _regs.txfilt = B8(11011110);
-
-        divfactor = 16;
-        _tfir_factor = 2;
-    } else if ((rate > 20e6) && (rate < 23e6)) {
-        // RX1 + RX2 enabled, 3, 2, 2, 2
-        _regs.rxfilt = B8(11101110);
-
-        // TX1 + TX2 enabled, 3, 1, 2, 2
-        _regs.txfilt = B8(11100110);
-
-        divfactor = 24;
-        _tfir_factor = 2;
-    } else if ((rate >= 23e6) && (rate < 41e6)) {
-        // RX1 + RX2 enabled, 2, 2, 2, 2
-        _regs.rxfilt = B8(11011110);
-
-        // TX1 + TX2 enabled, 1, 2, 2, 2
-        _regs.txfilt = B8(11001110);
-
-        divfactor = 16;
-        _tfir_factor = 2;
-    } else if ((rate >= 41e6) && (rate <= 56e6)) {
-        // RX1 + RX2 enabled, 3, 1, 2, 2
-        _regs.rxfilt = B8(11100110);
-
-        // TX1 + TX2 enabled, 3, 1, 1, 2
-        _regs.txfilt = B8(11100010);
-
-        divfactor = 12;
-        _tfir_factor = 2;
-    } else if ((rate > 56e6) && (rate <= 61.44e6)) {
-        // RX1 + RX2 enabled, 3, 1, 1, 2
-        _regs.rxfilt = B8(11100010);
-
-        // TX1 + TX2 enabled, 3, 1, 1, 1
-        _regs.txfilt = B8(11100001);
-
-        divfactor = 6;
-        _tfir_factor = 1;
-    } else {
-        // should never get in here
-        throw uhd::runtime_error("[ad9361_device_t] [_setup_rates] INVALID_CODE_PATH");
-    }
-
-    UHD_LOG << boost::format("[ad9361_device_t::_setup_rates] divfactor=%d\n") % divfactor;
-
-    /* Tune the BBPLL to get the ADC and DAC clocks. */
-    const double adcclk = _tune_bbvco(rate * divfactor);
-    double dacclk = adcclk;
-
-    /* The DAC clock must be <= 336e6, and is either the ADC clock or 1/2 the
-     * ADC clock.*/
-    if (adcclk > 336e6) {
-        /* Make the DAC clock = ADC/2, and bypass the TXFIR. */
-        _regs.bbpll = _regs.bbpll | 0x08;
-        dacclk = adcclk / 2.0;
-    } else {
-        _regs.bbpll = _regs.bbpll & 0xF7;
-    }
-
-    /* Set the dividers / interpolators in AD9361. */
-    _io_iface->poke8(0x002, _regs.txfilt);
-    _io_iface->poke8(0x003, _regs.rxfilt);
-    _io_iface->poke8(0x004, _regs.inputsel);
-    _io_iface->poke8(0x00A, _regs.bbpll);
-
-    UHD_LOG << boost::format("[ad9361_device_t::_setup_rates] adcclk=%f\n") % adcclk;
-    _baseband_bw = (adcclk / divfactor);
-
-    /*
-     The Tx & Rx FIR calculate 16 taps per clock cycle. This limits the number of available taps to the ratio of DAC_CLK/ADC_CLK
-     to the input data rate multiplied by 16. For example, if the input data rate is 25 MHz and DAC_CLK is 100 MHz,
-     then the ratio of DAC_CLK to the input data rate is 100/25 or 4. In this scenario, the total number of taps available is 64.
-
-     Also, whilst the Rx FIR filter always has memory available for 128 taps, the Tx FIR Filter can only support a maximum length of 64 taps
-     in 1x interpolation mode, and 128 taps in 2x & 4x modes.
-     */
-    const size_t max_tx_taps = std::min<size_t>(
-            std::min<size_t>((16 * (int)((dacclk / rate) + 0.5)), 128),
-            (_tfir_factor == 1) ? 64 : 128);
-    const size_t max_rx_taps = std::min<size_t>((16 * (size_t)((adcclk / rate) + 0.5)),
-            128);
-
-    const size_t num_tx_taps = get_num_taps(max_tx_taps);
-    const size_t num_rx_taps = get_num_taps(max_rx_taps);
-
-    _setup_tx_fir(num_tx_taps);
-    _setup_rx_fir(num_rx_taps);
-
-    return _baseband_bw;
-}
-
-/***********************************************************************
- * Publicly exported functions to host calls
- **********************************************************************/
-void ad9361_device_t::initialize()
-{
-    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
-
-    /* Initialize shadow registers. */
-    _regs.vcodivs = 0x00;
-    _regs.inputsel = 0x30;
-    _regs.rxfilt = 0x00;
-    _regs.txfilt = 0x00;
-    _regs.bbpll = 0x02;
-    _regs.bbftune_config = 0x1e;
-    _regs.bbftune_mode = 0x1e;
-
-    /* Initialize private VRQ fields. */
-    _rx_freq = 0.0;
-    _tx_freq = 0.0;
-    _req_rx_freq = 0.0;
-    _req_tx_freq = 0.0;
-    _baseband_bw = 0.0;
-    _req_clock_rate = 0.0;
-    _req_coreclk = 0.0;
-    _bbpll_freq = 0.0;
-    _adcclock_freq = 0.0;
-    _rx_bbf_tunediv = 0;
-    _curr_gain_table = 0;
-    _rx1_gain = 0;
-    _rx2_gain = 0;
-    _tx1_gain = 0;
-    _tx2_gain = 0;
-
-    /* Reset the device. */
-    _io_iface->poke8(0x000, 0x01);
-    _io_iface->poke8(0x000, 0x00);
-    boost::this_thread::sleep(boost::posix_time::milliseconds(20));
-
-    /* There is not a WAT big enough for this. */
-    _io_iface->poke8(0x3df, 0x01);
-
-    _io_iface->poke8(0x2a6, 0x0e); // Enable master bias
-    _io_iface->poke8(0x2a8, 0x0e); // Set bandgap trim
-
-    /* Set RFPLL ref clock scale to REFCLK * 2 */
-    _io_iface->poke8(0x2ab, 0x07);
-    _io_iface->poke8(0x2ac, 0xff);
-
-    /* Enable clocks. */
-    switch (_client_params->get_clocking_mode()) {
-    case AD9361_XTAL_N_CLK_PATH: {
-        _io_iface->poke8(0x009, 0x17);
-    } break;
-
-    case AD9361_XTAL_P_CLK_PATH: {
-        _io_iface->poke8(0x009, 0x07);
-        _io_iface->poke8(0x292, 0x08);
-        _io_iface->poke8(0x293, 0x80);
-        _io_iface->poke8(0x294, 0x00);
-        _io_iface->poke8(0x295, 0x14);
-    } break;
-
-    default:
-        throw uhd::runtime_error("[ad9361_device_t] NOT IMPLEMENTED");
-    }
-    boost::this_thread::sleep(boost::posix_time::milliseconds(20));
-
-    /* Tune the BBPLL, write TX and RX FIRS. */
-    _setup_rates(50e6);
-
-    /* Setup data ports (FDD dual port DDR):
-     *      FDD dual port DDR CMOS no swap.
-     *      Force TX on one port, RX on the other. */
-    switch (_client_params->get_digital_interface_mode()) {
-    case AD9361_DDR_FDD_LVCMOS: {
-        _io_iface->poke8(0x010, 0xc8);
-        _io_iface->poke8(0x011, 0x00);
-        _io_iface->poke8(0x012, 0x02);
-    } break;
-
-    case AD9361_DDR_FDD_LVDS: {
-        _io_iface->poke8(0x010, 0xcc);
-        _io_iface->poke8(0x011, 0x00);
-        _io_iface->poke8(0x012, 0x10);
-
-        //LVDS Specific
-        _io_iface->poke8(0x03C, 0x23);
-        _io_iface->poke8(0x03D, 0xFF);
-        _io_iface->poke8(0x03E, 0x0F);
-    } break;
-
-    default:
-        throw uhd::runtime_error("[ad9361_device_t] NOT IMPLEMENTED");
-    }
-
-    /* Data delay for TX and RX data clocks */
-    digital_interface_delays_t timing =
-            _client_params->get_digital_interface_timing();
-    boost::uint8_t rx_delays = ((timing.rx_clk_delay & 0xF) << 4)
-            | (timing.rx_data_delay & 0xF);
-    boost::uint8_t tx_delays = ((timing.tx_clk_delay & 0xF) << 4)
-            | (timing.tx_data_delay & 0xF);
-    _io_iface->poke8(0x006, rx_delays);
-    _io_iface->poke8(0x007, tx_delays);
-
-    /* Setup AuxDAC */
-    _io_iface->poke8(0x018, 0x00); // AuxDAC1 Word[9:2]
-    _io_iface->poke8(0x019, 0x00); // AuxDAC2 Word[9:2]
-    _io_iface->poke8(0x01A, 0x00); // AuxDAC1 Config and Word[1:0]
-    _io_iface->poke8(0x01B, 0x00); // AuxDAC2 Config and Word[1:0]
-    _io_iface->poke8(0x022, 0x4A); // Invert Bypassed LNA
-    _io_iface->poke8(0x023, 0xFF); // AuxDAC Manaul/Auto Control
-    _io_iface->poke8(0x026, 0x00); // AuxDAC Manual Select Bit/GPO Manual Select
-    _io_iface->poke8(0x030, 0x00); // AuxDAC1 Rx Delay
-    _io_iface->poke8(0x031, 0x00); // AuxDAC1 Tx Delay
-    _io_iface->poke8(0x032, 0x00); // AuxDAC2 Rx Delay
-    _io_iface->poke8(0x033, 0x00); // AuxDAC2 Tx Delay
-
-    /* Setup AuxADC */
-    _io_iface->poke8(0x00B, 0x00); // Temp Sensor Setup (Offset)
-    _io_iface->poke8(0x00C, 0x00); // Temp Sensor Setup (Temp Window)
-    _io_iface->poke8(0x00D, 0x03); // Temp Sensor Setup (Periodic Measure)
-    _io_iface->poke8(0x00F, 0x04); // Temp Sensor Setup (Decimation)
-    _io_iface->poke8(0x01C, 0x10); // AuxADC Setup (Clock Div)
-    _io_iface->poke8(0x01D, 0x01); // AuxADC Setup (Decimation/Enable)
-
-    /* Setup control outputs. */
-    _io_iface->poke8(0x035, 0x07);
-    _io_iface->poke8(0x036, 0xFF);
-
-    /* Setup GPO */
-    _io_iface->poke8(0x03a, 0x27); //set delay register
-    _io_iface->poke8(0x020, 0x00); // GPO Auto Enable Setup in RX and TX
-    _io_iface->poke8(0x027, 0x03); // GPO Manual and GPO auto value in ALERT
-    _io_iface->poke8(0x028, 0x00); // GPO_0 RX Delay
-    _io_iface->poke8(0x029, 0x00); // GPO_1 RX Delay
-    _io_iface->poke8(0x02A, 0x00); // GPO_2 RX Delay
-    _io_iface->poke8(0x02B, 0x00); // GPO_3 RX Delay
-    _io_iface->poke8(0x02C, 0x00); // GPO_0 TX Delay
-    _io_iface->poke8(0x02D, 0x00); // GPO_1 TX Delay
-    _io_iface->poke8(0x02E, 0x00); // GPO_2 TX Delay
-    _io_iface->poke8(0x02F, 0x00); // GPO_3 TX Delay
-
-    _io_iface->poke8(0x261, 0x00); // RX LO power
-    _io_iface->poke8(0x2a1, 0x00); // TX LO power
-    _io_iface->poke8(0x248, 0x0b); // en RX VCO LDO
-    _io_iface->poke8(0x288, 0x0b); // en TX VCO LDO
-    _io_iface->poke8(0x246, 0x02); // pd RX cal Tcf
-    _io_iface->poke8(0x286, 0x02); // pd TX cal Tcf
-    _io_iface->poke8(0x249, 0x8e); // rx vco cal length
-    _io_iface->poke8(0x289, 0x8e); // rx vco cal length
-    _io_iface->poke8(0x23b, 0x80); // set RX MSB?, FIXME 0x89 magic cp
-    _io_iface->poke8(0x27b, 0x80); // "" TX //FIXME 0x88 see above
-    _io_iface->poke8(0x243, 0x0d); // set rx prescaler bias
-    _io_iface->poke8(0x283, 0x0d); // "" TX
-
-    _io_iface->poke8(0x23d, 0x00); // Clear half VCO cal clock setting
-    _io_iface->poke8(0x27d, 0x00); // Clear half VCO cal clock setting
-
-    /* The order of the following process is EXTREMELY important. If the
-     * below functions are modified at all, device initialization and
-     * calibration might be broken in the process! */
-
-    _io_iface->poke8(0x015, 0x04); // dual synth mode, synth en ctrl en
-    _io_iface->poke8(0x014, 0x05); // use SPI for TXNRX ctrl, to ALERT, TX on
-    _io_iface->poke8(0x013, 0x01); // enable ENSM
-    boost::this_thread::sleep(boost::posix_time::milliseconds(1));
-
-    _calibrate_synth_charge_pumps();
-
-    _tune_helper(RX, 800e6);
-    _tune_helper(TX, 850e6);
-
-    _program_mixer_gm_subtable();
-    _program_gain_table();
-    _setup_gain_control();
-
-    _calibrate_baseband_rx_analog_filter();
-    _calibrate_baseband_tx_analog_filter();
-    _calibrate_rx_TIAs();
-    _calibrate_secondary_tx_filter();
-
-    _setup_adc();
-
-    _calibrate_tx_quadrature();
-    _calibrate_rx_quadrature();
-
-    // cals done, set PPORT config
-    switch (_client_params->get_digital_interface_mode()) {
-    case AD9361_DDR_FDD_LVCMOS: {
-        _io_iface->poke8(0x012, 0x02);
-    } break;
-
-    case AD9361_DDR_FDD_LVDS: {
-        _io_iface->poke8(0x012, 0x10);
-    } break;
-
-    default:
-        throw uhd::runtime_error("[ad9361_device_t] NOT IMPLEMENTED");
-    }
-
-    _io_iface->poke8(0x013, 0x01); // Set ENSM FDD bit
-    _io_iface->poke8(0x015, 0x04); // dual synth mode, synth en ctrl en
-
-    /* Default TX attentuation to 10dB on both TX1 and TX2 */
-    _io_iface->poke8(0x073, 0x00);
-    _io_iface->poke8(0x074, 0x00);
-    _io_iface->poke8(0x075, 0x00);
-    _io_iface->poke8(0x076, 0x00);
-
-    /* Setup RSSI Measurements */
-    _io_iface->poke8(0x150, 0x0E); // RSSI Measurement Duration 0, 1
-    _io_iface->poke8(0x151, 0x00); // RSSI Measurement Duration 2, 3
-    _io_iface->poke8(0x152, 0xFF); // RSSI Weighted Multiplier 0
-    _io_iface->poke8(0x153, 0x00); // RSSI Weighted Multiplier 1
-    _io_iface->poke8(0x154, 0x00); // RSSI Weighted Multiplier 2
-    _io_iface->poke8(0x155, 0x00); // RSSI Weighted Multiplier 3
-    _io_iface->poke8(0x156, 0x00); // RSSI Delay
-    _io_iface->poke8(0x157, 0x00); // RSSI Wait
-    _io_iface->poke8(0x158, 0x0D); // RSSI Mode Select
-    _io_iface->poke8(0x15C, 0x67); // Power Measurement Duration
-
-    /* Turn on the default RX & TX chains. */
-    set_active_chains(true, false, false, false);
-
-    /* Set TXers & RXers on (only works in FDD mode) */
-    _io_iface->poke8(0x014, 0x21);
-}
-
-
-/* This function sets the RX / TX rate between AD9361 and the FPGA, and
- * thus determines the interpolation / decimation required in the FPGA to
- * achieve the user's requested rate.
- *
- * This is the only clock setting function that is exposed to the outside. */
-double ad9361_device_t::set_clock_rate(const double req_rate)
-{
-    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
-
-    if (req_rate > 61.44e6) {
-        throw uhd::runtime_error("[ad9361_device_t] Requested master clock rate outside range");
-    }
-
-    UHD_LOG << boost::format("[ad9361_device_t::set_clock_rate] req_rate=%.10f\n") % req_rate;
-
-    /* UHD has a habit of requesting the same rate like four times when it
-     * starts up. This prevents that, and any bugs in user code that request
-     * the same rate over and over. */
-    if (freq_is_nearly_equal(req_rate, _req_clock_rate)) {
-        return _baseband_bw;
-    }
-
-    /* We must be in the SLEEP / WAIT state to do this. If we aren't already
-     * there, transition the ENSM to State 0. */
-    boost::uint8_t current_state = _io_iface->peek8(0x017) & 0x0F;
-    switch (current_state) {
-    case 0x05:
-        /* We are in the ALERT state. */
-        _io_iface->poke8(0x014, 0x21);
-        boost::this_thread::sleep(boost::posix_time::milliseconds(5));
-        _io_iface->poke8(0x014, 0x00);
-        break;
-
-    case 0x0A:
-        /* We are in the FDD state. */
-        _io_iface->poke8(0x014, 0x00);
-        break;
-
-    default:
-        throw uhd::runtime_error("[ad9361_device_t] [set_clock_rate:1] AD9361 in unknown state");
-        break;
-    };
-
-    /* Store the current chain / antenna selections so that we can restore
-     * them at the end of this routine; all chains will be enabled from
-     * within setup_rates for calibration purposes. */
-    boost::uint8_t orig_tx_chains = _regs.txfilt & 0xC0;
-    boost::uint8_t orig_rx_chains = _regs.rxfilt & 0xC0;
-
-    /* Call into the clock configuration / settings function. This is where
-     * all the hard work gets done. */
-    double rate = _setup_rates(req_rate);
-
-    UHD_LOG << boost::format("[ad9361_device_t::set_clock_rate] rate=%.10f\n") % rate;
-
-    /* Transition to the ALERT state and calibrate everything. */
-    _io_iface->poke8(0x015, 0x04); //dual synth mode, synth en ctrl en
-    _io_iface->poke8(0x014, 0x05); //use SPI for TXNRX ctrl, to ALERT, TX on
-    _io_iface->poke8(0x013, 0x01); //enable ENSM
-    boost::this_thread::sleep(boost::posix_time::milliseconds(1));
-
-    _calibrate_synth_charge_pumps();
-
-    _tune_helper(RX, _rx_freq);
-    _tune_helper(TX, _tx_freq);
-
-    _program_mixer_gm_subtable();
-    _program_gain_table();
-    _setup_gain_control();
-    _reprogram_gains();
-
-    _calibrate_baseband_rx_analog_filter();
-    _calibrate_baseband_tx_analog_filter();
-    _calibrate_rx_TIAs();
-    _calibrate_secondary_tx_filter();
-
-    _setup_adc();
-
-    _calibrate_tx_quadrature();
-    _calibrate_rx_quadrature();
-
-    // cals done, set PPORT config
-    switch (_client_params->get_digital_interface_mode()) {
-        case AD9361_DDR_FDD_LVCMOS: {
-            _io_iface->poke8(0x012, 0x02);
-        }break;
-
-        case AD9361_DDR_FDD_LVDS: {
-            _io_iface->poke8(0x012, 0x10);
-        }break;
-
-        default:
-        throw uhd::runtime_error("[ad9361_device_t] NOT IMPLEMENTED");
-    }
-    _io_iface->poke8(0x013, 0x01); // Set ENSM FDD bit
-    _io_iface->poke8(0x015, 0x04); // dual synth mode, synth en ctrl en
-
-    /* End the function in the same state as the entry state. */
-    switch (current_state) {
-    case 0x05:
-        /* We are already in ALERT. */
-        break;
-
-    case 0x0A:
-        /* Transition back to FDD, and restore the original antenna
-         * / chain selections. */
-        _regs.txfilt = (_regs.txfilt & 0x3F) | orig_tx_chains;
-        _regs.rxfilt = (_regs.rxfilt & 0x3F) | orig_rx_chains;
-
-        _io_iface->poke8(0x002, _regs.txfilt);
-        _io_iface->poke8(0x003, _regs.rxfilt);
-        _io_iface->poke8(0x014, 0x21);
-        break;
-
-    default:
-        throw uhd::runtime_error("[ad9361_device_t] [set_clock_rate:2] AD9361 in unknown state");
-        break;
-    };
-
-    return rate;
-}
-
-
-/* Set which of the four TX / RX chains provided by AD9361 are active.
- *
- * AD9361 provides two sets of chains, Side A and Side B. Each side
- * provides one TX antenna, and one RX antenna. The B200 maintains the USRP
- * standard of providing one antenna connection that is both TX & RX, and
- * one that is RX-only - for each chain. Thus, the possible antenna and
- * chain selections are:
- *
- *  B200 Antenna    AD9361 Side       AD9361 Chain
- *  -------------------------------------------------------------------
- *  TX / RX1        Side A              TX1 (when switched to TX)
- *  TX / RX1        Side A              RX1 (when switched to RX)
- *  RX1             Side A              RX1
- *
- *  TX / RX2        Side B              TX2 (when switched to TX)
- *  TX / RX2        Side B              RX2 (when switched to RX)
- *  RX2             Side B              RX2
- */
-void ad9361_device_t::set_active_chains(bool tx1, bool tx2, bool rx1, bool rx2)
-{
-    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
-
-    /* Clear out the current active chain settings. */
-    _regs.txfilt = _regs.txfilt & 0x3F;
-    _regs.rxfilt = _regs.rxfilt & 0x3F;
-
-    /* Turn on the different chains based on the passed parameters. */
-    if (tx1) {
-        _regs.txfilt = _regs.txfilt | 0x40;
-    }
-    if (tx2) {
-        _regs.txfilt = _regs.txfilt | 0x80;
-    }
-    if (rx1) {
-        _regs.rxfilt = _regs.rxfilt | 0x40;
-    }
-    if (rx2) {
-        _regs.rxfilt = _regs.rxfilt | 0x80;
-    }
-
-    /* Check for FDD state */
-    boost::uint8_t set_back_to_fdd = 0;
-    boost::uint8_t ensm_state = _io_iface->peek8(0x017) & 0x0F;
-    if (ensm_state == 0xA)   // FDD
-            {
-        /* Put into ALERT state (via the FDD flush state). */
-        _io_iface->poke8(0x014, 0x01);
-        set_back_to_fdd = 1;
-    }
-
-    /* Wait for FDD flush state to complete (if necessary) */
-    while (ensm_state == 0xA || ensm_state == 0xB)
-        ensm_state = _io_iface->peek8(0x017) & 0x0F;
-
-    /* Turn on / off the chains. */
-    _io_iface->poke8(0x002, _regs.txfilt);
-    _io_iface->poke8(0x003, _regs.rxfilt);
-
-    /* Put back into FDD state if necessary */
-    if (set_back_to_fdd)
-        _io_iface->poke8(0x014, 0x21);
-}
-
-/* Tune the RX or TX frequency.
- *
- * This is the publicly-accessible tune function. It makes sure the tune
- * isn't a redundant request, and if not, passes it on to the class's
- * internal tune function.
- *
- * After tuning, it runs any appropriate calibrations. */
-double ad9361_device_t::tune(direction_t direction, const double value)
-{
-    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
-
-    if (direction == RX) {
-        if (freq_is_nearly_equal(value, _req_rx_freq)) {
-            return _rx_freq;
-        }
-
-    } else if (direction == TX) {
-        if (freq_is_nearly_equal(value, _req_tx_freq)) {
-            return _tx_freq;
-        }
-
-    } else {
-        throw uhd::runtime_error("[ad9361_device_t] [tune] INVALID_CODE_PATH");
-    }
-
-    /* If we aren't already in the ALERT state, we will need to return to
-     * the FDD state after tuning. */
-    int not_in_alert = 0;
-    if ((_io_iface->peek8(0x017) & 0x0F) != 5) {
-        /* Force the device into the ALERT state. */
-        not_in_alert = 1;
-        _io_iface->poke8(0x014, 0x01);
-    }
-
-    /* Tune the RF VCO! */
-    double tune_freq = _tune_helper(direction, value);
-
-    /* Run any necessary calibrations / setups */
-    if (direction == RX) {
-        _program_gain_table();
-    }
-
-    /* Update the gain settings. */
-    _reprogram_gains();
-
-    /* Run the calibration algorithms. */
-    _calibrate_tx_quadrature();
-    _calibrate_rx_quadrature();
-
-    /* If we were in the FDD state, return it now. */
-    if (not_in_alert) {
-        _io_iface->poke8(0x014, 0x21);
-    }
-
-    return tune_freq;
-}
-
-/* Set the gain of RX1, RX2, TX1, or TX2.
- *
- * Note that the 'value' passed to this function is the actual gain value,
- * _not_ the gain index. This is the opposite of the eval software's GUI!
- * Also note that the RX chains are done in terms of gain, and the TX chains
- * are done in terms of attenuation. */
-double ad9361_device_t::set_gain(direction_t direction, chain_t chain, const double value)
-{
-    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
-
-    if (direction == RX) {
-        /* Indexing the gain tables requires an offset from the requested
-         * amount of total gain in dB:
-         *      < 1300MHz: dB + 5
-         *      >= 1300MHz and < 4000MHz: dB + 3
-         *      >= 4000MHz and <= 6000MHz: dB + 14
-         */
-        int gain_offset = 0;
-        if (_rx_freq < 1300e6) {
-            gain_offset = 5;
-        } else if (_rx_freq < 4000e6) {
-            gain_offset = 3;
-        } else {
-            gain_offset = 14;
-        }
-
-        int gain_index = value + gain_offset;
-
-        /* Clip the gain values to the proper min/max gain values. */
-        if (gain_index > 76)
-            gain_index = 76;
-        if (gain_index < 0)
-            gain_index = 0;
-
-        if (chain == CHAIN_1) {
-            _rx1_gain = value;
-            _io_iface->poke8(0x109, gain_index);
-        } else {
-            _rx2_gain = value;
-            _io_iface->poke8(0x10c, gain_index);
-        }
-
-        return gain_index - gain_offset;
-    } else {
-        /* Setting the below bits causes a change in the TX attenuation word
-         * to immediately take effect. */
-        _io_iface->poke8(0x077, 0x40);
-        _io_iface->poke8(0x07c, 0x40);
-
-        /* Each gain step is -0.25dB. Calculate the attenuation necessary
-         * for the requested gain, convert it into gain steps, then write
-         * the attenuation word. Max gain (so zero attenuation) is 89.75. */
-        double atten = AD9361_MAX_GAIN - value;
-        int attenreg = atten * 4;
-        if (chain == CHAIN_1) {
-            _tx1_gain = value;
-            _io_iface->poke8(0x073, attenreg & 0xFF);
-            _io_iface->poke8(0x074, (attenreg >> 8) & 0x01);
-        } else {
-            _tx2_gain = value;
-            _io_iface->poke8(0x075, attenreg & 0xFF);
-            _io_iface->poke8(0x076, (attenreg >> 8) & 0x01);
-        }
-        return AD9361_MAX_GAIN - ((double) (attenreg) / 4);
-    }
-}
-
-void ad9361_device_t::output_test_tone()
-{
-    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
-    /* Output a 480 kHz tone at 800 MHz */
-    _io_iface->poke8(0x3F4, 0x0B);
-    _io_iface->poke8(0x3FC, 0xFF);
-    _io_iface->poke8(0x3FD, 0xFF);
-    _io_iface->poke8(0x3FE, 0x3F);
-}
-
-void ad9361_device_t::data_port_loopback(const bool loopback_enabled)
-{
-    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
-    _io_iface->poke8(0x3F5, (loopback_enabled ? 0x01 : 0x00));
-}
-
-}}
+//
+// Copyright 2014 Ettus Research LLC
+//
+
+#include "ad9361_filter_taps.h"
+#include "ad9361_gain_tables.h"
+#include "ad9361_synth_lut.h"
+#include "ad9361_client.h"
+#include "ad9361_device.h"
+#define _USE_MATH_DEFINES
+#include <cmath>
+#include <uhd/exception.hpp>
+#include <uhd/utils/log.hpp>
+#include <boost/cstdint.hpp>
+#include <boost/date_time/posix_time/posix_time.hpp>
+#include <boost/thread/thread.hpp>
+#include <boost/scoped_array.hpp>
+#include <boost/format.hpp>
+#include <boost/math/special_functions.hpp>
+
+////////////////////////////////////////////////////////////
+// the following macros evaluate to a compile time constant
+// macros By Tom Torfs - donated to the public domain
+
+/* turn a numeric literal into a hex constant
+(avoids problems with leading zeroes)
+8-bit constants max value 0x11111111, always fits in unsigned long
+*/
+#define HEX__(n) 0x##n##LU
+
+/* 8-bit conversion function */
+#define B8__(x) ((x&0x0000000FLU)?1:0) \
++((x&0x000000F0LU)?2:0) \
++((x&0x00000F00LU)?4:0) \
++((x&0x0000F000LU)?8:0) \
++((x&0x000F0000LU)?16:0) \
++((x&0x00F00000LU)?32:0) \
++((x&0x0F000000LU)?64:0) \
++((x&0xF0000000LU)?128:0)
+
+/* for upto 8-bit binary constants */
+#define B8(d) ((unsigned char)B8__(HEX__(d)))
+////////////////////////////////////////////////////////////
+
+
+namespace uhd { namespace usrp {
+
+/* This is a simple comparison for very large double-precision floating
+ * point numbers. It is used to prevent re-tunes for frequencies that are
+ * the same but not 'exactly' because of data precision issues. */
+// TODO: see if we can avoid the need for this function
+int freq_is_nearly_equal(double a, double b) {
+    return std::max(a,b) - std::min(a,b) < 1;
+}
+
+/***********************************************************************
+ * Filter functions
+ **********************************************************************/
+
+/* This function takes in the calculated maximum number of FIR taps, and
+ * returns a number of taps that makes AD9361 happy. */
+int get_num_taps(int max_num_taps) {
+
+    int num_taps = 0;
+    int num_taps_list[] = {16, 32, 48, 64, 80, 96, 112, 128};
+    int i;
+    for(i = 1; i < 8; i++) {
+        if(max_num_taps >= num_taps_list[i]) {
+            continue;
+        } else {
+            num_taps = num_taps_list[i - 1];
+            break;
+        }
+    } if(num_taps == 0) { num_taps = 128; }
+
+    return num_taps;
+}
+
+const double ad9361_device_t::AD9361_MAX_GAIN        = 89.75;
+const double ad9361_device_t::AD9361_MAX_CLOCK_RATE  = 61.44e6;
+
+
+/* Program either the RX or TX FIR filter.
+ *
+ * The process is the same for both filters, but the function must be told
+ * how many taps are in the filter, and given a vector of the taps
+ * themselves.  */
+
+void ad9361_device_t::_program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs)
+{
+    boost::uint16_t base;
+
+    /* RX and TX filters use largely identical sets of programming registers.
+     Select the appropriate bank of registers here. */
+    if (direction == RX) {
+        base = 0x0f0;
+    } else {
+        base = 0x060;
+    }
+
+    /* Encode number of filter taps for programming register */
+    boost::uint8_t reg_numtaps = (((num_taps / 16) - 1) & 0x07) << 5;
+
+    /* Turn on the filter clock. */
+    _io_iface->poke8(base + 5, reg_numtaps | 0x1a);
+    boost::this_thread::sleep(boost::posix_time::milliseconds(1));
+
+    /* Zero the unused taps just in case they have stale data */
+    int addr;
+    for (addr = num_taps; addr < 128; addr++) {
+        _io_iface->poke8(base + 0, addr);
+        _io_iface->poke8(base + 1, 0x0);
+        _io_iface->poke8(base + 2, 0x0);
+        _io_iface->poke8(base + 5, reg_numtaps | 0x1e);
+        _io_iface->poke8(base + 4, 0x00);
+        _io_iface->poke8(base + 4, 0x00);
+    }
+
+    /* Iterate through indirect programming of filter coeffs using ADI recomended procedure */
+    for (addr = 0; addr < num_taps; addr++) {
+        _io_iface->poke8(base + 0, addr);
+        _io_iface->poke8(base + 1, (coeffs[addr]) & 0xff);
+        _io_iface->poke8(base + 2, (coeffs[addr] >> 8) & 0xff);
+        _io_iface->poke8(base + 5, reg_numtaps | 0x1e);
+        _io_iface->poke8(base + 4, 0x00);
+        _io_iface->poke8(base + 4, 0x00);
+    }
+
+    /* UG-671 states (page 25) (paraphrased and clarified):
+     " After the table has been programmed, write to register BASE+5 with the write bit D2 cleared and D1 high.
+     Then, write to register BASE+5 again with D1 clear, thus ensuring that the write bit resets internally
+     before the clock stops. Wait 4 sample clock periods after setting D2 high while that data writes into the table"
+     */
+
+    _io_iface->poke8(base + 5, reg_numtaps | 0x1A);
+    if (direction == RX) {
+        _io_iface->poke8(base + 5, reg_numtaps | 0x18);
+        _io_iface->poke8(base + 6, 0x02); /* Also turn on -6dB Rx gain here, to stop filter overfow.*/
+    } else {
+        _io_iface->poke8(base + 5, reg_numtaps | 0x19); /* Also turn on -6dB Tx gain here, to stop filter overfow.*/
+    }
+}
+
+
+/* Program the RX FIR Filter. */
+void ad9361_device_t::_setup_rx_fir(size_t num_taps)
+{
+    boost::scoped_array<boost::uint16_t> coeffs(new boost::uint16_t[num_taps]);
+    for (size_t i = 0; i < num_taps; i++) {
+        switch (num_taps) {
+        case 128:
+            coeffs[i] = boost::uint16_t(hb127_coeffs[i]);
+            break;
+        case 96:
+            coeffs[i] = boost::uint16_t(hb95_coeffs[i]);
+            break;
+        case 64:
+            coeffs[i] = boost::uint16_t(hb63_coeffs[i]);
+            break;
+        case 48:
+            coeffs[i] = boost::uint16_t(hb47_coeffs[i]);
+            break;
+        default:
+            throw uhd::runtime_error("[ad9361_device_t] Unsupported number of Rx FIR taps.");
+        }
+    }
+
+    _program_fir_filter(RX, num_taps, coeffs.get());
+}
+
+/* Program the TX FIR Filter. */
+void ad9361_device_t::_setup_tx_fir(size_t num_taps)
+{
+    boost::scoped_array<boost::uint16_t> coeffs(new boost::uint16_t[num_taps]);
+    for (size_t i = 0; i < num_taps; i++) {
+        switch (num_taps) {
+        case 128:
+            coeffs[i] = boost::uint16_t(hb127_coeffs[i]);
+            break;
+        case 96:
+            coeffs[i] = boost::uint16_t(hb95_coeffs[i]);
+            break;
+        case 64:
+            coeffs[i] = boost::uint16_t(hb63_coeffs[i]);
+            break;
+        case 48:
+            coeffs[i] = boost::uint16_t(hb47_coeffs[i]);
+            break;
+        default:
+            throw uhd::runtime_error("[ad9361_device_t] Unsupported number of Tx FIR taps.");
+        }
+    }
+
+    _program_fir_filter(TX, num_taps, coeffs.get());
+}
+
+/***********************************************************************
+ * Calibration functions
+ ***********************************************************************/
+
+/* Calibrate and lock the BBPLL.
+ *
+ * This function should be called anytime the BBPLL is tuned. */
+void ad9361_device_t::_calibrate_lock_bbpll()
+{
+    _io_iface->poke8(0x03F, 0x05); // Start the BBPLL calibration
+    _io_iface->poke8(0x03F, 0x01); // Clear the 'start' bit
+
+    /* Increase BBPLL KV and phase margin. */
+    _io_iface->poke8(0x04c, 0x86);
+    _io_iface->poke8(0x04d, 0x01);
+    _io_iface->poke8(0x04d, 0x05);
+
+    /* Wait for BBPLL lock. */
+    size_t count = 0;
+    while (!(_io_iface->peek8(0x05e) & 0x80)) {
+        if (count > 1000) {
+            throw uhd::runtime_error("[ad9361_device_t] BBPLL not locked");
+            break;
+        }
+        count++;
+        boost::this_thread::sleep(boost::posix_time::milliseconds(2));
+    }
+}
+
+/* Calibrate the synthesizer charge pumps.
+ *
+ * Technically, this calibration only needs to be done once, at device
+ * initialization. */
+void ad9361_device_t::_calibrate_synth_charge_pumps()
+{
+    /* If this function ever gets called, and the ENSM isn't already in the
+     * ALERT state, then something has gone horribly wrong. */
+    if ((_io_iface->peek8(0x017) & 0x0F) != 5) {
+        throw uhd::runtime_error("[ad9361_device_t] AD9361 not in ALERT during cal");
+    }
+
+    /* Calibrate the RX synthesizer charge pump. */
+    size_t count = 0;
+    _io_iface->poke8(0x23d, 0x04);
+    while (!(_io_iface->peek8(0x244) & 0x80)) {
+        if (count > 5) {
+            throw uhd::runtime_error("[ad9361_device_t] RX charge pump cal failure");
+            break;
+        }
+        count++;
+        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
+    }
+    _io_iface->poke8(0x23d, 0x00);
+
+    /* Calibrate the TX synthesizer charge pump. */
+    count = 0;
+    _io_iface->poke8(0x27d, 0x04);
+    while (!(_io_iface->peek8(0x284) & 0x80)) {
+        if (count > 5) {
+            throw uhd::runtime_error("[ad9361_device_t] TX charge pump cal failure");
+            break;
+        }
+        count++;
+        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
+    }
+    _io_iface->poke8(0x27d, 0x00);
+}
+
+/* Calibrate the analog BB RX filter.
+ *
+ * Note that the filter calibration depends heavily on the baseband
+ * bandwidth, so this must be re-done after any change to the RX sample
+ * rate. */
+double ad9361_device_t::_calibrate_baseband_rx_analog_filter()
+{
+    /* For filter tuning, baseband BW is half the complex BW, and must be
+     * between 28e6 and 0.2e6. */
+    double bbbw = _baseband_bw / 2.0;
+    if (bbbw > 28e6) {
+        bbbw = 28e6;
+    } else if (bbbw < 0.20e6) {
+        bbbw = 0.20e6;
+    }
+
+    double rxtune_clk = ((1.4 * bbbw * 2 * M_PI) / M_LN2);
+    _rx_bbf_tunediv = std::min<boost::uint16_t>(511, boost::uint16_t(std::ceil(_bbpll_freq / rxtune_clk)));
+    _regs.bbftune_config = (_regs.bbftune_config & 0xFE)
+            | ((_rx_bbf_tunediv >> 8) & 0x0001);
+
+    double bbbw_mhz = bbbw / 1e6;
+    double temp = ((bbbw_mhz - std::floor(bbbw_mhz)) * 1000) / 7.8125;
+    boost::uint8_t bbbw_khz = std::min<boost::uint8_t>(127, boost::uint8_t(std::floor(temp + 0.5)));
+
+    /* Set corner frequencies and dividers. */
+    _io_iface->poke8(0x1fb, (boost::uint8_t) (bbbw_mhz));
+    _io_iface->poke8(0x1fc, bbbw_khz);
+    _io_iface->poke8(0x1f8, (_rx_bbf_tunediv & 0x00FF));
+    _io_iface->poke8(0x1f9, _regs.bbftune_config);
+
+    /* RX Mix Voltage settings - only change with apps engineer help. */
+    _io_iface->poke8(0x1d5, 0x3f);
+    _io_iface->poke8(0x1c0, 0x03);
+
+    /* Enable RX1 & RX2 filter tuners. */
+    _io_iface->poke8(0x1e2, 0x02);
+    _io_iface->poke8(0x1e3, 0x02);
+
+    /* Run the calibration! */
+    size_t count = 0;
+    _io_iface->poke8(0x016, 0x80);
+    while (_io_iface->peek8(0x016) & 0x80) {
+        if (count > 100) {
+            throw uhd::runtime_error("[ad9361_device_t] RX baseband filter cal FAILURE");
+            break;
+        }
+        count++;
+        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
+    }
+
+    /* Disable RX1 & RX2 filter tuners. */
+    _io_iface->poke8(0x1e2, 0x03);
+    _io_iface->poke8(0x1e3, 0x03);
+
+    return bbbw;
+}
+
+/* Calibrate the analog BB TX filter.
+ *
+ * Note that the filter calibration depends heavily on the baseband
+ * bandwidth, so this must be re-done after any change to the TX sample
+ * rate. */
+double ad9361_device_t::_calibrate_baseband_tx_analog_filter()
+{
+    /* For filter tuning, baseband BW is half the complex BW, and must be
+     * between 28e6 and 0.2e6. */
+    double bbbw = _baseband_bw / 2.0;
+    if (bbbw > 20e6) {
+        bbbw = 20e6;
+    } else if (bbbw < 0.625e6) {
+        bbbw = 0.625e6;
+    }
+
+    double txtune_clk = ((1.6 * bbbw * 2 * M_PI) / M_LN2);
+    boost::uint16_t txbbfdiv = std::min<boost::uint16_t>(511, boost::uint16_t(std::ceil(_bbpll_freq / txtune_clk)));
+    _regs.bbftune_mode = (_regs.bbftune_mode & 0xFE)
+            | ((txbbfdiv >> 8) & 0x0001);
+
+    /* Program the divider values. */
+    _io_iface->poke8(0x0d6, (txbbfdiv & 0x00FF));
+    _io_iface->poke8(0x0d7, _regs.bbftune_mode);
+
+    /* Enable the filter tuner. */
+    _io_iface->poke8(0x0ca, 0x22);
+
+    /* Calibrate! */
+    size_t count = 0;
+    _io_iface->poke8(0x016, 0x40);
+    while (_io_iface->peek8(0x016) & 0x40) {
+        if (count > 100) {
+            throw uhd::runtime_error("[ad9361_device_t] TX baseband filter cal FAILURE");
+            break;
+        }
+
+        count++;
+        boost::this_thread::sleep(boost::posix_time::milliseconds(1));
+    }
+
+    /* Disable the filter tuner. */
+    _io_iface->poke8(0x0ca, 0x26);
+
+    return bbbw;
+}
+
+/* Calibrate the secondary TX filter.
+ *
+ * This filter also depends on the TX sample rate, so if a rate change is
+ * made, the previous calibration will no longer be valid. */
+void ad9361_device_t::_calibrate_secondary_tx_filter()
+{
+    /* For filter tuning, baseband BW is half the complex BW, and must be
+     * between 20e6 and 0.53e6. */
+    double bbbw = _baseband_bw / 2.0;
+    if (bbbw > 20e6) {
+        bbbw = 20e6;
+    } else if (bbbw < 0.53e6) {
+        bbbw = 0.53e6;
+    }
+
+    double bbbw_mhz = bbbw / 1e6;
+
+    /* Start with a resistor value of 100 Ohms. */
+    int res = 100;
+
+    /* Calculate target corner frequency. */
+    double corner_freq = 5 * bbbw_mhz * 2 * M_PI;
+
+    /* Iterate through RC values to determine correct combination. */
+    int cap = 0;
+    int i;
+    for (i = 0; i <= 3; i++) {
+        cap = static_cast<int>(std::floor(0.5 + ((1 / ((corner_freq * res) * 1e6)) * 1e12)))
+                - 12;
+
+        if (cap <= 63) {
+            break;
+        }
+
+        res = res * 2;
+    }
+    if (cap > 63) {
+        cap = 63;
+    }
+
+    boost::uint8_t reg0d0, reg0d1, reg0d2;
+
+    /* Translate baseband bandwidths to register settings. */
+    if ((bbbw_mhz * 2) <= 9) {
+        reg0d0 = 0x59;
+    } else if (((bbbw_mhz * 2) > 9) && ((bbbw_mhz * 2) <= 24)) {
+        reg0d0 = 0x56;
+    } else if ((bbbw_mhz * 2) > 24) {
+        reg0d0 = 0x57;
+    } else {
+        throw uhd::runtime_error("[ad9361_device_t] Cal2ndTxFil: INVALID_CODE_PATH bad bbbw_mhz");
+        reg0d0 = 0x00;
+    }
+
+    /* Translate resistor values to register settings. */
+    if (res == 100) {
+        reg0d1 = 0x0c;
+    } else if (res == 200) {
+        reg0d1 = 0x04;
+    } else if (res == 400) {
+        reg0d1 = 0x03;
+    } else if (res == 800) {
+        reg0d1 = 0x01;
+    } else {
+        reg0d1 = 0x0c;
+    }
+
+    reg0d2 = cap;
+
+    /* Program the above-calculated values. Sweet. */
+    _io_iface->poke8(0x0d2, reg0d2);
+    _io_iface->poke8(0x0d1, reg0d1);
+    _io_iface->poke8(0x0d0, reg0d0);
+}
+
+/* Calibrate the RX TIAs.
+ *
+ * Note that the values in the TIA register, after calibration, vary with
+ * the RX gain settings. */
+void ad9361_device_t::_calibrate_rx_TIAs()
+{
+    boost::uint8_t reg1eb = _io_iface->peek8(0x1eb) & 0x3F;
+    boost::uint8_t reg1ec = _io_iface->peek8(0x1ec) & 0x7F;
+    boost::uint8_t reg1e6 = _io_iface->peek8(0x1e6) & 0x07;
+    boost::uint8_t reg1db = 0x00;
+    boost::uint8_t reg1dc = 0x00;
+    boost::uint8_t reg1dd = 0x00;
+    boost::uint8_t reg1de = 0x00;
+    boost::uint8_t reg1df = 0x00;
+
+    /* For calibration, baseband BW is half the complex BW, and must be
+     * between 28e6 and 0.2e6. */
+    double bbbw = _baseband_bw / 2.0;
+    if (bbbw > 20e6) {
+        bbbw = 20e6;
+    } else if (bbbw < 0.20e6) {
+        bbbw = 0.20e6;
+    }
+    double ceil_bbbw_mhz = std::ceil(bbbw / 1e6);
+
+    /* Do some crazy resistor and capacitor math. */
+    int Cbbf = (reg1eb * 160) + (reg1ec * 10) + 140;
+    int R2346 = 18300 * (reg1e6 & 0x07);
+    double CTIA_fF = (Cbbf * R2346 * 0.56) / 3500;
+
+    /* Translate baseband BW to register settings. */
+    if (ceil_bbbw_mhz <= 3) {
+        reg1db = 0xe0;
+    } else if ((ceil_bbbw_mhz > 3) && (ceil_bbbw_mhz <= 10)) {
+        reg1db = 0x60;
+    } else if (ceil_bbbw_mhz > 10) {
+        reg1db = 0x20;
+    } else {
+        throw uhd::runtime_error("[ad9361_device_t] CalRxTias: INVALID_CODE_PATH bad bbbw_mhz");
+    }
+
+    if (CTIA_fF > 2920) {
+        reg1dc = 0x40;
+        reg1de = 0x40;
+        boost::uint8_t temp = (boost::uint8_t) std::min<boost::uint8_t>(127,
+                boost::uint8_t(std::floor(0.5 + ((CTIA_fF - 400.0) / 320.0))));
+        reg1dd = temp;
+        reg1df = temp;
+    } else {
+        boost::uint8_t temp = boost::uint8_t(std::floor(0.5 + ((CTIA_fF - 400.0) / 40.0)) + 0x40);
+        reg1dc = temp;
+        reg1de = temp;
+        reg1dd = 0;
+        reg1df = 0;
+    }
+
+    /* w00t. Settings calculated. Program them and roll out. */
+    _io_iface->poke8(0x1db, reg1db);
+    _io_iface->poke8(0x1dd, reg1dd);
+    _io_iface->poke8(0x1df, reg1df);
+    _io_iface->poke8(0x1dc, reg1dc);
+    _io_iface->poke8(0x1de, reg1de);
+}
+
+/* Setup the AD9361 ADC.
+ *
+ * There are 40 registers that control the ADC's operation, most of the
+ * values of which must be derived mathematically, dependent on the current
+ * setting of the BBPLL. Note that the order of calculation is critical, as
+ * some of the 40 registers depend on the values in others. */
+void ad9361_device_t::_setup_adc()
+{
+    double bbbw_mhz = (((_bbpll_freq / 1e6) / _rx_bbf_tunediv) * M_LN2) \
+                  / (1.4 * 2 * M_PI);
+
+    /* For calibration, baseband BW is half the complex BW, and must be
+     * between 28e6 and 0.2e6. */
+    if(bbbw_mhz > 28) {
+        bbbw_mhz = 28;
+    } else if (bbbw_mhz < 0.20) {
+        bbbw_mhz = 0.20;
+    }
+
+    boost::uint8_t rxbbf_c3_msb = _io_iface->peek8(0x1eb) & 0x3F;
+    boost::uint8_t rxbbf_c3_lsb = _io_iface->peek8(0x1ec) & 0x7F;
+    boost::uint8_t rxbbf_r2346 = _io_iface->peek8(0x1e6) & 0x07;
+
+    double fsadc = _adcclock_freq / 1e6;
+
+    /* Sort out the RC time constant for our baseband bandwidth... */
+    double rc_timeconst = 0.0;
+    if(bbbw_mhz < 18) {
+        rc_timeconst = (1 / ((1.4 * 2 * M_PI) \
+                            * (18300 * rxbbf_r2346)
+                            * ((160e-15 * rxbbf_c3_msb)
+                                + (10e-15 * rxbbf_c3_lsb) + 140e-15)
+                            * (bbbw_mhz * 1e6)));
+    } else {
+        rc_timeconst = (1 / ((1.4 * 2 * M_PI) \
+                            * (18300 * rxbbf_r2346)
+                            * ((160e-15 * rxbbf_c3_msb)
+                                + (10e-15 * rxbbf_c3_lsb) + 140e-15)
+                            * (bbbw_mhz * 1e6) * (1 + (0.01 * (bbbw_mhz - 18)))));
+    }
+
+    double scale_res = sqrt(1 / rc_timeconst);
+    double scale_cap = sqrt(1 / rc_timeconst);
+
+    double scale_snr = (_adcclock_freq < 80e6) ? 1.0 : 1.584893192;
+    double maxsnr = 640 / 160;
+
+    /* Calculate the values for all 40 settings registers.
+     *
+     * DO NOT TOUCH THIS UNLESS YOU KNOW EXACTLY WHAT YOU ARE DOING. kthx.*/
+    boost::uint8_t data[40];
+    data[0] = 0;    data[1] = 0; data[2] = 0; data[3] = 0x24;
+    data[4] = 0x24; data[5] = 0; data[6] = 0;
+    data[7] = std::min<boost::uint8_t>(124, boost::uint8_t(std::floor(-0.5
+                    + (80.0 * scale_snr * scale_res
+                    * std::min<double>(1.0, sqrt(maxsnr * fsadc / 640.0))))));
+    double data007 = data[7];
+    data[8] = std::min<boost::uint8_t>(255, boost::uint8_t(std::floor(0.5
+                    + ((20.0 * (640.0 / fsadc) * ((data007 / 80.0))
+                    / (scale_res * scale_cap))))));
+    data[10] = std::min<boost::uint8_t>(127, boost::uint8_t(std::floor(-0.5 + (77.0 * scale_res
+                    * std::min<double>(1.0, sqrt(maxsnr * fsadc / 640.0))))));
+    double data010 = data[10];
+    data[9] = std::min<boost::uint8_t>(127, boost::uint8_t(std::floor(0.8 * data010)));
+    data[11] = std::min<boost::uint8_t>(255, boost::uint8_t(std::floor(0.5
+                    + (20.0 * (640.0 / fsadc) * ((data010 / 77.0)
+                    / (scale_res * scale_cap))))));
+    data[12] = std::min<boost::uint8_t>(127, boost::uint8_t(std::floor(-0.5
+                    + (80.0 * scale_res * std::min<double>(1.0,
+                    sqrt(maxsnr * fsadc / 640.0))))));
+    double data012 = data[12];
+    data[13] = std::min<boost::uint8_t>(255, boost::uint8_t(std::floor(-1.5
+                    + (20.0 * (640.0 / fsadc) * ((data012 / 80.0)
+                    / (scale_res * scale_cap))))));
+    data[14] = 21 * boost::uint8_t(std::floor(0.1 * 640.0 / fsadc));
+    data[15] = std::min<boost::uint8_t>(127, boost::uint8_t(1.025 * data007));
+    double data015 = data[15];
+    data[16] = std::min<boost::uint8_t>(127, boost::uint8_t(std::floor((data015
+                    * (0.98 + (0.02 * std::max<double>(1.0,
+                    (640.0 / fsadc) / maxsnr)))))));
+    data[17] = data[15];
+    data[18] = std::min<boost::uint8_t>(127, boost::uint8_t(0.975 * (data010)));
+    double data018 = data[18];
+    data[19] = std::min<boost::uint8_t>(127, boost::uint8_t(std::floor((data018
+                    * (0.98 + (0.02 * std::max<double>(1.0,
+                    (640.0 / fsadc) / maxsnr)))))));
+    data[20] = data[18];
+    data[21] = std::min<boost::uint8_t>(127, boost::uint8_t(0.975 * data012));
+    double data021 = data[21];
+    data[22] = std::min<boost::uint8_t>(127, boost::uint8_t(std::floor((data021
+                    * (0.98 + (0.02 * std::max<double>(1.0,
+                    (640.0 / fsadc) / maxsnr)))))));
+    data[23] = data[21];
+    data[24] = 0x2e;
+    data[25] = boost::uint8_t(std::floor(128.0 + std::min<double>(63.0,
+                    63.0 * (fsadc / 640.0))));
+    data[26] = boost::uint8_t(std::floor(std::min<double>(63.0, 63.0 * (fsadc / 640.0)
+                    * (0.92 + (0.08 * (640.0 / fsadc))))));
+    data[27] = boost::uint8_t(std::floor(std::min<double>(63.0,
+                    32.0 * sqrt(fsadc / 640.0))));
+    data[28] = boost::uint8_t(std::floor(128.0 + std::min<double>(63.0,
+                    63.0 * (fsadc / 640.0))));
+    data[29] = boost::uint8_t(std::floor(std::min<double>(63.0,
+                    63.0 * (fsadc / 640.0)
+                    * (0.92 + (0.08 * (640.0 / fsadc))))));
+    data[30] = boost::uint8_t(std::floor(std::min<double>(63.0,
+                    32.0 * sqrt(fsadc / 640.0))));
+    data[31] = boost::uint8_t(std::floor(128.0 + std::min<double>(63.0,
+                    63.0 * (fsadc / 640.0))));
+    data[32] = boost::uint8_t(std::floor(std::min<double>(63.0,
+                    63.0 * (fsadc / 640.0) * (0.92
+                    + (0.08 * (640.0 / fsadc))))));
+    data[33] = boost::uint8_t(std::floor(std::min<double>(63.0,
+                    63.0 * sqrt(fsadc / 640.0))));
+    data[34] = std::min<boost::uint8_t>(127, boost::uint8_t(std::floor(64.0
+                    * sqrt(fsadc / 640.0))));
+    data[35] = 0x40;
+    data[36] = 0x40;
+    data[37] = 0x2c;
+    data[38] = 0x00;
+    data[39] = 0x00;
+
+    /* Program the registers! */
+    for(size_t i = 0; i < 40; i++) {
+        _io_iface->poke8(0x200+i, data[i]);
+    }
+}
+
+/* Calibrate the baseband DC offset.
+ *
+ * Note that this function is called from within the TX quadrature
+ * calibration function! */
+void ad9361_device_t::_calibrate_baseband_dc_offset()
+{
+    _io_iface->poke8(0x193, 0x3f); // Calibration settings
+    _io_iface->poke8(0x190, 0x0f); // Set tracking coefficient
+    //write_ad9361_reg(device, 0x190, /*0x0f*//*0xDF*/0x80*1 | 0x40*1 | (16+8/*+4*/)); // Set tracking coefficient: don't *4 counter, do decim /4, increased gain shift
+    _io_iface->poke8(0x194, 0x01); // More calibration settings
+
+    /* Start that calibration, baby. */
+    size_t count = 0;
+    _io_iface->poke8(0x016, 0x01);
+    while (_io_iface->peek8(0x016) & 0x01) {
+        if (count > 100) {
+            throw uhd::runtime_error("[ad9361_device_t] Baseband DC Offset Calibration Failure");
+            break;
+        }
+        count++;
+        boost::this_thread::sleep(boost::posix_time::milliseconds(5));
+    }
+}
+
+/* Calibrate the RF DC offset.
+ *
+ * Note that this function is called from within the TX quadrature
+ * calibration function. */
+void ad9361_device_t::_calibrate_rf_dc_offset()
+{
+    /* Some settings are frequency-dependent. */
+    if (_rx_freq < 4e9) {
+        _io_iface->poke8(0x186, 0x32); // RF DC Offset count
+        _io_iface->poke8(0x187, 0x24);
+        _io_iface->poke8(0x188, 0x05);
+    } else {
+        _io_iface->poke8(0x186, 0x28); // RF DC Offset count
+        _io_iface->poke8(0x187, 0x34);
+        _io_iface->poke8(0x188, 0x06);
+    }
+
+    _io_iface->poke8(0x185, 0x20); // RF DC Offset wait count
+    _io_iface->poke8(0x18b, 0x83);
+    _io_iface->poke8(0x189, 0x30);
+
+    /* Run the calibration! */
+    size_t count = 0;
+    _io_iface->poke8(0x016, 0x02);
+    while (_io_iface->peek8(0x016) & 0x02) {
+        if (count > 100) {
+            throw uhd::runtime_error("[ad9361_device_t] RF DC Offset Calibration Failure");
+            break;
+        }
+        count++;
+        boost::this_thread::sleep(boost::posix_time::milliseconds(50));
+    }
+}
+
+/* Start the RX quadrature calibration.
+ *
+ * Note that we are using AD9361's 'tracking' feature for RX quadrature
+ * calibration, so once it starts it continues to free-run during operation.
+ * It should be re-run for large frequency changes. */
+void ad9361_device_t::_calibrate_rx_quadrature()
+{
+    /* Configure RX Quadrature calibration settings. */
+    _io_iface->poke8(0x168, 0x03); // Set tone level for cal
+    _io_iface->poke8(0x16e, 0x25); // RX Gain index to use for cal
+    _io_iface->poke8(0x16a, 0x75); // Set Kexp phase
+    _io_iface->poke8(0x16b, 0x15); // Set Kexp amplitude
+    _io_iface->poke8(0x169, 0xcf); // Continuous tracking mode
+    _io_iface->poke8(0x18b, 0xad);
+}
+
+/* TX quadtrature calibration routine.
+ *
+ * The TX quadrature needs to be done twice, once for each TX chain, with
+ * only one register change in between. Thus, this function enacts the
+ * calibrations, and it is called from calibrate_tx_quadrature. */
+void ad9361_device_t::_tx_quadrature_cal_routine() {
+    /* This is a weird process, but here is how it works:
+     * 1) Read the calibrated NCO frequency bits out of 0A3.
+     * 2) Write the two bits to the RX NCO freq part of 0A0.
+     * 3) Re-read 0A3 to get bits [5:0] because maybe they changed?
+     * 4) Update only the TX NCO freq bits in 0A3.
+     * 5) Profit (I hope). */
+    boost::uint8_t reg0a3 = _io_iface->peek8(0x0a3);
+    boost::uint8_t nco_freq = (reg0a3 & 0xC0);
+    _io_iface->poke8(0x0a0, 0x15 | (nco_freq >> 1));
+    reg0a3 = _io_iface->peek8(0x0a3);
+    _io_iface->poke8(0x0a3, (reg0a3 & 0x3F) | nco_freq);
+
+    /* It is possible to reach a configuration that won't operate correctly,
+     * where the two test tones used for quadrature calibration are outside
+     * of the RX BBF, and therefore don't make it to the ADC. We will check
+     * for that scenario here. */
+    double max_cal_freq = (((_baseband_bw * _tfir_factor)
+            * ((nco_freq >> 6) + 1)) / 32) * 2;
+    double bbbw = _baseband_bw / 2.0; // bbbw represents the one-sided BW
+    if (bbbw > 28e6) {
+        bbbw = 28e6;
+    } else if (bbbw < 0.20e6) {
+        bbbw = 0.20e6;
+    }
+    if (max_cal_freq > bbbw)
+        throw uhd::runtime_error("[ad9361_device_t] max_cal_freq > bbbw");
+
+    _io_iface->poke8(0x0a1, 0x7B); // Set tracking coefficient
+    _io_iface->poke8(0x0a9, 0xff); // Cal count
+    _io_iface->poke8(0x0a2, 0x7f); // Cal Kexp
+    _io_iface->poke8(0x0a5, 0x01); // Cal magnitude threshold VVVV
+    _io_iface->poke8(0x0a6, 0x01);
+
+    /* The gain table index used for calibration must be adjusted for the
+     * mid-table to get a TIA index = 1 and LPF index = 0. */
+    if ((_rx_freq >= 1300e6) && (_rx_freq < 4000e6)) {
+        _io_iface->poke8(0x0aa, 0x22); // Cal gain table index
+    } else {
+        _io_iface->poke8(0x0aa, 0x25); // Cal gain table index
+    }
+
+    _io_iface->poke8(0x0a4, 0xf0); // Cal setting conut
+    _io_iface->poke8(0x0ae, 0x00); // Cal LPF gain index (split mode)
+
+    /* First, calibrate the baseband DC offset. */
+    _calibrate_baseband_dc_offset();
+
+    /* Second, calibrate the RF DC offset. */
+    _calibrate_rf_dc_offset();
+
+    /* Now, calibrate the TX quadrature! */
+    size_t count = 0;
+    _io_iface->poke8(0x016, 0x10);
+    while (_io_iface->peek8(0x016) & 0x10) {
+        if (count > 100) {
+            throw uhd::runtime_error("[ad9361_device_t] TX Quadrature Calibration Failure");
+            break;
+        }
+        count++;
+        boost::this_thread::sleep(boost::posix_time::milliseconds(10));
+    }
+}
+
+/* Run the TX quadrature calibration.
+ *
+ * Note that from within this function we are also triggering the baseband
+ * and RF DC calibrations. */
+void ad9361_device_t::_calibrate_tx_quadrature()
+{
+    /* Make sure we are, in fact, in the ALERT state. If not, something is
+     * terribly wrong in the driver execution flow. */
+    if ((_io_iface->peek8(0x017) & 0x0F) != 5) {
+        throw uhd::runtime_error("[ad9361_device_t] TX Quad Cal started, but not in ALERT");
+    }
+
+    /* Turn off free-running and continuous calibrations. Note that this
+     * will get turned back on at the end of the RX calibration routine. */
+    _io_iface->poke8(0x169, 0xc0);
+
+    /* This calibration must be done in a certain order, and for both TX_A
+     * and TX_B, separately. Store the original setting so that we can
+     * restore it later. */
+    boost::uint8_t orig_reg_inputsel = _regs.inputsel;
+
+    /***********************************************************************
+     * TX1/2-A Calibration
+     **********************************************************************/
+    _regs.inputsel = _regs.inputsel & 0xBF;
+    _io_iface->poke8(0x004, _regs.inputsel);
+
+    _tx_quadrature_cal_routine();
+
+    /***********************************************************************
+     * TX1/2-B Calibration
+     **********************************************************************/
+    _regs.inputsel = _regs.inputsel | 0x40;
+    _io_iface->poke8(0x004, _regs.inputsel);
+
+    _tx_quadrature_cal_routine();
+
+    /***********************************************************************
+     * fin
+     **********************************************************************/
+    _regs.inputsel = orig_reg_inputsel;
+    _io_iface->poke8(0x004, orig_reg_inputsel);
+}
+
+
+/***********************************************************************
+ * Other Misc Setup Functions
+ ***********************************************************************/
+
+/* Program the mixer gain table.
+ *
+ * Note that this table is fixed for all frequency settings. */
+void ad9361_device_t::_program_mixer_gm_subtable()
+{
+    boost::uint8_t gain[] = { 0x78, 0x74, 0x70, 0x6C, 0x68, 0x64, 0x60, 0x5C, 0x58,
+            0x54, 0x50, 0x4C, 0x48, 0x30, 0x18, 0x00 };
+    boost::uint8_t gm[] = { 0x00, 0x0D, 0x15, 0x1B, 0x21, 0x25, 0x29, 0x2C, 0x2F, 0x31,
+            0x33, 0x34, 0x35, 0x3A, 0x3D, 0x3E };
+
+    /* Start the clock. */
+    _io_iface->poke8(0x13f, 0x02);
+
+    /* Program the GM Sub-table. */
+    int i;
+    for (i = 15; i >= 0; i--) {
+        _io_iface->poke8(0x138, i);
+        _io_iface->poke8(0x139, gain[(15 - i)]);
+        _io_iface->poke8(0x13A, 0x00);
+        _io_iface->poke8(0x13B, gm[(15 - i)]);
+        _io_iface->poke8(0x13F, 0x06);
+        _io_iface->poke8(0x13C, 0x00);
+        _io_iface->poke8(0x13C, 0x00);
+    }
+
+    /* Clear write bit and stop clock. */
+    _io_iface->poke8(0x13f, 0x02);
+    _io_iface->poke8(0x13C, 0x00);
+    _io_iface->poke8(0x13C, 0x00);
+    _io_iface->poke8(0x13f, 0x00);
+}
+
+/* Program the gain table.
+ *
+ * There are three different gain tables for different frequency ranges! */
+void ad9361_device_t::_program_gain_table() {
+    /* Figure out which gain table we should be using for our current
+     * frequency band. */
+    boost::uint8_t (*gain_table)[5] = NULL;
+    boost::uint8_t new_gain_table;
+    if (_rx_freq < 1300e6) {
+        gain_table = gain_table_sub_1300mhz;
+        new_gain_table = 1;
+    } else if (_rx_freq < 4e9) {
+        gain_table = gain_table_1300mhz_to_4000mhz;
+        new_gain_table = 2;
+    } else if (_rx_freq <= 6e9) {
+        gain_table = gain_table_4000mhz_to_6000mhz;
+        new_gain_table = 3;
+    } else {
+        throw uhd::runtime_error("[ad9361_device_t] Wrong _rx_freq value");
+        new_gain_table = 1;
+    }
+
+    /* Only re-program the gain table if there has been a band change. */
+    if (_curr_gain_table == new_gain_table) {
+        return;
+    } else {
+        _curr_gain_table = new_gain_table;
+    }
+
+    /* Okay, we have to program a new gain table. Sucks, brah. Start the
+     * gain table clock. */
+    _io_iface->poke8(0x137, 0x1A);
+
+    /* IT'S PROGRAMMING TIME. */
+    boost::uint8_t index = 0;
+    for (; index < 77; index++) {
+        _io_iface->poke8(0x130, index);
+        _io_iface->poke8(0x131, gain_table[index][1]);
+        _io_iface->poke8(0x132, gain_table[index][2]);
+        _io_iface->poke8(0x133, gain_table[index][3]);
+        _io_iface->poke8(0x137, 0x1E);
+        _io_iface->poke8(0x134, 0x00);
+        _io_iface->poke8(0x134, 0x00);
+    }
+
+    /* Everything above the 77th index is zero. */
+    for (; index < 91; index++) {
+        _io_iface->poke8(0x130, index);
+        _io_iface->poke8(0x131, 0x00);
+        _io_iface->poke8(0x132, 0x00);
+        _io_iface->poke8(0x133, 0x00);
+        _io_iface->poke8(0x137, 0x1E);
+        _io_iface->poke8(0x134, 0x00);
+        _io_iface->poke8(0x134, 0x00);
+    }
+
+    /* Clear the write bit and stop the gain clock. */
+    _io_iface->poke8(0x137, 0x1A);
+    _io_iface->poke8(0x134, 0x00);
+    _io_iface->poke8(0x134, 0x00);
+    _io_iface->poke8(0x137, 0x00);
+}
+
+/* Setup gain control registers.
+ *
+ * This really only needs to be done once, at initialization. */
+void ad9361_device_t::_setup_gain_control()
+{
+    _io_iface->poke8(0x0FA, 0xE0); // Gain Control Mode Select
+    _io_iface->poke8(0x0FB, 0x08); // Table, Digital Gain, Man Gain Ctrl
+    _io_iface->poke8(0x0FC, 0x23); // Incr Step Size, ADC Overrange Size
+    _io_iface->poke8(0x0FD, 0x4C); // Max Full/LMT Gain Table Index
+    _io_iface->poke8(0x0FE, 0x44); // Decr Step Size, Peak Overload Time
+    _io_iface->poke8(0x100, 0x6F); // Max Digital Gain
+    _io_iface->poke8(0x104, 0x2F); // ADC Small Overload Threshold
+    _io_iface->poke8(0x105, 0x3A); // ADC Large Overload Threshold
+    _io_iface->poke8(0x107, 0x31); // Large LMT Overload Threshold
+    _io_iface->poke8(0x108, 0x39); // Small LMT Overload Threshold
+    _io_iface->poke8(0x109, 0x23); // Rx1 Full/LMT Gain Index
+    _io_iface->poke8(0x10A, 0x58); // Rx1 LPF Gain Index
+    _io_iface->poke8(0x10B, 0x00); // Rx1 Digital Gain Index
+    _io_iface->poke8(0x10C, 0x23); // Rx2 Full/LMT Gain Index
+    _io_iface->poke8(0x10D, 0x18); // Rx2 LPF Gain Index
+    _io_iface->poke8(0x10E, 0x00); // Rx2 Digital Gain Index
+    _io_iface->poke8(0x114, 0x30); // Low Power Threshold
+    _io_iface->poke8(0x11A, 0x27); // Initial LMT Gain Limit
+    _io_iface->poke8(0x081, 0x00); // Tx Symbol Gain Control
+}
+
+/* Setup the RX or TX synthesizers.
+ *
+ * This setup depends on a fixed look-up table, which is stored in an
+ * included header file. The table is indexed based on the passed VCO rate.
+ */
+void ad9361_device_t::_setup_synth(direction_t direction, double vcorate)
+{
+    /* The vcorates in the vco_index array represent lower boundaries for
+     * rates. Once we find a match, we use that index to look-up the rest of
+     * the register values in the LUT. */
+    int vcoindex = 0;
+    for (size_t i = 0; i < 53; i++) {
+        vcoindex = i;
+        if (vcorate > vco_index[i]) {
+            break;
+        }
+    }
+    if (vcoindex > 53)
+        throw uhd::runtime_error("[ad9361_device_t] vcoindex > 53");
+
+    /* Parse the values out of the LUT based on our calculated index... */
+    boost::uint8_t vco_output_level = synth_cal_lut[vcoindex][0];
+    boost::uint8_t vco_varactor = synth_cal_lut[vcoindex][1];
+    boost::uint8_t vco_bias_ref = synth_cal_lut[vcoindex][2];
+    boost::uint8_t vco_bias_tcf = synth_cal_lut[vcoindex][3];
+    boost::uint8_t vco_cal_offset = synth_cal_lut[vcoindex][4];
+    boost::uint8_t vco_varactor_ref = synth_cal_lut[vcoindex][5];
+    boost::uint8_t charge_pump_curr = synth_cal_lut[vcoindex][6];
+    boost::uint8_t loop_filter_c2 = synth_cal_lut[vcoindex][7];
+    boost::uint8_t loop_filter_c1 = synth_cal_lut[vcoindex][8];
+    boost::uint8_t loop_filter_r1 = synth_cal_lut[vcoindex][9];
+    boost::uint8_t loop_filter_c3 = synth_cal_lut[vcoindex][10];
+    boost::uint8_t loop_filter_r3 = synth_cal_lut[vcoindex][11];
+
+    /* ... annnd program! */
+    if (direction == RX) {
+        _io_iface->poke8(0x23a, 0x40 | vco_output_level);
+        _io_iface->poke8(0x239, 0xC0 | vco_varactor);
+        _io_iface->poke8(0x242, vco_bias_ref | (vco_bias_tcf << 3));
+        _io_iface->poke8(0x238, (vco_cal_offset << 3));
+        _io_iface->poke8(0x245, 0x00);
+        _io_iface->poke8(0x251, vco_varactor_ref);
+        _io_iface->poke8(0x250, 0x70);
+        _io_iface->poke8(0x23b, 0x80 | charge_pump_curr);
+        _io_iface->poke8(0x23e, loop_filter_c1 | (loop_filter_c2 << 4));
+        _io_iface->poke8(0x23f, loop_filter_c3 | (loop_filter_r1 << 4));
+        _io_iface->poke8(0x240, loop_filter_r3);
+    } else if (direction == TX) {
+        _io_iface->poke8(0x27a, 0x40 | vco_output_level);
+        _io_iface->poke8(0x279, 0xC0 | vco_varactor);
+        _io_iface->poke8(0x282, vco_bias_ref | (vco_bias_tcf << 3));
+        _io_iface->poke8(0x278, (vco_cal_offset << 3));
+        _io_iface->poke8(0x285, 0x00);
+        _io_iface->poke8(0x291, vco_varactor_ref);
+        _io_iface->poke8(0x290, 0x70);
+        _io_iface->poke8(0x27b, 0x80 | charge_pump_curr);
+        _io_iface->poke8(0x27e, loop_filter_c1 | (loop_filter_c2 << 4));
+        _io_iface->poke8(0x27f, loop_filter_c3 | (loop_filter_r1 << 4));
+        _io_iface->poke8(0x280, loop_filter_r3);
+    } else {
+        throw uhd::runtime_error("[ad9361_device_t] [_setup_synth] INVALID_CODE_PATH");
+    }
+}
+
+
+/* Tune the baseband VCO.
+ *
+ * This clock signal is what gets fed to the ADCs and DACs. This function is
+ * not exported outside of this file, and is invoked based on the rate
+ * fed to the public set_clock_rate function. */
+double ad9361_device_t::_tune_bbvco(const double rate)
+{
+    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] rate=%.10f\n") % rate;
+
+    /* Let's not re-tune to the same frequency over and over... */
+    if (freq_is_nearly_equal(rate, _req_coreclk)) {
+        return _adcclock_freq;
+    }
+
+    _req_coreclk = rate;
+
+    const double fref = 40e6;
+    const int modulus = 2088960;
+    const double vcomax = 1430e6;
+    const double vcomin = 672e6;
+    double vcorate;
+    int vcodiv;
+
+    /* Iterate over VCO dividers until appropriate divider is found. */
+    int i = 1;
+    for (; i <= 6; i++) {
+        vcodiv = 1 << i;
+        vcorate = rate * vcodiv;
+
+        if (vcorate >= vcomin && vcorate <= vcomax)
+            break;
+    }
+    if (i == 7)
+        throw uhd::runtime_error("[ad9361_device_t] _tune_bbvco: wrong vcorate");
+
+    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] vcodiv=%d vcorate=%.10f\n") % vcodiv % vcorate;
+    /* Fo = Fref * (Nint + Nfrac / mod) */
+    int nint = static_cast<int>(vcorate / fref);
+    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] (nint)=%.10f\n") % (vcorate / fref);
+    int nfrac = static_cast<int>(boost::math::round(((vcorate / fref) - (double) nint) * (double) modulus));
+    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] (nfrac)=%.10f\n") % (((vcorate / fref) - (double) nint) * (double) modulus);
+    UHD_LOG << boost::format("[ad9361_device_t::_tune_bbvco] nint=%d nfrac=%d\n") % nint % nfrac;
+    double actual_vcorate = fref
+            * ((double) nint + ((double) nfrac / (double) modulus));
+
+    /* Scale CP current according to VCO rate */
+    const double icp_baseline = 150e-6;
+    const double freq_baseline = 1280e6;
+    double icp = icp_baseline * (actual_vcorate / freq_baseline);
+    int icp_reg = static_cast<int>(icp / 25e-6) - 1;
+
+    _io_iface->poke8(0x045, 0x00);            // REFCLK / 1 to BBPLL
+    _io_iface->poke8(0x046, icp_reg & 0x3F);  // CP current
+    _io_iface->poke8(0x048, 0xe8);            // BBPLL loop filters
+    _io_iface->poke8(0x049, 0x5b);            // BBPLL loop filters
+    _io_iface->poke8(0x04a, 0x35);            // BBPLL loop filters
+
+    _io_iface->poke8(0x04b, 0xe0);
+    _io_iface->poke8(0x04e, 0x10);            // Max accuracy
+
+    _io_iface->poke8(0x043, nfrac & 0xFF);         // Nfrac[7:0]
+    _io_iface->poke8(0x042, (nfrac >> 8) & 0xFF);  // Nfrac[15:8]
+    _io_iface->poke8(0x041, (nfrac >> 16) & 0xFF); // Nfrac[23:16]
+    _io_iface->poke8(0x044, nint);                 // Nint
+
+    _calibrate_lock_bbpll();
+
+    _regs.bbpll = (_regs.bbpll & 0xF8) | i;
+
+    _bbpll_freq = actual_vcorate;
+    _adcclock_freq = (actual_vcorate / vcodiv);
+
+    return _adcclock_freq;
+}
+
+/* This function re-programs all of the gains in the system.
+ *
+ * Because the gain values match to different gain indices based on the
+ * current operating band, this function can be called to update all gain
+ * settings to the appropriate index after a re-tune. */
+void ad9361_device_t::_reprogram_gains()
+{
+    set_gain(RX, CHAIN_1,_rx1_gain);
+    set_gain(RX, CHAIN_2,_rx2_gain);
+    set_gain(TX, CHAIN_1,_tx1_gain);
+    set_gain(TX, CHAIN_2,_tx2_gain);
+}
+
+/* This is the internal tune function, not available for a host call.
+ *
+ * Calculate the VCO settings for the requested frquency, and then either
+ * tune the RX or TX VCO. */
+double ad9361_device_t::_tune_helper(direction_t direction, const double value)
+{
+    /* The RFPLL runs from 6 GHz - 12 GHz */
+    const double fref = 80e6;
+    const int modulus = 8388593;
+    const double vcomax = 12e9;
+    const double vcomin = 6e9;
+    double vcorate;
+    int vcodiv;
+
+    /* Iterate over VCO dividers until appropriate divider is found. */
+    int i;
+    for (i = 0; i <= 6; i++) {
+        vcodiv = 2 << i;
+        vcorate = value * vcodiv;
+        if (vcorate >= vcomin && vcorate <= vcomax)
+            break;
+    }
+    if (i == 7)
+        throw uhd::runtime_error("[ad9361_device_t] RFVCO can't find valid VCO rate!");
+
+    int nint = static_cast<int>(vcorate / fref);
+    int nfrac = static_cast<int>(((vcorate / fref) - nint) * modulus);
+
+    double actual_vcorate = fref * (nint + (double) (nfrac) / modulus);
+    double actual_lo = actual_vcorate / vcodiv;
+
+    if (direction == RX) {
+
+        _req_rx_freq = value;
+
+        /* Set band-specific settings. */
+        if (value < _client_params->get_band_edge(AD9361_RX_BAND0)) {
+            _regs.inputsel = (_regs.inputsel & 0xC0) | 0x30;
+        } else if ((value
+                >= _client_params->get_band_edge(AD9361_RX_BAND0))
+                && (value
+                        < _client_params->get_band_edge(AD9361_RX_BAND1))) {
+            _regs.inputsel = (_regs.inputsel & 0xC0) | 0x0C;
+        } else if ((value
+                >= _client_params->get_band_edge(AD9361_RX_BAND1))
+                && (value <= 6e9)) {
+            _regs.inputsel = (_regs.inputsel & 0xC0) | 0x03;
+        } else {
+            throw uhd::runtime_error("[ad9361_device_t] [_tune_helper] INVALID_CODE_PATH");
+        }
+
+        _io_iface->poke8(0x004, _regs.inputsel);
+
+        /* Store vcodiv setting. */
+        _regs.vcodivs = (_regs.vcodivs & 0xF0) | (i & 0x0F);
+
+        /* Setup the synthesizer. */
+        _setup_synth(RX, actual_vcorate);
+
+        /* Tune!!!! */
+        _io_iface->poke8(0x233, nfrac & 0xFF);
+        _io_iface->poke8(0x234, (nfrac >> 8) & 0xFF);
+        _io_iface->poke8(0x235, (nfrac >> 16) & 0xFF);
+        _io_iface->poke8(0x232, (nint >> 8) & 0xFF);
+        _io_iface->poke8(0x231, nint & 0xFF);
+        _io_iface->poke8(0x005, _regs.vcodivs);
+
+        /* Lock the PLL! */
+        boost::this_thread::sleep(boost::posix_time::milliseconds(2));
+        if ((_io_iface->peek8(0x247) & 0x02) == 0) {
+            throw uhd::runtime_error("[ad9361_device_t] RX PLL NOT LOCKED");
+        }
+
+        _rx_freq = actual_lo;
+
+        return actual_lo;
+
+    } else {
+
+        _req_tx_freq = value;
+
+        /* Set band-specific settings. */
+        if (value < _client_params->get_band_edge(AD9361_TX_BAND0)) {
+            _regs.inputsel = _regs.inputsel | 0x40;
+        } else if ((value
+                >= _client_params->get_band_edge(AD9361_TX_BAND0))
+                && (value <= 6e9)) {
+            _regs.inputsel = _regs.inputsel & 0xBF;
+        } else {
+            throw uhd::runtime_error("[ad9361_device_t] [_tune_helper] INVALID_CODE_PATH");
+        }
+
+        _io_iface->poke8(0x004, _regs.inputsel);
+
+        /* Store vcodiv setting. */
+        _regs.vcodivs = (_regs.vcodivs & 0x0F) | ((i & 0x0F) << 4);
+
+        /* Setup the synthesizer. */
+        _setup_synth(TX, actual_vcorate);
+
+        /* Tune it, homey. */
+        _io_iface->poke8(0x273, nfrac & 0xFF);
+        _io_iface->poke8(0x274, (nfrac >> 8) & 0xFF);
+        _io_iface->poke8(0x275, (nfrac >> 16) & 0xFF);
+        _io_iface->poke8(0x272, (nint >> 8) & 0xFF);
+        _io_iface->poke8(0x271, nint & 0xFF);
+        _io_iface->poke8(0x005, _regs.vcodivs);
+
+        /* Lock the PLL! */
+        boost::this_thread::sleep(boost::posix_time::milliseconds(2));
+        if ((_io_iface->peek8(0x287) & 0x02) == 0) {
+            throw uhd::runtime_error("[ad9361_device_t] TX PLL NOT LOCKED");
+        }
+
+        _tx_freq = actual_lo;
+
+        return actual_lo;
+    }
+}
+
+/* Configure the various clock / sample rates in the RX and TX chains.
+ *
+ * Functionally, this function configures AD9361's RX and TX rates. For
+ * a requested TX & RX rate, it sets the interpolation & decimation filters,
+ * and tunes the VCO that feeds the ADCs and DACs.
+ */
+double ad9361_device_t::_setup_rates(const double rate)
+{
+    /* If we make it into this function, then we are tuning to a new rate.
+     * Store the new rate. */
+    _req_clock_rate = rate;
+
+    /* Set the decimation and interpolation values in the RX and TX chains.
+     * This also switches filters in / out. Note that all transmitters and
+     * receivers have to be turned on for the calibration portion of
+     * bring-up, and then they will be switched out to reflect the actual
+     * user-requested antenna selections. */
+    int divfactor = 0;
+    _tfir_factor = 0;
+    if (rate < 0.33e6) {
+        // RX1 + RX2 enabled, 3, 2, 2, 4
+        _regs.rxfilt = B8(11101111);
+
+        // TX1 + TX2 enabled, 3, 2, 2, 4
+        _regs.txfilt = B8(11101111);
+
+        divfactor = 48;
+        _tfir_factor = 2;
+    } else if (rate < 0.66e6) {
+        // RX1 + RX2 enabled, 2, 2, 2, 4
+        _regs.rxfilt = B8(11011111);
+
+        // TX1 + TX2 enabled, 2, 2, 2, 4
+        _regs.txfilt = B8(11011111);
+
+        divfactor = 32;
+        _tfir_factor = 2;
+    } else if (rate <= 20e6) {
+        // RX1 + RX2 enabled, 2, 2, 2, 2
+        _regs.rxfilt = B8(11011110);
+
+        // TX1 + TX2 enabled, 2, 2, 2, 2
+        _regs.txfilt = B8(11011110);
+
+        divfactor = 16;
+        _tfir_factor = 2;
+    } else if ((rate > 20e6) && (rate < 23e6)) {
+        // RX1 + RX2 enabled, 3, 2, 2, 2
+        _regs.rxfilt = B8(11101110);
+
+        // TX1 + TX2 enabled, 3, 1, 2, 2
+        _regs.txfilt = B8(11100110);
+
+        divfactor = 24;
+        _tfir_factor = 2;
+    } else if ((rate >= 23e6) && (rate < 41e6)) {
+        // RX1 + RX2 enabled, 2, 2, 2, 2
+        _regs.rxfilt = B8(11011110);
+
+        // TX1 + TX2 enabled, 1, 2, 2, 2
+        _regs.txfilt = B8(11001110);
+
+        divfactor = 16;
+        _tfir_factor = 2;
+    } else if ((rate >= 41e6) && (rate <= 56e6)) {
+        // RX1 + RX2 enabled, 3, 1, 2, 2
+        _regs.rxfilt = B8(11100110);
+
+        // TX1 + TX2 enabled, 3, 1, 1, 2
+        _regs.txfilt = B8(11100010);
+
+        divfactor = 12;
+        _tfir_factor = 2;
+    } else if ((rate > 56e6) && (rate <= 61.44e6)) {
+        // RX1 + RX2 enabled, 3, 1, 1, 2
+        _regs.rxfilt = B8(11100010);
+
+        // TX1 + TX2 enabled, 3, 1, 1, 1
+        _regs.txfilt = B8(11100001);
+
+        divfactor = 6;
+        _tfir_factor = 1;
+    } else {
+        // should never get in here
+        throw uhd::runtime_error("[ad9361_device_t] [_setup_rates] INVALID_CODE_PATH");
+    }
+
+    UHD_LOG << boost::format("[ad9361_device_t::_setup_rates] divfactor=%d\n") % divfactor;
+
+    /* Tune the BBPLL to get the ADC and DAC clocks. */
+    const double adcclk = _tune_bbvco(rate * divfactor);
+    double dacclk = adcclk;
+
+    /* The DAC clock must be <= 336e6, and is either the ADC clock or 1/2 the
+     * ADC clock.*/
+    if (adcclk > 336e6) {
+        /* Make the DAC clock = ADC/2, and bypass the TXFIR. */
+        _regs.bbpll = _regs.bbpll | 0x08;
+        dacclk = adcclk / 2.0;
+    } else {
+        _regs.bbpll = _regs.bbpll & 0xF7;
+    }
+
+    /* Set the dividers / interpolators in AD9361. */
+    _io_iface->poke8(0x002, _regs.txfilt);
+    _io_iface->poke8(0x003, _regs.rxfilt);
+    _io_iface->poke8(0x004, _regs.inputsel);
+    _io_iface->poke8(0x00A, _regs.bbpll);
+
+    UHD_LOG << boost::format("[ad9361_device_t::_setup_rates] adcclk=%f\n") % adcclk;
+    _baseband_bw = (adcclk / divfactor);
+
+    /*
+     The Tx & Rx FIR calculate 16 taps per clock cycle. This limits the number of available taps to the ratio of DAC_CLK/ADC_CLK
+     to the input data rate multiplied by 16. For example, if the input data rate is 25 MHz and DAC_CLK is 100 MHz,
+     then the ratio of DAC_CLK to the input data rate is 100/25 or 4. In this scenario, the total number of taps available is 64.
+
+     Also, whilst the Rx FIR filter always has memory available for 128 taps, the Tx FIR Filter can only support a maximum length of 64 taps
+     in 1x interpolation mode, and 128 taps in 2x & 4x modes.
+     */
+    const size_t max_tx_taps = std::min<size_t>(
+            std::min<size_t>((16 * (int)((dacclk / rate) + 0.5)), 128),
+            (_tfir_factor == 1) ? 64 : 128);
+    const size_t max_rx_taps = std::min<size_t>((16 * (size_t)((adcclk / rate) + 0.5)),
+            128);
+
+    const size_t num_tx_taps = get_num_taps(max_tx_taps);
+    const size_t num_rx_taps = get_num_taps(max_rx_taps);
+
+    _setup_tx_fir(num_tx_taps);
+    _setup_rx_fir(num_rx_taps);
+
+    return _baseband_bw;
+}
+
+/***********************************************************************
+ * Publicly exported functions to host calls
+ **********************************************************************/
+void ad9361_device_t::initialize()
+{
+    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
+
+    /* Initialize shadow registers. */
+    _regs.vcodivs = 0x00;
+    _regs.inputsel = 0x30;
+    _regs.rxfilt = 0x00;
+    _regs.txfilt = 0x00;
+    _regs.bbpll = 0x02;
+    _regs.bbftune_config = 0x1e;
+    _regs.bbftune_mode = 0x1e;
+
+    /* Initialize private VRQ fields. */
+    _rx_freq = 0.0;
+    _tx_freq = 0.0;
+    _req_rx_freq = 0.0;
+    _req_tx_freq = 0.0;
+    _baseband_bw = 0.0;
+    _req_clock_rate = 0.0;
+    _req_coreclk = 0.0;
+    _bbpll_freq = 0.0;
+    _adcclock_freq = 0.0;
+    _rx_bbf_tunediv = 0;
+    _curr_gain_table = 0;
+    _rx1_gain = 0;
+    _rx2_gain = 0;
+    _tx1_gain = 0;
+    _tx2_gain = 0;
+
+    /* Reset the device. */
+    _io_iface->poke8(0x000, 0x01);
+    _io_iface->poke8(0x000, 0x00);
+    boost::this_thread::sleep(boost::posix_time::milliseconds(20));
+
+    /* There is not a WAT big enough for this. */
+    _io_iface->poke8(0x3df, 0x01);
+
+    _io_iface->poke8(0x2a6, 0x0e); // Enable master bias
+    _io_iface->poke8(0x2a8, 0x0e); // Set bandgap trim
+
+    /* Set RFPLL ref clock scale to REFCLK * 2 */
+    _io_iface->poke8(0x2ab, 0x07);
+    _io_iface->poke8(0x2ac, 0xff);
+
+    /* Enable clocks. */
+    switch (_client_params->get_clocking_mode()) {
+    case AD9361_XTAL_N_CLK_PATH: {
+        _io_iface->poke8(0x009, 0x17);
+    } break;
+
+    case AD9361_XTAL_P_CLK_PATH: {
+        _io_iface->poke8(0x009, 0x07);
+        _io_iface->poke8(0x292, 0x08);
+        _io_iface->poke8(0x293, 0x80);
+        _io_iface->poke8(0x294, 0x00);
+        _io_iface->poke8(0x295, 0x14);
+    } break;
+
+    default:
+        throw uhd::runtime_error("[ad9361_device_t] NOT IMPLEMENTED");
+    }
+    boost::this_thread::sleep(boost::posix_time::milliseconds(20));
+
+    /* Tune the BBPLL, write TX and RX FIRS. */
+    _setup_rates(50e6);
+
+    /* Setup data ports (FDD dual port DDR):
+     *      FDD dual port DDR CMOS no swap.
+     *      Force TX on one port, RX on the other. */
+    switch (_client_params->get_digital_interface_mode()) {
+    case AD9361_DDR_FDD_LVCMOS: {
+        _io_iface->poke8(0x010, 0xc8);
+        _io_iface->poke8(0x011, 0x00);
+        _io_iface->poke8(0x012, 0x02);
+    } break;
+
+    case AD9361_DDR_FDD_LVDS: {
+        _io_iface->poke8(0x010, 0xcc);
+        _io_iface->poke8(0x011, 0x00);
+        _io_iface->poke8(0x012, 0x10);
+
+        //LVDS Specific
+        _io_iface->poke8(0x03C, 0x23);
+        _io_iface->poke8(0x03D, 0xFF);
+        _io_iface->poke8(0x03E, 0x0F);
+    } break;
+
+    default:
+        throw uhd::runtime_error("[ad9361_device_t] NOT IMPLEMENTED");
+    }
+
+    /* Data delay for TX and RX data clocks */
+    digital_interface_delays_t timing =
+            _client_params->get_digital_interface_timing();
+    boost::uint8_t rx_delays = ((timing.rx_clk_delay & 0xF) << 4)
+            | (timing.rx_data_delay & 0xF);
+    boost::uint8_t tx_delays = ((timing.tx_clk_delay & 0xF) << 4)
+            | (timing.tx_data_delay & 0xF);
+    _io_iface->poke8(0x006, rx_delays);
+    _io_iface->poke8(0x007, tx_delays);
+
+    /* Setup AuxDAC */
+    _io_iface->poke8(0x018, 0x00); // AuxDAC1 Word[9:2]
+    _io_iface->poke8(0x019, 0x00); // AuxDAC2 Word[9:2]
+    _io_iface->poke8(0x01A, 0x00); // AuxDAC1 Config and Word[1:0]
+    _io_iface->poke8(0x01B, 0x00); // AuxDAC2 Config and Word[1:0]
+    _io_iface->poke8(0x022, 0x4A); // Invert Bypassed LNA
+    _io_iface->poke8(0x023, 0xFF); // AuxDAC Manaul/Auto Control
+    _io_iface->poke8(0x026, 0x00); // AuxDAC Manual Select Bit/GPO Manual Select
+    _io_iface->poke8(0x030, 0x00); // AuxDAC1 Rx Delay
+    _io_iface->poke8(0x031, 0x00); // AuxDAC1 Tx Delay
+    _io_iface->poke8(0x032, 0x00); // AuxDAC2 Rx Delay
+    _io_iface->poke8(0x033, 0x00); // AuxDAC2 Tx Delay
+
+    /* Setup AuxADC */
+    _io_iface->poke8(0x00B, 0x00); // Temp Sensor Setup (Offset)
+    _io_iface->poke8(0x00C, 0x00); // Temp Sensor Setup (Temp Window)
+    _io_iface->poke8(0x00D, 0x03); // Temp Sensor Setup (Periodic Measure)
+    _io_iface->poke8(0x00F, 0x04); // Temp Sensor Setup (Decimation)
+    _io_iface->poke8(0x01C, 0x10); // AuxADC Setup (Clock Div)
+    _io_iface->poke8(0x01D, 0x01); // AuxADC Setup (Decimation/Enable)
+
+    /* Setup control outputs. */
+    _io_iface->poke8(0x035, 0x07);
+    _io_iface->poke8(0x036, 0xFF);
+
+    /* Setup GPO */
+    _io_iface->poke8(0x03a, 0x27); //set delay register
+    _io_iface->poke8(0x020, 0x00); // GPO Auto Enable Setup in RX and TX
+    _io_iface->poke8(0x027, 0x03); // GPO Manual and GPO auto value in ALERT
+    _io_iface->poke8(0x028, 0x00); // GPO_0 RX Delay
+    _io_iface->poke8(0x029, 0x00); // GPO_1 RX Delay
+    _io_iface->poke8(0x02A, 0x00); // GPO_2 RX Delay
+    _io_iface->poke8(0x02B, 0x00); // GPO_3 RX Delay
+    _io_iface->poke8(0x02C, 0x00); // GPO_0 TX Delay
+    _io_iface->poke8(0x02D, 0x00); // GPO_1 TX Delay
+    _io_iface->poke8(0x02E, 0x00); // GPO_2 TX Delay
+    _io_iface->poke8(0x02F, 0x00); // GPO_3 TX Delay
+
+    _io_iface->poke8(0x261, 0x00); // RX LO power
+    _io_iface->poke8(0x2a1, 0x00); // TX LO power
+    _io_iface->poke8(0x248, 0x0b); // en RX VCO LDO
+    _io_iface->poke8(0x288, 0x0b); // en TX VCO LDO
+    _io_iface->poke8(0x246, 0x02); // pd RX cal Tcf
+    _io_iface->poke8(0x286, 0x02); // pd TX cal Tcf
+    _io_iface->poke8(0x249, 0x8e); // rx vco cal length
+    _io_iface->poke8(0x289, 0x8e); // rx vco cal length
+    _io_iface->poke8(0x23b, 0x80); // set RX MSB?, FIXME 0x89 magic cp
+    _io_iface->poke8(0x27b, 0x80); // "" TX //FIXME 0x88 see above
+    _io_iface->poke8(0x243, 0x0d); // set rx prescaler bias
+    _io_iface->poke8(0x283, 0x0d); // "" TX
+
+    _io_iface->poke8(0x23d, 0x00); // Clear half VCO cal clock setting
+    _io_iface->poke8(0x27d, 0x00); // Clear half VCO cal clock setting
+
+    /* The order of the following process is EXTREMELY important. If the
+     * below functions are modified at all, device initialization and
+     * calibration might be broken in the process! */
+
+    _io_iface->poke8(0x015, 0x04); // dual synth mode, synth en ctrl en
+    _io_iface->poke8(0x014, 0x05); // use SPI for TXNRX ctrl, to ALERT, TX on
+    _io_iface->poke8(0x013, 0x01); // enable ENSM
+    boost::this_thread::sleep(boost::posix_time::milliseconds(1));
+
+    _calibrate_synth_charge_pumps();
+
+    _tune_helper(RX, 800e6);
+    _tune_helper(TX, 850e6);
+
+    _program_mixer_gm_subtable();
+    _program_gain_table();
+    _setup_gain_control();
+
+    _calibrate_baseband_rx_analog_filter();
+    _calibrate_baseband_tx_analog_filter();
+    _calibrate_rx_TIAs();
+    _calibrate_secondary_tx_filter();
+
+    _setup_adc();
+
+    _calibrate_tx_quadrature();
+    _calibrate_rx_quadrature();
+
+    // cals done, set PPORT config
+    switch (_client_params->get_digital_interface_mode()) {
+    case AD9361_DDR_FDD_LVCMOS: {
+        _io_iface->poke8(0x012, 0x02);
+    } break;
+
+    case AD9361_DDR_FDD_LVDS: {
+        _io_iface->poke8(0x012, 0x10);
+    } break;
+
+    default:
+        throw uhd::runtime_error("[ad9361_device_t] NOT IMPLEMENTED");
+    }
+
+    _io_iface->poke8(0x013, 0x01); // Set ENSM FDD bit
+    _io_iface->poke8(0x015, 0x04); // dual synth mode, synth en ctrl en
+
+    /* Default TX attentuation to 10dB on both TX1 and TX2 */
+    _io_iface->poke8(0x073, 0x00);
+    _io_iface->poke8(0x074, 0x00);
+    _io_iface->poke8(0x075, 0x00);
+    _io_iface->poke8(0x076, 0x00);
+
+    /* Setup RSSI Measurements */
+    _io_iface->poke8(0x150, 0x0E); // RSSI Measurement Duration 0, 1
+    _io_iface->poke8(0x151, 0x00); // RSSI Measurement Duration 2, 3
+    _io_iface->poke8(0x152, 0xFF); // RSSI Weighted Multiplier 0
+    _io_iface->poke8(0x153, 0x00); // RSSI Weighted Multiplier 1
+    _io_iface->poke8(0x154, 0x00); // RSSI Weighted Multiplier 2
+    _io_iface->poke8(0x155, 0x00); // RSSI Weighted Multiplier 3
+    _io_iface->poke8(0x156, 0x00); // RSSI Delay
+    _io_iface->poke8(0x157, 0x00); // RSSI Wait
+    _io_iface->poke8(0x158, 0x0D); // RSSI Mode Select
+    _io_iface->poke8(0x15C, 0x67); // Power Measurement Duration
+
+    /* Turn on the default RX & TX chains. */
+    set_active_chains(true, false, false, false);
+
+    /* Set TXers & RXers on (only works in FDD mode) */
+    _io_iface->poke8(0x014, 0x21);
+}
+
+
+/* This function sets the RX / TX rate between AD9361 and the FPGA, and
+ * thus determines the interpolation / decimation required in the FPGA to
+ * achieve the user's requested rate.
+ *
+ * This is the only clock setting function that is exposed to the outside. */
+double ad9361_device_t::set_clock_rate(const double req_rate)
+{
+    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
+
+    if (req_rate > 61.44e6) {
+        throw uhd::runtime_error("[ad9361_device_t] Requested master clock rate outside range");
+    }
+
+    UHD_LOG << boost::format("[ad9361_device_t::set_clock_rate] req_rate=%.10f\n") % req_rate;
+
+    /* UHD has a habit of requesting the same rate like four times when it
+     * starts up. This prevents that, and any bugs in user code that request
+     * the same rate over and over. */
+    if (freq_is_nearly_equal(req_rate, _req_clock_rate)) {
+        return _baseband_bw;
+    }
+
+    /* We must be in the SLEEP / WAIT state to do this. If we aren't already
+     * there, transition the ENSM to State 0. */
+    boost::uint8_t current_state = _io_iface->peek8(0x017) & 0x0F;
+    switch (current_state) {
+    case 0x05:
+        /* We are in the ALERT state. */
+        _io_iface->poke8(0x014, 0x21);
+        boost::this_thread::sleep(boost::posix_time::milliseconds(5));
+        _io_iface->poke8(0x014, 0x00);
+        break;
+
+    case 0x0A:
+        /* We are in the FDD state. */
+        _io_iface->poke8(0x014, 0x00);
+        break;
+
+    default:
+        throw uhd::runtime_error("[ad9361_device_t] [set_clock_rate:1] AD9361 in unknown state");
+        break;
+    };
+
+    /* Store the current chain / antenna selections so that we can restore
+     * them at the end of this routine; all chains will be enabled from
+     * within setup_rates for calibration purposes. */
+    boost::uint8_t orig_tx_chains = _regs.txfilt & 0xC0;
+    boost::uint8_t orig_rx_chains = _regs.rxfilt & 0xC0;
+
+    /* Call into the clock configuration / settings function. This is where
+     * all the hard work gets done. */
+    double rate = _setup_rates(req_rate);
+
+    UHD_LOG << boost::format("[ad9361_device_t::set_clock_rate] rate=%.10f\n") % rate;
+
+    /* Transition to the ALERT state and calibrate everything. */
+    _io_iface->poke8(0x015, 0x04); //dual synth mode, synth en ctrl en
+    _io_iface->poke8(0x014, 0x05); //use SPI for TXNRX ctrl, to ALERT, TX on
+    _io_iface->poke8(0x013, 0x01); //enable ENSM
+    boost::this_thread::sleep(boost::posix_time::milliseconds(1));
+
+    _calibrate_synth_charge_pumps();
+
+    _tune_helper(RX, _rx_freq);
+    _tune_helper(TX, _tx_freq);
+
+    _program_mixer_gm_subtable();
+    _program_gain_table();
+    _setup_gain_control();
+    _reprogram_gains();
+
+    _calibrate_baseband_rx_analog_filter();
+    _calibrate_baseband_tx_analog_filter();
+    _calibrate_rx_TIAs();
+    _calibrate_secondary_tx_filter();
+
+    _setup_adc();
+
+    _calibrate_tx_quadrature();
+    _calibrate_rx_quadrature();
+
+    // cals done, set PPORT config
+    switch (_client_params->get_digital_interface_mode()) {
+        case AD9361_DDR_FDD_LVCMOS: {
+            _io_iface->poke8(0x012, 0x02);
+        }break;
+
+        case AD9361_DDR_FDD_LVDS: {
+            _io_iface->poke8(0x012, 0x10);
+        }break;
+
+        default:
+        throw uhd::runtime_error("[ad9361_device_t] NOT IMPLEMENTED");
+    }
+    _io_iface->poke8(0x013, 0x01); // Set ENSM FDD bit
+    _io_iface->poke8(0x015, 0x04); // dual synth mode, synth en ctrl en
+
+    /* End the function in the same state as the entry state. */
+    switch (current_state) {
+    case 0x05:
+        /* We are already in ALERT. */
+        break;
+
+    case 0x0A:
+        /* Transition back to FDD, and restore the original antenna
+         * / chain selections. */
+        _regs.txfilt = (_regs.txfilt & 0x3F) | orig_tx_chains;
+        _regs.rxfilt = (_regs.rxfilt & 0x3F) | orig_rx_chains;
+
+        _io_iface->poke8(0x002, _regs.txfilt);
+        _io_iface->poke8(0x003, _regs.rxfilt);
+        _io_iface->poke8(0x014, 0x21);
+        break;
+
+    default:
+        throw uhd::runtime_error("[ad9361_device_t] [set_clock_rate:2] AD9361 in unknown state");
+        break;
+    };
+
+    return rate;
+}
+
+
+/* Set which of the four TX / RX chains provided by AD9361 are active.
+ *
+ * AD9361 provides two sets of chains, Side A and Side B. Each side
+ * provides one TX antenna, and one RX antenna. The B200 maintains the USRP
+ * standard of providing one antenna connection that is both TX & RX, and
+ * one that is RX-only - for each chain. Thus, the possible antenna and
+ * chain selections are:
+ *
+ *  B200 Antenna    AD9361 Side       AD9361 Chain
+ *  -------------------------------------------------------------------
+ *  TX / RX1        Side A              TX1 (when switched to TX)
+ *  TX / RX1        Side A              RX1 (when switched to RX)
+ *  RX1             Side A              RX1
+ *
+ *  TX / RX2        Side B              TX2 (when switched to TX)
+ *  TX / RX2        Side B              RX2 (when switched to RX)
+ *  RX2             Side B              RX2
+ */
+void ad9361_device_t::set_active_chains(bool tx1, bool tx2, bool rx1, bool rx2)
+{
+    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
+
+    /* Clear out the current active chain settings. */
+    _regs.txfilt = _regs.txfilt & 0x3F;
+    _regs.rxfilt = _regs.rxfilt & 0x3F;
+
+    /* Turn on the different chains based on the passed parameters. */
+    if (tx1) {
+        _regs.txfilt = _regs.txfilt | 0x40;
+    }
+    if (tx2) {
+        _regs.txfilt = _regs.txfilt | 0x80;
+    }
+    if (rx1) {
+        _regs.rxfilt = _regs.rxfilt | 0x40;
+    }
+    if (rx2) {
+        _regs.rxfilt = _regs.rxfilt | 0x80;
+    }
+
+    /* Check for FDD state */
+    boost::uint8_t set_back_to_fdd = 0;
+    boost::uint8_t ensm_state = _io_iface->peek8(0x017) & 0x0F;
+    if (ensm_state == 0xA)   // FDD
+            {
+        /* Put into ALERT state (via the FDD flush state). */
+        _io_iface->poke8(0x014, 0x01);
+        set_back_to_fdd = 1;
+    }
+
+    /* Wait for FDD flush state to complete (if necessary) */
+    while (ensm_state == 0xA || ensm_state == 0xB)
+        ensm_state = _io_iface->peek8(0x017) & 0x0F;
+
+    /* Turn on / off the chains. */
+    _io_iface->poke8(0x002, _regs.txfilt);
+    _io_iface->poke8(0x003, _regs.rxfilt);
+
+    /* Put back into FDD state if necessary */
+    if (set_back_to_fdd)
+        _io_iface->poke8(0x014, 0x21);
+}
+
+/* Tune the RX or TX frequency.
+ *
+ * This is the publicly-accessible tune function. It makes sure the tune
+ * isn't a redundant request, and if not, passes it on to the class's
+ * internal tune function.
+ *
+ * After tuning, it runs any appropriate calibrations. */
+double ad9361_device_t::tune(direction_t direction, const double value)
+{
+    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
+
+    if (direction == RX) {
+        if (freq_is_nearly_equal(value, _req_rx_freq)) {
+            return _rx_freq;
+        }
+
+    } else if (direction == TX) {
+        if (freq_is_nearly_equal(value, _req_tx_freq)) {
+            return _tx_freq;
+        }
+
+    } else {
+        throw uhd::runtime_error("[ad9361_device_t] [tune] INVALID_CODE_PATH");
+    }
+
+    /* If we aren't already in the ALERT state, we will need to return to
+     * the FDD state after tuning. */
+    int not_in_alert = 0;
+    if ((_io_iface->peek8(0x017) & 0x0F) != 5) {
+        /* Force the device into the ALERT state. */
+        not_in_alert = 1;
+        _io_iface->poke8(0x014, 0x01);
+    }
+
+    /* Tune the RF VCO! */
+    double tune_freq = _tune_helper(direction, value);
+
+    /* Run any necessary calibrations / setups */
+    if (direction == RX) {
+        _program_gain_table();
+    }
+
+    /* Update the gain settings. */
+    _reprogram_gains();
+
+    /* Run the calibration algorithms. */
+    _calibrate_tx_quadrature();
+    _calibrate_rx_quadrature();
+
+    /* If we were in the FDD state, return it now. */
+    if (not_in_alert) {
+        _io_iface->poke8(0x014, 0x21);
+    }
+
+    return tune_freq;
+}
+
+/* Set the gain of RX1, RX2, TX1, or TX2.
+ *
+ * Note that the 'value' passed to this function is the actual gain value,
+ * _not_ the gain index. This is the opposite of the eval software's GUI!
+ * Also note that the RX chains are done in terms of gain, and the TX chains
+ * are done in terms of attenuation. */
+double ad9361_device_t::set_gain(direction_t direction, chain_t chain, const double value)
+{
+    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
+
+    if (direction == RX) {
+        /* Indexing the gain tables requires an offset from the requested
+         * amount of total gain in dB:
+         *      < 1300MHz: dB + 5
+         *      >= 1300MHz and < 4000MHz: dB + 3
+         *      >= 4000MHz and <= 6000MHz: dB + 14
+         */
+        int gain_offset = 0;
+        if (_rx_freq < 1300e6) {
+            gain_offset = 5;
+        } else if (_rx_freq < 4000e6) {
+            gain_offset = 3;
+        } else {
+            gain_offset = 14;
+        }
+
+        int gain_index = static_cast<int>(value + gain_offset);
+
+        /* Clip the gain values to the proper min/max gain values. */
+        if (gain_index > 76)
+            gain_index = 76;
+        if (gain_index < 0)
+            gain_index = 0;
+
+        if (chain == CHAIN_1) {
+            _rx1_gain = boost::uint32_t(value);
+            _io_iface->poke8(0x109, gain_index);
+        } else {
+            _rx2_gain = boost::uint32_t(value);
+            _io_iface->poke8(0x10c, gain_index);
+        }
+
+        return gain_index - gain_offset;
+    } else {
+        /* Setting the below bits causes a change in the TX attenuation word
+         * to immediately take effect. */
+        _io_iface->poke8(0x077, 0x40);
+        _io_iface->poke8(0x07c, 0x40);
+
+        /* Each gain step is -0.25dB. Calculate the attenuation necessary
+         * for the requested gain, convert it into gain steps, then write
+         * the attenuation word. Max gain (so zero attenuation) is 89.75. */
+        double atten = AD9361_MAX_GAIN - value;
+        boost::uint32_t attenreg = boost::uint32_t(atten * 4);
+        if (chain == CHAIN_1) {
+            _tx1_gain = boost::uint32_t(value);
+            _io_iface->poke8(0x073, attenreg & 0xFF);
+            _io_iface->poke8(0x074, (attenreg >> 8) & 0x01);
+        } else {
+            _tx2_gain = boost::uint32_t(value);
+            _io_iface->poke8(0x075, attenreg & 0xFF);
+            _io_iface->poke8(0x076, (attenreg >> 8) & 0x01);
+        }
+        return AD9361_MAX_GAIN - ((double) (attenreg) / 4);
+    }
+}
+
+void ad9361_device_t::output_test_tone()
+{
+    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
+    /* Output a 480 kHz tone at 800 MHz */
+    _io_iface->poke8(0x3F4, 0x0B);
+    _io_iface->poke8(0x3FC, 0xFF);
+    _io_iface->poke8(0x3FD, 0xFF);
+    _io_iface->poke8(0x3FE, 0x3F);
+}
+
+void ad9361_device_t::data_port_loopback(const bool loopback_enabled)
+{
+    boost::lock_guard<boost::recursive_mutex> lock(_mutex);
+    _io_iface->poke8(0x3F5, (loopback_enabled ? 0x01 : 0x00));
+}
+
+}}
diff --git a/host/lib/usrp/common/ad9361_driver/ad9361_device.h b/host/lib/usrp/common/ad9361_driver/ad9361_device.h
index 2d067fa7d..5770f332a 100644
--- a/host/lib/usrp/common/ad9361_driver/ad9361_device.h
+++ b/host/lib/usrp/common/ad9361_driver/ad9361_device.h
@@ -1,125 +1,125 @@
-//
-// Copyright 2014 Ettus Research LLC
-//
-
-#ifndef INCLUDED_AD9361_DEVICE_H
-#define INCLUDED_AD9361_DEVICE_H
-
-#include <ad9361_client.h>
-#include <boost/noncopyable.hpp>
-#include <boost/thread/recursive_mutex.hpp>
-
-namespace uhd { namespace usrp {
-
-class ad9361_device_t : public boost::noncopyable
-{
-public:
-    enum direction_t { RX, TX };
-    enum chain_t { CHAIN_1, CHAIN_2 };
-
-    ad9361_device_t(ad9361_params::sptr client, ad9361_io::sptr io_iface) :
-        _client_params(client), _io_iface(io_iface) {}
-
-    /* Initialize the AD9361 codec. */
-    void initialize();
-
-    /* This function sets the RX / TX rate between AD9361 and the FPGA, and
-     * thus determines the interpolation / decimation required in the FPGA to
-     * achieve the user's requested rate.
-     */
-    double set_clock_rate(const double req_rate);
-
-    /* Set which of the four TX / RX chains provided by AD9361 are active.
-     *
-     * AD9361 provides two sets of chains, Side A and Side B. Each side
-     * provides one TX antenna, and one RX antenna. The B200 maintains the USRP
-     * standard of providing one antenna connection that is both TX & RX, and
-     * one that is RX-only - for each chain. Thus, the possible antenna and
-     * chain selections are:
-     *
-     */
-    void set_active_chains(bool tx1, bool tx2, bool rx1, bool rx2);
-
-    /* Tune the RX or TX frequency.
-     *
-     * This is the publicly-accessible tune function. It makes sure the tune
-     * isn't a redundant request, and if not, passes it on to the class's
-     * internal tune function.
-     *
-     * After tuning, it runs any appropriate calibrations. */
-    double tune(direction_t direction, const double value);
-
-    /* Set the gain of RX1, RX2, TX1, or TX2.
-     *
-     * Note that the 'value' passed to this function is the actual gain value,
-     * _not_ the gain index. This is the opposite of the eval software's GUI!
-     * Also note that the RX chains are done in terms of gain, and the TX chains
-     * are done in terms of attenuation. */
-    double set_gain(direction_t direction, chain_t chain, const double value);
-
-    /* Make AD9361 output its test tone. */
-    void output_test_tone();
-
-    /* Turn on/off AD9361's TX port --> RX port loopback. */
-    void data_port_loopback(const bool loopback_enabled);
-
-    //Constants
-    static const double AD9361_MAX_GAIN         = 89.75;
-    static const double AD9361_MAX_CLOCK_RATE   = 61.44e6;
-
-private:    //Methods
-    void _program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs);
-    void _setup_tx_fir(size_t num_taps);
-    void _setup_rx_fir(size_t num_taps);
-    void _calibrate_lock_bbpll();
-    void _calibrate_synth_charge_pumps();
-    double _calibrate_baseband_rx_analog_filter();
-    double _calibrate_baseband_tx_analog_filter();
-    void _calibrate_secondary_tx_filter();
-    void _calibrate_rx_TIAs();
-    void _setup_adc();
-    void _calibrate_baseband_dc_offset();
-    void _calibrate_rf_dc_offset();
-    void _calibrate_rx_quadrature();
-    void _tx_quadrature_cal_routine();
-    void _calibrate_tx_quadrature();
-    void _program_mixer_gm_subtable();
-    void _program_gain_table();
-    void _setup_gain_control();
-    void _setup_synth(direction_t direction, double vcorate);
-    double _tune_bbvco(const double rate);
-    void _reprogram_gains();
-    double _tune_helper(direction_t direction, const double value);
-    double _setup_rates(const double rate);
-
-private:    //Members
-    typedef struct {
-        boost::uint8_t vcodivs;
-        boost::uint8_t inputsel;
-        boost::uint8_t rxfilt;
-        boost::uint8_t txfilt;
-        boost::uint8_t bbpll;
-        boost::uint8_t bbftune_config;
-        boost::uint8_t bbftune_mode;
-    } chip_regs_t;
-
-    //Interfaces
-    ad9361_params::sptr _client_params;
-    ad9361_io::sptr     _io_iface;
-    //Intermediate state
-    double              _rx_freq, _tx_freq, _req_rx_freq, _req_tx_freq;
-    double              _baseband_bw, _bbpll_freq, _adcclock_freq;
-    double              _req_clock_rate, _req_coreclk;
-    boost::uint16_t     _rx_bbf_tunediv;
-    boost::uint8_t      _curr_gain_table;
-    boost::uint32_t     _rx1_gain, _rx2_gain, _tx1_gain, _tx2_gain;
-    boost::int32_t      _tfir_factor;
-    //Register soft-copies
-    chip_regs_t         _regs;
-    //Synchronization
-    boost::recursive_mutex  _mutex;
-};
-
-}}  //namespace
-
-#endif /* INCLUDED_AD9361_DEVICE_H */
+//
+// Copyright 2014 Ettus Research LLC
+//
+
+#ifndef INCLUDED_AD9361_DEVICE_H
+#define INCLUDED_AD9361_DEVICE_H
+
+#include <ad9361_client.h>
+#include <boost/noncopyable.hpp>
+#include <boost/thread/recursive_mutex.hpp>
+
+namespace uhd { namespace usrp {
+
+class ad9361_device_t : public boost::noncopyable
+{
+public:
+    enum direction_t { RX, TX };
+    enum chain_t { CHAIN_1, CHAIN_2 };
+
+    ad9361_device_t(ad9361_params::sptr client, ad9361_io::sptr io_iface) :
+        _client_params(client), _io_iface(io_iface) {}
+
+    /* Initialize the AD9361 codec. */
+    void initialize();
+
+    /* This function sets the RX / TX rate between AD9361 and the FPGA, and
+     * thus determines the interpolation / decimation required in the FPGA to
+     * achieve the user's requested rate.
+     */
+    double set_clock_rate(const double req_rate);
+
+    /* Set which of the four TX / RX chains provided by AD9361 are active.
+     *
+     * AD9361 provides two sets of chains, Side A and Side B. Each side
+     * provides one TX antenna, and one RX antenna. The B200 maintains the USRP
+     * standard of providing one antenna connection that is both TX & RX, and
+     * one that is RX-only - for each chain. Thus, the possible antenna and
+     * chain selections are:
+     *
+     */
+    void set_active_chains(bool tx1, bool tx2, bool rx1, bool rx2);
+
+    /* Tune the RX or TX frequency.
+     *
+     * This is the publicly-accessible tune function. It makes sure the tune
+     * isn't a redundant request, and if not, passes it on to the class's
+     * internal tune function.
+     *
+     * After tuning, it runs any appropriate calibrations. */
+    double tune(direction_t direction, const double value);
+
+    /* Set the gain of RX1, RX2, TX1, or TX2.
+     *
+     * Note that the 'value' passed to this function is the actual gain value,
+     * _not_ the gain index. This is the opposite of the eval software's GUI!
+     * Also note that the RX chains are done in terms of gain, and the TX chains
+     * are done in terms of attenuation. */
+    double set_gain(direction_t direction, chain_t chain, const double value);
+
+    /* Make AD9361 output its test tone. */
+    void output_test_tone();
+
+    /* Turn on/off AD9361's TX port --> RX port loopback. */
+    void data_port_loopback(const bool loopback_enabled);
+
+    //Constants
+    static const double AD9361_MAX_GAIN;
+    static const double AD9361_MAX_CLOCK_RATE;
+
+private:    //Methods
+    void _program_fir_filter(direction_t direction, int num_taps, boost::uint16_t *coeffs);
+    void _setup_tx_fir(size_t num_taps);
+    void _setup_rx_fir(size_t num_taps);
+    void _calibrate_lock_bbpll();
+    void _calibrate_synth_charge_pumps();
+    double _calibrate_baseband_rx_analog_filter();
+    double _calibrate_baseband_tx_analog_filter();
+    void _calibrate_secondary_tx_filter();
+    void _calibrate_rx_TIAs();
+    void _setup_adc();
+    void _calibrate_baseband_dc_offset();
+    void _calibrate_rf_dc_offset();
+    void _calibrate_rx_quadrature();
+    void _tx_quadrature_cal_routine();
+    void _calibrate_tx_quadrature();
+    void _program_mixer_gm_subtable();
+    void _program_gain_table();
+    void _setup_gain_control();
+    void _setup_synth(direction_t direction, double vcorate);
+    double _tune_bbvco(const double rate);
+    void _reprogram_gains();
+    double _tune_helper(direction_t direction, const double value);
+    double _setup_rates(const double rate);
+
+private:    //Members
+    typedef struct {
+        boost::uint8_t vcodivs;
+        boost::uint8_t inputsel;
+        boost::uint8_t rxfilt;
+        boost::uint8_t txfilt;
+        boost::uint8_t bbpll;
+        boost::uint8_t bbftune_config;
+        boost::uint8_t bbftune_mode;
+    } chip_regs_t;
+
+    //Interfaces
+    ad9361_params::sptr _client_params;
+    ad9361_io::sptr     _io_iface;
+    //Intermediate state
+    double              _rx_freq, _tx_freq, _req_rx_freq, _req_tx_freq;
+    double              _baseband_bw, _bbpll_freq, _adcclock_freq;
+    double              _req_clock_rate, _req_coreclk;
+    boost::uint16_t     _rx_bbf_tunediv;
+    boost::uint8_t      _curr_gain_table;
+    boost::uint32_t     _rx1_gain, _rx2_gain, _tx1_gain, _tx2_gain;
+    boost::int32_t      _tfir_factor;
+    //Register soft-copies
+    chip_regs_t         _regs;
+    //Synchronization
+    boost::recursive_mutex  _mutex;
+};
+
+}}  //namespace
+
+#endif /* INCLUDED_AD9361_DEVICE_H */
-- 
cgit v1.2.3