From 5ea461396e3dbb84442812a8df1dd3d8b956dc68 Mon Sep 17 00:00:00 2001 From: Jason Abele Date: Tue, 1 Jun 2010 17:35:57 -0700 Subject: Updated documentation --- host/docs/dboards.rst | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-) (limited to 'host/docs') diff --git a/host/docs/dboards.rst b/host/docs/dboards.rst index a320f86cb..e14f49933 100644 --- a/host/docs/dboards.rst +++ b/host/docs/dboards.rst @@ -45,6 +45,8 @@ The user may set the receive antenna to be TX/RX or RX2. However, when using an RFX board in full-duplex mode, the receive antenna will always be set to RX2, regardless of the settings. +Recieve Gains: **PGA0**, Range: 0-45dB + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ XCVR 2450 ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -63,6 +65,14 @@ The XCVR2450 uses a common LO for both receive and transmit. Even though the API allows the RX and TX LOs to be individually set, a change of one LO setting will be reflected in the other LO setting. +Transmit Gains: + * **VGA**, Range: 0-30dB + * **BB**, Range: 0-5dB + +Recieve Gains: + * **LNA**, Range: 0-30.5dB + * **VGA**, Range: 0-62dB + ^^^^^^^^^^^^^^^^^^^^^^^^^^^ WBX Series ^^^^^^^^^^^^^^^^^^^^^^^^^^^ @@ -71,5 +81,9 @@ Transmit Antennas: **TX/RX** Receive Antennas: **TX/RX** or **RX2** The user may set the receive antenna to be TX/RX or RX2. -However, when using an RFX board in full-duplex mode, +However, when using an WBX board in full-duplex mode, the receive antenna will always be set to RX2, regardless of the settings. + +Transmit Gains: **PGA0**, Range: 0-25dB + +Recieve Gains: **PGA0**, Range: 0-31.5dB -- cgit v1.2.3