From 2acddaccbde707afe8c28f183bb4418947384786 Mon Sep 17 00:00:00 2001 From: Nicholas Corgan Date: Tue, 18 Dec 2012 15:47:17 -0800 Subject: docs: UHD/USRP rephrasing --- host/docs/usrp_b100.rst | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'host/docs/usrp_b100.rst') diff --git a/host/docs/usrp_b100.rst b/host/docs/usrp_b100.rst index cdb853b61..b5dc79b50 100644 --- a/host/docs/usrp_b100.rst +++ b/host/docs/usrp_b100.rst @@ -21,7 +21,7 @@ Comparative features list ------------------------------------------------------------------------ Specify a Non-standard Image ------------------------------------------------------------------------ -UHD will automatically select the USRP B-Series images from the installed images package. +UHD software will automatically select the USRP B-Series images from the installed images package. The image selection can be overridden with the **--fpga=** and **--fw=** device address parameters. Example device address string representations to specify non-standard images: @@ -54,7 +54,7 @@ and X4 must be populated with a 61.44 MHz oscillator. * **J15** is a three pin header, move the jumper to (pin1, pin2) * **357LB3I061M4400** is the recommended oscillator for X4 -**Note:** See instructions below to communicate the desired clock rate into UHD. +**Note:** See instructions below to communicate the desired clock rate into UHD software. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Set other rates - uses internal VCO @@ -63,7 +63,7 @@ To use other clock rates, the jumper will need to be in the default position. * **J15** is a three pin header, move the jumper to (pin2, pin3) -To communicate the desired clock rate into UHD, +To communicate the desired clock rate into UHD software, specify the a special device address argument, where the key is **master_clock_rate** and the value is a rate in Hz. Example: -- cgit v1.2.3