From b0b5d56a0885a74e31b5d3bbf52ab7d1124405b5 Mon Sep 17 00:00:00 2001
From: Moritz Fischer <moritz@ettus.com>
Date: Tue, 20 Jan 2015 20:06:05 +0100
Subject: e300: gps: Replace misleading 'GPSDO' with 'GPS'.
Signed-off-by: Moritz Fischer <moritz@ettus.com>
---
host/docs/usrp_e3x0.dox | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
(limited to 'host/docs')
diff --git a/host/docs/usrp_e3x0.dox b/host/docs/usrp_e3x0.dox
index ebe02627a..f4c9df06c 100644
--- a/host/docs/usrp_e3x0.dox
+++ b/host/docs/usrp_e3x0.dox
@@ -11,7 +11,7 @@
- Configurable clock rate
- Internal GPIO connector with UHD API control
- 2 USB 2.0 Host ports
- - Internal GPSDO
+ - Internal GPS
- Soundcard mono input / stereo output
- USB UART
- Zynq-7020 FPGA
@@ -284,9 +284,9 @@ To test the PPS input, you can use the following tool from the UHD examples:
cd <install-path>/lib/uhd/examples
./test_pps_input --args=\<args\>
-\subsection e3x0_hw_gpsdo Internal GPSDO
+\subsection e3x0_hw_gps Internal GPS
-Your USRP-E Series device comes with an internal GPSDO.
+Your USRP-E Series device comes with an internal GPS.
In order to get a lock on a satellite an external GPS antenna is required.
The device provides a 3.3V supply voltage to an external antenna connected to the *GPS* port
@@ -397,7 +397,7 @@ they can be queried through the API.
- **fe_locked** - rx / tx frontend pll locked
- **temp** - processor temperature value
-- **gps_time** and **gps_locked** sensors are added when the GPSDO is found
+- **gps_time** and **gps_locked** sensors are added when the GPS is found
\subsection e3x0_network_mode Network Mode
--
cgit v1.2.3