From 97d71375fffe88ee89b10ba0a125d106738f9e7b Mon Sep 17 00:00:00 2001 From: Moritz Fischer Date: Wed, 22 Jul 2015 11:36:26 -0700 Subject: e3xx: doc: Explain autoboot configuration. Firmware Revision 2.0 introduced the possibility to configure the power on behavior. This documents how to configure it through sysfs. Signed-off-by: Moritz Fischer --- host/docs/usrp_e3x0.dox | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'host/docs/usrp_e3x0.dox') diff --git a/host/docs/usrp_e3x0.dox b/host/docs/usrp_e3x0.dox index 86ce93be4..7479c584d 100644 --- a/host/docs/usrp_e3x0.dox +++ b/host/docs/usrp_e3x0.dox @@ -283,6 +283,7 @@ It's behavior is firmware version dependent. + 1 - Low voltage error + 2 - Regulator low voltage error + 3 - FPGA power error + + 4 - DRAM power error + 5 - 1.8V rail power error + 6 - 3.3V rail power error + 7 - Daughterboard / TX power error @@ -746,6 +747,16 @@ by pinging the USRP and making sure the LEDs start to blink. In the file `/etc/ssh/sshd_config`, uncomment the line \#`X11Forwarding no` and change "no" to "yes". + - Firmware + -# With Firmware 2.0 the device no longer turns on when AC power is plugged.
+ This setting can be adjusted via `/sys/devices/axi_pmu.3/autoboot`. + + Using `$ echo 1 > /sys/devices/axi_pmu.3/autoboot` autoboot is turned on. + + Using `$ echo 0 > /sys/devices/axi_pmu.3/autoboot` autoboot is turned off. + + Note that the path above is subject to change depending on device tree changes. + \section e3x0_apps Applications \subsection e3x0_apps_gsm GSM Base Station -- cgit v1.2.3