From 90933d9b2faf392fd26f3f7ca32f73719614a40a Mon Sep 17 00:00:00 2001
From: Wade Fife <wade.fife@ettus.com>
Date: Fri, 15 May 2020 14:04:38 -0500
Subject: fpga: tools: Add contents of directories for HDL source

For HLS builds, the output file names aren't known in advance. This
makes it difficult to write the Makefile to pull in the files and pass
them to the build tools. This change allows you to add a directory as
your HDL source so that all files in the directory will be pulled in by
the build process.
---
 fpga/usrp3/tools/scripts/viv_sim_project.tcl | 20 ++++++++++++++++----
 fpga/usrp3/tools/scripts/viv_utils.tcl       |  9 +++++++++
 2 files changed, 25 insertions(+), 4 deletions(-)

(limited to 'fpga/usrp3/tools/scripts')

diff --git a/fpga/usrp3/tools/scripts/viv_sim_project.tcl b/fpga/usrp3/tools/scripts/viv_sim_project.tcl
index b524e332c..922c1edcc 100644
--- a/fpga/usrp3/tools/scripts/viv_sim_project.tcl
+++ b/fpga/usrp3/tools/scripts/viv_sim_project.tcl
@@ -40,6 +40,15 @@ if [expr ([string equal $simulator "XSim"] == 0) && ([string length $sim_complib
 puts "BUILDER: Creating Vivado simulation project part $part_name"
 create_project -part $part_name -force $project_name/$project_name
 
+# Expand directories to include their contents (needed for HLS outputs)
+foreach src_file $design_srcs {
+    if [expr [file isdirectory $src_file] == 1] {
+        puts "BUILDER: Expanding Directory : $src_file"
+        set dir_contents [glob $src_file/*.*]
+        append design_srcs " " $dir_contents
+    }
+}
+
 foreach src_file $design_srcs {
     set src_ext [file extension $src_file ]
     if [expr [lsearch {.vhd .vhdl} $src_ext] >= 0] {
@@ -60,12 +69,15 @@ foreach src_file $design_srcs {
     } elseif [expr [lsearch {.ngc .edif} $src_ext] >= 0] {
         puts "BUILDER: Adding Netlist : $src_file"
         read_edif $src_file
+    } elseif [expr [lsearch {.dat} $src_ext] >= 0] {
+        puts "BUILDER: Adding Data File : $src_file"
+        add_files -fileset $sim_fileset -norecurse $src_file
     } elseif [expr [lsearch {.bd} $src_ext] >= 0] {
-            puts "BUILDER: Adding Block Diagram: $src_file"
-            add_files -norecurse $src_file
+        puts "BUILDER: Adding Block Diagram: $src_file"
+        add_files -norecurse $src_file
     } elseif [expr [lsearch {.bxml} $src_ext] >= 0] {
-            puts "BUILDER: Adding Block Diagram XML: $src_file"
-            add_files -norecurse $src_file
+        puts "BUILDER: Adding Block Diagram XML: $src_file"
+        add_files -norecurse $src_file
     } else {
         puts "BUILDER: \[WARNING\] File ignored!!!: $src_file"
     }
diff --git a/fpga/usrp3/tools/scripts/viv_utils.tcl b/fpga/usrp3/tools/scripts/viv_utils.tcl
index 8f34df6f5..9ced39edf 100644
--- a/fpga/usrp3/tools/scripts/viv_utils.tcl
+++ b/fpga/usrp3/tools/scripts/viv_utils.tcl
@@ -59,6 +59,15 @@ proc ::vivado_utils::initialize_project { {save_to_disk 0} } {
         create_project -in_memory -part $g_part_name
     }
 
+    # Expand directories to include their contents (needed for HLS outputs)
+    foreach src_file $g_source_files {
+        if [expr [file isdirectory $src_file] == 1] {
+            puts "BUILDER: Expanding Directory : $src_file"
+            set dir_contents [glob $src_file/*.*]
+            append design_srcs " " $dir_contents
+        }
+    }
+
     foreach src_file $g_source_files {
         set src_ext [file extension $src_file ]
         if [expr [lsearch {.vhd .vhdl} $src_ext] >= 0] {
-- 
cgit v1.2.3