From 5514d168ab7fb6fb8d11238f4a381029b043c124 Mon Sep 17 00:00:00 2001
From: Nick Foster <nick@nerdnetworks.org>
Date: Tue, 10 Aug 2010 14:16:48 -0700
Subject: Interrupt-driven I2C. txrx_uhd uses async i2c for comms.

---
 firmware/microblaze/apps/txrx_uhd.c |  67 ++++++++++---
 firmware/microblaze/lib/i2c.c       | 184 +++++++++++++++++++++++++++++++++++-
 firmware/microblaze/lib/i2c.h       |  18 ++++
 firmware/microblaze/lib/u2_init.c   |  14 ++-
 4 files changed, 259 insertions(+), 24 deletions(-)

(limited to 'firmware')

diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c
index f0a9702be..30c1a13b4 100644
--- a/firmware/microblaze/apps/txrx_uhd.c
+++ b/firmware/microblaze/apps/txrx_uhd.c
@@ -172,6 +172,25 @@ void handle_udp_data_packet(
 #define OTW_GPIO_BANK_TO_NUM(bank) \
     (((bank) == USRP2_DIR_RX)? (GPIO_RX_BANK) : (GPIO_TX_BANK))
 
+    //setup the output data
+static usrp2_ctrl_data_t ctrl_data_out;
+static struct socket_address i2c_src, i2c_dst;
+
+static volatile bool i2c_done = false;
+void i2c_read_done_callback(void) {
+  //printf("I2C read done callback\n");
+  i2c_async_data_ready(ctrl_data_out.data.i2c_args.data);
+  i2c_done = true;
+  i2c_register_callback(0);
+}
+
+void i2c_write_done_callback(void) {
+  //printf("I2C write done callback\n");
+  i2c_done = true;
+  i2c_register_callback(0);
+}
+
+
 void handle_udp_ctrl_packet(
     struct socket_address src, struct socket_address dst,
     unsigned char *payload, int payload_len
@@ -181,9 +200,9 @@ void handle_udp_ctrl_packet(
     uint32_t ctrl_data_in_id = ctrl_data_in->id;
 
     //ensure that the protocol versions match
-    if (payload_len >= sizeof(uint32_t) && ctrl_data_in->proto_ver != USRP2_FW_COMPAT_NUM){
-        printf("!Error in control packet handler: Expected compatibility number %d, but got %d\n",
-            USRP2_FW_COMPAT_NUM, ctrl_data_in->proto_ver
+    if (payload_len >= sizeof(uint32_t) && ctrl_data_in->proto_ver != USRP2_PROTO_VERSION){
+        printf("!Error in control packet handler: Expected protocol version %d, but got %d\n",
+            USRP2_PROTO_VERSION, ctrl_data_in->proto_ver
         );
         ctrl_data_in_id = USRP2_CTRL_ID_WAZZUP_BRO;
     }
@@ -197,11 +216,9 @@ void handle_udp_ctrl_packet(
     }
 
     //setup the output data
-    usrp2_ctrl_data_t ctrl_data_out = {
-        .proto_ver = USRP2_FW_COMPAT_NUM,
-        .id=USRP2_CTRL_ID_HUH_WHAT,
-        .seq=ctrl_data_in->seq
-    };
+    ctrl_data_out.proto_ver = USRP2_PROTO_VERSION;
+    ctrl_data_out.id=USRP2_CTRL_ID_HUH_WHAT;
+    ctrl_data_out.seq=ctrl_data_in->seq;
 
     //handle the data based on the id
     switch(ctrl_data_in_id){
@@ -212,6 +229,7 @@ void handle_udp_ctrl_packet(
     case USRP2_CTRL_ID_WAZZUP_BRO:
         ctrl_data_out.id = USRP2_CTRL_ID_WAZZUP_DUDE;
         memcpy(&ctrl_data_out.data.ip_addr, get_ip_addr(), sizeof(struct ip_addr));
+        send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
         break;
 
     /*******************************************************************
@@ -232,6 +250,7 @@ void handle_udp_ctrl_packet(
             ctrl_data_out.data.spi_args.data = result;
             ctrl_data_out.id = USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE;
         }
+        send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
         break;
 
     /*******************************************************************
@@ -239,26 +258,38 @@ void handle_udp_ctrl_packet(
      ******************************************************************/
     case USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO:{
             uint8_t num_bytes = ctrl_data_in->data.i2c_args.bytes;
-            i2c_read(
+            i2c_register_callback(i2c_read_done_callback);
+            /*i2c_read(
                 ctrl_data_in->data.i2c_args.addr,
                 ctrl_data_out.data.i2c_args.data,
                 num_bytes
+            );*/
+            i2c_async_read(
+                ctrl_data_in->data.i2c_args.addr,
+                num_bytes
             );
+            i2c_src = src;
+            i2c_dst = dst;
             ctrl_data_out.id = USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE;
             ctrl_data_out.data.i2c_args.bytes = num_bytes;
         }
+        //send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); //TODO: NO
         break;
 
     case USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO:{
             uint8_t num_bytes = ctrl_data_in->data.i2c_args.bytes;
-            i2c_write(
+            i2c_register_callback(i2c_write_done_callback);
+            i2c_async_write(
                 ctrl_data_in->data.i2c_args.addr,
                 ctrl_data_in->data.i2c_args.data,
                 num_bytes
             );
+            i2c_src = src;
+            i2c_dst = dst;
             ctrl_data_out.id = USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE;
             ctrl_data_out.data.i2c_args.bytes = num_bytes;
         }
+        //send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); //TODO: NO
         break;
 
     /*******************************************************************
@@ -287,6 +318,7 @@ void handle_udp_ctrl_packet(
 
         }
         ctrl_data_out.id = USRP2_CTRL_ID_OMG_POKED_REGISTER_SO_BAD_DUDE;
+        send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
         break;
 
     case USRP2_CTRL_ID_PEEK_AT_THIS_REGISTER_FOR_ME_BRO:
@@ -309,13 +341,15 @@ void handle_udp_ctrl_packet(
 
         }
         ctrl_data_out.id = USRP2_CTRL_ID_WOAH_I_DEFINITELY_PEEKED_IT_DUDE;
+        send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
         break;
 
     default:
         ctrl_data_out.id = USRP2_CTRL_ID_HUH_WHAT;
+        send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
 
     }
-    send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
+
 }
 
 /*
@@ -441,8 +475,7 @@ main(void)
   print_mac_addr(ethernet_mac_addr()->addr);
   newline();
   print_ip_addr(get_ip_addr()); newline();
-  printf("FPGA compatibility number: %d\n", USRP2_FPGA_COMPAT_NUM);
-  printf("Firmware compatibility number: %d\n", USRP2_FW_COMPAT_NUM);
+  printf("Control protocol version: %d\n", USRP2_PROTO_VERSION);
 
   ethernet_register_link_changed_callback(link_changed_callback);
   ethernet_init();
@@ -481,10 +514,16 @@ main(void)
 
     buffer_irq_handler(0);
 
+    if(i2c_done) {
+      i2c_done = false;
+      send_udp_pkt(USRP2_UDP_CTRL_PORT, i2c_src, &ctrl_data_out, sizeof(ctrl_data_out));
+      //printf("Sending UDP packet from main loop for I2C...\n");
+    }
+
     int pending = pic_regs->pending;		// poll for under or overrun
 
     if (pending & PIC_UNDERRUN_INT){
-      //dbsm_handle_tx_underrun(&dsp_tx_sm);
+      dbsm_handle_tx_underrun(&dsp_tx_sm);
       pic_regs->pending = PIC_UNDERRUN_INT;	// clear interrupt
       putchar('U');
     }
diff --git a/firmware/microblaze/lib/i2c.c b/firmware/microblaze/lib/i2c.c
index 3f738733b..b60a05fcc 100644
--- a/firmware/microblaze/lib/i2c.c
+++ b/firmware/microblaze/lib/i2c.c
@@ -19,12 +19,15 @@
 #include "i2c.h"
 #include "memory_map.h"
 #include "stdint.h"
+#include <string.h>
+#include "pic.h"
+#include "nonstdio.h"
 
 #define MAX_WB_DIV 4	// maximum wishbone divisor (from 100 MHz MASTER_CLK)
 
 // prescaler divisor values for 100 kHz I2C [uses 5 * SCLK internally]
 
-#define PRESCALER(wb_div) (((MASTER_CLK_RATE/(wb_div)) / (5 * 100000)) - 1)
+#define PRESCALER(wb_div) (((MASTER_CLK_RATE/(wb_div)) / (5 * 400000)) - 1)
 
 static uint16_t prescaler_values[MAX_WB_DIV+1] = {
   0xffff,	// 0: can't happen
@@ -34,6 +37,18 @@ static uint16_t prescaler_values[MAX_WB_DIV+1] = {
   PRESCALER(4), // 4:  25 MHz
 };
 
+//asynchronous (interrupt-driven) i2c state variables
+volatile uint8_t i2c_buf[17]; //tx/rx data transfer buffer
+volatile uint8_t *i2c_bufptr = i2c_buf; //ptr to current position
+volatile uint8_t i2c_len = 0; //length remaining in current transfer
+volatile i2c_state_t i2c_state = I2C_STATE_IDLE; //current I2C transfer state
+i2c_dir_t i2c_dir; //I2C transfer direction
+
+volatile void  (*i2c_callback)(void); //function pointer to i2c callback to be called when transaction is complete
+
+static void i2c_irq_handler(unsigned irq);
+inline void i2c_async_err(void);
+
 void
 i2c_init(void)
 {
@@ -47,9 +62,10 @@ i2c_init(void)
   i2c_regs->prescaler_lo = prescaler_values[wb_div] & 0xff;
   i2c_regs->prescaler_hi = (prescaler_values[wb_div] >> 8) & 0xff;
 
-  i2c_regs->ctrl = I2C_CTRL_EN;	// enable core
+  i2c_regs->ctrl = I2C_CTRL_EN; //| I2C_CTRL_IE;	// enable core
 
-  // FIXME interrupt driven?
+  // FIXME interrupt driven?  
+  pic_register_handler(IRQ_I2C, i2c_irq_handler);
 }
 
 static inline void
@@ -107,7 +123,7 @@ i2c_write(unsigned char i2c_addr, const unsigned char *buf, unsigned int len)
   i2c_regs->data = (i2c_addr << 1) | 0;	 // 7 bit address and write bit (0)
 
   // generate START and write addr (and maybe STOP)
-  i2c_regs->cmd_status = I2C_CMD_WR | I2C_CMD_START | (len == 0 ? I2C_CMD_STOP : 0);  
+  i2c_regs->cmd_status = I2C_CMD_WR | I2C_CMD_START | (len == 0 ? I2C_CMD_STOP : 0);
   if (!wait_chk_ack())
     goto fail;
 
@@ -124,4 +140,162 @@ i2c_write(unsigned char i2c_addr, const unsigned char *buf, unsigned int len)
   return false;
 }
 
-  
+static void i2c_irq_handler(unsigned irq) {
+//i2c state machine.
+
+  //printf("I2C irq handler\n");
+  //first let's make sure nothing is f'ed up
+  if(((i2c_regs->cmd_status & I2C_ST_RXACK) != 0) && i2c_dir == I2C_DIR_WRITE) { //we got a NACK and we didn't send it
+    printf("\tNACK received\n");
+    i2c_async_err();
+    return;
+  }// else printf("\tACK received, proceeding\n");
+
+  if(i2c_regs->cmd_status & I2C_ST_AL) { 
+    printf("\tArbitration lost!\n");
+    i2c_async_err();
+    return;
+  }
+
+  if(i2c_regs->cmd_status & I2C_ST_TIP) {
+    //printf("\tI2C still busy in interrupt\n");
+    return;
+  }
+
+  //now decide what to do
+  switch(i2c_state) {
+
+  case I2C_STATE_IDLE:
+    //this is an error. in idle state, we shouldn't be transferring data, and the fact that the IRQ fired is terrible bad.
+    printf("AAAAAHHHHH INTERRUPT IN THE IDLE STATE AAAHHHHHHHHH\n");
+    i2c_async_err();
+    break;
+
+  case I2C_STATE_CONTROL_BYTE_SENT: //here we've sent the control byte, and we're either clocking data in or out now, but we haven't received a byte yet.
+  case I2C_STATE_DATA:      //here we're sending/receiving data and if we're receiving there's data in the data reg
+
+    //if(i2c_state == I2C_STATE_DATA) printf("\tI2C in state DATA with dir=%d and len=%d\n", i2c_dir, i2c_len);
+    //else printf("\tI2C in state CONTROL_BYTE_SENT with dir=%d and len=%d\n", i2c_dir, i2c_len);
+
+    if(i2c_dir == I2C_DIR_READ) {
+      if(i2c_state == I2C_STATE_DATA) *(i2c_bufptr++) = i2c_regs->data;
+      //printf("\tRead %x\n", *(i2c_bufptr-1));
+      //set up another data byte
+      if(i2c_len > 1) //only one more byte to transfer
+        i2c_regs->cmd_status = I2C_CMD_RD;
+      else
+        i2c_regs->cmd_status = I2C_CMD_RD | I2C_CMD_NACK | I2C_CMD_STOP;
+    }
+    else if(i2c_dir == I2C_DIR_WRITE) {
+      //write a byte
+      //printf("\tWriting %x\n", *i2c_bufptr);
+      i2c_regs->data = *(i2c_bufptr++);
+      if(i2c_len > 1)
+        i2c_regs->cmd_status = I2C_CMD_WR;
+      else {
+        //printf("\tGenerating STOP\n");
+        i2c_regs->cmd_status = I2C_CMD_WR | I2C_CMD_STOP;
+      }
+    };
+    i2c_len--;
+    if(i2c_len == 0) i2c_state = I2C_STATE_LAST_BYTE;
+    else i2c_state = I2C_STATE_DATA; //takes care of the addr_sent->data transition
+    break;
+
+
+  case I2C_STATE_LAST_BYTE: //here we've already sent the last read request and the last data is waiting for us.
+    //printf("\tI2C in state LAST BYTE\n");
+
+    if(i2c_dir == I2C_DIR_READ) {
+      *(i2c_bufptr++) = i2c_regs->data;
+      //printf("\tRead %x\n", *(i2c_bufptr-1));
+      i2c_state = I2C_STATE_DATA_READY;
+    } else {
+      i2c_state = I2C_STATE_IDLE;
+    }
+    i2c_regs->ctrl &= ~I2C_CTRL_IE; //disable interrupts until next time
+
+    if(i2c_callback) {
+      i2c_callback(); //if we registered a callback, call it!
+    }
+
+    break;
+
+
+  default: //terrible things have happened.
+    printf("you fail at life.\n");
+  }
+
+}
+
+void i2c_register_callback(volatile void (*callback)(void)) {
+  i2c_callback = callback;
+}
+
+inline void i2c_async_err(void) {
+  i2c_state = I2C_STATE_IDLE;
+  i2c_regs->ctrl &= ~I2C_CTRL_IE;
+  printf("I2C error\n");
+//TODO: set an error flag instead of just dropping things on the floor
+  i2c_regs->cmd_status = I2C_CMD_STOP;
+}
+
+bool i2c_async_read(uint8_t addr, unsigned int len) {
+  //printf("Starting async read\n");
+  if(i2c_state != I2C_STATE_IDLE) return false; //sorry mario but your i2c is in another castle
+  if(len == 0) return true; //just idiot-proofing
+  if(len > sizeof(i2c_buf)) return false;
+
+  //disable I2C interrupts and clear pending interrupts on the I2C device
+  i2c_regs->ctrl &= ~I2C_CTRL_IE;
+  i2c_regs->cmd_status |= I2C_CMD_IACK;
+
+  i2c_len = len;
+  i2c_dir = I2C_DIR_READ;
+  i2c_bufptr = i2c_buf;
+  //then set up the transfer by issuing the control byte
+  i2c_regs->ctrl |= I2C_CTRL_IE;
+  i2c_regs->data = (addr << 1) | 0x01; //7 bit addr and read bit
+  i2c_regs->cmd_status = I2C_CMD_WR | I2C_CMD_START; //generate start & start writing addr
+  //update the state so the irq handler knows what's going on
+  i2c_state = I2C_STATE_CONTROL_BYTE_SENT;
+  return true;
+}
+
+bool i2c_async_write(uint8_t addr, const uint8_t *buf, unsigned int len) {
+  //printf("Starting async write\n");
+  if(i2c_state != I2C_STATE_IDLE) return false; //sorry mario but your i2c is in another castle
+  if(len > sizeof(i2c_buf)) return false;
+
+  //disable I2C interrupts and clear pending interrupts on the I2C device
+  i2c_regs->ctrl &= ~I2C_CTRL_IE;
+  i2c_regs->cmd_status |= I2C_CMD_IACK;
+
+  //copy the buffer into our own if writing
+  memcpy(i2c_buf, buf, len);
+
+  i2c_len = len;
+  i2c_dir = I2C_DIR_WRITE;
+  i2c_bufptr = i2c_buf;
+  //then set up the transfer by issuing the control byte
+  i2c_regs->ctrl |= I2C_CTRL_IE;
+  i2c_regs->data = (addr << 1) | 0x00; //7 bit addr and read bit
+  i2c_regs->cmd_status = I2C_CMD_WR | I2C_CMD_START; //generate start & start writing addr
+  //update the state so the irq handler knows what's going on
+  i2c_state = I2C_STATE_CONTROL_BYTE_SENT;
+
+  return true;
+}
+
+//TODO: determine if it's better to read sequentially into the user's buffer, copy on transfer complete, or copy on request (shown below). probably best to copy on request.
+bool i2c_async_data_ready(const void *buf) {
+  if(i2c_state == I2C_STATE_DATA_READY) {
+    i2c_state = I2C_STATE_IDLE;
+    memcpy(buf, i2c_buf, (i2c_bufptr - i2c_buf)); //TODO: not really comfortable with this
+    //printf("Copying %d bytes to user buffer\n", i2c_bufptr-i2c_buf);
+    return true;
+  }
+  return false;
+}
+
+
diff --git a/firmware/microblaze/lib/i2c.h b/firmware/microblaze/lib/i2c.h
index ecb6aa0d2..a991c6ac4 100644
--- a/firmware/microblaze/lib/i2c.h
+++ b/firmware/microblaze/lib/i2c.h
@@ -20,20 +20,38 @@
 #define INCLUDED_I2C_H
 
 #include <stdbool.h>
+#include "stdint.h"
+
+typedef enum { I2C_STATE_IDLE, 
+               I2C_STATE_CONTROL_BYTE_SENT, 
+               I2C_STATE_DATA, 
+               I2C_STATE_LAST_BYTE, 
+               I2C_STATE_DATA_READY, 
+               I2C_STATE_ERROR 
+             } i2c_state_t;
+
+typedef enum { I2C_DIR_WRITE=0, I2C_DIR_READ=1 } i2c_dir_t;
 
 void i2c_init(void);
 bool i2c_read (unsigned char i2c_addr, unsigned char *buf, unsigned int len);
 bool i2c_write(unsigned char i2c_addr, const unsigned char *buf, unsigned int len);
 
+bool i2c_async_read(uint8_t addr, unsigned int len);
+bool i2c_async_write(uint8_t addr, const uint8_t *buf, unsigned int len);
+bool i2c_async_data_ready(const void *);
+//static void i2c_irq_handler(unsigned irq);
+void i2c_register_callback(void (*callback)(void));
 
 // Write 24LC024 / 24LC025 EEPROM on motherboard or daughterboard.
 // Which EEPROM is determined by i2c_addr.  See i2c_addr.h
 
 bool eeprom_write (int i2c_addr, int eeprom_offset, const void *buf, int len);
+bool eeprom_write_async (int i2c_addr, int eeprom_offset, const void *buf, int len, void (*callback)(void));
 
 // Read 24LC024 / 24LC025 EEPROM on motherboard or daughterboard.
 // Which EEPROM is determined by i2c_addr.  See i2c_addr.h
 
 bool eeprom_read (int i2c_addr, int eeprom_offset, void *buf, int len);
+bool eeprom_read_async(int i2c_addr, int eeprom_offset, void *buf, int len, void (*callback)(void));
 
 #endif /* INCLUDED_I2C_H */
diff --git a/firmware/microblaze/lib/u2_init.c b/firmware/microblaze/lib/u2_init.c
index 75bc40859..8d666b76b 100644
--- a/firmware/microblaze/lib/u2_init.c
+++ b/firmware/microblaze/lib/u2_init.c
@@ -45,22 +45,26 @@ get_hw_rev(void)
 bool
 u2_init(void)
 {
+  hal_disable_ints();
   hal_io_init();
 
   // init spi, so that we can switch over to the high-speed clock
   spi_init();
 
-  // init i2c so we can read our rev
-  i2c_init();
-  get_hw_rev();
-
   // set up the default clocks
   clocks_init();
 
+  hal_uart_init();
+
+  // init i2c so we can read our rev
   pic_init();	// progammable interrupt controller
+  i2c_init();
+  hal_enable_ints();
+  get_hw_rev();
+
   bp_init();	// buffer pool
   
-  hal_enable_ints();
+
 
   // flash all leds to let us know board is alive
   hal_set_leds(0x0, 0x1f);
-- 
cgit v1.2.3


From 579268112a8d17d527cd4f969346e20f7ce4321e Mon Sep 17 00:00:00 2001
From: Nick Foster <nick@nerdnetworks.org>
Date: Tue, 10 Aug 2010 14:53:26 -0700
Subject: Bring in changes since last week.

---
 firmware/microblaze/apps/txrx_uhd.c | 28 ++++++++++------------------
 1 file changed, 10 insertions(+), 18 deletions(-)

(limited to 'firmware')

diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c
index 30c1a13b4..bdb793fd9 100644
--- a/firmware/microblaze/apps/txrx_uhd.c
+++ b/firmware/microblaze/apps/txrx_uhd.c
@@ -172,7 +172,7 @@ void handle_udp_data_packet(
 #define OTW_GPIO_BANK_TO_NUM(bank) \
     (((bank) == USRP2_DIR_RX)? (GPIO_RX_BANK) : (GPIO_TX_BANK))
 
-    //setup the output data
+//setup the output data
 static usrp2_ctrl_data_t ctrl_data_out;
 static struct socket_address i2c_src, i2c_dst;
 
@@ -190,7 +190,6 @@ void i2c_write_done_callback(void) {
   i2c_register_callback(0);
 }
 
-
 void handle_udp_ctrl_packet(
     struct socket_address src, struct socket_address dst,
     unsigned char *payload, int payload_len
@@ -200,9 +199,9 @@ void handle_udp_ctrl_packet(
     uint32_t ctrl_data_in_id = ctrl_data_in->id;
 
     //ensure that the protocol versions match
-    if (payload_len >= sizeof(uint32_t) && ctrl_data_in->proto_ver != USRP2_PROTO_VERSION){
-        printf("!Error in control packet handler: Expected protocol version %d, but got %d\n",
-            USRP2_PROTO_VERSION, ctrl_data_in->proto_ver
+    if (payload_len >= sizeof(uint32_t) && ctrl_data_in->proto_ver != USRP2_FW_COMPAT_NUM){
+        printf("!Error in control packet handler: Expected compatibility number %d, but got %d\n",
+            USRP2_FW_COMPAT_NUM, ctrl_data_in->proto_ver
         );
         ctrl_data_in_id = USRP2_CTRL_ID_WAZZUP_BRO;
     }
@@ -216,7 +215,7 @@ void handle_udp_ctrl_packet(
     }
 
     //setup the output data
-    ctrl_data_out.proto_ver = USRP2_PROTO_VERSION;
+    ctrl_data_out.proto_ver = USRP2_FW_COMPAT_NUM;
     ctrl_data_out.id=USRP2_CTRL_ID_HUH_WHAT;
     ctrl_data_out.seq=ctrl_data_in->seq;
 
@@ -259,11 +258,6 @@ void handle_udp_ctrl_packet(
     case USRP2_CTRL_ID_DO_AN_I2C_READ_FOR_ME_BRO:{
             uint8_t num_bytes = ctrl_data_in->data.i2c_args.bytes;
             i2c_register_callback(i2c_read_done_callback);
-            /*i2c_read(
-                ctrl_data_in->data.i2c_args.addr,
-                ctrl_data_out.data.i2c_args.data,
-                num_bytes
-            );*/
             i2c_async_read(
                 ctrl_data_in->data.i2c_args.addr,
                 num_bytes
@@ -273,12 +267,11 @@ void handle_udp_ctrl_packet(
             ctrl_data_out.id = USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE;
             ctrl_data_out.data.i2c_args.bytes = num_bytes;
         }
-        //send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); //TODO: NO
         break;
 
     case USRP2_CTRL_ID_WRITE_THESE_I2C_VALUES_BRO:{
             uint8_t num_bytes = ctrl_data_in->data.i2c_args.bytes;
-            i2c_register_callback(i2c_write_done_callback);
+            i2c_register_callback(i2c_read_done_callback);
             i2c_async_write(
                 ctrl_data_in->data.i2c_args.addr,
                 ctrl_data_in->data.i2c_args.data,
@@ -289,7 +282,6 @@ void handle_udp_ctrl_packet(
             ctrl_data_out.id = USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE;
             ctrl_data_out.data.i2c_args.bytes = num_bytes;
         }
-        //send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out)); //TODO: NO
         break;
 
     /*******************************************************************
@@ -347,9 +339,8 @@ void handle_udp_ctrl_packet(
     default:
         ctrl_data_out.id = USRP2_CTRL_ID_HUH_WHAT;
         send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
-
     }
-
+    
 }
 
 /*
@@ -475,7 +466,8 @@ main(void)
   print_mac_addr(ethernet_mac_addr()->addr);
   newline();
   print_ip_addr(get_ip_addr()); newline();
-  printf("Control protocol version: %d\n", USRP2_PROTO_VERSION);
+  printf("FPGA compatibility number: %d\n", USRP2_FPGA_COMPAT_NUM);
+  printf("Firmware compatibility number: %d\n", USRP2_FW_COMPAT_NUM);
 
   ethernet_register_link_changed_callback(link_changed_callback);
   ethernet_init();
@@ -523,7 +515,7 @@ main(void)
     int pending = pic_regs->pending;		// poll for under or overrun
 
     if (pending & PIC_UNDERRUN_INT){
-      dbsm_handle_tx_underrun(&dsp_tx_sm);
+      //dbsm_handle_tx_underrun(&dsp_tx_sm);
       pic_regs->pending = PIC_UNDERRUN_INT;	// clear interrupt
       putchar('U');
     }
-- 
cgit v1.2.3


From 936c5518e47f797c062c0ac5de0e5bd1452c7a0d Mon Sep 17 00:00:00 2001
From: Nick Foster <nick@nerdnetworks.org>
Date: Wed, 11 Aug 2010 09:19:22 -0700
Subject: Fix warnings related to const-ness and volatile-ness.

---
 firmware/microblaze/lib/i2c.c | 12 ++++++------
 firmware/microblaze/lib/i2c.h |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'firmware')

diff --git a/firmware/microblaze/lib/i2c.c b/firmware/microblaze/lib/i2c.c
index b60a05fcc..216b01800 100644
--- a/firmware/microblaze/lib/i2c.c
+++ b/firmware/microblaze/lib/i2c.c
@@ -39,12 +39,12 @@ static uint16_t prescaler_values[MAX_WB_DIV+1] = {
 
 //asynchronous (interrupt-driven) i2c state variables
 volatile uint8_t i2c_buf[17]; //tx/rx data transfer buffer
-volatile uint8_t *i2c_bufptr = i2c_buf; //ptr to current position
+volatile uint8_t *volatile i2c_bufptr = i2c_buf; //ptr to current position
 volatile uint8_t i2c_len = 0; //length remaining in current transfer
 volatile i2c_state_t i2c_state = I2C_STATE_IDLE; //current I2C transfer state
 i2c_dir_t i2c_dir; //I2C transfer direction
 
-volatile void  (*i2c_callback)(void); //function pointer to i2c callback to be called when transaction is complete
+void  (*volatile i2c_callback)(void); //function pointer to i2c callback to be called when transaction is complete
 
 static void i2c_irq_handler(unsigned irq);
 inline void i2c_async_err(void);
@@ -228,7 +228,7 @@ static void i2c_irq_handler(unsigned irq) {
 
 }
 
-void i2c_register_callback(volatile void (*callback)(void)) {
+void i2c_register_callback(void (*volatile callback)(void)) {
   i2c_callback = callback;
 }
 
@@ -272,7 +272,7 @@ bool i2c_async_write(uint8_t addr, const uint8_t *buf, unsigned int len) {
   i2c_regs->cmd_status |= I2C_CMD_IACK;
 
   //copy the buffer into our own if writing
-  memcpy(i2c_buf, buf, len);
+  memcpy((void *)i2c_buf, buf, len);
 
   i2c_len = len;
   i2c_dir = I2C_DIR_WRITE;
@@ -288,10 +288,10 @@ bool i2c_async_write(uint8_t addr, const uint8_t *buf, unsigned int len) {
 }
 
 //TODO: determine if it's better to read sequentially into the user's buffer, copy on transfer complete, or copy on request (shown below). probably best to copy on request.
-bool i2c_async_data_ready(const void *buf) {
+bool i2c_async_data_ready(void *buf) {
   if(i2c_state == I2C_STATE_DATA_READY) {
     i2c_state = I2C_STATE_IDLE;
-    memcpy(buf, i2c_buf, (i2c_bufptr - i2c_buf)); //TODO: not really comfortable with this
+    memcpy(buf, (void *)i2c_buf, (i2c_bufptr - i2c_buf)); //TODO: not really comfortable with this
     //printf("Copying %d bytes to user buffer\n", i2c_bufptr-i2c_buf);
     return true;
   }
diff --git a/firmware/microblaze/lib/i2c.h b/firmware/microblaze/lib/i2c.h
index a991c6ac4..77129e922 100644
--- a/firmware/microblaze/lib/i2c.h
+++ b/firmware/microblaze/lib/i2c.h
@@ -38,7 +38,7 @@ bool i2c_write(unsigned char i2c_addr, const unsigned char *buf, unsigned int le
 
 bool i2c_async_read(uint8_t addr, unsigned int len);
 bool i2c_async_write(uint8_t addr, const uint8_t *buf, unsigned int len);
-bool i2c_async_data_ready(const void *);
+bool i2c_async_data_ready(void *);
 //static void i2c_irq_handler(unsigned irq);
 void i2c_register_callback(void (*callback)(void));
 
-- 
cgit v1.2.3


From c23a4c4334960b4c136e5cdb5b09556ea0d7c9a8 Mon Sep 17 00:00:00 2001
From: Nick Foster <nick@nerdnetworks.org>
Date: Wed, 11 Aug 2010 15:43:47 -0700
Subject: Removed NACK checking so things don't barf when daughterboards aren't
 connected.

When we have real error handling in the DUDE/BRO protocol we'll add this back in.
---
 firmware/microblaze/lib/i2c.c | 13 +++++++------
 1 file changed, 7 insertions(+), 6 deletions(-)

(limited to 'firmware')

diff --git a/firmware/microblaze/lib/i2c.c b/firmware/microblaze/lib/i2c.c
index 216b01800..177341267 100644
--- a/firmware/microblaze/lib/i2c.c
+++ b/firmware/microblaze/lib/i2c.c
@@ -145,11 +145,12 @@ static void i2c_irq_handler(unsigned irq) {
 
   //printf("I2C irq handler\n");
   //first let's make sure nothing is f'ed up
-  if(((i2c_regs->cmd_status & I2C_ST_RXACK) != 0) && i2c_dir == I2C_DIR_WRITE) { //we got a NACK and we didn't send it
-    printf("\tNACK received\n");
-    i2c_async_err();
-    return;
-  }// else printf("\tACK received, proceeding\n");
+  //TODO: uncomment this error checking when we have some way to handle errors
+//  if(((i2c_regs->cmd_status & I2C_ST_RXACK) != 0) && i2c_dir == I2C_DIR_WRITE) { //we got a NACK and we didn't send it
+//    printf("\tNACK received\n");
+//    i2c_async_err();
+//    return;
+//  }// else printf("\tACK received, proceeding\n");
 
   if(i2c_regs->cmd_status & I2C_ST_AL) { 
     printf("\tArbitration lost!\n");
@@ -223,7 +224,7 @@ static void i2c_irq_handler(unsigned irq) {
 
 
   default: //terrible things have happened.
-    printf("you fail at life.\n");
+    break;
   }
 
 }
-- 
cgit v1.2.3


From 5b5f8901f5dfa179af3718a8a31001206a886ed3 Mon Sep 17 00:00:00 2001
From: Nick Foster <nick@nerdnetworks.org>
Date: Wed, 11 Aug 2010 11:49:48 -0700
Subject: first stab at irq'ed spi

---
 firmware/microblaze/apps/txrx_uhd.c | 30 +++++++++++++++++++++------
 firmware/microblaze/lib/spi.c       | 41 +++++++++++++++++++++++++++++++++++++
 firmware/microblaze/lib/spi.h       |  7 +++++++
 3 files changed, 72 insertions(+), 6 deletions(-)

(limited to 'firmware')

diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c
index bdb793fd9..82e2e2b6f 100644
--- a/firmware/microblaze/apps/txrx_uhd.c
+++ b/firmware/microblaze/apps/txrx_uhd.c
@@ -174,7 +174,8 @@ void handle_udp_data_packet(
 
 //setup the output data
 static usrp2_ctrl_data_t ctrl_data_out;
-static struct socket_address i2c_src, i2c_dst;
+static struct socket_address i2c_src;
+static struct socket_address spi_src;
 
 static volatile bool i2c_done = false;
 void i2c_read_done_callback(void) {
@@ -190,6 +191,14 @@ void i2c_write_done_callback(void) {
   i2c_register_callback(0);
 }
 
+static volatile bool spi_done = false;
+static volatile uint32_t spi_readback_data;
+void get_spi_readback_data(void) {
+  spi_readback_data = spi_get_data();
+  spi_done = true;
+  spi_register_callback(0);
+}
+
 void handle_udp_ctrl_packet(
     struct socket_address src, struct socket_address dst,
     unsigned char *payload, int payload_len
@@ -236,20 +245,24 @@ void handle_udp_ctrl_packet(
      ******************************************************************/
     case USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO:{
             //transact
-            uint32_t result = spi_transact(
-                (ctrl_data_in->data.spi_args.readback == 0)? SPI_TXONLY : SPI_TXRX,
+            uint32_t result;
+            void (*volatile spicall)(void) = (ctrl_data_in->data.spi_args.readback == 0) ? 0 : get_spi_readback_data; //only need a callback if we're doing readback
+            bool success = spi_async_transact(
+                //(ctrl_data_in->data.spi_args.readback == 0)? SPI_TXONLY : SPI_TXRX,
                 ctrl_data_in->data.spi_args.dev,      //which device
                 ctrl_data_in->data.spi_args.data,     //32 bit data
                 ctrl_data_in->data.spi_args.num_bits, //length in bits
-                (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPIF_PUSH_FALL : SPIF_PUSH_RISE |
-                (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPIF_LATCH_RISE : SPIF_LATCH_FALL
+                (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPIF_PUSH_FALL : SPIF_PUSH_RISE | //flags
+                (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPIF_LATCH_RISE : SPIF_LATCH_FALL,
+                spicall //callback
             );
 
             //load output
             ctrl_data_out.data.spi_args.data = result;
             ctrl_data_out.id = USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE;
+            spi_src = src;
         }
-        send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
+//        send_udp_pkt(USRP2_UDP_CTRL_PORT, src, &ctrl_data_out, sizeof(ctrl_data_out));
         break;
 
     /*******************************************************************
@@ -512,6 +525,11 @@ main(void)
       //printf("Sending UDP packet from main loop for I2C...\n");
     }
 
+    if(spi_done) {
+      spi_done = false;
+      send_udp_pkt(USRP2_UDP_CTRL_PORT, spi_src, &ctrl_data_out, sizeof(ctrl_data_out));
+    }
+
     int pending = pic_regs->pending;		// poll for under or overrun
 
     if (pending & PIC_UNDERRUN_INT){
diff --git a/firmware/microblaze/lib/spi.c b/firmware/microblaze/lib/spi.c
index bef808e57..4371b9b8a 100644
--- a/firmware/microblaze/lib/spi.c
+++ b/firmware/microblaze/lib/spi.c
@@ -17,6 +17,9 @@
 
 #include "spi.h"
 #include "memory_map.h"
+#include "nonstdio.h"
+
+void (*volatile spi_callback)(void); //SPI callback when xfer complete.
 
 void
 spi_init(void) 
@@ -59,3 +62,41 @@ spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags
   else
     return 0;
 }
+
+void spi_register_callback(void (*volatile callback)(void)) {
+  spi_callback = callback;
+}
+
+void spi_irq_handler(void) {
+  printf("SPI IRQ handler\n");
+  if(spi_callback) spi_callback(); //we could just use the PIC to register the user's callback, but this provides the ability to do other things later
+}
+
+uint32_t spi_get_data(void) {
+  return spi_regs->txrx0;
+}
+
+bool 
+spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void)) {
+  flags &= (SPI_CTRL_TXNEG | SPI_CTRL_RXNEG);
+  int ctrl = SPI_CTRL_ASS | (SPI_CTRL_CHAR_LEN_MASK & length) | flags;
+
+  if(spi_regs->ctrl & SPI_CTRL_GO_BSY) return false; //we don't wait on busy, we just return failure.
+
+  // Tell it which SPI slave device to access
+  spi_regs->ss = slave & 0xffff;
+
+  // Data we will send
+  spi_regs->txrx0 = data;
+
+  // Run it -- write once and rewrite with GO set
+  spi_regs->ctrl = ctrl;
+  spi_regs->ctrl = ctrl | SPI_CTRL_GO_BSY;
+
+  spi_regs->ctrl |= SPI_CTRL_IE; //we do these here so that we don't have to start the PIC before the SPI sets up the clocks on startup
+  pic_register_handler(IRQ_SPI, spi_irq_handler);
+
+  spi_register_callback(callback);
+
+  return true;
+}
diff --git a/firmware/microblaze/lib/spi.h b/firmware/microblaze/lib/spi.h
index 01e4d26fd..18699f21a 100644
--- a/firmware/microblaze/lib/spi.h
+++ b/firmware/microblaze/lib/spi.h
@@ -48,6 +48,13 @@ void spi_wait(void);
 uint32_t
 spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags);
 
+bool 
+spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void));
+
+uint32_t spi_get_data(void);
+void spi_irq_handler(void);
+void spi_register_callback(void (*volatile callback)(void));
+
 // ----------------------------------------------------------------
 // Routines that manipulate the FLASH SPI BUS
 // ----------------------------------------------------------------
-- 
cgit v1.2.3


From 20d1f96f9594e299f8aef78cc70a587d1d87e289 Mon Sep 17 00:00:00 2001
From: Nick Foster <nick@nerdnetworks.org>
Date: Wed, 11 Aug 2010 11:59:13 -0700
Subject: syntax

---
 firmware/microblaze/apps/txrx_uhd.c | 4 ++--
 firmware/microblaze/lib/spi.c       | 1 +
 2 files changed, 3 insertions(+), 2 deletions(-)

(limited to 'firmware')

diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c
index 82e2e2b6f..6fb01fec2 100644
--- a/firmware/microblaze/apps/txrx_uhd.c
+++ b/firmware/microblaze/apps/txrx_uhd.c
@@ -276,7 +276,7 @@ void handle_udp_ctrl_packet(
                 num_bytes
             );
             i2c_src = src;
-            i2c_dst = dst;
+//            i2c_dst = dst;
             ctrl_data_out.id = USRP2_CTRL_ID_HERES_THE_I2C_DATA_DUDE;
             ctrl_data_out.data.i2c_args.bytes = num_bytes;
         }
@@ -291,7 +291,7 @@ void handle_udp_ctrl_packet(
                 num_bytes
             );
             i2c_src = src;
-            i2c_dst = dst;
+//            i2c_dst = dst;
             ctrl_data_out.id = USRP2_CTRL_ID_COOL_IM_DONE_I2C_WRITE_DUDE;
             ctrl_data_out.data.i2c_args.bytes = num_bytes;
         }
diff --git a/firmware/microblaze/lib/spi.c b/firmware/microblaze/lib/spi.c
index 4371b9b8a..33fcce05f 100644
--- a/firmware/microblaze/lib/spi.c
+++ b/firmware/microblaze/lib/spi.c
@@ -17,6 +17,7 @@
 
 #include "spi.h"
 #include "memory_map.h"
+#include "pic.h"
 #include "nonstdio.h"
 
 void (*volatile spi_callback)(void); //SPI callback when xfer complete.
-- 
cgit v1.2.3


From ecc971c613d4a7dfe31bc142f99bfdba898d91eb Mon Sep 17 00:00:00 2001
From: Nick Foster <nick@nerdnetworks.org>
Date: Wed, 11 Aug 2010 13:42:03 -0700
Subject: IRQ-based SPI works. Don't try to do multiple transactions without
 waiting for results first. In fact, don't try to do an I2C transaction while
 an SPI transaction is pending.

---
 firmware/microblaze/apps/txrx_uhd.c |  7 ++-----
 firmware/microblaze/lib/spi.c       | 23 ++++++++++++++---------
 firmware/microblaze/lib/spi.h       |  8 ++++----
 3 files changed, 20 insertions(+), 18 deletions(-)

(limited to 'firmware')

diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c
index 6fb01fec2..1dd6e80ac 100644
--- a/firmware/microblaze/apps/txrx_uhd.c
+++ b/firmware/microblaze/apps/txrx_uhd.c
@@ -194,7 +194,7 @@ void i2c_write_done_callback(void) {
 static volatile bool spi_done = false;
 static volatile uint32_t spi_readback_data;
 void get_spi_readback_data(void) {
-  spi_readback_data = spi_get_data();
+  ctrl_data_out.data.spi_args.data = spi_get_data();
   spi_done = true;
   spi_register_callback(0);
 }
@@ -245,8 +245,6 @@ void handle_udp_ctrl_packet(
      ******************************************************************/
     case USRP2_CTRL_ID_TRANSACT_ME_SOME_SPI_BRO:{
             //transact
-            uint32_t result;
-            void (*volatile spicall)(void) = (ctrl_data_in->data.spi_args.readback == 0) ? 0 : get_spi_readback_data; //only need a callback if we're doing readback
             bool success = spi_async_transact(
                 //(ctrl_data_in->data.spi_args.readback == 0)? SPI_TXONLY : SPI_TXRX,
                 ctrl_data_in->data.spi_args.dev,      //which device
@@ -254,11 +252,10 @@ void handle_udp_ctrl_packet(
                 ctrl_data_in->data.spi_args.num_bits, //length in bits
                 (ctrl_data_in->data.spi_args.mosi_edge == USRP2_CLK_EDGE_RISE)? SPIF_PUSH_FALL : SPIF_PUSH_RISE | //flags
                 (ctrl_data_in->data.spi_args.miso_edge == USRP2_CLK_EDGE_RISE)? SPIF_LATCH_RISE : SPIF_LATCH_FALL,
-                spicall //callback
+                get_spi_readback_data //callback
             );
 
             //load output
-            ctrl_data_out.data.spi_args.data = result;
             ctrl_data_out.id = USRP2_CTRL_ID_OMG_TRANSACTED_SPI_DUDE;
             spi_src = src;
         }
diff --git a/firmware/microblaze/lib/spi.c b/firmware/microblaze/lib/spi.c
index 33fcce05f..2a41a1bfa 100644
--- a/firmware/microblaze/lib/spi.c
+++ b/firmware/microblaze/lib/spi.c
@@ -22,6 +22,8 @@
 
 void (*volatile spi_callback)(void); //SPI callback when xfer complete.
 
+static void spi_irq_handler(unsigned irq);
+
 void
 spi_init(void) 
 {
@@ -68,8 +70,10 @@ void spi_register_callback(void (*volatile callback)(void)) {
   spi_callback = callback;
 }
 
-void spi_irq_handler(void) {
-  printf("SPI IRQ handler\n");
+static void spi_irq_handler(unsigned irq) {
+//  printf("SPI IRQ handler\n");
+//  uint32_t wat = spi_regs->ctrl; //read a register just to clear the interrupt
+  //spi_regs->ctrl &= ~SPI_CTRL_IE;
   if(spi_callback) spi_callback(); //we could just use the PIC to register the user's callback, but this provides the ability to do other things later
 }
 
@@ -80,9 +84,12 @@ uint32_t spi_get_data(void) {
 bool 
 spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void)) {
   flags &= (SPI_CTRL_TXNEG | SPI_CTRL_RXNEG);
-  int ctrl = SPI_CTRL_ASS | (SPI_CTRL_CHAR_LEN_MASK & length) | flags;
+  int ctrl = SPI_CTRL_ASS | SPI_CTRL_IE | (SPI_CTRL_CHAR_LEN_MASK & length) | flags;
 
-  if(spi_regs->ctrl & SPI_CTRL_GO_BSY) return false; //we don't wait on busy, we just return failure.
+  if(spi_regs->ctrl & SPI_CTRL_GO_BSY) {
+    printf("Async SPI busy!\n");
+    return false; //we don't wait on busy, we just return failure. we count on the host to not set up another transaction before the last one finishes.
+  }
 
   // Tell it which SPI slave device to access
   spi_regs->ss = slave & 0xffff;
@@ -90,14 +97,12 @@ spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*
   // Data we will send
   spi_regs->txrx0 = data;
 
+  spi_register_callback(callback);
+  pic_register_handler(IRQ_SPI, spi_irq_handler);
+
   // Run it -- write once and rewrite with GO set
   spi_regs->ctrl = ctrl;
   spi_regs->ctrl = ctrl | SPI_CTRL_GO_BSY;
 
-  spi_regs->ctrl |= SPI_CTRL_IE; //we do these here so that we don't have to start the PIC before the SPI sets up the clocks on startup
-  pic_register_handler(IRQ_SPI, spi_irq_handler);
-
-  spi_register_callback(callback);
-
   return true;
 }
diff --git a/firmware/microblaze/lib/spi.h b/firmware/microblaze/lib/spi.h
index 18699f21a..54618cedd 100644
--- a/firmware/microblaze/lib/spi.h
+++ b/firmware/microblaze/lib/spi.h
@@ -48,13 +48,13 @@ void spi_wait(void);
 uint32_t
 spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags);
 
-bool 
-spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void));
-
 uint32_t spi_get_data(void);
-void spi_irq_handler(void);
+//static void spi_irq_handler(unsigned irq);
 void spi_register_callback(void (*volatile callback)(void));
 
+bool 
+spi_async_transact(int slave, uint32_t data, int length, uint32_t flags, void (*volatile callback)(void));
+
 // ----------------------------------------------------------------
 // Routines that manipulate the FLASH SPI BUS
 // ----------------------------------------------------------------
-- 
cgit v1.2.3


From 288f932423e96424fc4bb3b473c0247594e242e2 Mon Sep 17 00:00:00 2001
From: Nick Foster <nick@nerdnetworks.org>
Date: Mon, 16 Aug 2010 17:44:05 -0700
Subject: usrp2: don't forward dbsm errors

---
 firmware/microblaze/lib/dbsm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

(limited to 'firmware')

diff --git a/firmware/microblaze/lib/dbsm.c b/firmware/microblaze/lib/dbsm.c
index d495860fd..cee343eaa 100644
--- a/firmware/microblaze/lib/dbsm.c
+++ b/firmware/microblaze/lib/dbsm.c
@@ -160,12 +160,12 @@ dbsm_process_status(dbsm_t *sm, uint32_t status)
     putchar('E');
     // Most likely an ethernet Rx error.  We just restart the transfer.
     if (status & (BPS_ERROR(sm->buf0)))
-      //dbsm_error_helper(sm, sm->buf0);
-      dbsm_process_helper(sm, sm->buf0); //forward errors
+      dbsm_error_helper(sm, sm->buf0);
+      //dbsm_process_helper(sm, sm->buf0); //forward errors
 
     if (status & (BPS_ERROR(sm->buf0 ^ 1)))
-      //dbsm_error_helper(sm, sm->buf0 ^ 1);
-      dbsm_process_helper(sm, sm->buf0 ^ 1); //forward errors
+      dbsm_error_helper(sm, sm->buf0 ^ 1);
+      //dbsm_process_helper(sm, sm->buf0 ^ 1); //forward errors
   }
 
   if (status & BPS_DONE(sm->buf0))
-- 
cgit v1.2.3