From 0df4b801a34697f2058b4a7b95e08d2a0576c9db Mon Sep 17 00:00:00 2001 From: Ben Hilburn Date: Thu, 10 Oct 2013 10:17:27 -0700 Subject: Squashed B200 FPGA Source. Code from Josh Blum, Ian Buckley, and Matt Ettus. --- fpga/usrp3/lib/packet_proc/vita_eth_framer.v | 137 +++++++++++++++++++++++++++ 1 file changed, 137 insertions(+) create mode 100644 fpga/usrp3/lib/packet_proc/vita_eth_framer.v (limited to 'fpga/usrp3/lib/packet_proc/vita_eth_framer.v') diff --git a/fpga/usrp3/lib/packet_proc/vita_eth_framer.v b/fpga/usrp3/lib/packet_proc/vita_eth_framer.v new file mode 100644 index 000000000..a5e02e899 --- /dev/null +++ b/fpga/usrp3/lib/packet_proc/vita_eth_framer.v @@ -0,0 +1,137 @@ + +// vita_eth_framer +// Takes a vita stream in and adds udp, ip, and ethernet framing +// Uses 8 setting reg addresses. First 4 are simple registers: +// BASE+0 : Upper 16 bits of ethernet src mac +// BASE+1 : Lower 32 bits of ethernet src mac +// BASE+2 : IP src address +// BASE+3 : UDP src port +// +// Next 4 control write ports on a RAM indexed by destination field of stream ID +// BASE+4 : Dest SID for next 3 regs +// BASE+5 : Dest IP +// BASE+6 : Dest UDP port, upper 16 bits of dest mac +// BASE+7 : Lower 32 bits of dest mac + +module vita_eth_framer + #(parameter BASE=0) + (input clk, input reset, input clear, + input set_stb, input [7:0] set_addr, input [31:0] set_data, + input [63:0] in_tdata, input in_tlast, input in_tvalid, output in_tready, + output [63:0] out_tdata, output [3:0] out_tuser, output out_tlast, output out_tvalid, input out_tready, + output [31:0] debug ); + + localparam SR_AWIDTH = 8; + + reg [31:0] sid; + reg [15:0] vita_len; + + reg [2:0] vef_state; + localparam VEF_IDLE = 3'd0; + localparam VEF_PAYLOAD = 3'd7; + + reg [63:0] tdata; + + always @(posedge clk) + if(reset | clear) + begin + vef_state <= VEF_IDLE; + sid <= 32'd0; + vita_len <= 16'd0; + end + else + case(vef_state) + VEF_IDLE : + if(in_tvalid) + begin + vef_state <= 1; + sid <= in_tdata[31:0]; + vita_len <= in_tdata[47:32]; + end + VEF_PAYLOAD : + if(in_tvalid & out_tready) + if(in_tlast) + vef_state <= VEF_IDLE; + default : + if(out_tready) + vef_state <= vef_state + 3'd1; + endcase // case (vef_state) + + assign in_tready = (vef_state == VEF_PAYLOAD) ? out_tready : 1'b0; + assign out_tvalid = (vef_state == VEF_PAYLOAD) ? in_tvalid : (vef_state == VEF_IDLE) ? 1'b0 : 1'b1; + assign out_tlast = (vef_state == VEF_PAYLOAD) ? in_tlast : 1'b0; + assign out_tuser = ((vef_state == VEF_PAYLOAD) & in_tlast) ? {1'b0,vita_len[0],2'b00} : 4'b0000; + assign out_tdata = tdata; + + wire [15:0] vita_len_in_bytes = {vita_len[13:0],2'b00}; // Vita length is in 32-bit words + + wire [47:0] pad = 48'h0; + wire [47:0] mac_src, mac_dst; + wire [15:0] eth_type = 16'h0800; + wire [15:0] misc_ip = { 4'd4 /* IPv4 */, 4'd5 /* IP HDR Len */, 8'h00 /* DSCP and ECN */}; + wire [15:0] ip_len = (16'd28 + vita_len_in_bytes); // 20 for IP, 8 for UDP + wire [15:0] ident = 16'h0; + wire [15:0] flag_frag = { 3'b010 /* don't fragment */, 13'h0 }; + wire [15:0] ttl_prot = { 8'h10 /* TTL */, 8'h11 /* UDP */ }; + wire [15:0] iphdr_checksum; + wire [31:0] ip_src, ip_dst; + wire [15:0] udp_src, udp_dst; + wire [15:0] udp_len = (16'd8 + vita_len_in_bytes); + wire [15:0] udp_checksum = 16'h0; + + setting_reg #(.my_addr(BASE), .awidth(SR_AWIDTH), .width(16)) set_mac_upper + (.clk(clk), .rst(reset), + .strobe(set_stb), .addr(set_addr), .in(set_data), + .out(mac_src[47:32]), .changed()); + + setting_reg #(.my_addr(BASE+1), .awidth(SR_AWIDTH), .width(32)) set_mac_lower + (.clk(clk), .rst(reset), + .strobe(set_stb), .addr(set_addr), .in(set_data), + .out(mac_src[31:0]), .changed()); + + setting_reg #(.my_addr(BASE+2), .awidth(SR_AWIDTH), .width(32)) set_ip + (.clk(clk), .rst(reset), + .strobe(set_stb), .addr(set_addr), .in(set_data), + .out(ip_src), .changed()); + + setting_reg #(.my_addr(BASE+3), .awidth(SR_AWIDTH), .width(16)) set_udp + (.clk(clk), .rst(reset), + .strobe(set_stb), .addr(set_addr), .in(set_data), + .out(udp_src), .changed()); + + // Tables of MAC/IP/UDP addresses + wire [8:0] ram_addr; // FIXME we could skip this part if we had wider SR addresses + + setting_reg #(.my_addr(BASE+4), .awidth(SR_AWIDTH), .width(9)) set_ram_addr + (.clk(clk), .rst(reset), + .strobe(set_stb), .addr(set_addr), .in(set_data), + .out(ram_addr), .changed()); + + ram_2port #(.DWIDTH(32), .AWIDTH(9)) ram_ip + (.clka(clk), .ena(1'b1), .wea(set_stb & (set_addr == BASE+5)), .addra(ram_addr), .dia(set_data), .doa(), + .clkb(clk), .enb(1'b1), .web(1'b0), .addrb(sid[8:0]), .dib(32'hFFFF_FFFF), .dob(ip_dst)); + + ram_2port #(.DWIDTH(32), .AWIDTH(9)) ram_udpmac + (.clka(clk), .ena(1'b1), .wea(set_stb & (set_addr == BASE+6)), .addra(ram_addr), .dia(set_data), .doa(), + .clkb(clk), .enb(1'b1), .web(1'b0), .addrb(sid[8:0]), .dib(32'hFFFF_FFFF), .dob({udp_dst,mac_dst[47:32]})); + + ram_2port #(.DWIDTH(32), .AWIDTH(9)) ram_maclower + (.clka(clk), .ena(1'b1), .wea(set_stb & (set_addr == BASE+7)), .addra(ram_addr), .dia(set_data), .doa(), + .clkb(clk), .enb(1'b1), .web(1'b0), .addrb(sid[8:0]), .dib(32'hFFFF_FFFF), .dob(mac_dst[31:0])); + + ip_hdr_checksum ip_hdr_checksum + (.clk(clk), .in({misc_ip,ip_len,ident,flag_frag,ttl_prot,16'd0,ip_src,ip_dst}), + .out(iphdr_checksum)); + + always @* + case(vef_state) + 1 : tdata <= { pad[47:0], mac_dst[47:32]}; + 2 : tdata <= { mac_dst[31:0], mac_src[47:16]}; + 3 : tdata <= { mac_src[15:0], eth_type[15:0], misc_ip[15:0], ip_len[15:0] }; + 4 : tdata <= { ident[15:0], flag_frag[15:0], ttl_prot[15:0], iphdr_checksum[15:0]}; + 5 : tdata <= { ip_src, ip_dst}; + 6 : tdata <= { udp_src, udp_dst, udp_len, udp_checksum}; + default : tdata <= in_tdata; + endcase // case (vef_state) + +endmodule // vita_eth_framer -- cgit v1.2.3