From c311cdf67ebbf5c46c66c906c3b91162ddc84e25 Mon Sep 17 00:00:00 2001 From: Tom Tsou Date: Fri, 4 Sep 2015 12:56:32 -0700 Subject: docs: Update WBX phase sync capability Assume after retune that WBX phase ambiguity is unknown. WBX daughterboard guarantees 180 phase ambiguity for some, but not all, frequencies. Signed-off-by: Tom Tsou --- host/docs/sync.dox | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'host/docs/sync.dox') diff --git a/host/docs/sync.dox b/host/docs/sync.dox index aaae88702..59f849e1a 100644 --- a/host/docs/sync.dox +++ b/host/docs/sync.dox @@ -152,7 +152,7 @@ metadata should have a time spec set: : size_t num_tx_samps = tx_streamer->send(buffs, samps_to_send, md); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -\subsection sync_phase_lo Align LOs in the front-end (SBX, WBX, UBX) +\subsection sync_phase_lo Align LOs in the front-end (SBX, UBX) Using timed commands, multiple frontends can be tuned at a specific time. This timed-tuning ensures that the phase offsets between VCO/PLL @@ -161,7 +161,6 @@ chains will remain constant after each re-tune. See notes below: - There is a random phase offset between any two frontends - This phase offset is different for different LO frequencies - This phase offset remains constant after retuning - - Due to a divider, WBX phase offset will be randomly +/- 180 deg after re-tune on all USRPs. - Due to a divider, UBX phase offset will be randomly +/- 180 deg after re-tune on N200/N210. On X300/X310, phase sync with UBX fully works. - This phase offset will drift over time due to thermal and other characteristics -- cgit v1.2.3