From 4240d5a2a1b705fe8ed5c3a1d1deef24be00d444 Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Fri, 30 Jul 2010 12:43:41 -0700 Subject: usrp2: reorganized firmware directory --- firmware/microblaze/.gitignore | 2 + firmware/microblaze/Makefile.am | 5 +- firmware/microblaze/Makefile.common | 37 +- firmware/microblaze/apps/.gitignore | 8 - firmware/microblaze/apps/Makefile.am | 82 --- firmware/microblaze/apps/app_passthru_v2.c | 251 ------- firmware/microblaze/apps/app_passthru_v2.h | 54 -- firmware/microblaze/apps/blink_leds.c | 40 -- firmware/microblaze/apps/blink_leds2.c | 53 -- firmware/microblaze/apps/buf_ram_test.c | 89 --- firmware/microblaze/apps/burn_dbsrx_eeprom.c | 106 --- firmware/microblaze/apps/burnrev30.c | 162 ----- firmware/microblaze/apps/burnrev31.c | 162 ----- firmware/microblaze/apps/burnrev40.c | 162 ----- firmware/microblaze/apps/can_i_sub.c | 25 - firmware/microblaze/apps/cruft/Makefile.am | 82 +++ firmware/microblaze/apps/cruft/app_passthru_v2.c | 251 +++++++ firmware/microblaze/apps/cruft/app_passthru_v2.h | 54 ++ firmware/microblaze/apps/cruft/blink_leds.c | 40 ++ firmware/microblaze/apps/cruft/blink_leds2.c | 53 ++ firmware/microblaze/apps/cruft/buf_ram_test.c | 89 +++ firmware/microblaze/apps/cruft/burn_dbsrx_eeprom.c | 106 +++ firmware/microblaze/apps/cruft/burnrev30.c | 162 +++++ firmware/microblaze/apps/cruft/burnrev31.c | 162 +++++ firmware/microblaze/apps/cruft/can_i_sub.c | 25 + .../microblaze/apps/cruft/double_buffer_fragment.c | 138 ++++ firmware/microblaze/apps/cruft/echo.c | 34 + firmware/microblaze/apps/cruft/eth_serdes.c | 233 ++++++ firmware/microblaze/apps/cruft/factory_test.c | 438 +++++++++++ firmware/microblaze/apps/cruft/gen_eth_packets.c | 187 +++++ firmware/microblaze/apps/cruft/gen_pause_frames.c | 207 ++++++ firmware/microblaze/apps/cruft/hello.c | 30 + firmware/microblaze/apps/cruft/ibs_rx_test.c | 82 +++ firmware/microblaze/apps/cruft/ibs_tx_test.c | 160 +++++ .../microblaze/apps/cruft/mimo_app_common_v2.c | 582 +++++++++++++++ .../microblaze/apps/cruft/mimo_app_common_v2.h | 63 ++ firmware/microblaze/apps/cruft/mimo_tx.c | 363 ++++++++++ firmware/microblaze/apps/cruft/mimo_tx_slave.c | 376 ++++++++++ firmware/microblaze/apps/cruft/rcv_eth_packets.c | 233 ++++++ firmware/microblaze/apps/cruft/read_dbids.c | 59 ++ firmware/microblaze/apps/cruft/sd_bounce.c | 153 ++++ firmware/microblaze/apps/cruft/sd_gentest.c | 269 +++++++ firmware/microblaze/apps/cruft/serdes_to_dsp.c | 179 +++++ firmware/microblaze/apps/cruft/serdes_txrx.c | 368 ++++++++++ firmware/microblaze/apps/cruft/set_hw_rev.c | 45 ++ firmware/microblaze/apps/cruft/test1.c | 282 ++++++++ firmware/microblaze/apps/cruft/test_db_spi.c | 35 + firmware/microblaze/apps/cruft/test_i2c.c | 108 +++ firmware/microblaze/apps/cruft/test_lsadc.c | 57 ++ firmware/microblaze/apps/cruft/test_lsdac.c | 51 ++ firmware/microblaze/apps/cruft/test_phy_comm.c | 113 +++ firmware/microblaze/apps/cruft/test_ram.c | 105 +++ firmware/microblaze/apps/cruft/test_sd.c | 81 +++ firmware/microblaze/apps/cruft/timer_test.c | 57 ++ firmware/microblaze/apps/cruft/tx_standalone.c | 339 +++++++++ firmware/microblaze/apps/double_buffer_fragment.c | 138 ---- firmware/microblaze/apps/echo.c | 34 - firmware/microblaze/apps/eth_serdes.c | 233 ------ firmware/microblaze/apps/factory_test.c | 438 ----------- firmware/microblaze/apps/gen_eth_packets.c | 187 ----- firmware/microblaze/apps/gen_pause_frames.c | 207 ------ firmware/microblaze/apps/hello.c | 30 - firmware/microblaze/apps/ibs_rx_test.c | 82 --- firmware/microblaze/apps/ibs_tx_test.c | 160 ----- firmware/microblaze/apps/mimo_app_common_v2.c | 582 --------------- firmware/microblaze/apps/mimo_app_common_v2.h | 63 -- firmware/microblaze/apps/mimo_tx.c | 363 ---------- firmware/microblaze/apps/mimo_tx_slave.c | 376 ---------- firmware/microblaze/apps/rcv_eth_packets.c | 233 ------ firmware/microblaze/apps/read_dbids.c | 59 -- firmware/microblaze/apps/sd_bounce.c | 153 ---- firmware/microblaze/apps/sd_gentest.c | 269 ------- firmware/microblaze/apps/serdes_to_dsp.c | 179 ----- firmware/microblaze/apps/serdes_txrx.c | 368 ---------- firmware/microblaze/apps/set_hw_rev.c | 45 -- firmware/microblaze/apps/test1.c | 282 -------- firmware/microblaze/apps/test_db_spi.c | 35 - firmware/microblaze/apps/test_i2c.c | 108 --- firmware/microblaze/apps/test_lsadc.c | 57 -- firmware/microblaze/apps/test_lsdac.c | 51 -- firmware/microblaze/apps/test_phy_comm.c | 113 --- firmware/microblaze/apps/test_ram.c | 105 --- firmware/microblaze/apps/test_sd.c | 81 --- firmware/microblaze/apps/timer_test.c | 57 -- firmware/microblaze/apps/tx_standalone.c | 339 --------- firmware/microblaze/apps/txrx_uhd.c | 3 +- firmware/microblaze/bootstrap | 1 + firmware/microblaze/config.guess | 1 - firmware/microblaze/config.sub | 1 - firmware/microblaze/configure.ac | 6 +- firmware/microblaze/include/.gitignore | 2 - firmware/microblaze/include/Makefile.am | 30 - firmware/microblaze/include/compiler.h | 25 - firmware/microblaze/include/net/.gitignore | 2 - firmware/microblaze/include/net/Makefile.am | 23 - firmware/microblaze/include/net/eth_mac_addr.h | 29 - firmware/microblaze/include/net/padded_eth_hdr.h | 37 - firmware/microblaze/include/net/socket_address.h | 41 -- firmware/microblaze/include/usrp2_clock_bits.h | 55 -- firmware/microblaze/include/usrp2_fpga_regs.h | 80 --- firmware/microblaze/include/usrp2_i2c_addr.h | 78 -- firmware/microblaze/include/usrp2_types.h | 105 --- firmware/microblaze/include/vrt/bits.h | 92 --- firmware/microblaze/include/vrt/types.h | 138 ---- firmware/microblaze/lib/.gitignore | 40 -- firmware/microblaze/lib/Makefile.am | 87 --- firmware/microblaze/lib/Makefile.inc | 47 ++ firmware/microblaze/lib/clock_bits.h | 55 ++ firmware/microblaze/lib/clocks.c | 81 ++- firmware/microblaze/lib/clocks.h | 8 +- firmware/microblaze/lib/compiler.h | 25 + firmware/microblaze/lib/eth_mac.c | 10 +- firmware/microblaze/lib/eth_phy.h | 219 ------ firmware/microblaze/lib/ethernet.c | 390 ---------- firmware/microblaze/lib/hal_io.c | 10 + firmware/microblaze/lib/hal_io.h | 1 + firmware/microblaze/lib/hal_uart.c | 13 +- firmware/microblaze/lib/hal_uart.h | 10 + firmware/microblaze/lib/memory_map.h | 792 -------------------- firmware/microblaze/lib/net/.gitignore | 2 + firmware/microblaze/lib/net/eth_mac_addr.h | 29 + firmware/microblaze/lib/net/padded_eth_hdr.h | 37 + firmware/microblaze/lib/net/socket_address.h | 41 ++ firmware/microblaze/lib/nonstdio.c | 43 ++ firmware/microblaze/lib/nonstdio.h | 10 +- firmware/microblaze/lib/pic.c | 2 +- firmware/microblaze/lib/sd.c | 197 ----- firmware/microblaze/lib/sd.h | 122 ---- firmware/microblaze/lib/spi.c | 2 +- firmware/microblaze/lib/spi.h | 18 + firmware/microblaze/lib/u2_init.c | 11 +- firmware/microblaze/usrp2/.gitignore | 9 + firmware/microblaze/usrp2/Makefile.am | 43 ++ firmware/microblaze/usrp2/eth_phy.h | 219 ++++++ firmware/microblaze/usrp2/ethernet.c | 389 ++++++++++ firmware/microblaze/usrp2/memory_map.h | 797 +++++++++++++++++++++ firmware/microblaze/usrp2/sd.c | 197 +++++ firmware/microblaze/usrp2/sd.h | 122 ++++ 138 files changed, 8655 insertions(+), 9288 deletions(-) delete mode 100644 firmware/microblaze/apps/.gitignore delete mode 100644 firmware/microblaze/apps/Makefile.am delete mode 100644 firmware/microblaze/apps/app_passthru_v2.c delete mode 100644 firmware/microblaze/apps/app_passthru_v2.h delete mode 100644 firmware/microblaze/apps/blink_leds.c delete mode 100644 firmware/microblaze/apps/blink_leds2.c delete mode 100644 firmware/microblaze/apps/buf_ram_test.c delete mode 100644 firmware/microblaze/apps/burn_dbsrx_eeprom.c delete mode 100644 firmware/microblaze/apps/burnrev30.c delete mode 100644 firmware/microblaze/apps/burnrev31.c delete mode 100644 firmware/microblaze/apps/burnrev40.c delete mode 100644 firmware/microblaze/apps/can_i_sub.c create mode 100644 firmware/microblaze/apps/cruft/Makefile.am create mode 100644 firmware/microblaze/apps/cruft/app_passthru_v2.c create mode 100644 firmware/microblaze/apps/cruft/app_passthru_v2.h create mode 100644 firmware/microblaze/apps/cruft/blink_leds.c create mode 100644 firmware/microblaze/apps/cruft/blink_leds2.c create mode 100644 firmware/microblaze/apps/cruft/buf_ram_test.c create mode 100644 firmware/microblaze/apps/cruft/burn_dbsrx_eeprom.c create mode 100644 firmware/microblaze/apps/cruft/burnrev30.c create mode 100644 firmware/microblaze/apps/cruft/burnrev31.c create mode 100644 firmware/microblaze/apps/cruft/can_i_sub.c create mode 100644 firmware/microblaze/apps/cruft/double_buffer_fragment.c create mode 100644 firmware/microblaze/apps/cruft/echo.c create mode 100644 firmware/microblaze/apps/cruft/eth_serdes.c create mode 100644 firmware/microblaze/apps/cruft/factory_test.c create mode 100644 firmware/microblaze/apps/cruft/gen_eth_packets.c create mode 100644 firmware/microblaze/apps/cruft/gen_pause_frames.c create mode 100644 firmware/microblaze/apps/cruft/hello.c create mode 100644 firmware/microblaze/apps/cruft/ibs_rx_test.c create mode 100644 firmware/microblaze/apps/cruft/ibs_tx_test.c create mode 100644 firmware/microblaze/apps/cruft/mimo_app_common_v2.c create mode 100644 firmware/microblaze/apps/cruft/mimo_app_common_v2.h create mode 100644 firmware/microblaze/apps/cruft/mimo_tx.c create mode 100644 firmware/microblaze/apps/cruft/mimo_tx_slave.c create mode 100644 firmware/microblaze/apps/cruft/rcv_eth_packets.c create mode 100644 firmware/microblaze/apps/cruft/read_dbids.c create mode 100644 firmware/microblaze/apps/cruft/sd_bounce.c create mode 100644 firmware/microblaze/apps/cruft/sd_gentest.c create mode 100644 firmware/microblaze/apps/cruft/serdes_to_dsp.c create mode 100644 firmware/microblaze/apps/cruft/serdes_txrx.c create mode 100644 firmware/microblaze/apps/cruft/set_hw_rev.c create mode 100644 firmware/microblaze/apps/cruft/test1.c create mode 100644 firmware/microblaze/apps/cruft/test_db_spi.c create mode 100644 firmware/microblaze/apps/cruft/test_i2c.c create mode 100644 firmware/microblaze/apps/cruft/test_lsadc.c create mode 100644 firmware/microblaze/apps/cruft/test_lsdac.c create mode 100644 firmware/microblaze/apps/cruft/test_phy_comm.c create mode 100644 firmware/microblaze/apps/cruft/test_ram.c create mode 100644 firmware/microblaze/apps/cruft/test_sd.c create mode 100644 firmware/microblaze/apps/cruft/timer_test.c create mode 100644 firmware/microblaze/apps/cruft/tx_standalone.c delete mode 100644 firmware/microblaze/apps/double_buffer_fragment.c delete mode 100644 firmware/microblaze/apps/echo.c delete mode 100644 firmware/microblaze/apps/eth_serdes.c delete mode 100644 firmware/microblaze/apps/factory_test.c delete mode 100644 firmware/microblaze/apps/gen_eth_packets.c delete mode 100644 firmware/microblaze/apps/gen_pause_frames.c delete mode 100644 firmware/microblaze/apps/hello.c delete mode 100644 firmware/microblaze/apps/ibs_rx_test.c delete mode 100644 firmware/microblaze/apps/ibs_tx_test.c delete mode 100644 firmware/microblaze/apps/mimo_app_common_v2.c delete mode 100644 firmware/microblaze/apps/mimo_app_common_v2.h delete mode 100644 firmware/microblaze/apps/mimo_tx.c delete mode 100644 firmware/microblaze/apps/mimo_tx_slave.c delete mode 100644 firmware/microblaze/apps/rcv_eth_packets.c delete mode 100644 firmware/microblaze/apps/read_dbids.c delete mode 100644 firmware/microblaze/apps/sd_bounce.c delete mode 100644 firmware/microblaze/apps/sd_gentest.c delete mode 100644 firmware/microblaze/apps/serdes_to_dsp.c delete mode 100644 firmware/microblaze/apps/serdes_txrx.c delete mode 100644 firmware/microblaze/apps/set_hw_rev.c delete mode 100644 firmware/microblaze/apps/test1.c delete mode 100644 firmware/microblaze/apps/test_db_spi.c delete mode 100644 firmware/microblaze/apps/test_i2c.c delete mode 100644 firmware/microblaze/apps/test_lsadc.c delete mode 100644 firmware/microblaze/apps/test_lsdac.c delete mode 100644 firmware/microblaze/apps/test_phy_comm.c delete mode 100644 firmware/microblaze/apps/test_ram.c delete mode 100644 firmware/microblaze/apps/test_sd.c delete mode 100644 firmware/microblaze/apps/timer_test.c delete mode 100644 firmware/microblaze/apps/tx_standalone.c delete mode 120000 firmware/microblaze/config.guess delete mode 120000 firmware/microblaze/config.sub delete mode 100644 firmware/microblaze/include/.gitignore delete mode 100644 firmware/microblaze/include/Makefile.am delete mode 100644 firmware/microblaze/include/compiler.h delete mode 100644 firmware/microblaze/include/net/.gitignore delete mode 100644 firmware/microblaze/include/net/Makefile.am delete mode 100644 firmware/microblaze/include/net/eth_mac_addr.h delete mode 100644 firmware/microblaze/include/net/padded_eth_hdr.h delete mode 100644 firmware/microblaze/include/net/socket_address.h delete mode 100644 firmware/microblaze/include/usrp2_clock_bits.h delete mode 100644 firmware/microblaze/include/usrp2_fpga_regs.h delete mode 100644 firmware/microblaze/include/usrp2_i2c_addr.h delete mode 100644 firmware/microblaze/include/usrp2_types.h delete mode 100644 firmware/microblaze/include/vrt/bits.h delete mode 100644 firmware/microblaze/include/vrt/types.h delete mode 100644 firmware/microblaze/lib/.gitignore delete mode 100644 firmware/microblaze/lib/Makefile.am create mode 100644 firmware/microblaze/lib/Makefile.inc create mode 100644 firmware/microblaze/lib/clock_bits.h create mode 100644 firmware/microblaze/lib/compiler.h delete mode 100644 firmware/microblaze/lib/eth_phy.h delete mode 100644 firmware/microblaze/lib/ethernet.c delete mode 100644 firmware/microblaze/lib/memory_map.h create mode 100644 firmware/microblaze/lib/net/.gitignore create mode 100644 firmware/microblaze/lib/net/eth_mac_addr.h create mode 100644 firmware/microblaze/lib/net/padded_eth_hdr.h create mode 100644 firmware/microblaze/lib/net/socket_address.h delete mode 100644 firmware/microblaze/lib/sd.c delete mode 100644 firmware/microblaze/lib/sd.h create mode 100644 firmware/microblaze/usrp2/.gitignore create mode 100644 firmware/microblaze/usrp2/Makefile.am create mode 100644 firmware/microblaze/usrp2/eth_phy.h create mode 100644 firmware/microblaze/usrp2/ethernet.c create mode 100644 firmware/microblaze/usrp2/memory_map.h create mode 100644 firmware/microblaze/usrp2/sd.c create mode 100644 firmware/microblaze/usrp2/sd.h (limited to 'firmware') diff --git a/firmware/microblaze/.gitignore b/firmware/microblaze/.gitignore index 068f01838..e867fe87c 100644 --- a/firmware/microblaze/.gitignore +++ b/firmware/microblaze/.gitignore @@ -5,6 +5,8 @@ /*.log /*.rom /.deps +/*.guess +/*.sub /Makefile /Makefile.in /aclocal.m4 diff --git a/firmware/microblaze/Makefile.am b/firmware/microblaze/Makefile.am index 676c4fe42..6316b31a2 100644 --- a/firmware/microblaze/Makefile.am +++ b/firmware/microblaze/Makefile.am @@ -22,6 +22,5 @@ include $(top_srcdir)/Makefile.common EXTRA_DIST = \ u2_flash_tool -SUBDIRS = include lib apps - - +SUBDIRS = \ + usrp2 diff --git a/firmware/microblaze/Makefile.common b/firmware/microblaze/Makefile.common index 3d0f540d8..ceb6a553a 100644 --- a/firmware/microblaze/Makefile.common +++ b/firmware/microblaze/Makefile.common @@ -17,6 +17,8 @@ # along with this program. If not, see . # +include $(top_srcdir)/lib/Makefile.inc + ######################################################################## # lwIP header include dirs ######################################################################## @@ -28,13 +30,6 @@ LWIP_INCLUDES = \ -I$(LWIPDIR)/src/include \ -I$(LWIPDIR)/src/include/ipv4 -######################################################################## -# local include dirs -######################################################################## -LOCAL_INCLUDES = \ - -I$(top_srcdir)/include \ - -I$(top_srcdir)/lib - ######################################################################## # misc flags for the mb-gcc compiler ######################################################################## @@ -42,8 +37,6 @@ MBGCC_CFLAGS = \ --std=gnu99 -Wall -Werror-implicit-function-declaration \ -mxl-soft-div -msoft-float -mxl-soft-mul -mxl-barrel-shift -MBGCC_LFLAGS = -Wl,-defsym -Wl,_STACK_SIZE=3072 - ######################################################################## # define for the hal io (FIXME move?) ######################################################################## @@ -51,31 +44,39 @@ MBGCC_LFLAGS = -Wl,-defsym -Wl,_STACK_SIZE=3072 HAL_IO = -DHAL_IO_USES_UART ######################################################################## -# set the cflags and ldflags +# common cflags and ldflags ######################################################################## -AM_CFLAGS = $(MBGCC_CFLAGS) $(LOCAL_INCLUDES) $(LWIP_INCLUDES) $(HAL_IO) +COMMON_CFLAGS = \ + -I$(top_srcdir)/../../host/lib/usrp \ + -I$(top_srcdir)/lib \ + $(MBGCC_CFLAGS) \ + $(LWIP_INCLUDES) \ + $(HAL_IO) -AM_LDFLAGS = $(MBGCC_LFLAGS) +COMMON_LFLAGS = \ + -Wl,-Map -Wl,$(@:.elf=.map) ######################################################################## # Common stuff for building top level microblaze images ######################################################################## -AM_LDFLAGS += -Wl,-Map -Wl,$(@:.elf=.map) - -%.bin : %.elf +.elf.bin: $(MB_OBJCOPY) -O binary $< $@ -%.dump : %.elf +.elf.dump: $(MB_OBJDUMP) -DSC $< > $@ -%.rom : %.bin +.bin.rom: $(HEXDUMP) -v -e'1/1 "%.2X\n"' $< > $@ +.elf.ihx: + $(MB_OBJCOPY) -O ihex $(COMMON_IHX_ARGS) $< $@ + _generated_from_elf = \ $(noinst_PROGRAMS:.elf=.map) \ $(noinst_PROGRAMS:.elf=.bin) \ $(noinst_PROGRAMS:.elf=.dump) \ - $(noinst_PROGRAMS:.elf=.rom) + $(noinst_PROGRAMS:.elf=.rom) \ + $(noinst_PROGRAMS:.elf=.ihx) noinst_DATA = $(_generated_from_elf) diff --git a/firmware/microblaze/apps/.gitignore b/firmware/microblaze/apps/.gitignore deleted file mode 100644 index 968b04cd7..000000000 --- a/firmware/microblaze/apps/.gitignore +++ /dev/null @@ -1,8 +0,0 @@ -/*.elf -/*.bin -/*.dump -/*.log -/*.rom -/*.map -/Makefile -/Makefile.in diff --git a/firmware/microblaze/apps/Makefile.am b/firmware/microblaze/apps/Makefile.am deleted file mode 100644 index a4f79935b..000000000 --- a/firmware/microblaze/apps/Makefile.am +++ /dev/null @@ -1,82 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007,2008 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -include $(top_srcdir)/Makefile.common - -LDADD = $(top_srcdir)/lib/libu2fw.a - -AM_CFLAGS += -I$(top_srcdir)/../../host/lib/usrp - -noinst_PROGRAMS = txrx_uhd.elf - -# blink_leds \ -# blink_leds2 \ -# buf_ram_test \ -# burn_dbsrx_eeprom \ -# can_i_sub \ -# echo \ -# hello \ -# read_dbids \ -# set_hw_rev \ -# test1 \ -# test_db_spi \ -# test_i2c \ -# test_sd \ -# test_ram \ -# test_phy_comm \ -# test_lsadc \ -# test_lsdac \ -# timer_test \ -# txrx \ -# burnrev30 \ -# burnrev31 \ -# burnrev40 \ -# sd_gentest \ -# sd_bounce -# - -#nononono = \ -# eth_serdes \ -# gen_eth_packets \ -# rcv_eth_packets \ -# tx_standalone \ -# factory_test \ -# serdes_txrx \ -# mimo_tx \ -# mimo_tx_slave \ -# ibs_rx_test \ -# ibs_tx_test - -# tx_drop_SOURCES = tx_drop.c app_common.c -# tx_drop_rate_limited_SOURCES = tx_drop_rate_limited.c app_common.c -# tx_drop2_SOURCES = tx_drop2.c app_common.c -txrx_uhd_elf_SOURCES = txrx_uhd.c -# app_common_v2.c -#factory_test_SOURCES = factory_test.c app_common_v2.c -#eth_serdes_SOURCES = eth_serdes.c app_passthru_v2.c -#serdes_txrx_SOURCES = serdes_txrx.c app_common_v2.c -#mimo_tx_SOURCES = mimo_tx.c mimo_app_common_v2.c -#mimo_tx_slave_SOURCES = mimo_tx_slave.c app_common_v2.c - -#noinst_HEADERS = \ -# app_common_v2.h \ -# app_passthru_v2.h \ -# mimo_app_common_v2.h -# - diff --git a/firmware/microblaze/apps/app_passthru_v2.c b/firmware/microblaze/apps/app_passthru_v2.c deleted file mode 100644 index 406c56b3b..000000000 --- a/firmware/microblaze/apps/app_passthru_v2.c +++ /dev/null @@ -1,251 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "app_passthru_v2.h" -#include "buffer_pool.h" -#include "memcpy_wa.h" -#include "ethernet.h" -#include "nonstdio.h" -#include "print_rmon_regs.h" -#include "db.h" -#include "clocks.h" -#include - -volatile bool link_is_up = false; // eth handler sets this - - -// If this is non-zero, this dbsm could be writing to the ethernet -dbsm_t *ac_could_be_sending_to_eth; - -//static unsigned char exp_seqno = 0; - -void -set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt) -{ - reply_pkt->ehdr.dst = cmd_pkt->ehdr.src; - reply_pkt->ehdr.src = *ethernet_mac_addr(); - reply_pkt->ehdr.ethertype = U2_ETHERTYPE; - reply_pkt->thdr.flags = 0; - reply_pkt->thdr.fifo_status = 0; // written by protocol engine - reply_pkt->thdr.seqno = 0; // written by protocol engine - reply_pkt->thdr.ack = 0; // written by protocol engine - u2p_set_word0(&reply_pkt->fixed, 0, CONTROL_CHAN); - reply_pkt->fixed.timestamp = timer_regs->time; -} - -static void -send_reply(unsigned char *reply, size_t reply_len) -{ - if (reply_len < 64) - reply_len = 64; - - // wait for buffer to become idle - hal_set_leds(0x4, 0x4); - while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) - ; - hal_set_leds(0x0, 0x4); - - // copy reply into CPU_TX_BUF - memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); - - // wait until nobody else is sending to the ethernet - if (ac_could_be_sending_to_eth){ - hal_set_leds(0x8, 0x8); - dbsm_wait_for_opening(ac_could_be_sending_to_eth); - hal_set_leds(0x0, 0x8); - } - - // fire it off - bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, reply_len/4); - - // wait for it to complete (not long, it's a small pkt) - while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) - ; - - bp_clear_buf(CPU_TX_BUF); -} - - -static size_t -op_id_cmd(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_id_reply_t *r = (op_id_reply_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) // no room - return 0; - - // Build reply subpacket - - r->opcode = OP_ID_REPLY; - r->len = sizeof(op_id_reply_t); - r->rid = p->rid; - r->addr = *ethernet_mac_addr(); - r->hw_rev = 0x0000; // FIXME - // r->fpga_md5sum = ; // FIXME - // r->sw_md5sum = ; // FIXME - - // FIXME Add d'board info, including dbid, min/max gain, min/max freq - - return r->len; -} - -static size_t -add_eop(void *reply_payload, size_t reply_payload_space) -{ - op_generic_t *r = (op_generic_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = OP_EOP; - r->len = sizeof(*r); - r->rid = 0; - r->ok = 0; - - return r->len; -} - -bool -handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len) -{ - unsigned char reply[sizeof(u2_eth_packet_t) + 4 * sizeof(u2_subpkt_t)] _AL4; - unsigned char *reply_payload = &reply[sizeof(u2_eth_packet_t)]; - int reply_payload_space = sizeof(reply) - sizeof(u2_eth_packet_t); - - bool handled_it = false; - - // initialize reply - memset(reply, 0, sizeof(reply)); - set_reply_hdr((u2_eth_packet_t *) reply, pkt); - - // point to beginning of payload (subpackets) - unsigned char *payload = ((unsigned char *) pkt) + sizeof(u2_eth_packet_t); - int payload_len = len - sizeof(u2_eth_packet_t); - - size_t subpktlen = 0; - - while (payload_len >= sizeof(op_generic_t)){ - const op_generic_t *gp = (const op_generic_t *) payload; - subpktlen = 0; - - switch(gp->opcode){ - case OP_EOP: // end of subpackets - goto end_of_subpackets; - - case OP_ID: - subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); - handled_it = true; - break; - - default: - if (0){ - printf("\npassing on %d\n", gp->opcode); - } - break; - } - - int t = (gp->len + 3) & ~3; // bump to a multiple of 4 - payload += t; - payload_len -= t; - - subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 - reply_payload += subpktlen; - reply_payload_space -= subpktlen; - } - - end_of_subpackets: - - if (handled_it){ - // add the EOP marker - subpktlen = add_eop(reply_payload, reply_payload_space); - subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 - reply_payload += subpktlen; - reply_payload_space -= subpktlen; - - send_reply(reply, reply_payload - reply); - } - - return handled_it; -} - - -/* - * Called when an ethernet packet is received. - * Return true if we handled it here, otherwise - * it'll be passed on to the DSP Tx pipe - */ -bool -eth_pkt_inspector(dbsm_t *sm, int bufno) -{ - u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); - size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; - - //static size_t last_len = 0; - - // hal_toggle_leds(0x1); - - // inspect rcvd frame and figure out what do do. - - if (pkt->ehdr.ethertype != U2_ETHERTYPE) - return true; // ignore, probably bogus PAUSE frame from MAC - - int chan = u2p_chan(&pkt->fixed); - - switch (chan){ - case CONTROL_CHAN: - return handle_control_chan_frame(pkt, byte_len); - break; - - case 0: - default: -#if 0 - if (last_len != 0){ - if (byte_len != last_len){ - printf("Len: %d last: %d\n", byte_len, last_len); - } - } - last_len = byte_len; - - if((pkt->thdr.seqno) == exp_seqno){ - exp_seqno++; - //putchar('.'); - } - else { - // putchar('S'); - //printf("S%d %d ",exp_seqno,pkt->thdr.seqno); - exp_seqno = pkt->thdr.seqno + 1; - } -#endif - return false; // pass it on to Tx DSP - break; - } -} - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - link_is_up = speed != 0; - hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); - printf("\neth link changed: speed = %d\n", speed); -} diff --git a/firmware/microblaze/apps/app_passthru_v2.h b/firmware/microblaze/apps/app_passthru_v2.h deleted file mode 100644 index 3904c670f..000000000 --- a/firmware/microblaze/apps/app_passthru_v2.h +++ /dev/null @@ -1,54 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef INCLUDED_APP_COMMON_H -#define INCLUDED_APP_COMMON_H - -#include -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "memory_map.h" -#include "hal_io.h" -#include -#include - -#define CPU_TX_BUF 7 // cpu -> eth - -#define _AL4 __attribute__((aligned (4))) - -extern volatile bool link_is_up; // eth handler sets this - - -// If there's a dbsm that sends to the ethernet, put it's address here -extern dbsm_t *ac_could_be_sending_to_eth; - - -void set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt); - -/* - * Called when an ethernet packet is received. - * Return true if we handled it here, otherwise - * it'll be passed on to the DSP Tx pipe - */ -bool eth_pkt_inspector(dbsm_t *sm, int bufno); - -void link_changed_callback(int speed); - -bool handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len); - -#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/blink_leds.c b/firmware/microblaze/apps/blink_leds.c deleted file mode 100644 index 682ca8db2..000000000 --- a/firmware/microblaze/apps/blink_leds.c +++ /dev/null @@ -1,40 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "hal_io.h" -#include "nonstdio.h" - -int -main(void) -{ - int counter = 0; - - u2_init(); - - putstr("blink_leds\n"); - while(1){ - output_regs->leds = (counter++ & 0x3); - } - - return 0; -} diff --git a/firmware/microblaze/apps/blink_leds2.c b/firmware/microblaze/apps/blink_leds2.c deleted file mode 100644 index 13e78afb3..000000000 --- a/firmware/microblaze/apps/blink_leds2.c +++ /dev/null @@ -1,53 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "hal_io.h" -#include "pic.h" -#include "nonstdio.h" - -//#define DELTA_T (MASTER_CLK_RATE/2) // 0.5s (10ns per tick) -#define DELTA_T 5000 // 5 us (10ns per tick) - - -void -timer_handler(unsigned irq) -{ - hal_set_timeout(DELTA_T); // schedule next timeout - hal_toggle_leds(0x2); -} - -int -main(void) -{ - u2_init(); - - putstr("blink_leds2\n"); - pic_register_handler(IRQ_ONETIME, timer_handler); - hal_set_timeout(DELTA_T); // schedule next timeout - - while(1){ - hal_toggle_leds(0x1); - } - - return 0; -} diff --git a/firmware/microblaze/apps/buf_ram_test.c b/firmware/microblaze/apps/buf_ram_test.c deleted file mode 100644 index 1aca2aec5..000000000 --- a/firmware/microblaze/apps/buf_ram_test.c +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "u2_init.h" -#include "memory_map.h" -#include -#include "nonstdio.h" -#include "hal_io.h" -#include "mdelay.h" - - -static void -write_bufs(void) -{ - int i, n; - int counter = 0; - - for (n = 0; n < NBUFFERS; n++){ - volatile int *p = buffer_ram(n); - for (i = 0; i < BP_NLINES; i++) - p[i] = counter++; - } -} - -// return number of errors detected -static int -check_bufs(void) -{ - int i, n; - int counter = 0; - int nerrors = 0; - - for (n = 0; n < NBUFFERS; n++){ - volatile int *p = buffer_ram(n); - for (i = 0; i < BP_NLINES; i++, counter++){ - int rd = p[i]; - if (rd != counter){ - putchar('b'); - putchar(n + '0'); - putchar('['); - puthex16(i); - putstr("] exp: "); - puthex32(counter); - putstr(" got: "); - puthex32_nl(rd); - nerrors++; - } - } - } - return nerrors; -} - - -int -main(void) -{ - u2_init(); - - output_regs->leds = 0; - - write_bufs(); - int nerrors = check_bufs(); - - if (nerrors == 0){ - output_regs->leds = 0x3; // leds on -> PASS - putstr("PASS\n"); - } - else { - output_regs->leds = 0x0; // leds off -> FAIL - putstr("FAIL\n"); - } - - hal_finish(); - return 0; -} diff --git a/firmware/microblaze/apps/burn_dbsrx_eeprom.c b/firmware/microblaze/apps/burn_dbsrx_eeprom.c deleted file mode 100644 index 116d4d8d0..000000000 --- a/firmware/microblaze/apps/burn_dbsrx_eeprom.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "i2c.h" -#include "usrp2_i2c_addr.h" -#include "mdelay.h" -#include "hal_io.h" -#include "nonstdio.h" -#include - - - -int read_dboard_eeprom(int i2c_addr); - - -#define USRP_DBID_DBS_RX 0x0002 -#define USRP_DBID_DBS_RX_WITH_CLOCK_MOD 0x000d - -const char dbs_rx_rev2_eeprom[] = { - 0xdb, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 -}; - -#define LED_VALS (LED_A | LED_B | LED_C | LED_D) -#define LED_MASK (LED_A | LED_B | LED_C | LED_D) - -int -main(void) -{ - u2_init(); - - puts("\nburn_dbsrx_eeprom\n"); - - hal_set_leds(0, ~0); // all off - - int i2c_addr = I2C_ADDR_RX_A; - int dbid = read_dboard_eeprom(i2c_addr); - bool ok; - const char *msg = 0; - - switch (dbid){ - case -1: - msg = "No RX daughterboard found"; - goto bad; - - case -2: - msg = "Invalid RX EEPROM contents"; - goto bad; - - case USRP_DBID_DBS_RX_WITH_CLOCK_MOD: - msg = "RX Daughterboard already reports being a DBS RX w/ CLOCK_MOD"; - goto good; - - case USRP_DBID_DBS_RX: - // Says it's a DBS_RX, attempt to burn the EEPROM - ok = eeprom_write(i2c_addr, 0, - dbs_rx_rev2_eeprom, sizeof(dbs_rx_rev2_eeprom)); - if (ok){ - msg = "Successfully programmed db as DBS RX Rev 2.1"; - goto good; - } - else { - msg = "Failed to write daugherboard eeprom"; - goto bad; - } - - default: - msg = "Daughterboard is not a DBS RX; ignored"; - goto bad; - } - - good: - puts(msg); - hal_set_leds(LED_VALS, LED_MASK); - while (1) - ; - - bad: - puts(msg); - while(1){ - hal_toggle_leds(LED_VALS); - mdelay(50); - } -} diff --git a/firmware/microblaze/apps/burnrev30.c b/firmware/microblaze/apps/burnrev30.c deleted file mode 100644 index 40fa53e34..000000000 --- a/firmware/microblaze/apps/burnrev30.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include -#include -#include -#include -#include -#include -#include "sd.h" -#include "mdelay.h" - -#define HW_REV_MAJOR 3 -#define HW_REV_MINOR 0 - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int test_sd() -{ - int i = sd_init(); - if(i==0) { - puts("FAILED INIT of Card\n"); - return 0; - } - - unsigned char buf[512]; - i = sd_read_block(2048,buf); - if(i == 0) { - puts("READ Command Rejected\n"); - return 0; - } - if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) - ; - else { - puts("Read bad data from SD Card\n"); - return 0; - } - return 1; -} - -int -main(void) -{ - u2_init(); - - putstr("\nFactory Test, Board Rev 3.0\n"); - - bool ok = true; - unsigned char maj = HW_REV_MAJOR; - unsigned char min = HW_REV_MINOR; - ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); - ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); - - putstr("\nset_hw_rev\n"); - if (ok) - printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - else { - printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - hal_finish(); - return 0; - } - - if(test_sd()) - puts("SD OK\n"); - else { - puts("SD FAIL\n"); - //hal_finish(); - //return 0; - } - if(test_ram()) - puts("RAM OK\n"); - else { - puts("RAM FAIL\n"); - hal_finish(); - return 0; - } - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - clocks_mimo_config(MC_WE_LOCK_TO_SMA); - - while (!clocks_lock_detect()) { - puts("No Lock"); - mdelay(1000); - } - puts("Clock Locked\n"); - -} diff --git a/firmware/microblaze/apps/burnrev31.c b/firmware/microblaze/apps/burnrev31.c deleted file mode 100644 index f6b08d187..000000000 --- a/firmware/microblaze/apps/burnrev31.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include -#include -#include -#include -#include -#include -#include "sd.h" -#include "mdelay.h" - -#define HW_REV_MAJOR 3 -#define HW_REV_MINOR 1 - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int test_sd() -{ - int i = sd_init(); - if(i==0) { - puts("FAILED INIT of Card\n"); - return 0; - } - - unsigned char buf[512]; - i = sd_read_block(2048,buf); - if(i == 0) { - puts("READ Command Rejected\n"); - return 0; - } - if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) - ; - else { - puts("Read bad data from SD Card\n"); - return 0; - } - return 1; -} - -int -main(void) -{ - u2_init(); - - putstr("\nFactory Test, Board Rev 3.1\n"); - - bool ok = true; - unsigned char maj = HW_REV_MAJOR; - unsigned char min = HW_REV_MINOR; - ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); - ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); - - putstr("\nset_hw_rev\n"); - if (ok) - printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - else { - printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - hal_finish(); - return 0; - } - - if(test_sd()) - puts("SD OK\n"); - else { - puts("SD FAIL\n"); - //hal_finish(); - //return 0; - } - if(test_ram()) - puts("RAM OK\n"); - else { - puts("RAM FAIL\n"); - hal_finish(); - return 0; - } - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - clocks_mimo_config(MC_WE_LOCK_TO_SMA); - - while (!clocks_lock_detect()) { - puts("No Lock"); - mdelay(1000); - } - puts("Clock Locked\n"); - -} diff --git a/firmware/microblaze/apps/burnrev40.c b/firmware/microblaze/apps/burnrev40.c deleted file mode 100644 index 362270961..000000000 --- a/firmware/microblaze/apps/burnrev40.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include -#include -#include -#include -#include -#include -#include "sd.h" -#include "mdelay.h" - -#define HW_REV_MAJOR 4 -#define HW_REV_MINOR 0 - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int test_sd() -{ - int i = sd_init(); - if(i==0) { - puts("FAILED INIT of Card\n"); - return 0; - } - - unsigned char buf[512]; - i = sd_read_block(2048,buf); - if(i == 0) { - puts("READ Command Rejected\n"); - return 0; - } - if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) - ; - else { - puts("Read bad data from SD Card\n"); - return 0; - } - return 1; -} - -int -main(void) -{ - u2_init(); - - putstr("\nFactory Test, Board Rev 4.0\n"); - - bool ok = true; - unsigned char maj = HW_REV_MAJOR; - unsigned char min = HW_REV_MINOR; - ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); - ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); - - putstr("\nset_hw_rev\n"); - if (ok) - printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - else { - printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - hal_finish(); - return 0; - } - - if(test_sd()) - puts("SD OK\n"); - else { - puts("SD FAIL\n"); - //hal_finish(); - //return 0; - } - if(test_ram()) - puts("RAM OK\n"); - else { - puts("RAM FAIL\n"); - hal_finish(); - return 0; - } - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - clocks_mimo_config(MC_WE_LOCK_TO_SMA); - - while (!clocks_lock_detect()) { - puts("No Lock"); - mdelay(1000); - } - puts("Clock Locked\n"); - -} diff --git a/firmware/microblaze/apps/can_i_sub.c b/firmware/microblaze/apps/can_i_sub.c deleted file mode 100644 index ed49791f0..000000000 --- a/firmware/microblaze/apps/can_i_sub.c +++ /dev/null @@ -1,25 +0,0 @@ -#include -#include - -//typedef long long int64_t; - - -int64_t sub(int64_t a, int64_t b); -void print(int64_t d); - -int main(void) -{ - u2_init(); - - int64_t d = sub(462550990848000LL, 462028800000000LL); - print_uint64(d); - newline(); - return 0; -} - -int64_t sub(int64_t a, int64_t b) -{ - return a - b; -} - - diff --git a/firmware/microblaze/apps/cruft/Makefile.am b/firmware/microblaze/apps/cruft/Makefile.am new file mode 100644 index 000000000..a4f79935b --- /dev/null +++ b/firmware/microblaze/apps/cruft/Makefile.am @@ -0,0 +1,82 @@ +# +# Copyright 2010 Ettus Research LLC +# +# Copyright 2007,2008 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# + +include $(top_srcdir)/Makefile.common + +LDADD = $(top_srcdir)/lib/libu2fw.a + +AM_CFLAGS += -I$(top_srcdir)/../../host/lib/usrp + +noinst_PROGRAMS = txrx_uhd.elf + +# blink_leds \ +# blink_leds2 \ +# buf_ram_test \ +# burn_dbsrx_eeprom \ +# can_i_sub \ +# echo \ +# hello \ +# read_dbids \ +# set_hw_rev \ +# test1 \ +# test_db_spi \ +# test_i2c \ +# test_sd \ +# test_ram \ +# test_phy_comm \ +# test_lsadc \ +# test_lsdac \ +# timer_test \ +# txrx \ +# burnrev30 \ +# burnrev31 \ +# burnrev40 \ +# sd_gentest \ +# sd_bounce +# + +#nononono = \ +# eth_serdes \ +# gen_eth_packets \ +# rcv_eth_packets \ +# tx_standalone \ +# factory_test \ +# serdes_txrx \ +# mimo_tx \ +# mimo_tx_slave \ +# ibs_rx_test \ +# ibs_tx_test + +# tx_drop_SOURCES = tx_drop.c app_common.c +# tx_drop_rate_limited_SOURCES = tx_drop_rate_limited.c app_common.c +# tx_drop2_SOURCES = tx_drop2.c app_common.c +txrx_uhd_elf_SOURCES = txrx_uhd.c +# app_common_v2.c +#factory_test_SOURCES = factory_test.c app_common_v2.c +#eth_serdes_SOURCES = eth_serdes.c app_passthru_v2.c +#serdes_txrx_SOURCES = serdes_txrx.c app_common_v2.c +#mimo_tx_SOURCES = mimo_tx.c mimo_app_common_v2.c +#mimo_tx_slave_SOURCES = mimo_tx_slave.c app_common_v2.c + +#noinst_HEADERS = \ +# app_common_v2.h \ +# app_passthru_v2.h \ +# mimo_app_common_v2.h +# + diff --git a/firmware/microblaze/apps/cruft/app_passthru_v2.c b/firmware/microblaze/apps/cruft/app_passthru_v2.c new file mode 100644 index 000000000..406c56b3b --- /dev/null +++ b/firmware/microblaze/apps/cruft/app_passthru_v2.c @@ -0,0 +1,251 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "app_passthru_v2.h" +#include "buffer_pool.h" +#include "memcpy_wa.h" +#include "ethernet.h" +#include "nonstdio.h" +#include "print_rmon_regs.h" +#include "db.h" +#include "clocks.h" +#include + +volatile bool link_is_up = false; // eth handler sets this + + +// If this is non-zero, this dbsm could be writing to the ethernet +dbsm_t *ac_could_be_sending_to_eth; + +//static unsigned char exp_seqno = 0; + +void +set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt) +{ + reply_pkt->ehdr.dst = cmd_pkt->ehdr.src; + reply_pkt->ehdr.src = *ethernet_mac_addr(); + reply_pkt->ehdr.ethertype = U2_ETHERTYPE; + reply_pkt->thdr.flags = 0; + reply_pkt->thdr.fifo_status = 0; // written by protocol engine + reply_pkt->thdr.seqno = 0; // written by protocol engine + reply_pkt->thdr.ack = 0; // written by protocol engine + u2p_set_word0(&reply_pkt->fixed, 0, CONTROL_CHAN); + reply_pkt->fixed.timestamp = timer_regs->time; +} + +static void +send_reply(unsigned char *reply, size_t reply_len) +{ + if (reply_len < 64) + reply_len = 64; + + // wait for buffer to become idle + hal_set_leds(0x4, 0x4); + while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) + ; + hal_set_leds(0x0, 0x4); + + // copy reply into CPU_TX_BUF + memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); + + // wait until nobody else is sending to the ethernet + if (ac_could_be_sending_to_eth){ + hal_set_leds(0x8, 0x8); + dbsm_wait_for_opening(ac_could_be_sending_to_eth); + hal_set_leds(0x0, 0x8); + } + + // fire it off + bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, reply_len/4); + + // wait for it to complete (not long, it's a small pkt) + while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) + ; + + bp_clear_buf(CPU_TX_BUF); +} + + +static size_t +op_id_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_id_reply_t *r = (op_id_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) // no room + return 0; + + // Build reply subpacket + + r->opcode = OP_ID_REPLY; + r->len = sizeof(op_id_reply_t); + r->rid = p->rid; + r->addr = *ethernet_mac_addr(); + r->hw_rev = 0x0000; // FIXME + // r->fpga_md5sum = ; // FIXME + // r->sw_md5sum = ; // FIXME + + // FIXME Add d'board info, including dbid, min/max gain, min/max freq + + return r->len; +} + +static size_t +add_eop(void *reply_payload, size_t reply_payload_space) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_EOP; + r->len = sizeof(*r); + r->rid = 0; + r->ok = 0; + + return r->len; +} + +bool +handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len) +{ + unsigned char reply[sizeof(u2_eth_packet_t) + 4 * sizeof(u2_subpkt_t)] _AL4; + unsigned char *reply_payload = &reply[sizeof(u2_eth_packet_t)]; + int reply_payload_space = sizeof(reply) - sizeof(u2_eth_packet_t); + + bool handled_it = false; + + // initialize reply + memset(reply, 0, sizeof(reply)); + set_reply_hdr((u2_eth_packet_t *) reply, pkt); + + // point to beginning of payload (subpackets) + unsigned char *payload = ((unsigned char *) pkt) + sizeof(u2_eth_packet_t); + int payload_len = len - sizeof(u2_eth_packet_t); + + size_t subpktlen = 0; + + while (payload_len >= sizeof(op_generic_t)){ + const op_generic_t *gp = (const op_generic_t *) payload; + subpktlen = 0; + + switch(gp->opcode){ + case OP_EOP: // end of subpackets + goto end_of_subpackets; + + case OP_ID: + subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); + handled_it = true; + break; + + default: + if (0){ + printf("\npassing on %d\n", gp->opcode); + } + break; + } + + int t = (gp->len + 3) & ~3; // bump to a multiple of 4 + payload += t; + payload_len -= t; + + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + } + + end_of_subpackets: + + if (handled_it){ + // add the EOP marker + subpktlen = add_eop(reply_payload, reply_payload_space); + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + + send_reply(reply, reply_payload - reply); + } + + return handled_it; +} + + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here, otherwise + * it'll be passed on to the DSP Tx pipe + */ +bool +eth_pkt_inspector(dbsm_t *sm, int bufno) +{ + u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); + size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; + + //static size_t last_len = 0; + + // hal_toggle_leds(0x1); + + // inspect rcvd frame and figure out what do do. + + if (pkt->ehdr.ethertype != U2_ETHERTYPE) + return true; // ignore, probably bogus PAUSE frame from MAC + + int chan = u2p_chan(&pkt->fixed); + + switch (chan){ + case CONTROL_CHAN: + return handle_control_chan_frame(pkt, byte_len); + break; + + case 0: + default: +#if 0 + if (last_len != 0){ + if (byte_len != last_len){ + printf("Len: %d last: %d\n", byte_len, last_len); + } + } + last_len = byte_len; + + if((pkt->thdr.seqno) == exp_seqno){ + exp_seqno++; + //putchar('.'); + } + else { + // putchar('S'); + //printf("S%d %d ",exp_seqno,pkt->thdr.seqno); + exp_seqno = pkt->thdr.seqno + 1; + } +#endif + return false; // pass it on to Tx DSP + break; + } +} + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + link_is_up = speed != 0; + hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); + printf("\neth link changed: speed = %d\n", speed); +} diff --git a/firmware/microblaze/apps/cruft/app_passthru_v2.h b/firmware/microblaze/apps/cruft/app_passthru_v2.h new file mode 100644 index 000000000..3904c670f --- /dev/null +++ b/firmware/microblaze/apps/cruft/app_passthru_v2.h @@ -0,0 +1,54 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef INCLUDED_APP_COMMON_H +#define INCLUDED_APP_COMMON_H + +#include +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "memory_map.h" +#include "hal_io.h" +#include +#include + +#define CPU_TX_BUF 7 // cpu -> eth + +#define _AL4 __attribute__((aligned (4))) + +extern volatile bool link_is_up; // eth handler sets this + + +// If there's a dbsm that sends to the ethernet, put it's address here +extern dbsm_t *ac_could_be_sending_to_eth; + + +void set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt); + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here, otherwise + * it'll be passed on to the DSP Tx pipe + */ +bool eth_pkt_inspector(dbsm_t *sm, int bufno); + +void link_changed_callback(int speed); + +bool handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len); + +#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/cruft/blink_leds.c b/firmware/microblaze/apps/cruft/blink_leds.c new file mode 100644 index 000000000..682ca8db2 --- /dev/null +++ b/firmware/microblaze/apps/cruft/blink_leds.c @@ -0,0 +1,40 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "hal_io.h" +#include "nonstdio.h" + +int +main(void) +{ + int counter = 0; + + u2_init(); + + putstr("blink_leds\n"); + while(1){ + output_regs->leds = (counter++ & 0x3); + } + + return 0; +} diff --git a/firmware/microblaze/apps/cruft/blink_leds2.c b/firmware/microblaze/apps/cruft/blink_leds2.c new file mode 100644 index 000000000..13e78afb3 --- /dev/null +++ b/firmware/microblaze/apps/cruft/blink_leds2.c @@ -0,0 +1,53 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "hal_io.h" +#include "pic.h" +#include "nonstdio.h" + +//#define DELTA_T (MASTER_CLK_RATE/2) // 0.5s (10ns per tick) +#define DELTA_T 5000 // 5 us (10ns per tick) + + +void +timer_handler(unsigned irq) +{ + hal_set_timeout(DELTA_T); // schedule next timeout + hal_toggle_leds(0x2); +} + +int +main(void) +{ + u2_init(); + + putstr("blink_leds2\n"); + pic_register_handler(IRQ_ONETIME, timer_handler); + hal_set_timeout(DELTA_T); // schedule next timeout + + while(1){ + hal_toggle_leds(0x1); + } + + return 0; +} diff --git a/firmware/microblaze/apps/cruft/buf_ram_test.c b/firmware/microblaze/apps/cruft/buf_ram_test.c new file mode 100644 index 000000000..1aca2aec5 --- /dev/null +++ b/firmware/microblaze/apps/cruft/buf_ram_test.c @@ -0,0 +1,89 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "u2_init.h" +#include "memory_map.h" +#include +#include "nonstdio.h" +#include "hal_io.h" +#include "mdelay.h" + + +static void +write_bufs(void) +{ + int i, n; + int counter = 0; + + for (n = 0; n < NBUFFERS; n++){ + volatile int *p = buffer_ram(n); + for (i = 0; i < BP_NLINES; i++) + p[i] = counter++; + } +} + +// return number of errors detected +static int +check_bufs(void) +{ + int i, n; + int counter = 0; + int nerrors = 0; + + for (n = 0; n < NBUFFERS; n++){ + volatile int *p = buffer_ram(n); + for (i = 0; i < BP_NLINES; i++, counter++){ + int rd = p[i]; + if (rd != counter){ + putchar('b'); + putchar(n + '0'); + putchar('['); + puthex16(i); + putstr("] exp: "); + puthex32(counter); + putstr(" got: "); + puthex32_nl(rd); + nerrors++; + } + } + } + return nerrors; +} + + +int +main(void) +{ + u2_init(); + + output_regs->leds = 0; + + write_bufs(); + int nerrors = check_bufs(); + + if (nerrors == 0){ + output_regs->leds = 0x3; // leds on -> PASS + putstr("PASS\n"); + } + else { + output_regs->leds = 0x0; // leds off -> FAIL + putstr("FAIL\n"); + } + + hal_finish(); + return 0; +} diff --git a/firmware/microblaze/apps/cruft/burn_dbsrx_eeprom.c b/firmware/microblaze/apps/cruft/burn_dbsrx_eeprom.c new file mode 100644 index 000000000..116d4d8d0 --- /dev/null +++ b/firmware/microblaze/apps/cruft/burn_dbsrx_eeprom.c @@ -0,0 +1,106 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "i2c.h" +#include "usrp2_i2c_addr.h" +#include "mdelay.h" +#include "hal_io.h" +#include "nonstdio.h" +#include + + + +int read_dboard_eeprom(int i2c_addr); + + +#define USRP_DBID_DBS_RX 0x0002 +#define USRP_DBID_DBS_RX_WITH_CLOCK_MOD 0x000d + +const char dbs_rx_rev2_eeprom[] = { + 0xdb, 0x0d, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18 +}; + +#define LED_VALS (LED_A | LED_B | LED_C | LED_D) +#define LED_MASK (LED_A | LED_B | LED_C | LED_D) + +int +main(void) +{ + u2_init(); + + puts("\nburn_dbsrx_eeprom\n"); + + hal_set_leds(0, ~0); // all off + + int i2c_addr = I2C_ADDR_RX_A; + int dbid = read_dboard_eeprom(i2c_addr); + bool ok; + const char *msg = 0; + + switch (dbid){ + case -1: + msg = "No RX daughterboard found"; + goto bad; + + case -2: + msg = "Invalid RX EEPROM contents"; + goto bad; + + case USRP_DBID_DBS_RX_WITH_CLOCK_MOD: + msg = "RX Daughterboard already reports being a DBS RX w/ CLOCK_MOD"; + goto good; + + case USRP_DBID_DBS_RX: + // Says it's a DBS_RX, attempt to burn the EEPROM + ok = eeprom_write(i2c_addr, 0, + dbs_rx_rev2_eeprom, sizeof(dbs_rx_rev2_eeprom)); + if (ok){ + msg = "Successfully programmed db as DBS RX Rev 2.1"; + goto good; + } + else { + msg = "Failed to write daugherboard eeprom"; + goto bad; + } + + default: + msg = "Daughterboard is not a DBS RX; ignored"; + goto bad; + } + + good: + puts(msg); + hal_set_leds(LED_VALS, LED_MASK); + while (1) + ; + + bad: + puts(msg); + while(1){ + hal_toggle_leds(LED_VALS); + mdelay(50); + } +} diff --git a/firmware/microblaze/apps/cruft/burnrev30.c b/firmware/microblaze/apps/cruft/burnrev30.c new file mode 100644 index 000000000..40fa53e34 --- /dev/null +++ b/firmware/microblaze/apps/cruft/burnrev30.c @@ -0,0 +1,162 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include +#include +#include +#include +#include +#include +#include "sd.h" +#include "mdelay.h" + +#define HW_REV_MAJOR 3 +#define HW_REV_MINOR 0 + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int test_sd() +{ + int i = sd_init(); + if(i==0) { + puts("FAILED INIT of Card\n"); + return 0; + } + + unsigned char buf[512]; + i = sd_read_block(2048,buf); + if(i == 0) { + puts("READ Command Rejected\n"); + return 0; + } + if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) + ; + else { + puts("Read bad data from SD Card\n"); + return 0; + } + return 1; +} + +int +main(void) +{ + u2_init(); + + putstr("\nFactory Test, Board Rev 3.0\n"); + + bool ok = true; + unsigned char maj = HW_REV_MAJOR; + unsigned char min = HW_REV_MINOR; + ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); + ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); + + putstr("\nset_hw_rev\n"); + if (ok) + printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + else { + printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + hal_finish(); + return 0; + } + + if(test_sd()) + puts("SD OK\n"); + else { + puts("SD FAIL\n"); + //hal_finish(); + //return 0; + } + if(test_ram()) + puts("RAM OK\n"); + else { + puts("RAM FAIL\n"); + hal_finish(); + return 0; + } + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + clocks_mimo_config(MC_WE_LOCK_TO_SMA); + + while (!clocks_lock_detect()) { + puts("No Lock"); + mdelay(1000); + } + puts("Clock Locked\n"); + +} diff --git a/firmware/microblaze/apps/cruft/burnrev31.c b/firmware/microblaze/apps/cruft/burnrev31.c new file mode 100644 index 000000000..f6b08d187 --- /dev/null +++ b/firmware/microblaze/apps/cruft/burnrev31.c @@ -0,0 +1,162 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include +#include +#include +#include +#include +#include +#include "sd.h" +#include "mdelay.h" + +#define HW_REV_MAJOR 3 +#define HW_REV_MINOR 1 + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int test_sd() +{ + int i = sd_init(); + if(i==0) { + puts("FAILED INIT of Card\n"); + return 0; + } + + unsigned char buf[512]; + i = sd_read_block(2048,buf); + if(i == 0) { + puts("READ Command Rejected\n"); + return 0; + } + if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) + ; + else { + puts("Read bad data from SD Card\n"); + return 0; + } + return 1; +} + +int +main(void) +{ + u2_init(); + + putstr("\nFactory Test, Board Rev 3.1\n"); + + bool ok = true; + unsigned char maj = HW_REV_MAJOR; + unsigned char min = HW_REV_MINOR; + ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); + ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); + + putstr("\nset_hw_rev\n"); + if (ok) + printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + else { + printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + hal_finish(); + return 0; + } + + if(test_sd()) + puts("SD OK\n"); + else { + puts("SD FAIL\n"); + //hal_finish(); + //return 0; + } + if(test_ram()) + puts("RAM OK\n"); + else { + puts("RAM FAIL\n"); + hal_finish(); + return 0; + } + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + clocks_mimo_config(MC_WE_LOCK_TO_SMA); + + while (!clocks_lock_detect()) { + puts("No Lock"); + mdelay(1000); + } + puts("Clock Locked\n"); + +} diff --git a/firmware/microblaze/apps/cruft/can_i_sub.c b/firmware/microblaze/apps/cruft/can_i_sub.c new file mode 100644 index 000000000..ed49791f0 --- /dev/null +++ b/firmware/microblaze/apps/cruft/can_i_sub.c @@ -0,0 +1,25 @@ +#include +#include + +//typedef long long int64_t; + + +int64_t sub(int64_t a, int64_t b); +void print(int64_t d); + +int main(void) +{ + u2_init(); + + int64_t d = sub(462550990848000LL, 462028800000000LL); + print_uint64(d); + newline(); + return 0; +} + +int64_t sub(int64_t a, int64_t b) +{ + return a - b; +} + + diff --git a/firmware/microblaze/apps/cruft/double_buffer_fragment.c b/firmware/microblaze/apps/cruft/double_buffer_fragment.c new file mode 100644 index 000000000..cfc061247 --- /dev/null +++ b/firmware/microblaze/apps/cruft/double_buffer_fragment.c @@ -0,0 +1,138 @@ +#if 0 +void +double_buffering(int port) { + unsigned int localstatus = buffer_pool_status->status; + + if(localstatus & BPS_DONE_0) { + bp_clear_buf(0); + if(buffer_state[0] == FILLING) { + buffer_state[0] = FULL; + if(buffer_state[1] == EMPTY) { + bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[1] = FILLING; + } + else + dsp_rx_idle = 1; + if(serdes_tx_idle) { + serdes_tx_idle = 0; + bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 + buffer_state[0] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[0] = EMPTY; + if(dsp_rx_idle) { + dsp_rx_idle = 0; + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines + buffer_state[0] = FILLING; + } + if(buffer_state[1] == FULL) { + bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 + buffer_state[1] = EMPTYING; + } + else + serdes_tx_idle = 1; + } + putstr("Int Proc'ed 0\n"); + } + + if(localstatus & BPS_DONE_1) { + bp_clear_buf(1); + if(buffer_state[1] == FILLING) { + buffer_state[1] = FULL; + if(buffer_state[0] == EMPTY) { + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[0] = FILLING; + } + else + dsp_rx_idle = 1; + if(serdes_tx_idle) { + serdes_tx_idle = 0; + bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 + buffer_state[1] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[1] = EMPTY; + if(dsp_rx_idle) { + dsp_rx_idle = 0; + bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[1] = FILLING; + } + if(buffer_state[0] == FULL) { + bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 + buffer_state[0] = EMPTYING; + } + else + serdes_tx_idle = 1; + } + putstr("Int Proc'ed 1\n"); + } + + if(localstatus & BPS_DONE_2) { + bp_clear_buf(2); + if(buffer_state[2] == FILLING) { + buffer_state[2] = FULL; + if(buffer_state[3] == EMPTY) { + bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3, use 500 lines + buffer_state[3] = FILLING; + } + else + serdes_rx_idle = 1; + if(dsp_tx_idle) { + dsp_tx_idle = 0; + bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 + buffer_state[2] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[2] = EMPTY; + if(serdes_rx_idle) { + serdes_rx_idle = 0; + bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2 + buffer_state[2] = FILLING; + } + if(buffer_state[3] == FULL) { + bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 + buffer_state[3] = EMPTYING; + } + else + dsp_tx_idle = 1; + } + putstr("Int Proc'ed 2\n"); + } + + if(localstatus & BPS_DONE_3) { + bp_clear_buf(3); + if(buffer_state[3] == FILLING) { + buffer_state[3] = FULL; + if(buffer_state[2] == EMPTY) { + bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2, use 500 lines + buffer_state[2] = FILLING; + } + else + serdes_rx_idle = 1; + if(dsp_tx_idle) { + dsp_tx_idle = 0; + bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 + buffer_state[3] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[3] = EMPTY; + if(serdes_rx_idle) { + serdes_rx_idle = 0; + bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3 + buffer_state[3] = FILLING; + } + if(buffer_state[2] == FULL) { + bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 + buffer_state[2] = EMPTYING; + } + else + dsp_tx_idle = 1; + } + putstr("Int Proc'ed 3\n"); + } +} +#endif diff --git a/firmware/microblaze/apps/cruft/echo.c b/firmware/microblaze/apps/cruft/echo.c new file mode 100644 index 000000000..89108ee80 --- /dev/null +++ b/firmware/microblaze/apps/cruft/echo.c @@ -0,0 +1,34 @@ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "u2_init.h" +#include "stdio.h" + +int +main(void) +{ + u2_init(); + + puts("\n>>> echo <<<"); + + while (1){ + int ch = getchar(); + putchar(ch); + } + + return 0; +} diff --git a/firmware/microblaze/apps/cruft/eth_serdes.c b/firmware/microblaze/apps/cruft/eth_serdes.c new file mode 100644 index 000000000..2d2ddc1ca --- /dev/null +++ b/firmware/microblaze/apps/cruft/eth_serdes.c @@ -0,0 +1,233 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_passthru_v2.h" +#include "memcpy_wa.h" +#include "clocks.h" +#include +#include +#include + + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno __attribute__((unused)); // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between ethernet and serdes + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // serdes -> eth (double buffer) +#define DSP_RX_BUF_1 3 // serdes -> eth +#define DSP_TX_BUF_0 4 // eth -> serdes (double buffer) +#define DSP_TX_BUF_1 5 // eth -> serdes + +/* + * ================================================================ + * configure serdes double buffering state machine (eth -> serdes) + * ================================================================ + */ + + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to serdes +buf_cmd_args_t dsp_tx_send_args = { + PORT_SERDES, + 0, + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ==================================================================== + * configure serdes RX double buffering state machine (serdes -> eth) + * ==================================================================== + */ + +// receive from serdes +buf_cmd_args_t dsp_rx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// ---------------------------------------------------------------- + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ + +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ +#if 0 + uint32_t *p = buffer_ram(buf_this); + uint32_t last_line = buffer_pool_status->last_line[buf_this] - sm->last_line_adj; + printf("fw_sets_seqno_inspector: buf_this = %d, last_line = %d\n", + buf_this, last_line); + + print_buffer(p, (last_line + 1)); +#endif + +#if 0 + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; +#endif + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (0 && (status & ~BPS_IDLE_ALL)){ + putstr("status = "); + puthex32_nl(status); + } + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int +main(void) +{ + u2_init(); + + output_regs->led_src = 0x3; // h/w controls bottom two bits + clocks_enable_test_clk(true, 1); + + putstr("\neth <-> serdes\n"); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + // clocks_mimo_config(MC_WE_LOCK_TO_SMA | MC_PROVIDE_CLK_TO_MIMO); + clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + +#if 1 + output_regs->debug_mux_ctrl = 1; + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> serdes + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + // initialize double buffering state machine for serdes -> ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // kick off the state machines + dbsm_start(&dsp_tx_sm); + dbsm_start(&dsp_rx_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + } +} diff --git a/firmware/microblaze/apps/cruft/factory_test.c b/firmware/microblaze/apps/cruft/factory_test.c new file mode 100644 index 000000000..e1fbb0e40 --- /dev/null +++ b/firmware/microblaze/apps/cruft/factory_test.c @@ -0,0 +1,438 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include +#include +#include +#include +#include +#include +#include "sd.h" + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between ethernet and DSP pipelines + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + +/* + * ================================================================ + * configure DSP TX double buffering state machine (eth -> dsp) + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ================================================================ + * configure DSP RX double buffering state machine (dsp -> eth) + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +} + + +void +stop_rx_cmd(void) +{ + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + // setup some defaults + + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = interp; +} + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int test_sd() +{ + int i = sd_init(); + if(i==0) { + puts("FAILED INIT of Card\n"); + return 0; + } + + unsigned char buf[512]; + i = sd_read_block(2048,buf); + if(i == 0) { + puts("READ Command Rejected\n"); + return 0; + } + if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) + ; + else { + puts("Read bad data from SD Card\n"); + return 0; + } + return 1; +} + +int +main(void) +{ + u2_init(); + + putstr("\nFactory Test\n"); + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + if(test_sd()) + puts("SD OK\n"); + else { + puts("SD FAIL\n"); + // hal_finish(); + //return 0; + } + if(test_ram()) + puts("RAM OK\n"); + else { + puts("RAM FAIL\n"); + hal_finish(); + return 0; + } + + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + output_regs->led_src = 0x7; // make bottom 3 controlled by HW + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + clocks_enable_tx_dboard(true,1); + clocks_mimo_config(MC_WE_LOCK_TO_SMA); +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + + output_regs->debug_mux_ctrl = 1; +#if 0 + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // program tx registers + setup_tx(); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} diff --git a/firmware/microblaze/apps/cruft/gen_eth_packets.c b/firmware/microblaze/apps/cruft/gen_eth_packets.c new file mode 100644 index 000000000..4d521f6bf --- /dev/null +++ b/firmware/microblaze/apps/cruft/gen_eth_packets.c @@ -0,0 +1,187 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "memcpy_wa.h" +#include "print_rmon_regs.h" +#include +#include +#include + + +// ---------------------------------------------------------------- + +static eth_mac_addr_t dst_mac_addr = + {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; + +// ---------------------------------------------------------------- + +// #define PACKET_SIZE 1500 // bytes +// #define ETH_DATA_RATE 1000000 // 1MB/s +// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s + +// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts + +static int timer_delta = (int)(MASTER_CLK_RATE * 1e-3); // tick at 1 kHz +static int sim_timer_delta = (int)(MASTER_CLK_RATE * 100e-6); // tick at 10 kHz + +static volatile bool send_packet_now = false; // timer handler sets this +static volatile bool link_is_up = false; // eth handler sets this + +int packet_number = 0; + + +#define CPU_TX_BUF 0 // cpu xmits ethernet frames from here +#define CPU_RX_BUF 1 // receive ethernet frames here + +// ---------------------------------------------------------------- + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + link_is_up = speed == 0 ? false : true; + hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); + printf("\neth link changed: speed = %d\n", speed); +} + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = 1; +} + + +static void +init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) +{ + int i = 0; + int mark = ((bufnum & 0xff) << 24) | 0x005A0000; + + for (i = 0; i < BP_NLINES; i++){ + buf[i] = mark | i; + mark ^= 0x00FF0000; + } + + // copy header into buffer + memcpy_wa(buf, pkt, sizeof(*pkt)); +} + +static void +init_packets(void) +{ + u2_eth_packet_t pkt __attribute__((aligned (4))); + + memset(&pkt, 0, sizeof(pkt)); + + pkt.ehdr.dst = dst_mac_addr; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + pkt.fixed.word0 = 0x01234567; + pkt.fixed.timestamp = 0xffffffff; + + // init just the one we're using + init_packet((void *)buffer_ram(CPU_TX_BUF), &pkt, CPU_TX_BUF); +} + +int +main(void) +{ + int npackets_sent = 0; + + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\ngen_eth_packets\n"); + + hal_set_leds(0x0, 0x3); + + init_packets(); + + pic_register_handler(IRQ_TIMER, timer_irq_handler); + + if (hwconfig_simulation_p()) + timer_delta = sim_timer_delta; + + hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + /* + if (hwconfig_simulation_p()){ + eth_mac->speed = 4; // hardcode mac speed to 1000 + link_is_up = true; + } + */ + + // fire off a receive from the ethernet + bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); + + while(1){ + uint32_t status = buffer_pool_status->status; + + if (status & (BPS_DONE(CPU_RX_BUF) | BPS_ERROR(CPU_RX_BUF))){ + bp_clear_buf(CPU_RX_BUF); + // ignore incoming ethernet packets; they were looped back in sim + bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); + } + + if (status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))){ + if (status & BPS_ERROR(CPU_TX_BUF)){ + putchar('E'); + } + bp_clear_buf(CPU_TX_BUF); + npackets_sent++; + if ((npackets_sent & 0xF) == 0){ // print after every 16 packets + //print_rmon_regs(); + putchar('.'); + } + } + + if (link_is_up && send_packet_now && (status & BPS_IDLE(CPU_TX_BUF))){ + send_packet_now = false; + + // kick off the next packet + // FIXME set packet number in packet + + bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, 255); // 1KB total + hal_toggle_leds(0x1); + } + } + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/cruft/gen_pause_frames.c b/firmware/microblaze/apps/cruft/gen_pause_frames.c new file mode 100644 index 000000000..0f81dafff --- /dev/null +++ b/firmware/microblaze/apps/cruft/gen_pause_frames.c @@ -0,0 +1,207 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "u2_eth_packet.h" +#include "memcpy_wa.h" +#include +#include + + +// ---------------------------------------------------------------- + +unsigned char dst_mac_addr[6] = { + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff +}; + +// ---------------------------------------------------------------- + +// #define PACKET_SIZE 1500 // bytes +// #define ETH_DATA_RATE 1000000 // 1MB/s +// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s + +// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts + +static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz + +static volatile bool send_packet_now = false; // timer handler sets this +static volatile bool link_is_up = false; // eth handler sets this + +int packet_number = 0; + +// ---------------------------------------------------------------- + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + link_is_up = true; + break; + + case 100: + v = LS_100; + link_is_up = true; + break; + + case 1000: + v = LS_100; + link_is_up = true; + break; + + default: + v = 0; + link_is_up = false; + break; + } + + hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + putstr("\neth link changed: speed = "); + puthex16_nl(speed); +} + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = 1; +} + + +void +buffer_irq_handler(unsigned irq) +{ + // FIXME +} + +static void +init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) +{ + int i = 0; + int mark = ((bufnum & 0xff) << 24) | 0x005A0000; + + for (i = 0; i < BP_NLINES; i++){ + buf[i] = mark | i; + mark ^= 0x00FF0000; + } + + // copy header into buffer + memcpy_wa(buf, pkt, sizeof(*pkt)); +} + +static void +init_packets(void) +{ + int i; + + u2_eth_packet_t pkt __attribute__((aligned (4))); + + for (i = 0; i < 6; i++){ + pkt.ehdr.dst.addr[i] = dst_mac_addr[i]; + } + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + + // fill ALL buffers for debugging + for (i = 0; i < 8; i++) + init_packet((void *)buffer_ram(i), &pkt, i); +} + +static int led_counter = 0; + +int +main(void) +{ + int send_pause = 1; + + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\ngen_eth_packets\n"); + + // Control LEDs + output_regs->leds = 0x00; + + init_packets(); + + // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now + pic_register_handler(IRQ_TIMER, timer_irq_handler); + hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + eth_mac->pause_frame_send_en = 1; + eth_mac->pause_quanta_set = 16384 / 512; + + // eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 + + while(1){ + if (link_is_up && send_packet_now){ + send_packet_now = false; + + + if (send_pause) + eth_mac->xon_cpu = 1; + else + eth_mac->xon_cpu = 0; + + send_pause ^= 1; + + // kick off the next packet + // FIXME set packet number in packet + +#if 0 + bp_send_from_buf(0, PORT_ETH, 1, 0, 255); // 1KB total + + while ((buffer_pool_status->status & (BPS_DONE_0|BPS_ERROR_0)) == 0) + ; + bp_clear_buf(0); +#endif + + output_regs->leds = ((++led_counter) & 0x1) | (link_is_up ? 0x2 : 0x0); + } + } + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/cruft/hello.c b/firmware/microblaze/apps/cruft/hello.c new file mode 100644 index 000000000..bce843093 --- /dev/null +++ b/firmware/microblaze/apps/cruft/hello.c @@ -0,0 +1,30 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "u2_init.h" +#include "stdio.h" + +int +main(void) +{ + u2_init(); + + puts("Hello World"); + puts("Goodbye World"); + + return 0; +} diff --git a/firmware/microblaze/apps/cruft/ibs_rx_test.c b/firmware/microblaze/apps/cruft/ibs_rx_test.c new file mode 100644 index 000000000..bdc04747e --- /dev/null +++ b/firmware/microblaze/apps/cruft/ibs_rx_test.c @@ -0,0 +1,82 @@ +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "nonstdio.h" + +#define PORT 2 // ethernet = 2, serdes = 0 +int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; +int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; + +int buffer_state[4]; + +static void __attribute__((unused)) +wait_until_status_nonzero(void) +{ + while (buffer_pool_status->status == 0) + ; +} + +int +main(void) +{ + int i; + + u2_init(); + + output_regs->adc_ctrl = 0x0A; + + dsp_rx_regs->freq = 0; + dsp_rx_regs->scale_iq = (1 << 16) | 1; + dsp_rx_regs->decim_rate = 8; + + volatile unsigned int *buffer0 = buffer_ram(0); + volatile unsigned int *buffer1 = buffer_ram(1); + volatile unsigned int *buffer2 = buffer_ram(2); + + putstr("Starting RX\n"); + bp_clear_buf(0); + bp_receive_to_buf(0, 1, 1, 0, 99); + + dsp_rx_regs->rx_command = (50 << 9) | 100; // Numlines, lines per frame + dsp_rx_regs->rx_time = 0x2000; + + dsp_rx_regs->rx_command = (137 << 9) | 50; // Numlines, lines per frame + dsp_rx_regs->rx_time = 0x2200; + + while (buffer_pool_status->status == 0) + ; + bp_clear_buf(0); + bp_clear_buf(1); + bp_receive_to_buf(1, 1, 1, 0, 99); + while (buffer_pool_status->status == 0) + ; + bp_clear_buf(2); + bp_receive_to_buf(2, 1, 1, 0, 99); + while (buffer_pool_status->status == 0) + ; + + for(i=0;i<100;i++) { + puthex(i); + putstr(" "); + puthex_nl(buffer0[i]); + } + for(i=0;i<60;i++) { + puthex(i); + putstr(" "); + puthex_nl(buffer1[i]); + } + for(i=0;i<60;i++) { + puthex(i); + putstr(" "); + puthex_nl(buffer2[i]); + } + //while(timer_regs -> time < 0x6000) + // {} + + putstr("Done\n"); + hal_finish(); + + return 1; +} diff --git a/firmware/microblaze/apps/cruft/ibs_tx_test.c b/firmware/microblaze/apps/cruft/ibs_tx_test.c new file mode 100644 index 000000000..ff9446d92 --- /dev/null +++ b/firmware/microblaze/apps/cruft/ibs_tx_test.c @@ -0,0 +1,160 @@ +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "nonstdio.h" + +// Globals +#define EMPTY 0 +#define FILLING 1 +#define FULL 2 +#define EMPTYING 3 + +#define PORT 2 // ethernet = 2, serdes = 0 +int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; +int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; + +int buffer_state[4]; + +static void +wait_until_status_nonzero(void) +{ + while (buffer_pool_status->status == 0) + ; +} + +int +main(void) +{ + int i; + + u2_init(); + + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (1 << 16) | 1; + dsp_tx_regs->interp_rate = 8; + + // Write data to be sent into the first buffer + volatile unsigned int *buffer0 = buffer_ram(0); + volatile unsigned int *buffer1 = buffer_ram(1); + + + putstr("Starting to fill in RAM\n"); + for(i=0;i<512;i++) + buffer0[i] = i; + putstr("Filled in RAM\n"); + + buffer0[0] = 7; // start and end of buffer, send immediately + buffer0[1] = 0x0000; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + while(timer_regs -> time < 0x6000) + {} + + buffer0[0] = 3; // start and end of buffer + buffer0[1] = 0x8000; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + while(timer_regs -> time < 0x8400) + {} + + buffer0[0] = 3; // start and end of buffer + buffer0[1] = 0x8800; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + while(timer_regs -> time < 0x9000) + {} + + buffer0[0] = 0x2; // not last + buffer0[1] = 0x9100; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + buffer0[0] = 0x1; // last + buffer0[1] = 0x0000; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + + + buffer0[0] = 0x3; // first and last + buffer0[1] = 0x8000; // Time in the past + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + + /* + buffer0[0] = 0x2; // not last + buffer0[1] = 0x9600; // start time + bp_clear_buf(0); + bp_send_from_buf(0, 1, 1, 0, 9); + while (buffer_pool_status->status == 0) + ; + */ + + while(timer_regs -> time < 0xa000) + {} + + putstr("Done\n"); + + while(1) + {} + hal_finish(); + + // Send a bunch, let them pile up in FIFO + bp_send_from_buf(0, 2, 1, 21, 80); wait_until_status_nonzero(); + bp_clear_buf(0); + putstr("First add'l TX done\n"); + bp_send_from_buf(0, 2, 1, 81, 288); wait_until_status_nonzero(); + bp_clear_buf(0); + bp_send_from_buf(0, 2, 1, 289, 292); wait_until_status_nonzero(); + bp_clear_buf(0); + bp_send_from_buf(0, 2, 1, 293, 326); wait_until_status_nonzero(); + bp_clear_buf(0); + bp_send_from_buf(0, 2, 1, 327, 399); wait_until_status_nonzero(); + bp_clear_buf(0); + bp_send_from_buf(0, 2, 1, 400, 511); wait_until_status_nonzero(); + bp_clear_buf(0); + putstr("All add'l TX done\n"); + + bp_receive_to_buf(1, 2, 1, 21, 80); wait_until_status_nonzero(); + bp_clear_buf(1); + putstr("First add'l RX done\n"); + bp_receive_to_buf(1, 2, 1, 81, 288); wait_until_status_nonzero(); + bp_clear_buf(1); + bp_receive_to_buf(1, 2, 1, 289, 292); wait_until_status_nonzero(); + bp_clear_buf(1); + bp_receive_to_buf(1, 2, 1, 293, 326); wait_until_status_nonzero(); + bp_clear_buf(1); + bp_receive_to_buf(1, 2, 1, 327, 399); wait_until_status_nonzero(); + bp_clear_buf(1); + bp_receive_to_buf(1, 2, 1, 400, 511); wait_until_status_nonzero(); + bp_clear_buf(1); + putstr("All add'l RX done\n"); + + for(i=0;i<512;i++) + if(buffer0[i] != buffer1[i]) { + putstr("ERROR at location: "); + puthex_nl(i); + putstr("Value sent: "); + puthex_nl(buffer0[i]); + putstr("Value rcvd: "); + puthex_nl(buffer1[i]); + //break; + } + + putstr("Done Testing\n"); + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/cruft/mimo_app_common_v2.c b/firmware/microblaze/apps/cruft/mimo_app_common_v2.c new file mode 100644 index 000000000..5dbecb0d0 --- /dev/null +++ b/firmware/microblaze/apps/cruft/mimo_app_common_v2.c @@ -0,0 +1,582 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "mimo_app_common_v2.h" +#include "buffer_pool.h" +#include "memcpy_wa.h" +#include "ethernet.h" +#include "nonstdio.h" +#include "print_rmon_regs.h" +#include "db.h" +#include "db_base.h" +#include "clocks.h" +#include "u2_init.h" +#include + +volatile bool link_is_up = false; // eth handler sets this +int cpu_tx_buf_dest_port = PORT_ETH; + +// If this is non-zero, this dbsm could be writing to the ethernet +dbsm_t *ac_could_be_sending_to_eth; + +static unsigned char exp_seqno __attribute__((unused)) = 0; + +void abort(void); + +static bool +burn_mac_addr(const op_burn_mac_addr_t *p) +{ + return ethernet_set_mac_addr(&p->addr); +} + +static bool +sync_to_pps(const op_generic_t *p) +{ + timesync_regs->sync_on_next_pps = 1; + putstr("SYNC to PPS\n"); + return true; +} + +static bool +config_mimo_cmd(const op_config_mimo_t *p) +{ + clocks_mimo_config(p->flags); + return true; +} + +void +set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt) +{ + reply_pkt->ehdr.dst = cmd_pkt->ehdr.src; + reply_pkt->ehdr.src = *ethernet_mac_addr(); + reply_pkt->ehdr.ethertype = U2_ETHERTYPE; + reply_pkt->thdr.flags = 0; + reply_pkt->thdr.fifo_status = 0; // written by protocol engine + reply_pkt->thdr.seqno = 0; // written by protocol engine + reply_pkt->thdr.ack = 0; // written by protocol engine + u2p_set_word0(&reply_pkt->fixed, 0, CONTROL_CHAN); + reply_pkt->fixed.timestamp = timer_regs->time; +} + +static void +send_reply(unsigned char *reply, size_t reply_len) +{ + if (reply_len < 64) + reply_len = 64; + + // wait for buffer to become idle + hal_set_leds(0x4, 0x4); + while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) + ; + hal_set_leds(0x0, 0x4); + + // copy reply into CPU_TX_BUF + memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); + + // wait until nobody else is sending to the ethernet + if (ac_could_be_sending_to_eth){ + hal_set_leds(0x8, 0x8); + dbsm_wait_for_opening(ac_could_be_sending_to_eth); + hal_set_leds(0x0, 0x8); + } + + if (0){ + printf("sending_reply to port %d, len = %d\n", cpu_tx_buf_dest_port, (int)reply_len); + print_buffer(buffer_ram(CPU_TX_BUF), reply_len/4); + } + + // fire it off + bp_send_from_buf(CPU_TX_BUF, cpu_tx_buf_dest_port, 1, 0, reply_len/4); + + // wait for it to complete (not long, it's a small pkt) + while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) + ; + + bp_clear_buf(CPU_TX_BUF); +} + + +static size_t +op_id_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_id_reply_t *r = (op_id_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) // no room + return 0; + + // Build reply subpacket + + r->opcode = OP_ID_REPLY; + r->len = sizeof(op_id_reply_t); + r->rid = p->rid; + r->addr = *ethernet_mac_addr(); + r->hw_rev = (u2_hw_rev_major << 8) | u2_hw_rev_minor; + // r->fpga_md5sum = ; // FIXME + // r->sw_md5sum = ; // FIXME + + return r->len; +} + + +static size_t +config_tx_v2_cmd(const op_config_tx_v2_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_config_tx_reply_v2_t *r = (op_config_tx_reply_v2_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + struct tune_result tune_result; + memset(&tune_result, 0, sizeof(tune_result)); + + bool ok = true; + +#if 0 + if (p->valid & CFGV_GAIN){ + ok &= db_set_gain(tx_dboard, p->gain); + } + + if (p->valid & CFGV_FREQ){ + bool was_streaming = is_streaming(); + if (was_streaming) + stop_rx_cmd(); + + u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); + bool tune_ok = db_tune(tx_dboard, f, &tune_result); + ok &= tune_ok; + print_tune_result("Tx", tune_ok, f, &tune_result); + + if (was_streaming) + restart_streaming(); + } + + if (p->valid & CFGV_INTERP_DECIM){ + int interp = p->interp; + int hb1 = 0; + int hb2 = 0; + + if (!(interp & 1)){ + hb2 = 1; + interp = interp >> 1; + } + + if (!(interp & 1)){ + hb1 = 1; + interp = interp >> 1; + } + + if (interp < MIN_CIC_INTERP || interp > MAX_CIC_INTERP) + ok = false; + else { + dsp_tx_regs->interp_rate = (hb1<<9) | (hb2<<8) | interp; + // printf("Interp: %d, register %d\n", p->interp, (hb1<<9) | (hb2<<8) | interp); + } + } + + if (p->valid & CFGV_SCALE_IQ){ + dsp_tx_regs->scale_iq = p->scale_iq; + } +#endif + + // Build reply subpacket + + r->opcode = OP_CONFIG_TX_REPLY_V2; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + r->inverted = tune_result.inverted; + r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); + r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); + r->duc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); + r->duc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); + r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); + r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); + return r->len; +} + +static size_t +config_rx_v2_cmd(const op_config_rx_v2_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_config_rx_reply_v2_t *r = (op_config_rx_reply_v2_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + struct tune_result tune_result; + memset(&tune_result, 0, sizeof(tune_result)); + + bool ok = true; + + if (p->valid & CFGV_GAIN){ + ok &= db_set_gain(rx_dboard, p->gain); + } + + if (p->valid & CFGV_FREQ){ + bool was_streaming = is_streaming(); + if (was_streaming) + stop_rx_cmd(); + + u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); + bool tune_ok = db_tune(rx_dboard, f, &tune_result); + ok &= tune_ok; + print_tune_result("Rx", tune_ok, f, &tune_result); + + if (was_streaming) + restart_streaming(); + } + + if (p->valid & CFGV_INTERP_DECIM){ + int decim = p->decim; + int hb1 = 0; + int hb2 = 0; + + if(!(decim & 1)) { + hb2 = 1; + decim = decim >> 1; + } + + if(!(decim & 1)) { + hb1 = 1; + decim = decim >> 1; + } + + if (decim < MIN_CIC_DECIM || decim > MAX_CIC_DECIM) + ok = false; + else { + dsp_rx_regs->decim_rate = (hb1<<9) | (hb2<<8) | decim; + // printf("Decim: %d, register %d\n", p->decim, (hb1<<9) | (hb2<<8) | decim); + } + } + + if (p->valid & CFGV_SCALE_IQ){ + dsp_rx_regs->scale_iq = p->scale_iq; + } + + // Build reply subpacket + + r->opcode = OP_CONFIG_RX_REPLY_V2; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + r->inverted = tune_result.inverted; + r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); + r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); + r->ddc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); + r->ddc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); + r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); + r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); + + return r->len; +} + +static size_t +read_time_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_read_time_reply_t *r = (op_read_time_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_READ_TIME_REPLY; + r->len = sizeof(*r); + r->rid = p->rid; + r->time = timer_regs->time; + + return r->len; +} + +static void +fill_db_info(u2_db_info_t *p, const struct db_base *db) +{ + p->dbid = db->dbid; + p->freq_min_hi = u2_fxpt_freq_hi(db->freq_min); + p->freq_min_lo = u2_fxpt_freq_lo(db->freq_min); + p->freq_max_hi = u2_fxpt_freq_hi(db->freq_max); + p->freq_max_lo = u2_fxpt_freq_lo(db->freq_max); + p->gain_min = db->gain_min; + p->gain_max = db->gain_max; + p->gain_step_size = db->gain_step_size; +} + +static size_t +dboard_info_cmd(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_dboard_info_reply_t *r = (op_dboard_info_reply_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_DBOARD_INFO_REPLY; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = true; + + fill_db_info(&r->tx_db_info, tx_dboard); + fill_db_info(&r->rx_db_info, rx_dboard); + + return r->len; +} + +static size_t +peek_cmd(const op_peek_t *p, + void *reply_payload, size_t reply_payload_space) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + + putstr("peek: addr="); puthex32(p->addr); + printf(" bytes=%u\n", p->bytes); + + if ((reply_payload_space < (sizeof(*r) + p->bytes)) || + p->bytes > MAX_SUBPKT_LEN - sizeof(op_generic_t)) { + putstr("peek: insufficient reply packet space\n"); + return 0; // FIXME do partial read? + } + + r->opcode = OP_PEEK_REPLY; + r->len = sizeof(*r)+p->bytes; + r->rid = p->rid; + r->ok = true; + + memcpy_wa(reply_payload+sizeof(*r), (void *)p->addr, p->bytes); + + return r->len; +} + +static bool +poke_cmd(const op_poke_t *p) +{ + int bytes = p->len - sizeof(*p); + putstr("poke: addr="); puthex32(p->addr); + printf(" bytes=%u\n", bytes); + + uint8_t *src = (uint8_t *)p + sizeof(*p); + memcpy_wa((void *)p->addr, src, bytes); + + return true; +} + +static size_t +generic_reply(const op_generic_t *p, + void *reply_payload, size_t reply_payload_space, + bool ok) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = p->opcode | OP_REPLY_BIT; + r->len = sizeof(*r); + r->rid = p->rid; + r->ok = ok; + + return r->len; +} + +static size_t +add_eop(void *reply_payload, size_t reply_payload_space) +{ + op_generic_t *r = (op_generic_t *) reply_payload; + if (reply_payload_space < sizeof(*r)) + return 0; // no room + + r->opcode = OP_EOP; + r->len = sizeof(*r); + r->rid = 0; + r->ok = 0; + + return r->len; +} + +void +handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len) +{ + unsigned char reply[sizeof(u2_eth_packet_t) + 4 * sizeof(u2_subpkt_t)] _AL4; + unsigned char *reply_payload = &reply[sizeof(u2_eth_packet_t)]; + int reply_payload_space = sizeof(reply) - sizeof(u2_eth_packet_t); + + // initialize reply + memset(reply, 0, sizeof(reply)); + set_reply_hdr((u2_eth_packet_t *) reply, pkt); + + // point to beginning of payload (subpackets) + unsigned char *payload = ((unsigned char *) pkt) + sizeof(u2_eth_packet_t); + int payload_len = len - sizeof(u2_eth_packet_t); + + size_t subpktlen = 0; + + while (payload_len >= sizeof(op_generic_t)){ + const op_generic_t *gp = (const op_generic_t *) payload; + subpktlen = 0; + + // printf("\nopcode = %d\n", gp->opcode); + + switch(gp->opcode){ + case OP_EOP: // end of subpackets + goto end_of_subpackets; + + case OP_ID: + subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); + break; + + case OP_CONFIG_TX_V2: + subpktlen = config_tx_v2_cmd((op_config_tx_v2_t *) payload, + reply_payload, reply_payload_space); + break; + + case OP_CONFIG_RX_V2: + subpktlen = config_rx_v2_cmd((op_config_rx_v2_t *) payload, + reply_payload, reply_payload_space); + break; + + case OP_START_RX_STREAMING: + start_rx_streaming_cmd(&pkt->ehdr.src, (op_start_rx_streaming_t *) payload); + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, true); + break; + + case OP_STOP_RX: + stop_rx_cmd(); + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, true); + break; + + case OP_BURN_MAC_ADDR: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, + burn_mac_addr((op_burn_mac_addr_t *) payload)); + break; + + case OP_CONFIG_MIMO: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, + config_mimo_cmd((op_config_mimo_t *) payload)); + break; + + case OP_READ_TIME: + subpktlen = read_time_cmd(gp, reply_payload, reply_payload_space); + break; + + case OP_DBOARD_INFO: + subpktlen = dboard_info_cmd(gp, reply_payload, reply_payload_space); + break; + + case OP_SYNC_TO_PPS: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, + sync_to_pps((op_generic_t *) payload)); + break; + + case OP_PEEK: + subpktlen = peek_cmd((op_peek_t *)payload, reply_payload, reply_payload_space); + break; + + case OP_POKE: + subpktlen = generic_reply(gp, reply_payload, reply_payload_space, + poke_cmd((op_poke_t *)payload)); + break; + + default: + printf("app_common_v2: unhandled opcode = %d\n", gp->opcode); + break; + } + + int t = (gp->len + 3) & ~3; // bump to a multiple of 4 + payload += t; + payload_len -= t; + + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + } + + end_of_subpackets: + + // add the EOP marker + subpktlen = add_eop(reply_payload, reply_payload_space); + subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 + reply_payload += subpktlen; + reply_payload_space -= subpktlen; + + send_reply(reply, reply_payload - reply); +} + + +/* + * Called when an ethernet packet is received. + * Return true if we handled it here, otherwise + * it'll be passed on to the DSP Tx pipe + */ +int +eth_pkt_inspector(bsm12_t *sm, int bufno) +{ + u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); + size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; + + //static size_t last_len = 0; + + // hal_toggle_leds(0x1); + + // inspect rcvd frame and figure out what do do. + + if (pkt->ehdr.ethertype != U2_ETHERTYPE) + return true; // ignore, probably bogus PAUSE frame from MAC + + int chan = u2p_chan(&pkt->fixed); + + switch (chan){ + case CONTROL_CHAN: + handle_control_chan_frame(pkt, byte_len); + return -1; + break; + + case 0: + return 0; // pass it off to DSP TX + + case 1: + return 1; // pass it off to SERDES TX + + default: + abort(); + break; + } +} + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + link_is_up = speed != 0; + hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); + printf("\neth link changed: speed = %d\n", speed); +} + + +void +print_tune_result(char *msg, bool tune_ok, + u2_fxpt_freq_t target_freq, struct tune_result *r) +{ +#if 0 + printf("db_tune %s %s\n", msg, tune_ok ? "true" : "false"); + putstr(" target_freq "); print_fxpt_freq(target_freq); newline(); + putstr(" baseband_freq "); print_fxpt_freq(r->baseband_freq); newline(); + putstr(" dxc_freq "); print_fxpt_freq(r->dxc_freq); newline(); + putstr(" residual_freq "); print_fxpt_freq(r->residual_freq); newline(); + printf(" inverted %s\n", r->inverted ? "true" : "false"); +#endif +} diff --git a/firmware/microblaze/apps/cruft/mimo_app_common_v2.h b/firmware/microblaze/apps/cruft/mimo_app_common_v2.h new file mode 100644 index 000000000..1e62ced37 --- /dev/null +++ b/firmware/microblaze/apps/cruft/mimo_app_common_v2.h @@ -0,0 +1,63 @@ +/* -*- c++ -*- */ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef INCLUDED_APP_COMMON_H +#define INCLUDED_APP_COMMON_H + +#include +#include "usrp2_eth_packet.h" +#include "bsm12.h" +#include "memory_map.h" +#include "hal_io.h" +#include +#include + +#define CPU_TX_BUF 7 // cpu -> eth + +#define _AL4 __attribute__((aligned (4))) + +extern volatile bool link_is_up; // eth handler sets this + +// If there's a dbsm that sends to the ethernet, put it's address here +extern dbsm_t *ac_could_be_sending_to_eth; + +extern int cpu_tx_buf_dest_port; + +void set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt); + +/* + * Called when an ethernet packet is received. + */ +int eth_pkt_inspector(bsm12_t *sm, int bufno); + + +void link_changed_callback(int speed); + +void +print_tune_result(char *msg, bool tune_ok, + u2_fxpt_freq_t target_freq, struct tune_result *r); + + +void start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p); +void stop_rx_cmd(void); +void restart_streaming(void); +bool is_streaming(void); + +void handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len); + +#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/cruft/mimo_tx.c b/firmware/microblaze/apps/cruft/mimo_tx.c new file mode 100644 index 000000000..e0f8aa6fa --- /dev/null +++ b/firmware/microblaze/apps/cruft/mimo_tx.c @@ -0,0 +1,363 @@ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This is a down and dirty test program that confirms that the we can + * coherently transmit different signals to two USRP2s connected via a + * mimo cable. This code runs in the USRP2 connected to the ethernet. + * The other USRP runs mimo_tx_slave. The host runs test_mimo_tx. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "bsm12.h" +#include "mimo_app_common_v2.h" +#include "memcpy_wa.h" +#include +#include +#include +#include "clocks.h" + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Experimental code to transmit packets to DSP Tx and SERDES + * + * Hard wire the Tx config so we don't have to deal with control stuff yet. + */ + +#define BUF_BSM12_0 4 +#define BUF_BSM12_1 5 +#define BUF_BSM12_2 6 + +//#define CPU_TX_BUF 7 // cpu -> eth + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from ethernet +buf_cmd_args_t bsm12_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t bsm12_send0_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +// send to SERDES +buf_cmd_args_t bsm12_send1_args = { + PORT_SERDES, + 0, // starts just past transport header + 0 // filled in from last_line register +}; + +bsm12_t bsm12_sm; // the state machine + +#if 0 +/* + * ================================================================ + * configure DSP RX double buffering state machine (dsp -> eth) + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ETH +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine +#endif + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ +#if 0 + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +#endif +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ +#if 0 + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +#endif +} + + +void +stop_rx_cmd(void) +{ +#if 0 + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +#endif +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + + int tx_scale = 2500; + int interp = 8; // * 4 + + // setup some defaults + + dsp_tx_regs->freq = 429496730; // 10MHz + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; +} + + +#if 0 +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +int +fw_sets_seqno_inspector(bsm12_t *sm, int buf_this) +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + bsm12_process_status(&bsm12_sm, status); +} + +int +main(void) +{ + u2_init(); + + putstr("\nMIMO Tx\n"); + print_mac_addr(ethernet_mac_addr()->addr); + newline(); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + + output_regs->debug_mux_ctrl = 1; +#if 0 + hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + bsm12_init(&bsm12_sm, BUF_BSM12_0, + &bsm12_recv_args, &bsm12_send0_args, &bsm12_send1_args, + eth_pkt_inspector); + + +#if 0 + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; +#endif + + + // program tx registers + setup_tx(); + + // kick off the state machine + bsm12_start(&bsm12_sm); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + // dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + // dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} diff --git a/firmware/microblaze/apps/cruft/mimo_tx_slave.c b/firmware/microblaze/apps/cruft/mimo_tx_slave.c new file mode 100644 index 000000000..cdf9c03c2 --- /dev/null +++ b/firmware/microblaze/apps/cruft/mimo_tx_slave.c @@ -0,0 +1,376 @@ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This is a down and dirty test program that confirms that the we can + * coherently transmit different signals to two USRP2s connected via a + * mimo cable. This code runs in the USRP2 NOT connected to the + * ethernet. The USRP connected to the ethernet runs mimo_tx. The + * host runs test_mimo_tx. + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include "clocks.h" +#include +#include +#include + + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between serdes and DSP pipelines + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow + * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // dsp rx -> serdes (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> serdes +#define DSP_TX_BUF_0 4 // serdes -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // serdes -> dsp tx + +/* + * ================================================================== + * configure DSP TX double buffering state machine (serdes -> dsp) + * ================================================================== + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from serdes +buf_cmd_args_t dsp_tx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ================================================================= + * configure DSP RX double buffering state machine (dsp -> serdes) + * ================================================================= + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to serdes +buf_cmd_args_t dsp_rx_send_args = { + PORT_SERDES, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +} + + +void +stop_rx_cmd(void) +{ + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 2500; + int interp = 8; // * 4 + + // setup some defaults + + dsp_tx_regs->freq = 429496730; // 10MHz + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; +} + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + // hal_toggle_leds(LED_A); + + uint32_t status = buffer_pool_status->status; + + if (0 && (status & ~BPS_IDLE_ALL)){ + putstr("status = "); + puthex32_nl(status); + } + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int +main(void) +{ + u2_init(); + + output_regs->led_src = 0x3; // h/w controls bottom two bits + clocks_enable_test_clk(true, 1); + + putstr("\nMIMO Tx Slave\n"); + + cpu_tx_buf_dest_port = PORT_SERDES; + + // ethernet_register_link_changed_callback(link_changed_callback); + // ethernet_init(); + + clocks_mimo_config(MC_WE_LOCK_TO_MIMO); + + // puts("post clocks_mimo_config"); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + +#if 0 + output_regs->debug_mux_ctrl = 1; + hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); + hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + //output_regs->flush_icache = 1; + + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // puts("post dbsm_init's"); + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // program tx registers + setup_tx(); + + // puts("post setup_tx"); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + // puts("post dbsm_start"); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} diff --git a/firmware/microblaze/apps/cruft/rcv_eth_packets.c b/firmware/microblaze/apps/cruft/rcv_eth_packets.c new file mode 100644 index 000000000..03fc94354 --- /dev/null +++ b/firmware/microblaze/apps/cruft/rcv_eth_packets.c @@ -0,0 +1,233 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "memcpy_wa.h" +#include +#include + + +// ---------------------------------------------------------------- + +static eth_mac_addr_t dst_mac_addr = + {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; + + +// ---------------------------------------------------------------- + +#define PACKET_SIZE 1500 // bytes +#define ETH_DATA_RATE 1000000 // 1MB/s +#define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s + +#define TIMER_RATE 100000000 // 100 MHz clock + +static int timer_delta = TIMER_RATE/ETH_PACKET_RATE; // ticks between interrupts + +static volatile bool send_packet_now = false; // timer handler sets this +static volatile bool link_is_up = false; // eth handler sets this + +int packet_number = 0; + +// ---------------------------------------------------------------- + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + link_is_up = true; + break; + + case 100: + v = LS_100; + link_is_up = true; + break; + + case 1000: + v = LS_100; + link_is_up = true; + break; + + default: + v = 0; + link_is_up = false; + break; + } + + //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + putstr("\neth link changed: speed = "); + puthex16_nl(speed); +} + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = 1; +} + + +void +buffer_irq_handler(unsigned irq) +{ + // FIXME +} + +static void +init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) +{ + int i = 0; + int mark = ((bufnum & 0xff) << 24) | 0x005A0000; + + for (i = 0; i < BP_NLINES; i++){ + buf[i] = mark | i; + mark ^= 0x00FF0000; + } + + // copy header into buffer + memcpy_wa(buf, pkt, sizeof(*pkt)); +} + +static void +init_packets(void) +{ + int i; + + u2_eth_packet_t pkt __attribute__((aligned (4))); + + pkt.ehdr.dst = dst_mac_addr; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + + // fill ALL buffers for debugging + for (i = 0; i < 8; i++) + init_packet((void *)buffer_ram(i), &pkt, i); +} + +int +main(void) +{ + u2_init(); + + int prev_leds = -1; + int new_leds = 0x00; + output_regs->leds = 0x00; + + int peak_hold_count = 0; + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\nrcv_eth_packets\n"); + + init_packets(); + + // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now + + // FIXME turn off timer since I don't think MTS and MFS instructions are implemented + // pic_register_handler(IRQ_TIMER, timer_irq_handler); + // hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + //eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 + + // kick off a receive + bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); + + while(1){ + // u2_eth_packet_t pkt; + + new_leds = 0; + if (link_is_up) + new_leds = 0x2; + + if ((buffer_pool_status->status & (BPS_DONE_2|BPS_ERROR_2)) != 0){ + // we've got a packet! + +#if 0 + // copy to stack buffer so we can byte address it + memcpy_wa(&pkt, (void *)buffer_ram(2), sizeof(pkt)); + + putstr("Rx: src: "); + print_mac_addr(pkt.ehdr.dst_addr); + putstr(" dst: "); + print_mac_addr(pkt.ehdr.src_addr); + putstr(" ethtype: "); + puthex16(pkt.ehdr.ethertype); + putstr(" len: "); + int len = (buffer_pool_status->last_line[2] + 1) * 4; + puthex16_nl(len); +#else + volatile int *bp = buffer_ram(2); + int i; + for (i = 0; i < 16; i++){ + puthex8(i); + putchar(':'); + puthex32_nl(bp[i]); + } +#endif + + // kick off next receive + bp_clear_buf(2); + bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); + + peak_hold_count = 2048 * 10; + } + + if (peak_hold_count > 0){ + peak_hold_count--; + new_leds |= 0x1; + } + + if (new_leds != prev_leds){ + prev_leds = new_leds; + output_regs->leds = new_leds; + } + } + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/cruft/read_dbids.c b/firmware/microblaze/apps/cruft/read_dbids.c new file mode 100644 index 000000000..24c6d9ab4 --- /dev/null +++ b/firmware/microblaze/apps/cruft/read_dbids.c @@ -0,0 +1,59 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include + + +int main(void) +{ + u2_init(); + + puts("\nread_dbids"); + + unsigned char dbid_tx[2]; + unsigned char dbid_rx[2]; + bool ok; + + ok = eeprom_read(I2C_ADDR_TX_A, 1, dbid_tx, 2); + if (!ok){ + puts("failed to read Tx Daugherboard EEPROM"); + } + else { + putstr("Tx Daugherboard ID: "); + puthex8(dbid_tx[1]); // MSB + puthex8(dbid_tx[0]); // LSB + newline(); + } + + ok = eeprom_read(I2C_ADDR_RX_A, 1, dbid_rx, 2); + if (!ok){ + puts("failed to read Rx Daugherboard EEPROM"); + } + else { + putstr("Rx Daugherboard ID: "); + puthex8(dbid_rx[1]); // MSB + puthex8(dbid_rx[0]); // LSB + newline(); + } + + return 0; +} diff --git a/firmware/microblaze/apps/cruft/sd_bounce.c b/firmware/microblaze/apps/cruft/sd_bounce.c new file mode 100644 index 000000000..c1b48f170 --- /dev/null +++ b/firmware/microblaze/apps/cruft/sd_bounce.c @@ -0,0 +1,153 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * Loopback SERDES to SERDES + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "nonstdio.h" +#include "memset_wa.h" +#include +#include +#include +#include +#include + + + +// ---------------------------------------------------------------- + +#define SERDES_RX_BUF_0 0 +#define SERDES_RX_BUF_1 1 + +/* + * ================================================================ + * configure SD RX double buffering state machine + * ================================================================ + */ + +// receive from SERDES +buf_cmd_args_t sd_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to SERDES +buf_cmd_args_t sd_send_args = { + PORT_SERDES, + 0, // starts with packet in line 0 + 0, // filled in from list_line register +}; + +dbsm_t sd_sm; // the state machine + + + + +// ---------------------------------------------------------------- + +#if 0 +static bool +check_packet(int *buf, int nlines) +{ + bool ok = true; + int i = 0; + for (i = 0; i < nlines; i++){ + int expected = ((2*i + 0) << 16) | (2*i+1); + if (buf[i] != expected){ + ok = false; + printf("buf[%d] = 0x%x expected = 0x%x\n", i, buf[i], expected); + } + } + return ok; +} + +static void +zero_buffer(int bufno) +{ + memset_wa(buffer_ram(bufno), 0, BP_NLINES * 4); +} +#endif + + +bool +sd_rx_inspector(dbsm_t *sm, int buf_this) +{ + hal_toggle_leds(0x2); + +#if 0 + int last_line = buffer_pool_status->last_line[buf_this]; + bool ok = check_packet(buffer_ram(buf_this), last_line); + static int good = 0; + static int bad = 0; + + if (ok) + good++; + else + bad++; + + if(good+bad == 10000) { + printf("Good %d\tBad %d\n",good,bad); + good = 0; + bad = 0; + } +#endif + + return false; +} + + +inline static void +buffer_irq_handler(void) +{ + uint32_t status = buffer_pool_status->status; + dbsm_process_status(&sd_sm, status); +} + + +int +main(void) +{ + u2_init(); + + putstr("\nsd_bounce\n"); + + // Get our clock from the mimo interface + clocks_mimo_config(MC_WE_LOCK_TO_MIMO); + + dbsm_init(&sd_sm, SERDES_RX_BUF_0, + &sd_recv_args, &sd_send_args, + sd_rx_inspector); + + // kick off the state machine + dbsm_start(&sd_sm); + + while(1){ + buffer_irq_handler(); + } +} diff --git a/firmware/microblaze/apps/cruft/sd_gentest.c b/firmware/microblaze/apps/cruft/sd_gentest.c new file mode 100644 index 000000000..35e912615 --- /dev/null +++ b/firmware/microblaze/apps/cruft/sd_gentest.c @@ -0,0 +1,269 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "nonstdio.h" +#include "memset_wa.h" +#include +#include +#include +#include +#include + +// ---------------------------------------------------------------- + +int packet_number = 0; +volatile bool send_packet_now = 0; + +#define SERDES_TX_BUF 0 +#define SERDES_RX_BUF 1 + + +#define NLINES_PER_PKT 380 + + +// ---------------------------------------------------------------- + +//static int timer_delta = (int)(MASTER_CLK_RATE * 100e-6); +static int timer_delta = 1000000; // .01 second + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout + send_packet_now = true; +} + + +static void +init_packet(int *buf) +{ + int i = 0; + for (i = 0; i < BP_NLINES; i++){ + buf[i] = ((2*i + 0) << 16) | (2*i+1); + } +} + +static bool +check_packet(int *buf, int nlines) +{ + bool ok = true; + int i = 0; + for (i = 0; i < nlines; i++){ + int expected = ((2*i + 0) << 16) | (2*i+1); + if (buf[i] != expected){ + ok = false; + printf("buf[%d] = 0x%x expected = 0x%x\n", i, buf[i], expected); + } + } + return ok; +} + +static void +zero_buffer(int bufno) +{ + memset_wa(buffer_ram(bufno), 0, BP_NLINES * 4); +} + +static void +init_packets(void) +{ + // init just the one we're using + init_packet(buffer_ram(SERDES_TX_BUF)); +} + +int +main(void) +{ + u2_init(); + + // We're free running and provide clock to the MIMO interface + clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); + + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + // output_regs->debug_mux_ctrl = 1; + // hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + // hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\nsd_gentest\n"); + + // Set up serdes (already enabled) + //output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN | SERDES_LOOPEN); + //output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN); + + init_packets(); + + // pic_register_handler(IRQ_TIMER, timer_irq_handler); + + //if (hwconfig_simulation_p()) + // timer_delta = sim_timer_delta; + + // start a receive from sd + zero_buffer(SERDES_RX_BUF); + bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); + + // fire off the first packet + bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); + hal_set_timeout(timer_delta); + int ready_to_send = 0; + + int counter __attribute__((unused)) = 0; + int sent = 1; + int txerr = 0; + int rxerr = 0; + int rcvd = 0; + int rxcrc = 0; + int sent_acc = 0; + int txerr_acc = 0; + int rxerr_acc = 0; + int rcvd_acc = 0; + int rxcrc_acc = 0; + +#define EXPECTING_PKT() ((counter & 0x1) == 0) +#define SEND_PKT() ((counter & 0x1) != 0) + + bool got_packet = false; + + while(1){ + uint32_t status = buffer_pool_status->status; + + if (status & (BPS_DONE(SERDES_RX_BUF))){ + bp_clear_buf(SERDES_RX_BUF); + got_packet = true; + + //hal_toggle_leds(0x2); + + // check packet + int last_line = buffer_pool_status->last_line[SERDES_RX_BUF]-1; + bool ok = check_packet(buffer_ram(SERDES_RX_BUF), last_line); + + if (ok) { + rcvd++; + //putchar('r'); + } + else { + rcvd++; + rxcrc++; + //putchar('P'); + } + // start a receive from sd + zero_buffer(SERDES_RX_BUF); + bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); + } + + if (status & (BPS_ERROR(SERDES_RX_BUF))){ + bp_clear_buf(SERDES_RX_BUF); + got_packet = true; + rcvd++; + rxerr++; + //putchar('E'); + + // start a receive from sd + zero_buffer(SERDES_RX_BUF); + bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); + } + + if (status & (BPS_DONE(SERDES_TX_BUF))){ + bp_clear_buf(SERDES_TX_BUF); + //putchar('t'); + bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); + //mdelay(1); + int i; + for (i = 0; i < 50; i++){ + asm volatile ("or r0, r0, r0\n\ + or r0, r0, r0\n \ + or r0, r0, r0\n \ + or r0, r0, r0\n \ + or r0, r0, r0\n \ + or r0, r0, r0\n \ + or r0, r0, r0\n"); + } + sent ++; + ready_to_send = 1; + //hal_toggle_leds(0x1); + } + + if (status & BPS_ERROR(SERDES_TX_BUF)){ + bp_clear_buf(SERDES_TX_BUF); + sent++; + txerr++; + ready_to_send = 1; + //putchar('X'); + } + + if(sent >=1000) { + printf("Status\tSENT %d\tTXERR %d\t",sent,txerr); + printf("RX %d\tERR %d\tCRC %d\tMISSED %d\n",rcvd, rxerr, rxcrc, sent-rcvd); + sent_acc += sent; sent = 0; + txerr_acc += txerr; txerr = 0; + rcvd_acc += rcvd; rcvd = 0; + rxerr_acc += rxerr; rxerr = 0; + rxcrc_acc += rxcrc; rxcrc = 0; + } + + if(sent_acc >=10000) { + printf("\nOverall\tSENT %d\tTXERR %d\t",sent_acc,txerr_acc); + printf("RX %d\tERR %d\tCRC %d\tMISSED %d\n\n",rcvd_acc, rxerr_acc, rxcrc_acc, sent_acc-rcvd_acc); + sent_acc = 0; + txerr_acc = 0; + rcvd_acc = 0; + rxerr_acc = 0; + rxcrc_acc = 0; + } +#if 0 + int pending = pic_regs->pending; + if (pending & PIC_TIMER_INT){ + hal_set_timeout(timer_delta); + + /* + if (EXPECTING_PKT()){ + if (!got_packet) + putchar('T'); + got_packet = false; + } + + if (SEND_PKT()){ + if (status & BPS_IDLE(SERDES_TX_BUF)) + bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); + } + counter++; + */ + + putchar('T'); + if(ready_to_send) { + bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); + counter++; + ready_to_send = 0; + } + + pic_regs->pending = PIC_TIMER_INT; // clear pending interrupt + } +#endif + } + + return 0; +} diff --git a/firmware/microblaze/apps/cruft/serdes_to_dsp.c b/firmware/microblaze/apps/cruft/serdes_to_dsp.c new file mode 100644 index 000000000..4994e0a69 --- /dev/null +++ b/firmware/microblaze/apps/cruft/serdes_to_dsp.c @@ -0,0 +1,179 @@ +/* + * Copyright 2007,2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common.h" +#include +#include +#include + + +/* + * This program can respond to queries from the host + * and stream rx samples. + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu +//#define CPU_TX_BUF 1 // cpu -> eth + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + +/* + * ================================================================ + * configure DSP TX double buffering state machine + * ================================================================ + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + + +// ---------------------------------------------------------------- + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +void +start_rx_cmd(const eth_mac_addr_t *host, op_start_rx_t *p) +{ +} + +void +stop_rx_cmd(void) +{ +} + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + op_config_tx_t def_config; + memset(&def_config, 0, sizeof(def_config)); + def_config.phase_inc = 408021893; // 9.5 MHz [2**32 * fc/fsample] + def_config.scale_iq = (tx_scale << 16) | tx_scale; + def_config.interp = interp; + + // setup Tx DSP regs + config_tx_cmd(&def_config); +} + + +inline static void +buffer_irq_handler(unsigned irq) +{ + //hal_toggle_leds(0x2); + + uint32_t status = buffer_pool_status->status; + + dbsm_process_status(&dsp_tx_sm, status); + + if (status & BPS_DONE(CPU_TX_BUF)){ + bp_clear_buf(CPU_TX_BUF); + } +} + +int +main(void) +{ + u2_init(); + + // Get our clock from the mimo interface + + clocks_enable_test_clk(true,1); + clocks_mimo_config(MC_WE_LOCK_TO_MIMO); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\nserdes_to_dsp\n"); + + ethernet_register_link_changed_callback(link_changed_callback); + ethernet_init(); + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + // program tx registers + setup_tx(); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + while(1){ + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + } +} + diff --git a/firmware/microblaze/apps/cruft/serdes_txrx.c b/firmware/microblaze/apps/cruft/serdes_txrx.c new file mode 100644 index 000000000..2c47c9628 --- /dev/null +++ b/firmware/microblaze/apps/cruft/serdes_txrx.c @@ -0,0 +1,368 @@ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "dbsm.h" +#include "app_common_v2.h" +#include "memcpy_wa.h" +#include "clocks.h" +#include +#include +#include + + +#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) + +#if (FW_SETS_SEQNO) +static int fw_seqno; // used when f/w is filling in sequence numbers +#endif + + +/* + * Full duplex Tx and Rx between serdes and DSP pipelines + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow + * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu + +#define DSP_RX_BUF_0 2 // dsp rx -> serdes (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> serdes +#define DSP_TX_BUF_0 4 // serdes -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // serdes -> dsp tx + +/* + * ================================================================== + * configure DSP TX double buffering state machine (serdes -> dsp) + * ================================================================== + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) + +// Receive from serdes +buf_cmd_args_t dsp_tx_recv_args = { + PORT_SERDES, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past transport header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * ================================================================= + * configure DSP RX double buffering state machine (dsp -> serdes) + * ================================================================= + */ + +// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) + +// receive from DSP +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to serdes +buf_cmd_args_t dsp_rx_send_args = { + PORT_SERDES, + 0, // starts with ethernet header in line 0 + 0, // filled in from list_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +// variables for streaming mode + +static bool streaming_p = false; +static unsigned int streaming_items_per_frame = 0; +static int streaming_frame_count = 0; +#define FRAMES_PER_CMD 1000 + +bool is_streaming(void){ return streaming_p; } + +// ---------------------------------------------------------------- + + +void +restart_streaming(void) +{ + // setup RX DSP regs + dsp_rx_regs->clear_state = 1; // reset + + streaming_p = true; + streaming_frame_count = FRAMES_PER_CMD; + + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); // set "chain" bit + + // kick off the state machine + dbsm_start(&dsp_rx_sm); + + dsp_rx_regs->rx_time = 0; // enqueue first of two commands + + // make sure this one and the rest have the "now" and "chain" bits set. + dsp_rx_regs->rx_command = + MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, + streaming_items_per_frame, + 1, 1); + + dsp_rx_regs->rx_time = 0; // enqueue second command +} + +void +start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) +{ + host_mac_addr = *host; // remember who we're sending to + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, 0, 0); + // DSP RX will fill in timestamp + + memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); + + + if (FW_SETS_SEQNO) + fw_seqno = 0; + + streaming_items_per_frame = p->items_per_frame; + restart_streaming(); +} + + +void +stop_rx_cmd(void) +{ + streaming_p = false; + dsp_rx_regs->clear_state = 1; // flush cmd queue + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); +} + + +static void +setup_tx() +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + + int tx_scale = 256; + int interp = 32; + + // setup some defaults + + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = interp; +} + + +#if (FW_SETS_SEQNO) +/* + * Debugging ONLY. This will be handled by the tx_protocol_engine. + * + * This is called when the DSP Rx chain has filled in a packet. + * We set and increment the seqno, then return false, indicating + * that we didn't handle the packet. A bit of a kludge + * but it should work. + */ +bool +fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false +{ + uint32_t *p = buffer_ram(buf_this); + uint32_t seqno = fw_seqno++; + + // KLUDGE all kinds of nasty magic numbers and embedded knowledge + uint32_t t = p[4]; + t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); + p[4] = t; + + // queue up another rx command when required + if (streaming_p && --streaming_frame_count == 0){ + streaming_frame_count = FRAMES_PER_CMD; + dsp_rx_regs->rx_time = 0; + } + + return false; // we didn't handle the packet +} +#endif + + +inline static void +buffer_irq_handler(unsigned irq) +{ + // hal_toggle_leds(LED_A); + + uint32_t status = buffer_pool_status->status; + + if (0 && (status & ~BPS_IDLE_ALL)){ + putstr("status = "); + puthex32_nl(status); + } + + dbsm_process_status(&dsp_tx_sm, status); + dbsm_process_status(&dsp_rx_sm, status); +} + +int +main(void) +{ + u2_init(); + + output_regs->led_src = 0x3; // h/w controls bottom two bits + clocks_enable_test_clk(true, 1); + + putstr("\nSERDES TxRx\n"); + + cpu_tx_buf_dest_port = PORT_SERDES; + + // ethernet_register_link_changed_callback(link_changed_callback); + // ethernet_init(); + + clocks_mimo_config(MC_WE_LOCK_TO_MIMO); + + // puts("post clocks_mimo_config"); + +#if 0 + // make bit 15 of Tx gpio's be a s/w output + hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); + hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); +#endif + +#if 0 + output_regs->debug_mux_ctrl = 1; + hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); + hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); + hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); + hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); +#endif + + + // initialize double buffering state machine for ethernet -> DSP Tx + + dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, + &dsp_tx_recv_args, &dsp_tx_send_args, + eth_pkt_inspector); + + + //output_regs->flush_icache = 1; + + // initialize double buffering state machine for DSP RX -> Ethernet + + if (FW_SETS_SEQNO){ + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + fw_sets_seqno_inspector); + } + else { + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + } + + // puts("post dbsm_init's"); + + // tell app_common that this dbsm could be sending to the ethernet + ac_could_be_sending_to_eth = &dsp_rx_sm; + + + // program tx registers + setup_tx(); + + // puts("post setup_tx"); + + // kick off the state machine + dbsm_start(&dsp_tx_sm); + + // puts("post dbsm_start"); + + //int which = 0; + + while(1){ + // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); + // which ^= 0x8000; + + buffer_irq_handler(0); + + int pending = pic_regs->pending; // poll for under or overrun + + if (pending & PIC_UNDERRUN_INT){ + dbsm_handle_tx_underrun(&dsp_tx_sm); + pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt + putchar('U'); + } + + if (pending & PIC_OVERRUN_INT){ + dbsm_handle_rx_overrun(&dsp_rx_sm); + pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + + // FIXME Figure out how to handle this robustly. + // Any buffers that are emptying should be allowed to drain... + + if (streaming_p){ + // restart_streaming(); + // FIXME report error + } + else { + // FIXME report error + } + putchar('O'); + } + } +} diff --git a/firmware/microblaze/apps/cruft/set_hw_rev.c b/firmware/microblaze/apps/cruft/set_hw_rev.c new file mode 100644 index 000000000..d4ac8ff81 --- /dev/null +++ b/firmware/microblaze/apps/cruft/set_hw_rev.c @@ -0,0 +1,45 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include +#include +#include +#include + +#define HW_REV_MAJOR 0 +#define HW_REV_MINOR 3 + +int +main(void) +{ + u2_init(); + + putstr("\nset_hw_rev\n"); + + bool ok = true; + unsigned char maj = HW_REV_MAJOR; + unsigned char min = HW_REV_MINOR; + ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); + ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); + + if (ok) + printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + else + printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); + + return 0; +} diff --git a/firmware/microblaze/apps/cruft/test1.c b/firmware/microblaze/apps/cruft/test1.c new file mode 100644 index 000000000..c3cc3be56 --- /dev/null +++ b/firmware/microblaze/apps/cruft/test1.c @@ -0,0 +1,282 @@ +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include "nonstdio.h" + +// Globals +#define EMPTY 0 +#define FILLING 1 +#define FULL 2 +#define EMPTYING 3 + +#define PORT 2 // ethernet = 2, serdes = 0 +int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; +int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; + +int buffer_state[4]; + + +void double_buffering(int port); + +// +// We register this in the secondary interrupt vector. +// It's called on buffer manager interrupts +// +void +buffer_irq_handler(unsigned irq) +{ + double_buffering(PORT); +} + +int +main(void) +{ + int i; + + u2_init(); + + // Control LEDs + output_regs->leds = 0x02; + + // Turn on ADCs + output_regs->adc_ctrl = 0x0A; + + // Set up TX Chain + dsp_tx_regs->freq = 0; + dsp_tx_regs->scale_iq = (1 << 16) | 1; + dsp_tx_regs->interp_rate = 8; + + // Set up RX Chain + dsp_rx_regs->freq = 0; + dsp_rx_regs->scale_iq = (1 << 16) | 1; + dsp_rx_regs->decim_rate = 8; + + // Set up buffer control, using only 4 for now + for(i=0;i<4;i++) + buffer_state[i] = EMPTY; + + // Set up DSP RX + buffer_state[0] = FILLING; + serdes_tx_idle = 1; + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines + + //dsp_rx_regs->run_rx = 1; // Start DSP_RX + putstr("Done DSP RX setup\n"); + + // Set up serdes RX + buffer_state[2] = FILLING; + dsp_tx_idle = 1; + bp_receive_to_buf(2, PORT, 1, 5, 504); + + while (buffer_pool_status->status == 0) // wait for completion of DSP RX + ; + + putstr("Done DSP TX setup\n"); + //dsp_tx_regs->run_tx = 1; + + // register interrupt handler + pic_register_handler(IRQ_BUFFER, buffer_irq_handler); + + while (1) + ; + + hal_finish(); + return 1; +} + +void +double_buffering(int port) { + unsigned int localstatus = buffer_pool_status->status; + + if(localstatus & BPS_DONE_0) { + bp_clear_buf(0); + if(buffer_state[0] == FILLING) { + buffer_state[0] = FULL; + if(buffer_state[1] == EMPTY) { + bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[1] = FILLING; + } + else + dsp_rx_idle = 1; + if(serdes_tx_idle) { + serdes_tx_idle = 0; + bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 + buffer_state[0] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[0] = EMPTY; + if(dsp_rx_idle) { + dsp_rx_idle = 0; + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines + buffer_state[0] = FILLING; + } + if(buffer_state[1] == FULL) { + bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 + buffer_state[1] = EMPTYING; + } + else + serdes_tx_idle = 1; + } + putstr("Int Proc'ed 0\n"); + } + if(localstatus & BPS_DONE_1) { + bp_clear_buf(1); + if(buffer_state[1] == FILLING) { + buffer_state[1] = FULL; + if(buffer_state[0] == EMPTY) { + bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[0] = FILLING; + } + else + dsp_rx_idle = 1; + if(serdes_tx_idle) { + serdes_tx_idle = 0; + bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 + buffer_state[1] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[1] = EMPTY; + if(dsp_rx_idle) { + dsp_rx_idle = 0; + bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines + buffer_state[1] = FILLING; + } + if(buffer_state[0] == FULL) { + bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 + buffer_state[0] = EMPTYING; + } + else + serdes_tx_idle = 1; + } + putstr("Int Proc'ed 1\n"); + } + if(localstatus & BPS_DONE_2) { + bp_clear_buf(2); + if(buffer_state[2] == FILLING) { + buffer_state[2] = FULL; + if(buffer_state[3] == EMPTY) { + bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3, use 500 lines + buffer_state[3] = FILLING; + } + else + serdes_rx_idle = 1; + if(dsp_tx_idle) { + dsp_tx_idle = 0; + bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 + buffer_state[2] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[2] = EMPTY; + if(serdes_rx_idle) { + serdes_rx_idle = 0; + bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2 + buffer_state[2] = FILLING; + } + if(buffer_state[3] == FULL) { + bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 + buffer_state[3] = EMPTYING; + } + else + dsp_tx_idle = 1; + } + putstr("Int Proc'ed 2\n"); + } + if(localstatus & BPS_DONE_3) { + bp_clear_buf(3); + if(buffer_state[3] == FILLING) { + buffer_state[3] = FULL; + if(buffer_state[2] == EMPTY) { + bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2, use 500 lines + buffer_state[2] = FILLING; + } + else + serdes_rx_idle = 1; + if(dsp_tx_idle) { + dsp_tx_idle = 0; + bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 + buffer_state[3] = EMPTYING; + } + } + else { // buffer was emptying + buffer_state[3] = EMPTY; + if(serdes_rx_idle) { + serdes_rx_idle = 0; + bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3 + buffer_state[3] = FILLING; + } + if(buffer_state[2] == FULL) { + bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 + buffer_state[2] = EMPTYING; + } + else + dsp_tx_idle = 1; + } + putstr("Int Proc'ed 3\n"); + } +} + +// Spare Code + +#if 0 + // Set up LSDAC + int i = 0; + while(1) { + int command = (3 << 19) | (0 << 16) | (i & 0xffff); + spi_transact(SPI_TXONLY, SPI_SS_TX_DAC, command, 24, 1); // negate TX phase + i++; + } +#endif + +#if 0 + // Write to buffer 0 + int *buf = (int *)(BUFFER_BASE + BUFFER_0); + puthex_nl((int)buf); + + for(i=0;i. + */ + +#include +#include +#include +#include + +int +main(void) +{ + u2_init(); + + puts("\ntest_db_spi"); + + while(1){ + spi_transact(SPI_TXONLY, SPI_SS_RX_DB, 0xCC33, 16, SPIF_PUSH_FALL); + spi_transact(SPI_TXONLY, SPI_SS_TX_DB, 0x33CC, 16, SPIF_PUSH_FALL); + } +} diff --git a/firmware/microblaze/apps/cruft/test_i2c.c b/firmware/microblaze/apps/cruft/test_i2c.c new file mode 100644 index 000000000..f349ead88 --- /dev/null +++ b/firmware/microblaze/apps/cruft/test_i2c.c @@ -0,0 +1,108 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include /* FIXME */ +#include +#include +#include +#include + + + +#define ASSERT_TRUE(x) \ + do { \ + if (!(x)){ \ + printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + +#define ASSERT_FALSE(x) \ + do { \ + if (x){ \ + printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + + +#define BUFSIZE 128 + +int +main(void) +{ + int i; + bool ok; + int nerrors = 0; + uint8_t buf[BUFSIZE]; + int not_dev_addr = 0x35; // no device with this address on the i2c bus. + int offset; + int len; + + u2_init(); + + puts("test_i2c\n"); + + // try writing a non-existent device + buf[0] = 0xA5; + ok = i2c_write(not_dev_addr, buf, 1); + ASSERT_FALSE(ok); + + // try read from non-existent device + buf[0] = 0; + ok = i2c_read(not_dev_addr, buf, 1); + ASSERT_FALSE(ok); + + // try writing eeprom + offset = 31; + len = 8; + memset(buf, 0, sizeof(buf)); + for (i = 0; i < len; i++) + buf[i] = i; + ok = eeprom_write(I2C_ADDR_MBOARD, offset, buf, len); + ASSERT_TRUE(ok); + + // now try to read it back + offset = 31; + len = 8; + memset(buf, 0, sizeof(buf)); + ok = eeprom_read(I2C_ADDR_MBOARD, offset, buf, len); + ASSERT_TRUE(ok); + + // check result + for (i = 0; i < len; i++){ + if (buf[i] != i){ + printf("buf[%d] = %d, should be %d\n", i, buf[i], i); + nerrors++; + } + } + + if (nerrors == 0){ + output_regs->leds = 0x3; + puts("PASSED\n"); + } + else { + output_regs->leds = 0x0; + puts("FAILED\n"); + } + + hal_finish(); + return 0; +} + diff --git a/firmware/microblaze/apps/cruft/test_lsadc.c b/firmware/microblaze/apps/cruft/test_lsadc.c new file mode 100644 index 000000000..5fda29cd7 --- /dev/null +++ b/firmware/microblaze/apps/cruft/test_lsadc.c @@ -0,0 +1,57 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include + +int +main(void) +{ + u2_init(); + + puts("\ntest_lsadc"); + + uint32_t r; + + unsigned int up_counter = 0; + + while (1){ + unsigned int v; + v = up_counter; + + lsdac_write_rx(0, v << 0); + lsdac_write_rx(2, v << 1); + +#if 1 + r = lsadc_read_rx(0); + lsdac_write_rx(1, r & 0x0fff); + //puthex32_nl(r); +#endif + +#if 1 + r = lsadc_read_rx(1); + lsdac_write_rx(3, r & 0x0fff); + //puthex32_nl(r); +#endif + + up_counter++; + } +} diff --git a/firmware/microblaze/apps/cruft/test_lsdac.c b/firmware/microblaze/apps/cruft/test_lsdac.c new file mode 100644 index 000000000..8c1bf333b --- /dev/null +++ b/firmware/microblaze/apps/cruft/test_lsdac.c @@ -0,0 +1,51 @@ +/* -*- c++ -*- */ +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include + +int +main(void) +{ + u2_init(); + + puts("\ntest_lsdac"); + + unsigned int up_counter = 0; + unsigned int dn_counter = 0; + + while(1){ + unsigned int v; + v = up_counter; + lsdac_write_rx(0, v << 0); + lsdac_write_rx(1, v << 1); + lsdac_write_rx(2, v << 2); + lsdac_write_rx(3, v << 3); + + v = up_counter; + lsdac_write_tx(0, v << 0); + lsdac_write_tx(1, v << 1); + lsdac_write_tx(2, v << 2); + lsdac_write_tx(3, v << 3); + + up_counter++; + dn_counter--; + } +} diff --git a/firmware/microblaze/apps/cruft/test_phy_comm.c b/firmware/microblaze/apps/cruft/test_phy_comm.c new file mode 100644 index 000000000..d312ca4cc --- /dev/null +++ b/firmware/microblaze/apps/cruft/test_phy_comm.c @@ -0,0 +1,113 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// check communication with ethernet PHY chip + +#include "u2_init.h" +#include "memory_map.h" +#include "hal_io.h" +#include "ethernet.h" +#include "pic.h" +#include "nonstdio.h" + + +#define DELTA_T 12500000 // .125s (10ns per tick) +//#define DELTA_T 10000 + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + + + +#define U2_ETHERTYPE 0xBEEF + + +static volatile int led_link_up_flag = 0; + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + led_link_up_flag = 0x2; + break; + + case 100: + v = LS_100; + led_link_up_flag = 0x2; + break; + + case 1000: + v = LS_100; + led_link_up_flag = 0x2; + break; + + default: + v = 0; + led_link_up_flag = 0; + break; + } + + //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + putstr("\neth link changed: speed = "); + puthex_nl(speed); +} + +void +timer_handler(unsigned irq) +{ + static int led_counter = 0; + + hal_set_timeout(DELTA_T); // schedule next timeout + output_regs->leds = (led_counter++ & 0x1) | led_link_up_flag; +} + +int +main(void) +{ + u2_init(); + + putstr("\n test_phy_comm\n"); + + pic_register_handler(IRQ_ONETIME, timer_handler); + hal_set_timeout(DELTA_T); // schedule timeout + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + ethernet_register_link_changed_callback(link_changed_callback); + + output_regs->phy_ctrl = 1; /* reset the eth PHY */ + output_regs->phy_ctrl = 0; + + ethernet_init(); + + while(1) + ; + + return 0; +} diff --git a/firmware/microblaze/apps/cruft/test_ram.c b/firmware/microblaze/apps/cruft/test_ram.c new file mode 100644 index 000000000..77ee693f6 --- /dev/null +++ b/firmware/microblaze/apps/cruft/test_ram.c @@ -0,0 +1,105 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include /* FIXME */ +#include +#include +#include +#include +#include + +#define ASSERT_TRUE(x) \ + do { \ + if (!(x)){ \ + printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + +#define ASSERT_FALSE(x) \ + do { \ + if (x){ \ + printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + + +#define BUFSIZE 128 + +int test_ram() +{ + int i,j,k; + output_regs->ram_page = 1<<10; + + extram[0] = 0xDEADBEEF; + extram[1] = 0xF00D1234; + extram[7] = 0x76543210; + + output_regs->ram_page = 2<<10; + extram[7] = 0x55555555; + extram[1] = 0xaaaaaaaa; + extram[0] = 0xeeeeeeee; + + output_regs->ram_page = 1<<10; + + i = extram[0]; + k = extram[1]; + j = extram[7]; + + if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { + puts("RAM FAIL1!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + + output_regs->ram_page = 2<<10; + + j = extram[7]; + k = extram[1]; + i = extram[0]; + + if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { + puts("RAM FAIL2!\n"); + puthex32_nl(i); + puthex32_nl(j); + puthex32_nl(k); + return 0; + } + return 1; +} + +int +main(void) +{ + + u2_init(); + puts("\ntest_ram\n"); + int success = test_ram(); + if(success) + puts("RAM Passed Tests\n"); + else + puts("RAM Failed\n"); + + hal_finish(); + return 0; +} + diff --git a/firmware/microblaze/apps/cruft/test_sd.c b/firmware/microblaze/apps/cruft/test_sd.c new file mode 100644 index 000000000..494432d7f --- /dev/null +++ b/firmware/microblaze/apps/cruft/test_sd.c @@ -0,0 +1,81 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include /* FIXME */ +#include +#include +#include +#include + + +#define ASSERT_TRUE(x) \ + do { \ + if (!(x)){ \ + printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + +#define ASSERT_FALSE(x) \ + do { \ + if (x){ \ + printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ + nerrors++; \ + } \ + } while(0) + + +#define BUFSIZE 128 + +int +main(void) +{ + int i; + unsigned char buf[512]; + + u2_init(); + + puts("\ntest_sd\n"); + + + i = sd_init(); + if(i) + puts("Successfully Init'ed Card\n"); + else + puts("FAILED INIT of Card\n"); + + i = sd_read_block(2048,buf); + if(i) { + puts("READ Command accepted\n"); + for(i=0;i<512;i++) + if((i&15) == 15) + puthex8_nl(buf[i]); + else { + puthex8(buf[i]); + putchar(' '); + } + } + else + puts("READ Command Rejected\n"); + + puts("Done"); + hal_finish(); + return 0; +} + diff --git a/firmware/microblaze/apps/cruft/timer_test.c b/firmware/microblaze/apps/cruft/timer_test.c new file mode 100644 index 000000000..44e80b5f1 --- /dev/null +++ b/firmware/microblaze/apps/cruft/timer_test.c @@ -0,0 +1,57 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "u2_init.h" +#include "memory_map.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include "nonstdio.h" +#include "hal_io.h" + +#define DELTA_T 500 // 5 us (10ns per tick) + + +void +timer_handler(unsigned irq) +{ + hal_set_timeout(DELTA_T); + + putstr("Tick: "); + puthex_nl(0); +} + +int +main(void) +{ + u2_init(); + + // setup timer + + putstr("Setting up timer\n"); + pic_register_handler(IRQ_ONETIME, timer_handler); + + hal_set_timeout(DELTA_T); + + while (1) + ; + + putstr("Done Testing\n"); + + hal_finish(); + return 1; +} diff --git a/firmware/microblaze/apps/cruft/tx_standalone.c b/firmware/microblaze/apps/cruft/tx_standalone.c new file mode 100644 index 000000000..1645fa8ba --- /dev/null +++ b/firmware/microblaze/apps/cruft/tx_standalone.c @@ -0,0 +1,339 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef HAVE_CONFIG_H +#include "config.h" +#endif + +#include "u2_init.h" +#include "memory_map.h" +#include "spi.h" +#include "hal_io.h" +#include "buffer_pool.h" +#include "pic.h" +#include +#include "ethernet.h" +#include "nonstdio.h" +#include "usrp2_eth_packet.h" +#include "memcpy_wa.h" +#include "dbsm.h" +#include +#include +#include + +#define _AL4 __attribute__((aligned (4))) + +#define USE_BUFFER_INTERRUPT 0 // 0 or 1 + + +static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz + +/* + * This program can respond to queries from the host + * and stream rx samples. + * + * Buffer 1 is used by the cpu to send frames to the host. + * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow + * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow + */ +//#define CPU_RX_BUF 0 // eth -> cpu +#define CPU_TX_BUF 1 // cpu -> eth + +#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) +#define DSP_RX_BUF_1 3 // dsp rx -> eth +#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) +#define DSP_TX_BUF_1 5 // eth -> dsp tx + + +/* + * ================================================================ + * configure DSP RX double buffering state machine + * ================================================================ + */ + + +// 4 lines of ethernet hdr + 1 line (word0) +// DSP Rx writes timestamp followed by nlines_per_frame of samples +#define DSP_RX_FIRST_LINE 5 +#define DSP_RX_SAMPLES_PER_FRAME 128 +#define DSP_RX_EXTRA_LINES 1 // writes timestamp + +// Receive from DSP Rx +buf_cmd_args_t dsp_rx_recv_args = { + PORT_DSP, + DSP_RX_FIRST_LINE, + BP_LAST_LINE +}; + +// send to ethernet +buf_cmd_args_t dsp_rx_send_args = { + PORT_ETH, + 0, // starts with ethernet header in line 0 + 0, // filled in from last_line register +}; + +dbsm_t dsp_rx_sm; // the state machine + +/* + * ================================================================ + * configure DSP TX double buffering state machine + * ================================================================ + */ + +// 4 lines of ethernet hdr + 2 lines (word0 + timestamp) +// DSP Tx reads word0 (flags) + timestamp followed by samples + +#define DSP_TX_FIRST_LINE 4 +#define DSP_TX_SAMPLES_PER_FRAME 250 // not used except w/ debugging +#define DSP_TX_EXTRA_LINES 2 // reads word0 + timestamp + +// Receive from ethernet +buf_cmd_args_t dsp_tx_recv_args = { + PORT_ETH, + 0, + BP_LAST_LINE +}; + +// send to DSP Tx +buf_cmd_args_t dsp_tx_send_args = { + PORT_DSP, + DSP_TX_FIRST_LINE, // starts just past ethernet header + 0 // filled in from last_line register +}; + +dbsm_t dsp_tx_sm; // the state machine + +/* + * send constant buffer to DSP TX + */ +static inline void +SEND_CONST_TO_DSP_TX(void) +{ + bp_send_from_buf(DSP_TX_BUF_0, PORT_DSP, 1, + DSP_TX_FIRST_LINE, + DSP_TX_FIRST_LINE + DSP_TX_EXTRA_LINES + DSP_TX_SAMPLES_PER_FRAME - 1); +} + +// ---------------------------------------------------------------- + + + +// The mac address of the host we're sending to. +eth_mac_addr_t host_mac_addr; + + +void link_changed_callback(int speed); +static volatile bool link_is_up = false; // eth handler sets this + + +void +timer_irq_handler(unsigned irq) +{ + hal_set_timeout(timer_delta); // schedule next timeout +} + +// Tx DSP underrun +void +underrun_irq_handler(unsigned irq) +{ + dsp_tx_regs->clear_state = 1; + bp_clear_buf(DSP_TX_BUF_0); + bp_clear_buf(DSP_TX_BUF_1); + dbsm_stop(&dsp_tx_sm); + + // FIXME anything else? + + putstr("\nirq: underrun\n"); +} + +// Rx DSP overrun +void +overrun_irq_handler(unsigned irq) +{ + dsp_rx_regs->clear_state = 1; + bp_clear_buf(DSP_RX_BUF_0); + bp_clear_buf(DSP_RX_BUF_1); + dbsm_stop(&dsp_rx_sm); + + // FIXME anything else? + + putstr("\nirq: overrun\n"); +} + +static void +start_tx_transfers(void) +{ + bp_clear_buf(DSP_TX_BUF_0); // FIXME, really goes in state machine + bp_clear_buf(DSP_TX_BUF_1); + + // fill everything with a constant 32k + 0j + + uint32_t const_sample = (32000 << 16) | 0; + int i; + for (i = 0; i < BP_NLINES; i++){ + buffer_ram(DSP_TX_BUF_0)[i] = const_sample; + buffer_ram(DSP_TX_BUF_1)[i] = const_sample; + } + + /* + * Construct ethernet header and word0 and preload into two buffers + */ + u2_eth_packet_t pkt; + memset(&pkt, 0, sizeof(pkt)); + //pkt.ehdr.dst = *host; + pkt.ehdr.src = *ethernet_mac_addr(); + pkt.ehdr.ethertype = U2_ETHERTYPE; + u2p_set_word0(&pkt.fixed, + U2P_TX_IMMEDIATE | U2P_TX_START_OF_BURST, 0); + u2p_set_timestamp(&pkt.fixed, T_NOW); + + memcpy_wa(buffer_ram(DSP_TX_BUF_0), &pkt, sizeof(pkt)); + memcpy_wa(buffer_ram(DSP_TX_BUF_1), &pkt, sizeof(pkt)); + + + int tx_scale = 256; + + // setup Tx DSP regs + dsp_tx_regs->clear_state = 1; // reset + dsp_tx_regs->freq = 408021893; // 9.5 MHz [2**32 * fc/fsample] + dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; + dsp_tx_regs->interp_rate = 32; + + // kick off the state machine + // dbsm_start(&dsp_rx_sm); + + SEND_CONST_TO_DSP_TX(); // send constant buffer to DSP TX +} + + +void +buffer_irq_handler(unsigned irq) +{ + uint32_t status = buffer_pool_status->status; + + if (0){ + putstr("irq: "); + puthex32(status); + putchar('\n'); + } + + if (status & BPS_ERROR_ALL){ + // FIXME rare path, handle error conditions + } + + if (status & BPS_DONE(DSP_TX_BUF_0)){ + bp_clear_buf(DSP_TX_BUF_0); + SEND_CONST_TO_DSP_TX(); + hal_toggle_leds(0x1); + } + +} + +int +main(void) +{ + u2_init(); + + // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output + //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); + //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); + + putstr("\ntx_only\n"); + + // Control LEDs + hal_set_leds(0x0, 0x3); + + if (USE_BUFFER_INTERRUPT) + pic_register_handler(IRQ_BUFFER, buffer_irq_handler); + + pic_register_handler(IRQ_OVERRUN, overrun_irq_handler); + pic_register_handler(IRQ_UNDERRUN, underrun_irq_handler); + + //pic_register_handler(IRQ_TIMER, timer_irq_handler); + //hal_set_timeout(timer_delta); + + ethernet_register_link_changed_callback(link_changed_callback); + + ethernet_init(); + + // initialize double buffering state machine for DSP RX -> Ethernet + dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, + &dsp_rx_recv_args, &dsp_rx_send_args, + dbsm_nop_inspector); + + // setup receive from ETH + // bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); + +#if 0 + if (hwconfig_simulation_p()){ + // If we're simulating, pretend that we got a start command from the host + eth_mac_addr_t host = {{ 0x00, 0x0A, 0xE4, 0x3E, 0xD2, 0xD5 }}; + start_rx_cmd(&host); + } +#endif + + start_tx_transfers(); // send constant buffers to DSP TX + + while(1){ + if (!USE_BUFFER_INTERRUPT) + buffer_irq_handler(0); + } +} + +// ---------------------------------------------------------------- + +// debugging output on tx pins +#define LS_MASK 0xE0000 +#define LS_1000 0x80000 +#define LS_100 0x40000 +#define LS_10 0x20000 + +/* + * Called when eth phy state changes (w/ interrupts disabled) + */ +void +link_changed_callback(int speed) +{ + int v = 0; + switch(speed){ + case 10: + v = LS_10; + link_is_up = true; + break; + + case 100: + v = LS_100; + link_is_up = true; + break; + + case 1000: + v = LS_100; + link_is_up = true; + break; + + default: + v = 0; + link_is_up = false; + break; + } + + //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ + + // hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); + + printf("\neth link changed: speed = %d\n", speed); +} diff --git a/firmware/microblaze/apps/double_buffer_fragment.c b/firmware/microblaze/apps/double_buffer_fragment.c deleted file mode 100644 index cfc061247..000000000 --- a/firmware/microblaze/apps/double_buffer_fragment.c +++ /dev/null @@ -1,138 +0,0 @@ -#if 0 -void -double_buffering(int port) { - unsigned int localstatus = buffer_pool_status->status; - - if(localstatus & BPS_DONE_0) { - bp_clear_buf(0); - if(buffer_state[0] == FILLING) { - buffer_state[0] = FULL; - if(buffer_state[1] == EMPTY) { - bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[1] = FILLING; - } - else - dsp_rx_idle = 1; - if(serdes_tx_idle) { - serdes_tx_idle = 0; - bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 - buffer_state[0] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[0] = EMPTY; - if(dsp_rx_idle) { - dsp_rx_idle = 0; - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines - buffer_state[0] = FILLING; - } - if(buffer_state[1] == FULL) { - bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 - buffer_state[1] = EMPTYING; - } - else - serdes_tx_idle = 1; - } - putstr("Int Proc'ed 0\n"); - } - - if(localstatus & BPS_DONE_1) { - bp_clear_buf(1); - if(buffer_state[1] == FILLING) { - buffer_state[1] = FULL; - if(buffer_state[0] == EMPTY) { - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[0] = FILLING; - } - else - dsp_rx_idle = 1; - if(serdes_tx_idle) { - serdes_tx_idle = 0; - bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 - buffer_state[1] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[1] = EMPTY; - if(dsp_rx_idle) { - dsp_rx_idle = 0; - bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[1] = FILLING; - } - if(buffer_state[0] == FULL) { - bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 - buffer_state[0] = EMPTYING; - } - else - serdes_tx_idle = 1; - } - putstr("Int Proc'ed 1\n"); - } - - if(localstatus & BPS_DONE_2) { - bp_clear_buf(2); - if(buffer_state[2] == FILLING) { - buffer_state[2] = FULL; - if(buffer_state[3] == EMPTY) { - bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3, use 500 lines - buffer_state[3] = FILLING; - } - else - serdes_rx_idle = 1; - if(dsp_tx_idle) { - dsp_tx_idle = 0; - bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 - buffer_state[2] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[2] = EMPTY; - if(serdes_rx_idle) { - serdes_rx_idle = 0; - bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2 - buffer_state[2] = FILLING; - } - if(buffer_state[3] == FULL) { - bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 - buffer_state[3] = EMPTYING; - } - else - dsp_tx_idle = 1; - } - putstr("Int Proc'ed 2\n"); - } - - if(localstatus & BPS_DONE_3) { - bp_clear_buf(3); - if(buffer_state[3] == FILLING) { - buffer_state[3] = FULL; - if(buffer_state[2] == EMPTY) { - bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2, use 500 lines - buffer_state[2] = FILLING; - } - else - serdes_rx_idle = 1; - if(dsp_tx_idle) { - dsp_tx_idle = 0; - bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 - buffer_state[3] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[3] = EMPTY; - if(serdes_rx_idle) { - serdes_rx_idle = 0; - bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3 - buffer_state[3] = FILLING; - } - if(buffer_state[2] == FULL) { - bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 - buffer_state[2] = EMPTYING; - } - else - dsp_tx_idle = 1; - } - putstr("Int Proc'ed 3\n"); - } -} -#endif diff --git a/firmware/microblaze/apps/echo.c b/firmware/microblaze/apps/echo.c deleted file mode 100644 index 89108ee80..000000000 --- a/firmware/microblaze/apps/echo.c +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "u2_init.h" -#include "stdio.h" - -int -main(void) -{ - u2_init(); - - puts("\n>>> echo <<<"); - - while (1){ - int ch = getchar(); - putchar(ch); - } - - return 0; -} diff --git a/firmware/microblaze/apps/eth_serdes.c b/firmware/microblaze/apps/eth_serdes.c deleted file mode 100644 index 2d2ddc1ca..000000000 --- a/firmware/microblaze/apps/eth_serdes.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_passthru_v2.h" -#include "memcpy_wa.h" -#include "clocks.h" -#include -#include -#include - - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno __attribute__((unused)); // used when f/w is filling in sequence numbers -#endif - - -/* - * Full duplex Tx and Rx between ethernet and serdes - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // serdes -> eth (double buffer) -#define DSP_RX_BUF_1 3 // serdes -> eth -#define DSP_TX_BUF_0 4 // eth -> serdes (double buffer) -#define DSP_TX_BUF_1 5 // eth -> serdes - -/* - * ================================================================ - * configure serdes double buffering state machine (eth -> serdes) - * ================================================================ - */ - - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to serdes -buf_cmd_args_t dsp_tx_send_args = { - PORT_SERDES, - 0, - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ==================================================================== - * configure serdes RX double buffering state machine (serdes -> eth) - * ==================================================================== - */ - -// receive from serdes -buf_cmd_args_t dsp_rx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to ETH -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// ---------------------------------------------------------------- - - -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ - -bool -fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false -{ -#if 0 - uint32_t *p = buffer_ram(buf_this); - uint32_t last_line = buffer_pool_status->last_line[buf_this] - sm->last_line_adj; - printf("fw_sets_seqno_inspector: buf_this = %d, last_line = %d\n", - buf_this, last_line); - - print_buffer(p, (last_line + 1)); -#endif - -#if 0 - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; -#endif - - return false; // we didn't handle the packet -} -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - if (0 && (status & ~BPS_IDLE_ALL)){ - putstr("status = "); - puthex32_nl(status); - } - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - -int -main(void) -{ - u2_init(); - - output_regs->led_src = 0x3; // h/w controls bottom two bits - clocks_enable_test_clk(true, 1); - - putstr("\neth <-> serdes\n"); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - // clocks_mimo_config(MC_WE_LOCK_TO_SMA | MC_PROVIDE_CLK_TO_MIMO); - clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - -#if 1 - output_regs->debug_mux_ctrl = 1; - hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> serdes - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - // initialize double buffering state machine for serdes -> ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; - - - // kick off the state machines - dbsm_start(&dsp_tx_sm); - dbsm_start(&dsp_rx_sm); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - } -} diff --git a/firmware/microblaze/apps/factory_test.c b/firmware/microblaze/apps/factory_test.c deleted file mode 100644 index e1fbb0e40..000000000 --- a/firmware/microblaze/apps/factory_test.c +++ /dev/null @@ -1,438 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include -#include -#include -#include -#include -#include -#include "sd.h" - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno; // used when f/w is filling in sequence numbers -#endif - - -/* - * Full duplex Tx and Rx between ethernet and DSP pipelines - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> eth -#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // eth -> dsp tx - -/* - * ================================================================ - * configure DSP TX double buffering state machine (eth -> dsp) - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ================================================================ - * configure DSP RX double buffering state machine (dsp -> eth) - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to ETH -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// variables for streaming mode - -static bool streaming_p = false; -static unsigned int streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 1000 - -bool is_streaming(void){ return streaming_p; } - -// ---------------------------------------------------------------- - - -void -restart_streaming(void) -{ - // setup RX DSP regs - dsp_rx_regs->clear_state = 1; // reset - - streaming_p = true; - streaming_frame_count = FRAMES_PER_CMD; - - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); // set "chain" bit - - // kick off the state machine - dbsm_start(&dsp_rx_sm); - - dsp_rx_regs->rx_time = 0; // enqueue first of two commands - - // make sure this one and the rest have the "now" and "chain" bits set. - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); - - dsp_rx_regs->rx_time = 0; // enqueue second command -} - -void -start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) -{ - host_mac_addr = *host; // remember who we're sending to - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, 0, 0); - // DSP RX will fill in timestamp - - memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); - - - if (FW_SETS_SEQNO) - fw_seqno = 0; - - streaming_items_per_frame = p->items_per_frame; - restart_streaming(); -} - - -void -stop_rx_cmd(void) -{ - streaming_p = false; - dsp_rx_regs->clear_state = 1; // flush cmd queue - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); -} - - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 256; - int interp = 32; - - // setup some defaults - - dsp_tx_regs->freq = 0; - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = interp; -} - - -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ -bool -fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false -{ - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; - - // queue up another rx command when required - if (streaming_p && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - dsp_rx_regs->rx_time = 0; - } - - return false; // we didn't handle the packet -} -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int test_sd() -{ - int i = sd_init(); - if(i==0) { - puts("FAILED INIT of Card\n"); - return 0; - } - - unsigned char buf[512]; - i = sd_read_block(2048,buf); - if(i == 0) { - puts("READ Command Rejected\n"); - return 0; - } - if((buf[0]==0xb8)&&(buf[1]==0x08)&&(buf[2]==0x00)&&(buf[3]==0x50)) - ; - else { - puts("Read bad data from SD Card\n"); - return 0; - } - return 1; -} - -int -main(void) -{ - u2_init(); - - putstr("\nFactory Test\n"); - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - if(test_sd()) - puts("SD OK\n"); - else { - puts("SD FAIL\n"); - // hal_finish(); - //return 0; - } - if(test_ram()) - puts("RAM OK\n"); - else { - puts("RAM FAIL\n"); - hal_finish(); - return 0; - } - - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - output_regs->led_src = 0x7; // make bottom 3 controlled by HW - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - clocks_enable_tx_dboard(true,1); - clocks_mimo_config(MC_WE_LOCK_TO_SMA); -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - - output_regs->debug_mux_ctrl = 1; -#if 0 - hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - // initialize double buffering state machine for DSP RX -> Ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; - - - // program tx registers - setup_tx(); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - - if (pending & PIC_OVERRUN_INT){ - dbsm_handle_rx_overrun(&dsp_rx_sm); - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - - if (streaming_p){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } - putchar('O'); - } - } -} diff --git a/firmware/microblaze/apps/gen_eth_packets.c b/firmware/microblaze/apps/gen_eth_packets.c deleted file mode 100644 index 4d521f6bf..000000000 --- a/firmware/microblaze/apps/gen_eth_packets.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "memcpy_wa.h" -#include "print_rmon_regs.h" -#include -#include -#include - - -// ---------------------------------------------------------------- - -static eth_mac_addr_t dst_mac_addr = - {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; - -// ---------------------------------------------------------------- - -// #define PACKET_SIZE 1500 // bytes -// #define ETH_DATA_RATE 1000000 // 1MB/s -// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s - -// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts - -static int timer_delta = (int)(MASTER_CLK_RATE * 1e-3); // tick at 1 kHz -static int sim_timer_delta = (int)(MASTER_CLK_RATE * 100e-6); // tick at 10 kHz - -static volatile bool send_packet_now = false; // timer handler sets this -static volatile bool link_is_up = false; // eth handler sets this - -int packet_number = 0; - - -#define CPU_TX_BUF 0 // cpu xmits ethernet frames from here -#define CPU_RX_BUF 1 // receive ethernet frames here - -// ---------------------------------------------------------------- - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - link_is_up = speed == 0 ? false : true; - hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); - printf("\neth link changed: speed = %d\n", speed); -} - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = 1; -} - - -static void -init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) -{ - int i = 0; - int mark = ((bufnum & 0xff) << 24) | 0x005A0000; - - for (i = 0; i < BP_NLINES; i++){ - buf[i] = mark | i; - mark ^= 0x00FF0000; - } - - // copy header into buffer - memcpy_wa(buf, pkt, sizeof(*pkt)); -} - -static void -init_packets(void) -{ - u2_eth_packet_t pkt __attribute__((aligned (4))); - - memset(&pkt, 0, sizeof(pkt)); - - pkt.ehdr.dst = dst_mac_addr; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - pkt.fixed.word0 = 0x01234567; - pkt.fixed.timestamp = 0xffffffff; - - // init just the one we're using - init_packet((void *)buffer_ram(CPU_TX_BUF), &pkt, CPU_TX_BUF); -} - -int -main(void) -{ - int npackets_sent = 0; - - u2_init(); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\ngen_eth_packets\n"); - - hal_set_leds(0x0, 0x3); - - init_packets(); - - pic_register_handler(IRQ_TIMER, timer_irq_handler); - - if (hwconfig_simulation_p()) - timer_delta = sim_timer_delta; - - hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - /* - if (hwconfig_simulation_p()){ - eth_mac->speed = 4; // hardcode mac speed to 1000 - link_is_up = true; - } - */ - - // fire off a receive from the ethernet - bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); - - while(1){ - uint32_t status = buffer_pool_status->status; - - if (status & (BPS_DONE(CPU_RX_BUF) | BPS_ERROR(CPU_RX_BUF))){ - bp_clear_buf(CPU_RX_BUF); - // ignore incoming ethernet packets; they were looped back in sim - bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); - } - - if (status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))){ - if (status & BPS_ERROR(CPU_TX_BUF)){ - putchar('E'); - } - bp_clear_buf(CPU_TX_BUF); - npackets_sent++; - if ((npackets_sent & 0xF) == 0){ // print after every 16 packets - //print_rmon_regs(); - putchar('.'); - } - } - - if (link_is_up && send_packet_now && (status & BPS_IDLE(CPU_TX_BUF))){ - send_packet_now = false; - - // kick off the next packet - // FIXME set packet number in packet - - bp_send_from_buf(CPU_TX_BUF, PORT_ETH, 1, 0, 255); // 1KB total - hal_toggle_leds(0x1); - } - } - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/gen_pause_frames.c b/firmware/microblaze/apps/gen_pause_frames.c deleted file mode 100644 index 0f81dafff..000000000 --- a/firmware/microblaze/apps/gen_pause_frames.c +++ /dev/null @@ -1,207 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "u2_eth_packet.h" -#include "memcpy_wa.h" -#include -#include - - -// ---------------------------------------------------------------- - -unsigned char dst_mac_addr[6] = { - 0xff, 0xff, 0xff, 0xff, 0xff, 0xff -}; - -// ---------------------------------------------------------------- - -// #define PACKET_SIZE 1500 // bytes -// #define ETH_DATA_RATE 1000000 // 1MB/s -// #define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s - -// static int timer_delta = MASTER_CLK_RATE/ETH_PACKET_RATE; // ticks between interrupts - -static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz - -static volatile bool send_packet_now = false; // timer handler sets this -static volatile bool link_is_up = false; // eth handler sets this - -int packet_number = 0; - -// ---------------------------------------------------------------- - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - link_is_up = true; - break; - - case 100: - v = LS_100; - link_is_up = true; - break; - - case 1000: - v = LS_100; - link_is_up = true; - break; - - default: - v = 0; - link_is_up = false; - break; - } - - hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - putstr("\neth link changed: speed = "); - puthex16_nl(speed); -} - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = 1; -} - - -void -buffer_irq_handler(unsigned irq) -{ - // FIXME -} - -static void -init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) -{ - int i = 0; - int mark = ((bufnum & 0xff) << 24) | 0x005A0000; - - for (i = 0; i < BP_NLINES; i++){ - buf[i] = mark | i; - mark ^= 0x00FF0000; - } - - // copy header into buffer - memcpy_wa(buf, pkt, sizeof(*pkt)); -} - -static void -init_packets(void) -{ - int i; - - u2_eth_packet_t pkt __attribute__((aligned (4))); - - for (i = 0; i < 6; i++){ - pkt.ehdr.dst.addr[i] = dst_mac_addr[i]; - } - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - - // fill ALL buffers for debugging - for (i = 0; i < 8; i++) - init_packet((void *)buffer_ram(i), &pkt, i); -} - -static int led_counter = 0; - -int -main(void) -{ - int send_pause = 1; - - u2_init(); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\ngen_eth_packets\n"); - - // Control LEDs - output_regs->leds = 0x00; - - init_packets(); - - // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now - pic_register_handler(IRQ_TIMER, timer_irq_handler); - hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - - ethernet_init(); - - eth_mac->pause_frame_send_en = 1; - eth_mac->pause_quanta_set = 16384 / 512; - - // eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 - - while(1){ - if (link_is_up && send_packet_now){ - send_packet_now = false; - - - if (send_pause) - eth_mac->xon_cpu = 1; - else - eth_mac->xon_cpu = 0; - - send_pause ^= 1; - - // kick off the next packet - // FIXME set packet number in packet - -#if 0 - bp_send_from_buf(0, PORT_ETH, 1, 0, 255); // 1KB total - - while ((buffer_pool_status->status & (BPS_DONE_0|BPS_ERROR_0)) == 0) - ; - bp_clear_buf(0); -#endif - - output_regs->leds = ((++led_counter) & 0x1) | (link_is_up ? 0x2 : 0x0); - } - } - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/hello.c b/firmware/microblaze/apps/hello.c deleted file mode 100644 index bce843093..000000000 --- a/firmware/microblaze/apps/hello.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "u2_init.h" -#include "stdio.h" - -int -main(void) -{ - u2_init(); - - puts("Hello World"); - puts("Goodbye World"); - - return 0; -} diff --git a/firmware/microblaze/apps/ibs_rx_test.c b/firmware/microblaze/apps/ibs_rx_test.c deleted file mode 100644 index bdc04747e..000000000 --- a/firmware/microblaze/apps/ibs_rx_test.c +++ /dev/null @@ -1,82 +0,0 @@ -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "nonstdio.h" - -#define PORT 2 // ethernet = 2, serdes = 0 -int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; -int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; - -int buffer_state[4]; - -static void __attribute__((unused)) -wait_until_status_nonzero(void) -{ - while (buffer_pool_status->status == 0) - ; -} - -int -main(void) -{ - int i; - - u2_init(); - - output_regs->adc_ctrl = 0x0A; - - dsp_rx_regs->freq = 0; - dsp_rx_regs->scale_iq = (1 << 16) | 1; - dsp_rx_regs->decim_rate = 8; - - volatile unsigned int *buffer0 = buffer_ram(0); - volatile unsigned int *buffer1 = buffer_ram(1); - volatile unsigned int *buffer2 = buffer_ram(2); - - putstr("Starting RX\n"); - bp_clear_buf(0); - bp_receive_to_buf(0, 1, 1, 0, 99); - - dsp_rx_regs->rx_command = (50 << 9) | 100; // Numlines, lines per frame - dsp_rx_regs->rx_time = 0x2000; - - dsp_rx_regs->rx_command = (137 << 9) | 50; // Numlines, lines per frame - dsp_rx_regs->rx_time = 0x2200; - - while (buffer_pool_status->status == 0) - ; - bp_clear_buf(0); - bp_clear_buf(1); - bp_receive_to_buf(1, 1, 1, 0, 99); - while (buffer_pool_status->status == 0) - ; - bp_clear_buf(2); - bp_receive_to_buf(2, 1, 1, 0, 99); - while (buffer_pool_status->status == 0) - ; - - for(i=0;i<100;i++) { - puthex(i); - putstr(" "); - puthex_nl(buffer0[i]); - } - for(i=0;i<60;i++) { - puthex(i); - putstr(" "); - puthex_nl(buffer1[i]); - } - for(i=0;i<60;i++) { - puthex(i); - putstr(" "); - puthex_nl(buffer2[i]); - } - //while(timer_regs -> time < 0x6000) - // {} - - putstr("Done\n"); - hal_finish(); - - return 1; -} diff --git a/firmware/microblaze/apps/ibs_tx_test.c b/firmware/microblaze/apps/ibs_tx_test.c deleted file mode 100644 index ff9446d92..000000000 --- a/firmware/microblaze/apps/ibs_tx_test.c +++ /dev/null @@ -1,160 +0,0 @@ -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "nonstdio.h" - -// Globals -#define EMPTY 0 -#define FILLING 1 -#define FULL 2 -#define EMPTYING 3 - -#define PORT 2 // ethernet = 2, serdes = 0 -int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; -int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; - -int buffer_state[4]; - -static void -wait_until_status_nonzero(void) -{ - while (buffer_pool_status->status == 0) - ; -} - -int -main(void) -{ - int i; - - u2_init(); - - dsp_tx_regs->freq = 0; - dsp_tx_regs->scale_iq = (1 << 16) | 1; - dsp_tx_regs->interp_rate = 8; - - // Write data to be sent into the first buffer - volatile unsigned int *buffer0 = buffer_ram(0); - volatile unsigned int *buffer1 = buffer_ram(1); - - - putstr("Starting to fill in RAM\n"); - for(i=0;i<512;i++) - buffer0[i] = i; - putstr("Filled in RAM\n"); - - buffer0[0] = 7; // start and end of buffer, send immediately - buffer0[1] = 0x0000; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - while(timer_regs -> time < 0x6000) - {} - - buffer0[0] = 3; // start and end of buffer - buffer0[1] = 0x8000; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - while(timer_regs -> time < 0x8400) - {} - - buffer0[0] = 3; // start and end of buffer - buffer0[1] = 0x8800; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - while(timer_regs -> time < 0x9000) - {} - - buffer0[0] = 0x2; // not last - buffer0[1] = 0x9100; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - buffer0[0] = 0x1; // last - buffer0[1] = 0x0000; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - - - buffer0[0] = 0x3; // first and last - buffer0[1] = 0x8000; // Time in the past - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - - /* - buffer0[0] = 0x2; // not last - buffer0[1] = 0x9600; // start time - bp_clear_buf(0); - bp_send_from_buf(0, 1, 1, 0, 9); - while (buffer_pool_status->status == 0) - ; - */ - - while(timer_regs -> time < 0xa000) - {} - - putstr("Done\n"); - - while(1) - {} - hal_finish(); - - // Send a bunch, let them pile up in FIFO - bp_send_from_buf(0, 2, 1, 21, 80); wait_until_status_nonzero(); - bp_clear_buf(0); - putstr("First add'l TX done\n"); - bp_send_from_buf(0, 2, 1, 81, 288); wait_until_status_nonzero(); - bp_clear_buf(0); - bp_send_from_buf(0, 2, 1, 289, 292); wait_until_status_nonzero(); - bp_clear_buf(0); - bp_send_from_buf(0, 2, 1, 293, 326); wait_until_status_nonzero(); - bp_clear_buf(0); - bp_send_from_buf(0, 2, 1, 327, 399); wait_until_status_nonzero(); - bp_clear_buf(0); - bp_send_from_buf(0, 2, 1, 400, 511); wait_until_status_nonzero(); - bp_clear_buf(0); - putstr("All add'l TX done\n"); - - bp_receive_to_buf(1, 2, 1, 21, 80); wait_until_status_nonzero(); - bp_clear_buf(1); - putstr("First add'l RX done\n"); - bp_receive_to_buf(1, 2, 1, 81, 288); wait_until_status_nonzero(); - bp_clear_buf(1); - bp_receive_to_buf(1, 2, 1, 289, 292); wait_until_status_nonzero(); - bp_clear_buf(1); - bp_receive_to_buf(1, 2, 1, 293, 326); wait_until_status_nonzero(); - bp_clear_buf(1); - bp_receive_to_buf(1, 2, 1, 327, 399); wait_until_status_nonzero(); - bp_clear_buf(1); - bp_receive_to_buf(1, 2, 1, 400, 511); wait_until_status_nonzero(); - bp_clear_buf(1); - putstr("All add'l RX done\n"); - - for(i=0;i<512;i++) - if(buffer0[i] != buffer1[i]) { - putstr("ERROR at location: "); - puthex_nl(i); - putstr("Value sent: "); - puthex_nl(buffer0[i]); - putstr("Value rcvd: "); - puthex_nl(buffer1[i]); - //break; - } - - putstr("Done Testing\n"); - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/mimo_app_common_v2.c b/firmware/microblaze/apps/mimo_app_common_v2.c deleted file mode 100644 index 5dbecb0d0..000000000 --- a/firmware/microblaze/apps/mimo_app_common_v2.c +++ /dev/null @@ -1,582 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "mimo_app_common_v2.h" -#include "buffer_pool.h" -#include "memcpy_wa.h" -#include "ethernet.h" -#include "nonstdio.h" -#include "print_rmon_regs.h" -#include "db.h" -#include "db_base.h" -#include "clocks.h" -#include "u2_init.h" -#include - -volatile bool link_is_up = false; // eth handler sets this -int cpu_tx_buf_dest_port = PORT_ETH; - -// If this is non-zero, this dbsm could be writing to the ethernet -dbsm_t *ac_could_be_sending_to_eth; - -static unsigned char exp_seqno __attribute__((unused)) = 0; - -void abort(void); - -static bool -burn_mac_addr(const op_burn_mac_addr_t *p) -{ - return ethernet_set_mac_addr(&p->addr); -} - -static bool -sync_to_pps(const op_generic_t *p) -{ - timesync_regs->sync_on_next_pps = 1; - putstr("SYNC to PPS\n"); - return true; -} - -static bool -config_mimo_cmd(const op_config_mimo_t *p) -{ - clocks_mimo_config(p->flags); - return true; -} - -void -set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt) -{ - reply_pkt->ehdr.dst = cmd_pkt->ehdr.src; - reply_pkt->ehdr.src = *ethernet_mac_addr(); - reply_pkt->ehdr.ethertype = U2_ETHERTYPE; - reply_pkt->thdr.flags = 0; - reply_pkt->thdr.fifo_status = 0; // written by protocol engine - reply_pkt->thdr.seqno = 0; // written by protocol engine - reply_pkt->thdr.ack = 0; // written by protocol engine - u2p_set_word0(&reply_pkt->fixed, 0, CONTROL_CHAN); - reply_pkt->fixed.timestamp = timer_regs->time; -} - -static void -send_reply(unsigned char *reply, size_t reply_len) -{ - if (reply_len < 64) - reply_len = 64; - - // wait for buffer to become idle - hal_set_leds(0x4, 0x4); - while((buffer_pool_status->status & BPS_IDLE(CPU_TX_BUF)) == 0) - ; - hal_set_leds(0x0, 0x4); - - // copy reply into CPU_TX_BUF - memcpy_wa(buffer_ram(CPU_TX_BUF), reply, reply_len); - - // wait until nobody else is sending to the ethernet - if (ac_could_be_sending_to_eth){ - hal_set_leds(0x8, 0x8); - dbsm_wait_for_opening(ac_could_be_sending_to_eth); - hal_set_leds(0x0, 0x8); - } - - if (0){ - printf("sending_reply to port %d, len = %d\n", cpu_tx_buf_dest_port, (int)reply_len); - print_buffer(buffer_ram(CPU_TX_BUF), reply_len/4); - } - - // fire it off - bp_send_from_buf(CPU_TX_BUF, cpu_tx_buf_dest_port, 1, 0, reply_len/4); - - // wait for it to complete (not long, it's a small pkt) - while((buffer_pool_status->status & (BPS_DONE(CPU_TX_BUF) | BPS_ERROR(CPU_TX_BUF))) == 0) - ; - - bp_clear_buf(CPU_TX_BUF); -} - - -static size_t -op_id_cmd(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_id_reply_t *r = (op_id_reply_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) // no room - return 0; - - // Build reply subpacket - - r->opcode = OP_ID_REPLY; - r->len = sizeof(op_id_reply_t); - r->rid = p->rid; - r->addr = *ethernet_mac_addr(); - r->hw_rev = (u2_hw_rev_major << 8) | u2_hw_rev_minor; - // r->fpga_md5sum = ; // FIXME - // r->sw_md5sum = ; // FIXME - - return r->len; -} - - -static size_t -config_tx_v2_cmd(const op_config_tx_v2_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_config_tx_reply_v2_t *r = (op_config_tx_reply_v2_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - struct tune_result tune_result; - memset(&tune_result, 0, sizeof(tune_result)); - - bool ok = true; - -#if 0 - if (p->valid & CFGV_GAIN){ - ok &= db_set_gain(tx_dboard, p->gain); - } - - if (p->valid & CFGV_FREQ){ - bool was_streaming = is_streaming(); - if (was_streaming) - stop_rx_cmd(); - - u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); - bool tune_ok = db_tune(tx_dboard, f, &tune_result); - ok &= tune_ok; - print_tune_result("Tx", tune_ok, f, &tune_result); - - if (was_streaming) - restart_streaming(); - } - - if (p->valid & CFGV_INTERP_DECIM){ - int interp = p->interp; - int hb1 = 0; - int hb2 = 0; - - if (!(interp & 1)){ - hb2 = 1; - interp = interp >> 1; - } - - if (!(interp & 1)){ - hb1 = 1; - interp = interp >> 1; - } - - if (interp < MIN_CIC_INTERP || interp > MAX_CIC_INTERP) - ok = false; - else { - dsp_tx_regs->interp_rate = (hb1<<9) | (hb2<<8) | interp; - // printf("Interp: %d, register %d\n", p->interp, (hb1<<9) | (hb2<<8) | interp); - } - } - - if (p->valid & CFGV_SCALE_IQ){ - dsp_tx_regs->scale_iq = p->scale_iq; - } -#endif - - // Build reply subpacket - - r->opcode = OP_CONFIG_TX_REPLY_V2; - r->len = sizeof(*r); - r->rid = p->rid; - r->ok = ok; - r->inverted = tune_result.inverted; - r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); - r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); - r->duc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); - r->duc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); - r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); - r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); - return r->len; -} - -static size_t -config_rx_v2_cmd(const op_config_rx_v2_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_config_rx_reply_v2_t *r = (op_config_rx_reply_v2_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - struct tune_result tune_result; - memset(&tune_result, 0, sizeof(tune_result)); - - bool ok = true; - - if (p->valid & CFGV_GAIN){ - ok &= db_set_gain(rx_dboard, p->gain); - } - - if (p->valid & CFGV_FREQ){ - bool was_streaming = is_streaming(); - if (was_streaming) - stop_rx_cmd(); - - u2_fxpt_freq_t f = u2_fxpt_freq_from_hilo(p->freq_hi, p->freq_lo); - bool tune_ok = db_tune(rx_dboard, f, &tune_result); - ok &= tune_ok; - print_tune_result("Rx", tune_ok, f, &tune_result); - - if (was_streaming) - restart_streaming(); - } - - if (p->valid & CFGV_INTERP_DECIM){ - int decim = p->decim; - int hb1 = 0; - int hb2 = 0; - - if(!(decim & 1)) { - hb2 = 1; - decim = decim >> 1; - } - - if(!(decim & 1)) { - hb1 = 1; - decim = decim >> 1; - } - - if (decim < MIN_CIC_DECIM || decim > MAX_CIC_DECIM) - ok = false; - else { - dsp_rx_regs->decim_rate = (hb1<<9) | (hb2<<8) | decim; - // printf("Decim: %d, register %d\n", p->decim, (hb1<<9) | (hb2<<8) | decim); - } - } - - if (p->valid & CFGV_SCALE_IQ){ - dsp_rx_regs->scale_iq = p->scale_iq; - } - - // Build reply subpacket - - r->opcode = OP_CONFIG_RX_REPLY_V2; - r->len = sizeof(*r); - r->rid = p->rid; - r->ok = ok; - r->inverted = tune_result.inverted; - r->baseband_freq_hi = u2_fxpt_freq_hi(tune_result.baseband_freq); - r->baseband_freq_lo = u2_fxpt_freq_lo(tune_result.baseband_freq); - r->ddc_freq_hi = u2_fxpt_freq_hi(tune_result.dxc_freq); - r->ddc_freq_lo = u2_fxpt_freq_lo(tune_result.dxc_freq); - r->residual_freq_hi = u2_fxpt_freq_hi(tune_result.residual_freq); - r->residual_freq_lo = u2_fxpt_freq_lo(tune_result.residual_freq); - - return r->len; -} - -static size_t -read_time_cmd(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_read_time_reply_t *r = (op_read_time_reply_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = OP_READ_TIME_REPLY; - r->len = sizeof(*r); - r->rid = p->rid; - r->time = timer_regs->time; - - return r->len; -} - -static void -fill_db_info(u2_db_info_t *p, const struct db_base *db) -{ - p->dbid = db->dbid; - p->freq_min_hi = u2_fxpt_freq_hi(db->freq_min); - p->freq_min_lo = u2_fxpt_freq_lo(db->freq_min); - p->freq_max_hi = u2_fxpt_freq_hi(db->freq_max); - p->freq_max_lo = u2_fxpt_freq_lo(db->freq_max); - p->gain_min = db->gain_min; - p->gain_max = db->gain_max; - p->gain_step_size = db->gain_step_size; -} - -static size_t -dboard_info_cmd(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_dboard_info_reply_t *r = (op_dboard_info_reply_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = OP_DBOARD_INFO_REPLY; - r->len = sizeof(*r); - r->rid = p->rid; - r->ok = true; - - fill_db_info(&r->tx_db_info, tx_dboard); - fill_db_info(&r->rx_db_info, rx_dboard); - - return r->len; -} - -static size_t -peek_cmd(const op_peek_t *p, - void *reply_payload, size_t reply_payload_space) -{ - op_generic_t *r = (op_generic_t *) reply_payload; - - putstr("peek: addr="); puthex32(p->addr); - printf(" bytes=%u\n", p->bytes); - - if ((reply_payload_space < (sizeof(*r) + p->bytes)) || - p->bytes > MAX_SUBPKT_LEN - sizeof(op_generic_t)) { - putstr("peek: insufficient reply packet space\n"); - return 0; // FIXME do partial read? - } - - r->opcode = OP_PEEK_REPLY; - r->len = sizeof(*r)+p->bytes; - r->rid = p->rid; - r->ok = true; - - memcpy_wa(reply_payload+sizeof(*r), (void *)p->addr, p->bytes); - - return r->len; -} - -static bool -poke_cmd(const op_poke_t *p) -{ - int bytes = p->len - sizeof(*p); - putstr("poke: addr="); puthex32(p->addr); - printf(" bytes=%u\n", bytes); - - uint8_t *src = (uint8_t *)p + sizeof(*p); - memcpy_wa((void *)p->addr, src, bytes); - - return true; -} - -static size_t -generic_reply(const op_generic_t *p, - void *reply_payload, size_t reply_payload_space, - bool ok) -{ - op_generic_t *r = (op_generic_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = p->opcode | OP_REPLY_BIT; - r->len = sizeof(*r); - r->rid = p->rid; - r->ok = ok; - - return r->len; -} - -static size_t -add_eop(void *reply_payload, size_t reply_payload_space) -{ - op_generic_t *r = (op_generic_t *) reply_payload; - if (reply_payload_space < sizeof(*r)) - return 0; // no room - - r->opcode = OP_EOP; - r->len = sizeof(*r); - r->rid = 0; - r->ok = 0; - - return r->len; -} - -void -handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len) -{ - unsigned char reply[sizeof(u2_eth_packet_t) + 4 * sizeof(u2_subpkt_t)] _AL4; - unsigned char *reply_payload = &reply[sizeof(u2_eth_packet_t)]; - int reply_payload_space = sizeof(reply) - sizeof(u2_eth_packet_t); - - // initialize reply - memset(reply, 0, sizeof(reply)); - set_reply_hdr((u2_eth_packet_t *) reply, pkt); - - // point to beginning of payload (subpackets) - unsigned char *payload = ((unsigned char *) pkt) + sizeof(u2_eth_packet_t); - int payload_len = len - sizeof(u2_eth_packet_t); - - size_t subpktlen = 0; - - while (payload_len >= sizeof(op_generic_t)){ - const op_generic_t *gp = (const op_generic_t *) payload; - subpktlen = 0; - - // printf("\nopcode = %d\n", gp->opcode); - - switch(gp->opcode){ - case OP_EOP: // end of subpackets - goto end_of_subpackets; - - case OP_ID: - subpktlen = op_id_cmd(gp, reply_payload, reply_payload_space); - break; - - case OP_CONFIG_TX_V2: - subpktlen = config_tx_v2_cmd((op_config_tx_v2_t *) payload, - reply_payload, reply_payload_space); - break; - - case OP_CONFIG_RX_V2: - subpktlen = config_rx_v2_cmd((op_config_rx_v2_t *) payload, - reply_payload, reply_payload_space); - break; - - case OP_START_RX_STREAMING: - start_rx_streaming_cmd(&pkt->ehdr.src, (op_start_rx_streaming_t *) payload); - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, true); - break; - - case OP_STOP_RX: - stop_rx_cmd(); - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, true); - break; - - case OP_BURN_MAC_ADDR: - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, - burn_mac_addr((op_burn_mac_addr_t *) payload)); - break; - - case OP_CONFIG_MIMO: - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, - config_mimo_cmd((op_config_mimo_t *) payload)); - break; - - case OP_READ_TIME: - subpktlen = read_time_cmd(gp, reply_payload, reply_payload_space); - break; - - case OP_DBOARD_INFO: - subpktlen = dboard_info_cmd(gp, reply_payload, reply_payload_space); - break; - - case OP_SYNC_TO_PPS: - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, - sync_to_pps((op_generic_t *) payload)); - break; - - case OP_PEEK: - subpktlen = peek_cmd((op_peek_t *)payload, reply_payload, reply_payload_space); - break; - - case OP_POKE: - subpktlen = generic_reply(gp, reply_payload, reply_payload_space, - poke_cmd((op_poke_t *)payload)); - break; - - default: - printf("app_common_v2: unhandled opcode = %d\n", gp->opcode); - break; - } - - int t = (gp->len + 3) & ~3; // bump to a multiple of 4 - payload += t; - payload_len -= t; - - subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 - reply_payload += subpktlen; - reply_payload_space -= subpktlen; - } - - end_of_subpackets: - - // add the EOP marker - subpktlen = add_eop(reply_payload, reply_payload_space); - subpktlen = (subpktlen + 3) & ~3; // bump to a multiple of 4 - reply_payload += subpktlen; - reply_payload_space -= subpktlen; - - send_reply(reply, reply_payload - reply); -} - - -/* - * Called when an ethernet packet is received. - * Return true if we handled it here, otherwise - * it'll be passed on to the DSP Tx pipe - */ -int -eth_pkt_inspector(bsm12_t *sm, int bufno) -{ - u2_eth_packet_t *pkt = (u2_eth_packet_t *) buffer_ram(bufno); - size_t byte_len = (buffer_pool_status->last_line[bufno] - 3) * 4; - - //static size_t last_len = 0; - - // hal_toggle_leds(0x1); - - // inspect rcvd frame and figure out what do do. - - if (pkt->ehdr.ethertype != U2_ETHERTYPE) - return true; // ignore, probably bogus PAUSE frame from MAC - - int chan = u2p_chan(&pkt->fixed); - - switch (chan){ - case CONTROL_CHAN: - handle_control_chan_frame(pkt, byte_len); - return -1; - break; - - case 0: - return 0; // pass it off to DSP TX - - case 1: - return 1; // pass it off to SERDES TX - - default: - abort(); - break; - } -} - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - link_is_up = speed != 0; - hal_set_leds(link_is_up ? LED_RJ45 : 0x0, LED_RJ45); - printf("\neth link changed: speed = %d\n", speed); -} - - -void -print_tune_result(char *msg, bool tune_ok, - u2_fxpt_freq_t target_freq, struct tune_result *r) -{ -#if 0 - printf("db_tune %s %s\n", msg, tune_ok ? "true" : "false"); - putstr(" target_freq "); print_fxpt_freq(target_freq); newline(); - putstr(" baseband_freq "); print_fxpt_freq(r->baseband_freq); newline(); - putstr(" dxc_freq "); print_fxpt_freq(r->dxc_freq); newline(); - putstr(" residual_freq "); print_fxpt_freq(r->residual_freq); newline(); - printf(" inverted %s\n", r->inverted ? "true" : "false"); -#endif -} diff --git a/firmware/microblaze/apps/mimo_app_common_v2.h b/firmware/microblaze/apps/mimo_app_common_v2.h deleted file mode 100644 index 1e62ced37..000000000 --- a/firmware/microblaze/apps/mimo_app_common_v2.h +++ /dev/null @@ -1,63 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef INCLUDED_APP_COMMON_H -#define INCLUDED_APP_COMMON_H - -#include -#include "usrp2_eth_packet.h" -#include "bsm12.h" -#include "memory_map.h" -#include "hal_io.h" -#include -#include - -#define CPU_TX_BUF 7 // cpu -> eth - -#define _AL4 __attribute__((aligned (4))) - -extern volatile bool link_is_up; // eth handler sets this - -// If there's a dbsm that sends to the ethernet, put it's address here -extern dbsm_t *ac_could_be_sending_to_eth; - -extern int cpu_tx_buf_dest_port; - -void set_reply_hdr(u2_eth_packet_t *reply_pkt, u2_eth_packet_t const *cmd_pkt); - -/* - * Called when an ethernet packet is received. - */ -int eth_pkt_inspector(bsm12_t *sm, int bufno); - - -void link_changed_callback(int speed); - -void -print_tune_result(char *msg, bool tune_ok, - u2_fxpt_freq_t target_freq, struct tune_result *r); - - -void start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p); -void stop_rx_cmd(void); -void restart_streaming(void); -bool is_streaming(void); - -void handle_control_chan_frame(u2_eth_packet_t *pkt, size_t len); - -#endif /* INCLUDED_APP_COMMON_H */ diff --git a/firmware/microblaze/apps/mimo_tx.c b/firmware/microblaze/apps/mimo_tx.c deleted file mode 100644 index e0f8aa6fa..000000000 --- a/firmware/microblaze/apps/mimo_tx.c +++ /dev/null @@ -1,363 +0,0 @@ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* - * This is a down and dirty test program that confirms that the we can - * coherently transmit different signals to two USRP2s connected via a - * mimo cable. This code runs in the USRP2 connected to the ethernet. - * The other USRP runs mimo_tx_slave. The host runs test_mimo_tx. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "bsm12.h" -#include "mimo_app_common_v2.h" -#include "memcpy_wa.h" -#include -#include -#include -#include "clocks.h" - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno; // used when f/w is filling in sequence numbers -#endif - - -/* - * Experimental code to transmit packets to DSP Tx and SERDES - * - * Hard wire the Tx config so we don't have to deal with control stuff yet. - */ - -#define BUF_BSM12_0 4 -#define BUF_BSM12_1 5 -#define BUF_BSM12_2 6 - -//#define CPU_TX_BUF 7 // cpu -> eth - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from ethernet -buf_cmd_args_t bsm12_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t bsm12_send0_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -// send to SERDES -buf_cmd_args_t bsm12_send1_args = { - PORT_SERDES, - 0, // starts just past transport header - 0 // filled in from last_line register -}; - -bsm12_t bsm12_sm; // the state machine - -#if 0 -/* - * ================================================================ - * configure DSP RX double buffering state machine (dsp -> eth) - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to ETH -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine -#endif - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// variables for streaming mode - -static bool streaming_p = false; -static unsigned int streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 1000 - -bool is_streaming(void){ return streaming_p; } - - -// ---------------------------------------------------------------- - - -void -restart_streaming(void) -{ -#if 0 - // setup RX DSP regs - dsp_rx_regs->clear_state = 1; // reset - - streaming_p = true; - streaming_frame_count = FRAMES_PER_CMD; - - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); // set "chain" bit - - // kick off the state machine - dbsm_start(&dsp_rx_sm); - - dsp_rx_regs->rx_time = 0; // enqueue first of two commands - - // make sure this one and the rest have the "now" and "chain" bits set. - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); - - dsp_rx_regs->rx_time = 0; // enqueue second command -#endif -} - -void -start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) -{ -#if 0 - host_mac_addr = *host; // remember who we're sending to - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, 0, 0); - // DSP RX will fill in timestamp - - memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); - - - if (FW_SETS_SEQNO) - fw_seqno = 0; - - streaming_items_per_frame = p->items_per_frame; - restart_streaming(); -#endif -} - - -void -stop_rx_cmd(void) -{ -#if 0 - streaming_p = false; - dsp_rx_regs->clear_state = 1; // flush cmd queue - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); -#endif -} - - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - - int tx_scale = 2500; - int interp = 8; // * 4 - - // setup some defaults - - dsp_tx_regs->freq = 429496730; // 10MHz - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; -} - - -#if 0 -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ -int -fw_sets_seqno_inspector(bsm12_t *sm, int buf_this) -{ - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; - - // queue up another rx command when required - if (streaming_p && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - dsp_rx_regs->rx_time = 0; - } - - return false; // we didn't handle the packet -} -#endif -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - bsm12_process_status(&bsm12_sm, status); -} - -int -main(void) -{ - u2_init(); - - putstr("\nMIMO Tx\n"); - print_mac_addr(ethernet_mac_addr()->addr); - newline(); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - - output_regs->debug_mux_ctrl = 1; -#if 0 - hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> DSP Tx - - bsm12_init(&bsm12_sm, BUF_BSM12_0, - &bsm12_recv_args, &bsm12_send0_args, &bsm12_send1_args, - eth_pkt_inspector); - - -#if 0 - // initialize double buffering state machine for DSP RX -> Ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; -#endif - - - // program tx registers - setup_tx(); - - // kick off the state machine - bsm12_start(&bsm12_sm); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - // dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - - if (pending & PIC_OVERRUN_INT){ - // dbsm_handle_rx_overrun(&dsp_rx_sm); - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - - if (streaming_p){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } - putchar('O'); - } - } -} diff --git a/firmware/microblaze/apps/mimo_tx_slave.c b/firmware/microblaze/apps/mimo_tx_slave.c deleted file mode 100644 index cdf9c03c2..000000000 --- a/firmware/microblaze/apps/mimo_tx_slave.c +++ /dev/null @@ -1,376 +0,0 @@ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* - * This is a down and dirty test program that confirms that the we can - * coherently transmit different signals to two USRP2s connected via a - * mimo cable. This code runs in the USRP2 NOT connected to the - * ethernet. The USRP connected to the ethernet runs mimo_tx. The - * host runs test_mimo_tx. - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include "clocks.h" -#include -#include -#include - - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno; // used when f/w is filling in sequence numbers -#endif - - -/* - * Full duplex Tx and Rx between serdes and DSP pipelines - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow - * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // dsp rx -> serdes (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> serdes -#define DSP_TX_BUF_0 4 // serdes -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // serdes -> dsp tx - -/* - * ================================================================== - * configure DSP TX double buffering state machine (serdes -> dsp) - * ================================================================== - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from serdes -buf_cmd_args_t dsp_tx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ================================================================= - * configure DSP RX double buffering state machine (dsp -> serdes) - * ================================================================= - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to serdes -buf_cmd_args_t dsp_rx_send_args = { - PORT_SERDES, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// variables for streaming mode - -static bool streaming_p = false; -static unsigned int streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 1000 - -bool is_streaming(void){ return streaming_p; } - -// ---------------------------------------------------------------- - - -void -restart_streaming(void) -{ - // setup RX DSP regs - dsp_rx_regs->clear_state = 1; // reset - - streaming_p = true; - streaming_frame_count = FRAMES_PER_CMD; - - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); // set "chain" bit - - // kick off the state machine - dbsm_start(&dsp_rx_sm); - - dsp_rx_regs->rx_time = 0; // enqueue first of two commands - - // make sure this one and the rest have the "now" and "chain" bits set. - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); - - dsp_rx_regs->rx_time = 0; // enqueue second command -} - -void -start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) -{ - host_mac_addr = *host; // remember who we're sending to - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, 0, 0); - // DSP RX will fill in timestamp - - memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); - - - if (FW_SETS_SEQNO) - fw_seqno = 0; - - streaming_items_per_frame = p->items_per_frame; - restart_streaming(); -} - - -void -stop_rx_cmd(void) -{ - streaming_p = false; - dsp_rx_regs->clear_state = 1; // flush cmd queue - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); -} - - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 2500; - int interp = 8; // * 4 - - // setup some defaults - - dsp_tx_regs->freq = 429496730; // 10MHz - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = (1 << 9) | (1 << 8) | interp; -} - - -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ -bool -fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false -{ - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; - - // queue up another rx command when required - if (streaming_p && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - dsp_rx_regs->rx_time = 0; - } - - return false; // we didn't handle the packet -} -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - // hal_toggle_leds(LED_A); - - uint32_t status = buffer_pool_status->status; - - if (0 && (status & ~BPS_IDLE_ALL)){ - putstr("status = "); - puthex32_nl(status); - } - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - -int -main(void) -{ - u2_init(); - - output_regs->led_src = 0x3; // h/w controls bottom two bits - clocks_enable_test_clk(true, 1); - - putstr("\nMIMO Tx Slave\n"); - - cpu_tx_buf_dest_port = PORT_SERDES; - - // ethernet_register_link_changed_callback(link_changed_callback); - // ethernet_init(); - - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - // puts("post clocks_mimo_config"); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - -#if 0 - output_regs->debug_mux_ctrl = 1; - hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); - hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - //output_regs->flush_icache = 1; - - // initialize double buffering state machine for DSP RX -> Ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // puts("post dbsm_init's"); - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; - - - // program tx registers - setup_tx(); - - // puts("post setup_tx"); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - // puts("post dbsm_start"); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - - if (pending & PIC_OVERRUN_INT){ - dbsm_handle_rx_overrun(&dsp_rx_sm); - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - - if (streaming_p){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } - putchar('O'); - } - } -} diff --git a/firmware/microblaze/apps/rcv_eth_packets.c b/firmware/microblaze/apps/rcv_eth_packets.c deleted file mode 100644 index 03fc94354..000000000 --- a/firmware/microblaze/apps/rcv_eth_packets.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "memcpy_wa.h" -#include -#include - - -// ---------------------------------------------------------------- - -static eth_mac_addr_t dst_mac_addr = - {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; - - -// ---------------------------------------------------------------- - -#define PACKET_SIZE 1500 // bytes -#define ETH_DATA_RATE 1000000 // 1MB/s -#define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s - -#define TIMER_RATE 100000000 // 100 MHz clock - -static int timer_delta = TIMER_RATE/ETH_PACKET_RATE; // ticks between interrupts - -static volatile bool send_packet_now = false; // timer handler sets this -static volatile bool link_is_up = false; // eth handler sets this - -int packet_number = 0; - -// ---------------------------------------------------------------- - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - link_is_up = true; - break; - - case 100: - v = LS_100; - link_is_up = true; - break; - - case 1000: - v = LS_100; - link_is_up = true; - break; - - default: - v = 0; - link_is_up = false; - break; - } - - //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - putstr("\neth link changed: speed = "); - puthex16_nl(speed); -} - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = 1; -} - - -void -buffer_irq_handler(unsigned irq) -{ - // FIXME -} - -static void -init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) -{ - int i = 0; - int mark = ((bufnum & 0xff) << 24) | 0x005A0000; - - for (i = 0; i < BP_NLINES; i++){ - buf[i] = mark | i; - mark ^= 0x00FF0000; - } - - // copy header into buffer - memcpy_wa(buf, pkt, sizeof(*pkt)); -} - -static void -init_packets(void) -{ - int i; - - u2_eth_packet_t pkt __attribute__((aligned (4))); - - pkt.ehdr.dst = dst_mac_addr; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - - // fill ALL buffers for debugging - for (i = 0; i < 8; i++) - init_packet((void *)buffer_ram(i), &pkt, i); -} - -int -main(void) -{ - u2_init(); - - int prev_leds = -1; - int new_leds = 0x00; - output_regs->leds = 0x00; - - int peak_hold_count = 0; - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\nrcv_eth_packets\n"); - - init_packets(); - - // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now - - // FIXME turn off timer since I don't think MTS and MFS instructions are implemented - // pic_register_handler(IRQ_TIMER, timer_irq_handler); - // hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - - ethernet_init(); - - //eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 - - // kick off a receive - bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); - - while(1){ - // u2_eth_packet_t pkt; - - new_leds = 0; - if (link_is_up) - new_leds = 0x2; - - if ((buffer_pool_status->status & (BPS_DONE_2|BPS_ERROR_2)) != 0){ - // we've got a packet! - -#if 0 - // copy to stack buffer so we can byte address it - memcpy_wa(&pkt, (void *)buffer_ram(2), sizeof(pkt)); - - putstr("Rx: src: "); - print_mac_addr(pkt.ehdr.dst_addr); - putstr(" dst: "); - print_mac_addr(pkt.ehdr.src_addr); - putstr(" ethtype: "); - puthex16(pkt.ehdr.ethertype); - putstr(" len: "); - int len = (buffer_pool_status->last_line[2] + 1) * 4; - puthex16_nl(len); -#else - volatile int *bp = buffer_ram(2); - int i; - for (i = 0; i < 16; i++){ - puthex8(i); - putchar(':'); - puthex32_nl(bp[i]); - } -#endif - - // kick off next receive - bp_clear_buf(2); - bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); - - peak_hold_count = 2048 * 10; - } - - if (peak_hold_count > 0){ - peak_hold_count--; - new_leds |= 0x1; - } - - if (new_leds != prev_leds){ - prev_leds = new_leds; - output_regs->leds = new_leds; - } - } - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/read_dbids.c b/firmware/microblaze/apps/read_dbids.c deleted file mode 100644 index 24c6d9ab4..000000000 --- a/firmware/microblaze/apps/read_dbids.c +++ /dev/null @@ -1,59 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include -#include -#include - - -int main(void) -{ - u2_init(); - - puts("\nread_dbids"); - - unsigned char dbid_tx[2]; - unsigned char dbid_rx[2]; - bool ok; - - ok = eeprom_read(I2C_ADDR_TX_A, 1, dbid_tx, 2); - if (!ok){ - puts("failed to read Tx Daugherboard EEPROM"); - } - else { - putstr("Tx Daugherboard ID: "); - puthex8(dbid_tx[1]); // MSB - puthex8(dbid_tx[0]); // LSB - newline(); - } - - ok = eeprom_read(I2C_ADDR_RX_A, 1, dbid_rx, 2); - if (!ok){ - puts("failed to read Rx Daugherboard EEPROM"); - } - else { - putstr("Rx Daugherboard ID: "); - puthex8(dbid_rx[1]); // MSB - puthex8(dbid_rx[0]); // LSB - newline(); - } - - return 0; -} diff --git a/firmware/microblaze/apps/sd_bounce.c b/firmware/microblaze/apps/sd_bounce.c deleted file mode 100644 index c1b48f170..000000000 --- a/firmware/microblaze/apps/sd_bounce.c +++ /dev/null @@ -1,153 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* - * Loopback SERDES to SERDES - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "nonstdio.h" -#include "memset_wa.h" -#include -#include -#include -#include -#include - - - -// ---------------------------------------------------------------- - -#define SERDES_RX_BUF_0 0 -#define SERDES_RX_BUF_1 1 - -/* - * ================================================================ - * configure SD RX double buffering state machine - * ================================================================ - */ - -// receive from SERDES -buf_cmd_args_t sd_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to SERDES -buf_cmd_args_t sd_send_args = { - PORT_SERDES, - 0, // starts with packet in line 0 - 0, // filled in from list_line register -}; - -dbsm_t sd_sm; // the state machine - - - - -// ---------------------------------------------------------------- - -#if 0 -static bool -check_packet(int *buf, int nlines) -{ - bool ok = true; - int i = 0; - for (i = 0; i < nlines; i++){ - int expected = ((2*i + 0) << 16) | (2*i+1); - if (buf[i] != expected){ - ok = false; - printf("buf[%d] = 0x%x expected = 0x%x\n", i, buf[i], expected); - } - } - return ok; -} - -static void -zero_buffer(int bufno) -{ - memset_wa(buffer_ram(bufno), 0, BP_NLINES * 4); -} -#endif - - -bool -sd_rx_inspector(dbsm_t *sm, int buf_this) -{ - hal_toggle_leds(0x2); - -#if 0 - int last_line = buffer_pool_status->last_line[buf_this]; - bool ok = check_packet(buffer_ram(buf_this), last_line); - static int good = 0; - static int bad = 0; - - if (ok) - good++; - else - bad++; - - if(good+bad == 10000) { - printf("Good %d\tBad %d\n",good,bad); - good = 0; - bad = 0; - } -#endif - - return false; -} - - -inline static void -buffer_irq_handler(void) -{ - uint32_t status = buffer_pool_status->status; - dbsm_process_status(&sd_sm, status); -} - - -int -main(void) -{ - u2_init(); - - putstr("\nsd_bounce\n"); - - // Get our clock from the mimo interface - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - dbsm_init(&sd_sm, SERDES_RX_BUF_0, - &sd_recv_args, &sd_send_args, - sd_rx_inspector); - - // kick off the state machine - dbsm_start(&sd_sm); - - while(1){ - buffer_irq_handler(); - } -} diff --git a/firmware/microblaze/apps/sd_gentest.c b/firmware/microblaze/apps/sd_gentest.c deleted file mode 100644 index 35e912615..000000000 --- a/firmware/microblaze/apps/sd_gentest.c +++ /dev/null @@ -1,269 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "nonstdio.h" -#include "memset_wa.h" -#include -#include -#include -#include -#include - -// ---------------------------------------------------------------- - -int packet_number = 0; -volatile bool send_packet_now = 0; - -#define SERDES_TX_BUF 0 -#define SERDES_RX_BUF 1 - - -#define NLINES_PER_PKT 380 - - -// ---------------------------------------------------------------- - -//static int timer_delta = (int)(MASTER_CLK_RATE * 100e-6); -static int timer_delta = 1000000; // .01 second - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = true; -} - - -static void -init_packet(int *buf) -{ - int i = 0; - for (i = 0; i < BP_NLINES; i++){ - buf[i] = ((2*i + 0) << 16) | (2*i+1); - } -} - -static bool -check_packet(int *buf, int nlines) -{ - bool ok = true; - int i = 0; - for (i = 0; i < nlines; i++){ - int expected = ((2*i + 0) << 16) | (2*i+1); - if (buf[i] != expected){ - ok = false; - printf("buf[%d] = 0x%x expected = 0x%x\n", i, buf[i], expected); - } - } - return ok; -} - -static void -zero_buffer(int bufno) -{ - memset_wa(buffer_ram(bufno), 0, BP_NLINES * 4); -} - -static void -init_packets(void) -{ - // init just the one we're using - init_packet(buffer_ram(SERDES_TX_BUF)); -} - -int -main(void) -{ - u2_init(); - - // We're free running and provide clock to the MIMO interface - clocks_mimo_config(MC_WE_DONT_LOCK | MC_PROVIDE_CLK_TO_MIMO); - - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - // output_regs->debug_mux_ctrl = 1; - // hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - // hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\nsd_gentest\n"); - - // Set up serdes (already enabled) - //output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN | SERDES_LOOPEN); - //output_regs->serdes_ctrl = (SERDES_ENABLE | SERDES_RXEN); - - init_packets(); - - // pic_register_handler(IRQ_TIMER, timer_irq_handler); - - //if (hwconfig_simulation_p()) - // timer_delta = sim_timer_delta; - - // start a receive from sd - zero_buffer(SERDES_RX_BUF); - bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); - - // fire off the first packet - bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); - hal_set_timeout(timer_delta); - int ready_to_send = 0; - - int counter __attribute__((unused)) = 0; - int sent = 1; - int txerr = 0; - int rxerr = 0; - int rcvd = 0; - int rxcrc = 0; - int sent_acc = 0; - int txerr_acc = 0; - int rxerr_acc = 0; - int rcvd_acc = 0; - int rxcrc_acc = 0; - -#define EXPECTING_PKT() ((counter & 0x1) == 0) -#define SEND_PKT() ((counter & 0x1) != 0) - - bool got_packet = false; - - while(1){ - uint32_t status = buffer_pool_status->status; - - if (status & (BPS_DONE(SERDES_RX_BUF))){ - bp_clear_buf(SERDES_RX_BUF); - got_packet = true; - - //hal_toggle_leds(0x2); - - // check packet - int last_line = buffer_pool_status->last_line[SERDES_RX_BUF]-1; - bool ok = check_packet(buffer_ram(SERDES_RX_BUF), last_line); - - if (ok) { - rcvd++; - //putchar('r'); - } - else { - rcvd++; - rxcrc++; - //putchar('P'); - } - // start a receive from sd - zero_buffer(SERDES_RX_BUF); - bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); - } - - if (status & (BPS_ERROR(SERDES_RX_BUF))){ - bp_clear_buf(SERDES_RX_BUF); - got_packet = true; - rcvd++; - rxerr++; - //putchar('E'); - - // start a receive from sd - zero_buffer(SERDES_RX_BUF); - bp_receive_to_buf(SERDES_RX_BUF, PORT_SERDES, 1, 0, BP_LAST_LINE); - } - - if (status & (BPS_DONE(SERDES_TX_BUF))){ - bp_clear_buf(SERDES_TX_BUF); - //putchar('t'); - bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); - //mdelay(1); - int i; - for (i = 0; i < 50; i++){ - asm volatile ("or r0, r0, r0\n\ - or r0, r0, r0\n \ - or r0, r0, r0\n \ - or r0, r0, r0\n \ - or r0, r0, r0\n \ - or r0, r0, r0\n \ - or r0, r0, r0\n"); - } - sent ++; - ready_to_send = 1; - //hal_toggle_leds(0x1); - } - - if (status & BPS_ERROR(SERDES_TX_BUF)){ - bp_clear_buf(SERDES_TX_BUF); - sent++; - txerr++; - ready_to_send = 1; - //putchar('X'); - } - - if(sent >=1000) { - printf("Status\tSENT %d\tTXERR %d\t",sent,txerr); - printf("RX %d\tERR %d\tCRC %d\tMISSED %d\n",rcvd, rxerr, rxcrc, sent-rcvd); - sent_acc += sent; sent = 0; - txerr_acc += txerr; txerr = 0; - rcvd_acc += rcvd; rcvd = 0; - rxerr_acc += rxerr; rxerr = 0; - rxcrc_acc += rxcrc; rxcrc = 0; - } - - if(sent_acc >=10000) { - printf("\nOverall\tSENT %d\tTXERR %d\t",sent_acc,txerr_acc); - printf("RX %d\tERR %d\tCRC %d\tMISSED %d\n\n",rcvd_acc, rxerr_acc, rxcrc_acc, sent_acc-rcvd_acc); - sent_acc = 0; - txerr_acc = 0; - rcvd_acc = 0; - rxerr_acc = 0; - rxcrc_acc = 0; - } -#if 0 - int pending = pic_regs->pending; - if (pending & PIC_TIMER_INT){ - hal_set_timeout(timer_delta); - - /* - if (EXPECTING_PKT()){ - if (!got_packet) - putchar('T'); - got_packet = false; - } - - if (SEND_PKT()){ - if (status & BPS_IDLE(SERDES_TX_BUF)) - bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); - } - counter++; - */ - - putchar('T'); - if(ready_to_send) { - bp_send_from_buf(SERDES_TX_BUF, PORT_SERDES, 1, 0, NLINES_PER_PKT); - counter++; - ready_to_send = 0; - } - - pic_regs->pending = PIC_TIMER_INT; // clear pending interrupt - } -#endif - } - - return 0; -} diff --git a/firmware/microblaze/apps/serdes_to_dsp.c b/firmware/microblaze/apps/serdes_to_dsp.c deleted file mode 100644 index 4994e0a69..000000000 --- a/firmware/microblaze/apps/serdes_to_dsp.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright 2007,2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common.h" -#include -#include -#include - - -/* - * This program can respond to queries from the host - * and stream rx samples. - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu -//#define CPU_TX_BUF 1 // cpu -> eth - -#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> eth -#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // eth -> dsp tx - -/* - * ================================================================ - * configure DSP TX double buffering state machine - * ================================================================ - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - - -// ---------------------------------------------------------------- - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -void -start_rx_cmd(const eth_mac_addr_t *host, op_start_rx_t *p) -{ -} - -void -stop_rx_cmd(void) -{ -} - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 256; - int interp = 32; - - op_config_tx_t def_config; - memset(&def_config, 0, sizeof(def_config)); - def_config.phase_inc = 408021893; // 9.5 MHz [2**32 * fc/fsample] - def_config.scale_iq = (tx_scale << 16) | tx_scale; - def_config.interp = interp; - - // setup Tx DSP regs - config_tx_cmd(&def_config); -} - - -inline static void -buffer_irq_handler(unsigned irq) -{ - //hal_toggle_leds(0x2); - - uint32_t status = buffer_pool_status->status; - - dbsm_process_status(&dsp_tx_sm, status); - - if (status & BPS_DONE(CPU_TX_BUF)){ - bp_clear_buf(CPU_TX_BUF); - } -} - -int -main(void) -{ - u2_init(); - - // Get our clock from the mimo interface - - clocks_enable_test_clk(true,1); - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\nserdes_to_dsp\n"); - - ethernet_register_link_changed_callback(link_changed_callback); - ethernet_init(); - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - // program tx registers - setup_tx(); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - while(1){ - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - } -} - diff --git a/firmware/microblaze/apps/serdes_txrx.c b/firmware/microblaze/apps/serdes_txrx.c deleted file mode 100644 index 2c47c9628..000000000 --- a/firmware/microblaze/apps/serdes_txrx.c +++ /dev/null @@ -1,368 +0,0 @@ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "dbsm.h" -#include "app_common_v2.h" -#include "memcpy_wa.h" -#include "clocks.h" -#include -#include -#include - - -#define FW_SETS_SEQNO 1 // define to 0 or 1 (FIXME must be 1 for now) - -#if (FW_SETS_SEQNO) -static int fw_seqno; // used when f/w is filling in sequence numbers -#endif - - -/* - * Full duplex Tx and Rx between serdes and DSP pipelines - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to serdes flow - * Buffers 4 and 5 are used to double-buffer the serdes to DSP Tx flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu - -#define DSP_RX_BUF_0 2 // dsp rx -> serdes (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> serdes -#define DSP_TX_BUF_0 4 // serdes -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // serdes -> dsp tx - -/* - * ================================================================== - * configure DSP TX double buffering state machine (serdes -> dsp) - * ================================================================== - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4) - -// Receive from serdes -buf_cmd_args_t dsp_tx_recv_args = { - PORT_SERDES, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past transport header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * ================================================================= - * configure DSP RX double buffering state machine (dsp -> serdes) - * ================================================================= - */ - -// 4 lines of ethernet hdr + 1 line transport hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE ((sizeof(u2_eth_hdr_t) + sizeof(u2_transport_hdr_t))/4 + 1) - -// receive from DSP -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to serdes -buf_cmd_args_t dsp_rx_send_args = { - PORT_SERDES, - 0, // starts with ethernet header in line 0 - 0, // filled in from list_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -// variables for streaming mode - -static bool streaming_p = false; -static unsigned int streaming_items_per_frame = 0; -static int streaming_frame_count = 0; -#define FRAMES_PER_CMD 1000 - -bool is_streaming(void){ return streaming_p; } - -// ---------------------------------------------------------------- - - -void -restart_streaming(void) -{ - // setup RX DSP regs - dsp_rx_regs->clear_state = 1; // reset - - streaming_p = true; - streaming_frame_count = FRAMES_PER_CMD; - - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); // set "chain" bit - - // kick off the state machine - dbsm_start(&dsp_rx_sm); - - dsp_rx_regs->rx_time = 0; // enqueue first of two commands - - // make sure this one and the rest have the "now" and "chain" bits set. - dsp_rx_regs->rx_command = - MK_RX_CMD(FRAMES_PER_CMD * streaming_items_per_frame, - streaming_items_per_frame, - 1, 1); - - dsp_rx_regs->rx_time = 0; // enqueue second command -} - -void -start_rx_streaming_cmd(const eth_mac_addr_t *host, op_start_rx_streaming_t *p) -{ - host_mac_addr = *host; // remember who we're sending to - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, 0, 0); - // DSP RX will fill in timestamp - - memcpy_wa(buffer_ram(DSP_RX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_RX_BUF_1), &pkt, sizeof(pkt)); - - - if (FW_SETS_SEQNO) - fw_seqno = 0; - - streaming_items_per_frame = p->items_per_frame; - restart_streaming(); -} - - -void -stop_rx_cmd(void) -{ - streaming_p = false; - dsp_rx_regs->clear_state = 1; // flush cmd queue - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); -} - - -static void -setup_tx() -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - - int tx_scale = 256; - int interp = 32; - - // setup some defaults - - dsp_tx_regs->freq = 0; - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = interp; -} - - -#if (FW_SETS_SEQNO) -/* - * Debugging ONLY. This will be handled by the tx_protocol_engine. - * - * This is called when the DSP Rx chain has filled in a packet. - * We set and increment the seqno, then return false, indicating - * that we didn't handle the packet. A bit of a kludge - * but it should work. - */ -bool -fw_sets_seqno_inspector(dbsm_t *sm, int buf_this) // returns false -{ - uint32_t *p = buffer_ram(buf_this); - uint32_t seqno = fw_seqno++; - - // KLUDGE all kinds of nasty magic numbers and embedded knowledge - uint32_t t = p[4]; - t = (t & 0xffff00ff) | ((seqno & 0xff) << 8); - p[4] = t; - - // queue up another rx command when required - if (streaming_p && --streaming_frame_count == 0){ - streaming_frame_count = FRAMES_PER_CMD; - dsp_rx_regs->rx_time = 0; - } - - return false; // we didn't handle the packet -} -#endif - - -inline static void -buffer_irq_handler(unsigned irq) -{ - // hal_toggle_leds(LED_A); - - uint32_t status = buffer_pool_status->status; - - if (0 && (status & ~BPS_IDLE_ALL)){ - putstr("status = "); - puthex32_nl(status); - } - - dbsm_process_status(&dsp_tx_sm, status); - dbsm_process_status(&dsp_rx_sm, status); -} - -int -main(void) -{ - u2_init(); - - output_regs->led_src = 0x3; // h/w controls bottom two bits - clocks_enable_test_clk(true, 1); - - putstr("\nSERDES TxRx\n"); - - cpu_tx_buf_dest_port = PORT_SERDES; - - // ethernet_register_link_changed_callback(link_changed_callback); - // ethernet_init(); - - clocks_mimo_config(MC_WE_LOCK_TO_MIMO); - - // puts("post clocks_mimo_config"); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - -#if 0 - output_regs->debug_mux_ctrl = 1; - hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); - hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - - // initialize double buffering state machine for ethernet -> DSP Tx - - dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, - &dsp_tx_recv_args, &dsp_tx_send_args, - eth_pkt_inspector); - - - //output_regs->flush_icache = 1; - - // initialize double buffering state machine for DSP RX -> Ethernet - - if (FW_SETS_SEQNO){ - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - fw_sets_seqno_inspector); - } - else { - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - } - - // puts("post dbsm_init's"); - - // tell app_common that this dbsm could be sending to the ethernet - ac_could_be_sending_to_eth = &dsp_rx_sm; - - - // program tx registers - setup_tx(); - - // puts("post setup_tx"); - - // kick off the state machine - dbsm_start(&dsp_tx_sm); - - // puts("post dbsm_start"); - - //int which = 0; - - while(1){ - // hal_gpio_write(GPIO_TX_BANK, which, 0x8000); - // which ^= 0x8000; - - buffer_irq_handler(0); - - int pending = pic_regs->pending; // poll for under or overrun - - if (pending & PIC_UNDERRUN_INT){ - dbsm_handle_tx_underrun(&dsp_tx_sm); - pic_regs->pending = PIC_UNDERRUN_INT; // clear interrupt - putchar('U'); - } - - if (pending & PIC_OVERRUN_INT){ - dbsm_handle_rx_overrun(&dsp_rx_sm); - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt - - // FIXME Figure out how to handle this robustly. - // Any buffers that are emptying should be allowed to drain... - - if (streaming_p){ - // restart_streaming(); - // FIXME report error - } - else { - // FIXME report error - } - putchar('O'); - } - } -} diff --git a/firmware/microblaze/apps/set_hw_rev.c b/firmware/microblaze/apps/set_hw_rev.c deleted file mode 100644 index d4ac8ff81..000000000 --- a/firmware/microblaze/apps/set_hw_rev.c +++ /dev/null @@ -1,45 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include -#include -#include -#include - -#define HW_REV_MAJOR 0 -#define HW_REV_MINOR 3 - -int -main(void) -{ - u2_init(); - - putstr("\nset_hw_rev\n"); - - bool ok = true; - unsigned char maj = HW_REV_MAJOR; - unsigned char min = HW_REV_MINOR; - ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &maj, 1); - ok &= eeprom_write(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &min, 1); - - if (ok) - printf("OK: set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - else - printf("FAILED to set h/w rev to %d.%d\n", HW_REV_MAJOR, HW_REV_MINOR); - - return 0; -} diff --git a/firmware/microblaze/apps/test1.c b/firmware/microblaze/apps/test1.c deleted file mode 100644 index c3cc3be56..000000000 --- a/firmware/microblaze/apps/test1.c +++ /dev/null @@ -1,282 +0,0 @@ -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include "nonstdio.h" - -// Globals -#define EMPTY 0 -#define FILLING 1 -#define FULL 2 -#define EMPTYING 3 - -#define PORT 2 // ethernet = 2, serdes = 0 -int dsp_rx_buf, dsp_tx_buf, serdes_rx_buf, serdes_tx_buf; -int dsp_rx_idle, dsp_tx_idle, serdes_rx_idle, serdes_tx_idle; - -int buffer_state[4]; - - -void double_buffering(int port); - -// -// We register this in the secondary interrupt vector. -// It's called on buffer manager interrupts -// -void -buffer_irq_handler(unsigned irq) -{ - double_buffering(PORT); -} - -int -main(void) -{ - int i; - - u2_init(); - - // Control LEDs - output_regs->leds = 0x02; - - // Turn on ADCs - output_regs->adc_ctrl = 0x0A; - - // Set up TX Chain - dsp_tx_regs->freq = 0; - dsp_tx_regs->scale_iq = (1 << 16) | 1; - dsp_tx_regs->interp_rate = 8; - - // Set up RX Chain - dsp_rx_regs->freq = 0; - dsp_rx_regs->scale_iq = (1 << 16) | 1; - dsp_rx_regs->decim_rate = 8; - - // Set up buffer control, using only 4 for now - for(i=0;i<4;i++) - buffer_state[i] = EMPTY; - - // Set up DSP RX - buffer_state[0] = FILLING; - serdes_tx_idle = 1; - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines - - //dsp_rx_regs->run_rx = 1; // Start DSP_RX - putstr("Done DSP RX setup\n"); - - // Set up serdes RX - buffer_state[2] = FILLING; - dsp_tx_idle = 1; - bp_receive_to_buf(2, PORT, 1, 5, 504); - - while (buffer_pool_status->status == 0) // wait for completion of DSP RX - ; - - putstr("Done DSP TX setup\n"); - //dsp_tx_regs->run_tx = 1; - - // register interrupt handler - pic_register_handler(IRQ_BUFFER, buffer_irq_handler); - - while (1) - ; - - hal_finish(); - return 1; -} - -void -double_buffering(int port) { - unsigned int localstatus = buffer_pool_status->status; - - if(localstatus & BPS_DONE_0) { - bp_clear_buf(0); - if(buffer_state[0] == FILLING) { - buffer_state[0] = FULL; - if(buffer_state[1] == EMPTY) { - bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[1] = FILLING; - } - else - dsp_rx_idle = 1; - if(serdes_tx_idle) { - serdes_tx_idle = 0; - bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 - buffer_state[0] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[0] = EMPTY; - if(dsp_rx_idle) { - dsp_rx_idle = 0; - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 0, use 500 lines - buffer_state[0] = FILLING; - } - if(buffer_state[1] == FULL) { - bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 - buffer_state[1] = EMPTYING; - } - else - serdes_tx_idle = 1; - } - putstr("Int Proc'ed 0\n"); - } - if(localstatus & BPS_DONE_1) { - bp_clear_buf(1); - if(buffer_state[1] == FILLING) { - buffer_state[1] = FULL; - if(buffer_state[0] == EMPTY) { - bp_receive_to_buf(0, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[0] = FILLING; - } - else - dsp_rx_idle = 1; - if(serdes_tx_idle) { - serdes_tx_idle = 0; - bp_send_from_buf(1, port, 1, 10, 509); // SERDES_TX from buffer 1 - buffer_state[1] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[1] = EMPTY; - if(dsp_rx_idle) { - dsp_rx_idle = 0; - bp_receive_to_buf(1, 1, 1, 10, 509); // DSP_RX to buffer 1, use 500 lines - buffer_state[1] = FILLING; - } - if(buffer_state[0] == FULL) { - bp_send_from_buf(0, port, 1, 10, 509); // SERDES_TX from buffer 0 - buffer_state[0] = EMPTYING; - } - else - serdes_tx_idle = 1; - } - putstr("Int Proc'ed 1\n"); - } - if(localstatus & BPS_DONE_2) { - bp_clear_buf(2); - if(buffer_state[2] == FILLING) { - buffer_state[2] = FULL; - if(buffer_state[3] == EMPTY) { - bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3, use 500 lines - buffer_state[3] = FILLING; - } - else - serdes_rx_idle = 1; - if(dsp_tx_idle) { - dsp_tx_idle = 0; - bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 - buffer_state[2] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[2] = EMPTY; - if(serdes_rx_idle) { - serdes_rx_idle = 0; - bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2 - buffer_state[2] = FILLING; - } - if(buffer_state[3] == FULL) { - bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 - buffer_state[3] = EMPTYING; - } - else - dsp_tx_idle = 1; - } - putstr("Int Proc'ed 2\n"); - } - if(localstatus & BPS_DONE_3) { - bp_clear_buf(3); - if(buffer_state[3] == FILLING) { - buffer_state[3] = FULL; - if(buffer_state[2] == EMPTY) { - bp_receive_to_buf(2, port, 1, 5, 504); // SERDES_RX to buffer 2, use 500 lines - buffer_state[2] = FILLING; - } - else - serdes_rx_idle = 1; - if(dsp_tx_idle) { - dsp_tx_idle = 0; - bp_send_from_buf(3, 1, 1, 5, 504); // DSP_TX from buffer 3 - buffer_state[3] = EMPTYING; - } - } - else { // buffer was emptying - buffer_state[3] = EMPTY; - if(serdes_rx_idle) { - serdes_rx_idle = 0; - bp_receive_to_buf(3, port, 1, 5, 504); // SERDES_RX to buffer 3 - buffer_state[3] = FILLING; - } - if(buffer_state[2] == FULL) { - bp_send_from_buf(2, 1, 1, 5, 504); // DSP_TX from buffer 2 - buffer_state[2] = EMPTYING; - } - else - dsp_tx_idle = 1; - } - putstr("Int Proc'ed 3\n"); - } -} - -// Spare Code - -#if 0 - // Set up LSDAC - int i = 0; - while(1) { - int command = (3 << 19) | (0 << 16) | (i & 0xffff); - spi_transact(SPI_TXONLY, SPI_SS_TX_DAC, command, 24, 1); // negate TX phase - i++; - } -#endif - -#if 0 - // Write to buffer 0 - int *buf = (int *)(BUFFER_BASE + BUFFER_0); - puthex_nl((int)buf); - - for(i=0;i. - */ - -#include -#include -#include -#include - -int -main(void) -{ - u2_init(); - - puts("\ntest_db_spi"); - - while(1){ - spi_transact(SPI_TXONLY, SPI_SS_RX_DB, 0xCC33, 16, SPIF_PUSH_FALL); - spi_transact(SPI_TXONLY, SPI_SS_TX_DB, 0x33CC, 16, SPIF_PUSH_FALL); - } -} diff --git a/firmware/microblaze/apps/test_i2c.c b/firmware/microblaze/apps/test_i2c.c deleted file mode 100644 index f349ead88..000000000 --- a/firmware/microblaze/apps/test_i2c.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include /* FIXME */ -#include -#include -#include -#include - - - -#define ASSERT_TRUE(x) \ - do { \ - if (!(x)){ \ - printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - -#define ASSERT_FALSE(x) \ - do { \ - if (x){ \ - printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - - -#define BUFSIZE 128 - -int -main(void) -{ - int i; - bool ok; - int nerrors = 0; - uint8_t buf[BUFSIZE]; - int not_dev_addr = 0x35; // no device with this address on the i2c bus. - int offset; - int len; - - u2_init(); - - puts("test_i2c\n"); - - // try writing a non-existent device - buf[0] = 0xA5; - ok = i2c_write(not_dev_addr, buf, 1); - ASSERT_FALSE(ok); - - // try read from non-existent device - buf[0] = 0; - ok = i2c_read(not_dev_addr, buf, 1); - ASSERT_FALSE(ok); - - // try writing eeprom - offset = 31; - len = 8; - memset(buf, 0, sizeof(buf)); - for (i = 0; i < len; i++) - buf[i] = i; - ok = eeprom_write(I2C_ADDR_MBOARD, offset, buf, len); - ASSERT_TRUE(ok); - - // now try to read it back - offset = 31; - len = 8; - memset(buf, 0, sizeof(buf)); - ok = eeprom_read(I2C_ADDR_MBOARD, offset, buf, len); - ASSERT_TRUE(ok); - - // check result - for (i = 0; i < len; i++){ - if (buf[i] != i){ - printf("buf[%d] = %d, should be %d\n", i, buf[i], i); - nerrors++; - } - } - - if (nerrors == 0){ - output_regs->leds = 0x3; - puts("PASSED\n"); - } - else { - output_regs->leds = 0x0; - puts("FAILED\n"); - } - - hal_finish(); - return 0; -} - diff --git a/firmware/microblaze/apps/test_lsadc.c b/firmware/microblaze/apps/test_lsadc.c deleted file mode 100644 index 5fda29cd7..000000000 --- a/firmware/microblaze/apps/test_lsadc.c +++ /dev/null @@ -1,57 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include -#include -#include - -int -main(void) -{ - u2_init(); - - puts("\ntest_lsadc"); - - uint32_t r; - - unsigned int up_counter = 0; - - while (1){ - unsigned int v; - v = up_counter; - - lsdac_write_rx(0, v << 0); - lsdac_write_rx(2, v << 1); - -#if 1 - r = lsadc_read_rx(0); - lsdac_write_rx(1, r & 0x0fff); - //puthex32_nl(r); -#endif - -#if 1 - r = lsadc_read_rx(1); - lsdac_write_rx(3, r & 0x0fff); - //puthex32_nl(r); -#endif - - up_counter++; - } -} diff --git a/firmware/microblaze/apps/test_lsdac.c b/firmware/microblaze/apps/test_lsdac.c deleted file mode 100644 index 8c1bf333b..000000000 --- a/firmware/microblaze/apps/test_lsdac.c +++ /dev/null @@ -1,51 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include -#include - -int -main(void) -{ - u2_init(); - - puts("\ntest_lsdac"); - - unsigned int up_counter = 0; - unsigned int dn_counter = 0; - - while(1){ - unsigned int v; - v = up_counter; - lsdac_write_rx(0, v << 0); - lsdac_write_rx(1, v << 1); - lsdac_write_rx(2, v << 2); - lsdac_write_rx(3, v << 3); - - v = up_counter; - lsdac_write_tx(0, v << 0); - lsdac_write_tx(1, v << 1); - lsdac_write_tx(2, v << 2); - lsdac_write_tx(3, v << 3); - - up_counter++; - dn_counter--; - } -} diff --git a/firmware/microblaze/apps/test_phy_comm.c b/firmware/microblaze/apps/test_phy_comm.c deleted file mode 100644 index d312ca4cc..000000000 --- a/firmware/microblaze/apps/test_phy_comm.c +++ /dev/null @@ -1,113 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -// check communication with ethernet PHY chip - -#include "u2_init.h" -#include "memory_map.h" -#include "hal_io.h" -#include "ethernet.h" -#include "pic.h" -#include "nonstdio.h" - - -#define DELTA_T 12500000 // .125s (10ns per tick) -//#define DELTA_T 10000 - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - - - -#define U2_ETHERTYPE 0xBEEF - - -static volatile int led_link_up_flag = 0; - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - led_link_up_flag = 0x2; - break; - - case 100: - v = LS_100; - led_link_up_flag = 0x2; - break; - - case 1000: - v = LS_100; - led_link_up_flag = 0x2; - break; - - default: - v = 0; - led_link_up_flag = 0; - break; - } - - //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - putstr("\neth link changed: speed = "); - puthex_nl(speed); -} - -void -timer_handler(unsigned irq) -{ - static int led_counter = 0; - - hal_set_timeout(DELTA_T); // schedule next timeout - output_regs->leds = (led_counter++ & 0x1) | led_link_up_flag; -} - -int -main(void) -{ - u2_init(); - - putstr("\n test_phy_comm\n"); - - pic_register_handler(IRQ_ONETIME, timer_handler); - hal_set_timeout(DELTA_T); // schedule timeout - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - ethernet_register_link_changed_callback(link_changed_callback); - - output_regs->phy_ctrl = 1; /* reset the eth PHY */ - output_regs->phy_ctrl = 0; - - ethernet_init(); - - while(1) - ; - - return 0; -} diff --git a/firmware/microblaze/apps/test_ram.c b/firmware/microblaze/apps/test_ram.c deleted file mode 100644 index 77ee693f6..000000000 --- a/firmware/microblaze/apps/test_ram.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include /* FIXME */ -#include -#include -#include -#include -#include - -#define ASSERT_TRUE(x) \ - do { \ - if (!(x)){ \ - printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - -#define ASSERT_FALSE(x) \ - do { \ - if (x){ \ - printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - - -#define BUFSIZE 128 - -int test_ram() -{ - int i,j,k; - output_regs->ram_page = 1<<10; - - extram[0] = 0xDEADBEEF; - extram[1] = 0xF00D1234; - extram[7] = 0x76543210; - - output_regs->ram_page = 2<<10; - extram[7] = 0x55555555; - extram[1] = 0xaaaaaaaa; - extram[0] = 0xeeeeeeee; - - output_regs->ram_page = 1<<10; - - i = extram[0]; - k = extram[1]; - j = extram[7]; - - if((i != 0xDEADBEEF)||(j!=0x76543210)||(k!=0xF00D1234)) { - puts("RAM FAIL1!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - - output_regs->ram_page = 2<<10; - - j = extram[7]; - k = extram[1]; - i = extram[0]; - - if((i != 0xeeeeeeee)||(j!=0x55555555)||(k!=0xaaaaaaaa)) { - puts("RAM FAIL2!\n"); - puthex32_nl(i); - puthex32_nl(j); - puthex32_nl(k); - return 0; - } - return 1; -} - -int -main(void) -{ - - u2_init(); - puts("\ntest_ram\n"); - int success = test_ram(); - if(success) - puts("RAM Passed Tests\n"); - else - puts("RAM Failed\n"); - - hal_finish(); - return 0; -} - diff --git a/firmware/microblaze/apps/test_sd.c b/firmware/microblaze/apps/test_sd.c deleted file mode 100644 index 494432d7f..000000000 --- a/firmware/microblaze/apps/test_sd.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include -#include -#include /* FIXME */ -#include -#include -#include -#include - - -#define ASSERT_TRUE(x) \ - do { \ - if (!(x)){ \ - printf("ASSERT_TRUE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - -#define ASSERT_FALSE(x) \ - do { \ - if (x){ \ - printf("ASSERT_FALSE failed on line %d\n", __LINE__); \ - nerrors++; \ - } \ - } while(0) - - -#define BUFSIZE 128 - -int -main(void) -{ - int i; - unsigned char buf[512]; - - u2_init(); - - puts("\ntest_sd\n"); - - - i = sd_init(); - if(i) - puts("Successfully Init'ed Card\n"); - else - puts("FAILED INIT of Card\n"); - - i = sd_read_block(2048,buf); - if(i) { - puts("READ Command accepted\n"); - for(i=0;i<512;i++) - if((i&15) == 15) - puthex8_nl(buf[i]); - else { - puthex8(buf[i]); - putchar(' '); - } - } - else - puts("READ Command Rejected\n"); - - puts("Done"); - hal_finish(); - return 0; -} - diff --git a/firmware/microblaze/apps/timer_test.c b/firmware/microblaze/apps/timer_test.c deleted file mode 100644 index 44e80b5f1..000000000 --- a/firmware/microblaze/apps/timer_test.c +++ /dev/null @@ -1,57 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "u2_init.h" -#include "memory_map.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include "nonstdio.h" -#include "hal_io.h" - -#define DELTA_T 500 // 5 us (10ns per tick) - - -void -timer_handler(unsigned irq) -{ - hal_set_timeout(DELTA_T); - - putstr("Tick: "); - puthex_nl(0); -} - -int -main(void) -{ - u2_init(); - - // setup timer - - putstr("Setting up timer\n"); - pic_register_handler(IRQ_ONETIME, timer_handler); - - hal_set_timeout(DELTA_T); - - while (1) - ; - - putstr("Done Testing\n"); - - hal_finish(); - return 1; -} diff --git a/firmware/microblaze/apps/tx_standalone.c b/firmware/microblaze/apps/tx_standalone.c deleted file mode 100644 index 1645fa8ba..000000000 --- a/firmware/microblaze/apps/tx_standalone.c +++ /dev/null @@ -1,339 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif - -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "memcpy_wa.h" -#include "dbsm.h" -#include -#include -#include - -#define _AL4 __attribute__((aligned (4))) - -#define USE_BUFFER_INTERRUPT 0 // 0 or 1 - - -static int timer_delta = MASTER_CLK_RATE/1000; // tick at 1kHz - -/* - * This program can respond to queries from the host - * and stream rx samples. - * - * Buffer 1 is used by the cpu to send frames to the host. - * Buffers 2 and 3 are used to double-buffer the DSP Rx to eth flow - * Buffers 4 and 5 are used to double-buffer the eth to DSP Tx eth flow - */ -//#define CPU_RX_BUF 0 // eth -> cpu -#define CPU_TX_BUF 1 // cpu -> eth - -#define DSP_RX_BUF_0 2 // dsp rx -> eth (double buffer) -#define DSP_RX_BUF_1 3 // dsp rx -> eth -#define DSP_TX_BUF_0 4 // eth -> dsp tx (double buffer) -#define DSP_TX_BUF_1 5 // eth -> dsp tx - - -/* - * ================================================================ - * configure DSP RX double buffering state machine - * ================================================================ - */ - - -// 4 lines of ethernet hdr + 1 line (word0) -// DSP Rx writes timestamp followed by nlines_per_frame of samples -#define DSP_RX_FIRST_LINE 5 -#define DSP_RX_SAMPLES_PER_FRAME 128 -#define DSP_RX_EXTRA_LINES 1 // writes timestamp - -// Receive from DSP Rx -buf_cmd_args_t dsp_rx_recv_args = { - PORT_DSP, - DSP_RX_FIRST_LINE, - BP_LAST_LINE -}; - -// send to ethernet -buf_cmd_args_t dsp_rx_send_args = { - PORT_ETH, - 0, // starts with ethernet header in line 0 - 0, // filled in from last_line register -}; - -dbsm_t dsp_rx_sm; // the state machine - -/* - * ================================================================ - * configure DSP TX double buffering state machine - * ================================================================ - */ - -// 4 lines of ethernet hdr + 2 lines (word0 + timestamp) -// DSP Tx reads word0 (flags) + timestamp followed by samples - -#define DSP_TX_FIRST_LINE 4 -#define DSP_TX_SAMPLES_PER_FRAME 250 // not used except w/ debugging -#define DSP_TX_EXTRA_LINES 2 // reads word0 + timestamp - -// Receive from ethernet -buf_cmd_args_t dsp_tx_recv_args = { - PORT_ETH, - 0, - BP_LAST_LINE -}; - -// send to DSP Tx -buf_cmd_args_t dsp_tx_send_args = { - PORT_DSP, - DSP_TX_FIRST_LINE, // starts just past ethernet header - 0 // filled in from last_line register -}; - -dbsm_t dsp_tx_sm; // the state machine - -/* - * send constant buffer to DSP TX - */ -static inline void -SEND_CONST_TO_DSP_TX(void) -{ - bp_send_from_buf(DSP_TX_BUF_0, PORT_DSP, 1, - DSP_TX_FIRST_LINE, - DSP_TX_FIRST_LINE + DSP_TX_EXTRA_LINES + DSP_TX_SAMPLES_PER_FRAME - 1); -} - -// ---------------------------------------------------------------- - - - -// The mac address of the host we're sending to. -eth_mac_addr_t host_mac_addr; - - -void link_changed_callback(int speed); -static volatile bool link_is_up = false; // eth handler sets this - - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout -} - -// Tx DSP underrun -void -underrun_irq_handler(unsigned irq) -{ - dsp_tx_regs->clear_state = 1; - bp_clear_buf(DSP_TX_BUF_0); - bp_clear_buf(DSP_TX_BUF_1); - dbsm_stop(&dsp_tx_sm); - - // FIXME anything else? - - putstr("\nirq: underrun\n"); -} - -// Rx DSP overrun -void -overrun_irq_handler(unsigned irq) -{ - dsp_rx_regs->clear_state = 1; - bp_clear_buf(DSP_RX_BUF_0); - bp_clear_buf(DSP_RX_BUF_1); - dbsm_stop(&dsp_rx_sm); - - // FIXME anything else? - - putstr("\nirq: overrun\n"); -} - -static void -start_tx_transfers(void) -{ - bp_clear_buf(DSP_TX_BUF_0); // FIXME, really goes in state machine - bp_clear_buf(DSP_TX_BUF_1); - - // fill everything with a constant 32k + 0j - - uint32_t const_sample = (32000 << 16) | 0; - int i; - for (i = 0; i < BP_NLINES; i++){ - buffer_ram(DSP_TX_BUF_0)[i] = const_sample; - buffer_ram(DSP_TX_BUF_1)[i] = const_sample; - } - - /* - * Construct ethernet header and word0 and preload into two buffers - */ - u2_eth_packet_t pkt; - memset(&pkt, 0, sizeof(pkt)); - //pkt.ehdr.dst = *host; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - u2p_set_word0(&pkt.fixed, - U2P_TX_IMMEDIATE | U2P_TX_START_OF_BURST, 0); - u2p_set_timestamp(&pkt.fixed, T_NOW); - - memcpy_wa(buffer_ram(DSP_TX_BUF_0), &pkt, sizeof(pkt)); - memcpy_wa(buffer_ram(DSP_TX_BUF_1), &pkt, sizeof(pkt)); - - - int tx_scale = 256; - - // setup Tx DSP regs - dsp_tx_regs->clear_state = 1; // reset - dsp_tx_regs->freq = 408021893; // 9.5 MHz [2**32 * fc/fsample] - dsp_tx_regs->scale_iq = (tx_scale << 16) | tx_scale; - dsp_tx_regs->interp_rate = 32; - - // kick off the state machine - // dbsm_start(&dsp_rx_sm); - - SEND_CONST_TO_DSP_TX(); // send constant buffer to DSP TX -} - - -void -buffer_irq_handler(unsigned irq) -{ - uint32_t status = buffer_pool_status->status; - - if (0){ - putstr("irq: "); - puthex32(status); - putchar('\n'); - } - - if (status & BPS_ERROR_ALL){ - // FIXME rare path, handle error conditions - } - - if (status & BPS_DONE(DSP_TX_BUF_0)){ - bp_clear_buf(DSP_TX_BUF_0); - SEND_CONST_TO_DSP_TX(); - hal_toggle_leds(0x1); - } - -} - -int -main(void) -{ - u2_init(); - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\ntx_only\n"); - - // Control LEDs - hal_set_leds(0x0, 0x3); - - if (USE_BUFFER_INTERRUPT) - pic_register_handler(IRQ_BUFFER, buffer_irq_handler); - - pic_register_handler(IRQ_OVERRUN, overrun_irq_handler); - pic_register_handler(IRQ_UNDERRUN, underrun_irq_handler); - - //pic_register_handler(IRQ_TIMER, timer_irq_handler); - //hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - - ethernet_init(); - - // initialize double buffering state machine for DSP RX -> Ethernet - dbsm_init(&dsp_rx_sm, DSP_RX_BUF_0, - &dsp_rx_recv_args, &dsp_rx_send_args, - dbsm_nop_inspector); - - // setup receive from ETH - // bp_receive_to_buf(CPU_RX_BUF, PORT_ETH, 1, 0, BP_LAST_LINE); - -#if 0 - if (hwconfig_simulation_p()){ - // If we're simulating, pretend that we got a start command from the host - eth_mac_addr_t host = {{ 0x00, 0x0A, 0xE4, 0x3E, 0xD2, 0xD5 }}; - start_rx_cmd(&host); - } -#endif - - start_tx_transfers(); // send constant buffers to DSP TX - - while(1){ - if (!USE_BUFFER_INTERRUPT) - buffer_irq_handler(0); - } -} - -// ---------------------------------------------------------------- - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - link_is_up = true; - break; - - case 100: - v = LS_100; - link_is_up = true; - break; - - case 1000: - v = LS_100; - link_is_up = true; - break; - - default: - v = 0; - link_is_up = false; - break; - } - - //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - // hal_set_leds(link_is_up ? 0x2 : 0x0, 0x2); - - printf("\neth link changed: speed = %d\n", speed); -} diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c index 6b45f8f3b..092d216aa 100644 --- a/firmware/microblaze/apps/txrx_uhd.c +++ b/firmware/microblaze/apps/txrx_uhd.c @@ -41,7 +41,6 @@ #include #include #include "clocks.h" -#include #include "usrp2/fw_common.h" #include #include @@ -266,7 +265,7 @@ void handle_udp_ctrl_packet( * Peek and Poke Register ******************************************************************/ case USRP2_CTRL_ID_POKE_THIS_REGISTER_FOR_ME_BRO: - if (ctrl_data_in->data.poke_args.addr < 0xC000){ + if (0){//ctrl_data_in->data.poke_args.addr < 0xC000){ printf("error! tried to poke into 0x%x\n", ctrl_data_in->data.poke_args.addr); } else switch(ctrl_data_in->data.poke_args.num_bytes){ diff --git a/firmware/microblaze/bootstrap b/firmware/microblaze/bootstrap index 2343025cc..5786c1624 100755 --- a/firmware/microblaze/bootstrap +++ b/firmware/microblaze/bootstrap @@ -17,6 +17,7 @@ # rm -rf *.cache +rm -rf libusrp2/.deps aclocal autoconf diff --git a/firmware/microblaze/config.guess b/firmware/microblaze/config.guess deleted file mode 120000 index 405bc3235..000000000 --- a/firmware/microblaze/config.guess +++ /dev/null @@ -1 +0,0 @@ -/usr/share/automake-1.11/config.guess \ No newline at end of file diff --git a/firmware/microblaze/config.sub b/firmware/microblaze/config.sub deleted file mode 120000 index 4d47fbcbc..000000000 --- a/firmware/microblaze/config.sub +++ /dev/null @@ -1 +0,0 @@ -/usr/share/automake-1.11/config.sub \ No newline at end of file diff --git a/firmware/microblaze/configure.ac b/firmware/microblaze/configure.ac index 46968b7fb..e27bcb557 100644 --- a/firmware/microblaze/configure.ac +++ b/firmware/microblaze/configure.ac @@ -32,6 +32,7 @@ m4_if(m4_defn([m4_PACKAGE_VERSION]), [2.64], [m4_define([_AC_LANG_IO_PROGRAM(]_GCC_LANG[)], m4_defn([AC_LANG_PROGRAM(]_GCC_LANG[)]))])]) AC_PROG_CC([mb-gcc]) +AM_PROG_CC_C_O LT_INIT ################################################## @@ -46,9 +47,6 @@ AC_PATH_PROG([HEXDUMP], [hexdump]) ################################################## AC_CONFIG_FILES([ \ Makefile \ - apps/Makefile \ - include/Makefile \ - include/net/Makefile \ - lib/Makefile \ + usrp2/Makefile \ ]) AC_OUTPUT diff --git a/firmware/microblaze/include/.gitignore b/firmware/microblaze/include/.gitignore deleted file mode 100644 index b336cc7ce..000000000 --- a/firmware/microblaze/include/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -/Makefile -/Makefile.in diff --git a/firmware/microblaze/include/Makefile.am b/firmware/microblaze/include/Makefile.am deleted file mode 100644 index 6afbbcd12..000000000 --- a/firmware/microblaze/include/Makefile.am +++ /dev/null @@ -1,30 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2008 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -include $(top_srcdir)/Makefile.common - -SUBDIRS = net - -noinst_HEADERS = \ - usrp2_fpga_regs.h \ - usrp2_i2c_addr.h \ - usrp2_clock_bits.h \ - usrp2_types.h \ - vrt/bits.h \ - vrt/types.h diff --git a/firmware/microblaze/include/compiler.h b/firmware/microblaze/include/compiler.h deleted file mode 100644 index 4fa9b49f8..000000000 --- a/firmware/microblaze/include/compiler.h +++ /dev/null @@ -1,25 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef INCLUDED_COMPILER_H -#define INCLUDED_COMPILER_H - -// FIXME gcc specific. -#define _AL4 __attribute__((aligned (4))) - - -#endif /* INCLUDED_COMPILER_H */ diff --git a/firmware/microblaze/include/net/.gitignore b/firmware/microblaze/include/net/.gitignore deleted file mode 100644 index 282522db0..000000000 --- a/firmware/microblaze/include/net/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -Makefile -Makefile.in diff --git a/firmware/microblaze/include/net/Makefile.am b/firmware/microblaze/include/net/Makefile.am deleted file mode 100644 index 32b0bf9dc..000000000 --- a/firmware/microblaze/include/net/Makefile.am +++ /dev/null @@ -1,23 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -include $(top_srcdir)/Makefile.common - -noinst_HEADERS = \ - eth_mac_addr.h \ - padded_eth_hdr.h \ - socket_address.h diff --git a/firmware/microblaze/include/net/eth_mac_addr.h b/firmware/microblaze/include/net/eth_mac_addr.h deleted file mode 100644 index b44fb68f7..000000000 --- a/firmware/microblaze/include/net/eth_mac_addr.h +++ /dev/null @@ -1,29 +0,0 @@ -/* - * Copyright 2009 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef INCLUDED_ETH_MAC_ADDR_H -#define INCLUDED_ETH_MAC_ADDR_H - -#include - -// Ethernet MAC address - -typedef struct { - uint8_t addr[6]; -} eth_mac_addr_t; - -#endif /* INCLUDED_ETH_MAC_ADDR_H */ diff --git a/firmware/microblaze/include/net/padded_eth_hdr.h b/firmware/microblaze/include/net/padded_eth_hdr.h deleted file mode 100644 index df816734f..000000000 --- a/firmware/microblaze/include/net/padded_eth_hdr.h +++ /dev/null @@ -1,37 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009,2010 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef INCLUDED_PADDED_ETH_HDR_H -#define INCLUDED_PADDED_ETH_HDR_H - -#include -#include - -/*! - * \brief Standard 14-byte ethernet header plus two leading bytes of padding. - * - * This is what a buffer contains in line 1 when using the "slow mode" - */ -typedef struct { - uint16_t pad; - eth_mac_addr_t dst; - eth_mac_addr_t src; - uint16_t ethertype; -} _AL4 padded_eth_hdr_t; - - -#endif /* INCLUDED_PADDED_ETH_HDR_H */ diff --git a/firmware/microblaze/include/net/socket_address.h b/firmware/microblaze/include/net/socket_address.h deleted file mode 100644 index 336f30a0c..000000000 --- a/firmware/microblaze/include/net/socket_address.h +++ /dev/null @@ -1,41 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2010 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef INCLUDED_SOCKET_ADDRESS_H -#define INCLUDED_SOCKET_ADDRESS_H - -#include - -// port and address are in network byte order - -typedef struct socket_address { - unsigned short port; - struct ip_addr addr; -} socket_address_t; - -static inline struct socket_address -make_socket_address(struct ip_addr addr, int port) -{ - struct socket_address r; - r.port = port; - r.addr = addr; - return r; -} - - - -#endif /* INCLUDED_SOCKET_ADDRESS_H */ diff --git a/firmware/microblaze/include/usrp2_clock_bits.h b/firmware/microblaze/include/usrp2_clock_bits.h deleted file mode 100644 index d2052e941..000000000 --- a/firmware/microblaze/include/usrp2_clock_bits.h +++ /dev/null @@ -1,55 +0,0 @@ -// -// Copyright 2010 Ettus Research LLC -// -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This file is part of GNU Radio - * - * GNU Radio is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 3, or (at your option) - * any later version. - * - * GNU Radio is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ -#ifndef INCLUDED_USRP2_CLOCK_BITS_H -#define INCLUDED_USRP2_CLOCK_BITS_H - -#define _MC_WE_LOCK 0x0001 -#define _MC_MIMO_CLK_INPUT 0x0002 // else SMA input - -/* - * Derived masks (use these): - * - * We get our input from 1 of three places: - * Our free running oscilator, our SMA connector, or from the MIMO connector - */ -#define MC_WE_DONT_LOCK 0x0000 -#define MC_WE_LOCK_TO_SMA (_MC_WE_LOCK | 0) -#define MC_WE_LOCK_TO_MIMO (_MC_WE_LOCK | _MC_MIMO_CLK_INPUT) - -/* - * Independent of the source of the clock, we may or may not drive our - * clock onto the mimo connector. Note that there are dedicated clock - * signals in each direction, so disaster doesn't occurs if we're - * unnecessarily providing clock. - */ -#define MC_PROVIDE_CLK_TO_MIMO 0x0004 - -#define MC_REF_CLK_MASK 0x0f - -#define MC_PPS_SOURCE_SMA (0x00 << 4) -#define MC_PPS_SOURCE_MIMO (0x01 << 4) - -#define MC_PPS_POLARITY_NEG (0x00 << 5) -#define MC_PPS_POLARITY_POS (0x01 << 5) - -#endif /* INCLUDED_USRP2_CLOCK_BITS_H */ diff --git a/firmware/microblaze/include/usrp2_fpga_regs.h b/firmware/microblaze/include/usrp2_fpga_regs.h deleted file mode 100644 index b0f83df60..000000000 --- a/firmware/microblaze/include/usrp2_fpga_regs.h +++ /dev/null @@ -1,80 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef INCLUDED_USRP2_FPGA_REGS_H -#define INCLUDED_USSRP2_FPGA_REGS_H - -#include "usrp2_cdefs.h" - -__U2_BEGIN_DECLS - -// ---------------------------------------------------------------- - -#define DSP_CORE_TX_BASE 128 - -// DUC center frequency tuning word (phase increment) -#define FR_TX_FREQ_0 (0 + DSP_CORE_TX_BASE) - -// I & Q output scaling, 16.0 format ((I_SCALE << 16) | Q_SCALE) -#define FR_TX_SCALE_0 (1 + DSP_CORE_TX_BASE) - -// Tx interpolation rate (set to 1 less than desired rate) -#define FR_TX_INTERP_RATE_0 (2 + DSP_CORE_TX_BASE) - -// Write 1 (actually anything) to clear tx state -#define FR_TX_CLEAR_STATE_0 (3 + DSP_CORE_TX_BASE) - -// ---------------------------------------------------------------- - -#define DSP_CORE_RX_BASE 160 - -// DDC center frequency tuning word (phase increment) -#define FR_RX_FREQ_0 (0 + DSP_CORE_RX_BASE) - -// I & Q input scaling, 16.0 format ((I_SCALE << 16) | Q_SCALE) -#define FR_RX_SCALE_0 (1 + DSP_CORE_RX_BASE) - -// Rx decimation rate (set to 1 less than desired rate) -#define FR_RX_DECIM_RATE_0 (2 + DSP_CORE_RX_BASE) - -// The next two registers concatenated are the Rx command register. -// -// Writing FR_RX_TIME_TO_RX_0 writes the concatenated value into the -// cmd queue. Thus, if you're writing both, be sure to write -// FR_RX_QTY_0 first. -// -// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -// | Timestamp | -// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - -#define FR_RX_TIME_TO_RX (3 + DSP_CORE_RX_BASE) - -// 23-bits 9-bits -// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ -// | number_of_lines | lines_per_frame | -// +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - -#define FR_RX_QTY_0 (4 + DSP_CORE_RX_BASE) - -// write a 1 (anything actually) to clear the overrun -#define FR_RX_CLR_OVERRUN_0 (5 + DSP_CORE_RX_BASE) - - -__U2_END_DECLS - -#endif /* INCLUDED_USRP2_FPGA_REGS_H */ diff --git a/firmware/microblaze/include/usrp2_i2c_addr.h b/firmware/microblaze/include/usrp2_i2c_addr.h deleted file mode 100644 index 46f5a7556..000000000 --- a/firmware/microblaze/include/usrp2_i2c_addr.h +++ /dev/null @@ -1,78 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2004,2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef INCLUDED_USRP2_I2C_ADDR_H -#define INCLUDED_USRP2_I2C_ADDR_H - -// I2C addresses - -#define I2C_DEV_EEPROM 0x50 // 24LC02[45]: 7-bits 1010xxx - -#define I2C_ADDR_MBOARD (I2C_DEV_EEPROM | 0x0) -#define I2C_ADDR_TX_A (I2C_DEV_EEPROM | 0x4) -#define I2C_ADDR_RX_A (I2C_DEV_EEPROM | 0x5) - - -// format of USRP2 motherboard rom -// 00: 0x00 h/w rev (LSB) -// 01: 0x00 h/w rev (MSB) -// 02: 0x00 MAC addr 0 -// 03: 0x50 MAC addr 1 -// 04: 0xC2 MAC addr 2 -// 05: 0x85 MAC addr 3 -// 06: 0x3. MAC addr 4 -// 07: 0x.. MAC addr 5 - -#define MBOARD_REV_LSB 0x00 -#define MBOARD_REV_MSB 0x01 -#define MBOARD_MAC_ADDR 0x02 -#define MBOARD_IP_ADDR 0x0C - - -// format of daughterboard EEPROM -// 00: 0xDB code for ``I'm a daughterboard'' -// 01: .. Daughterboard ID (LSB) -// 02: .. Daughterboard ID (MSB) -// 03: .. io bits 7-0 direction (bit set if it's an output from m'board) -// 04: .. io bits 15-8 direction (bit set if it's an output from m'board) -// 05: .. ADC0 DC offset correction (LSB) -// 06: .. ADC0 DC offset correction (MSB) -// 07: .. ADC1 DC offset correction (LSB) -// 08: .. ADC1 DC offset correction (MSB) -// ... -// 1f: .. negative of the sum of bytes [0x00, 0x1e] - -#define DB_EEPROM_MAGIC 0x00 -#define DB_EEPROM_MAGIC_VALUE 0xDB -#define DB_EEPROM_ID_LSB 0x01 -#define DB_EEPROM_ID_MSB 0x02 -#define DB_EEPROM_OE_LSB 0x03 -#define DB_EEPROM_OE_MSB 0x04 -#define DB_EEPROM_OFFSET_0_LSB 0x05 // offset correction for ADC or DAC 0 -#define DB_EEPROM_OFFSET_0_MSB 0x06 -#define DB_EEPROM_OFFSET_1_LSB 0x07 // offset correction for ADC or DAC 1 -#define DB_EEPROM_OFFSET_1_MSB 0x08 -#define DB_EEPROM_CHKSUM 0x1f - -#define DB_EEPROM_CLEN 0x20 // length of common portion of eeprom - -#define DB_EEPROM_CUSTOM_BASE DB_EEPROM_CLEN // first avail offset for - // daughterboard specific use - -#endif /* INCLUDED_USRP2_I2C_ADDR_H */ - diff --git a/firmware/microblaze/include/usrp2_types.h b/firmware/microblaze/include/usrp2_types.h deleted file mode 100644 index fe45936f0..000000000 --- a/firmware/microblaze/include/usrp2_types.h +++ /dev/null @@ -1,105 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2008 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef INCLUDED_USRP2_TYPES_H -#define INCLUDED_USRP2_TYPES_H - -#include - -/*! - * \brief Fixed point representation of a frequency in Hertz (VITA-49 compatible) - * - * 64-bit two's complement, with the radix point 20 bits up from the bottom. - * Q44.20 format (20 bits to the right of the radix point) - * - * Values range from +/- 8.79 terahertz with a resolution of 0.95 microhertz. - */ -typedef int64_t u2_fxpt_freq_t; - -#define U2_FPF_RP 20 // location of radix point in u2_fxpt_freq_t - -// macro so we can init structs at compile time -#define U2_DOUBLE_TO_FXPT_FREQ(f) (int64_t)((f) * (1LL << U2_FPF_RP)) - -static inline u2_fxpt_freq_t -u2_double_to_fxpt_freq(double f) -{ - return U2_DOUBLE_TO_FXPT_FREQ(f); -} - -static inline int -u2_fxpt_freq_round_to_int(u2_fxpt_freq_t fx) -{ - return (int)((fx+(1<<(U2_FPF_RP-1)))>>U2_FPF_RP); -} - -static inline double -u2_fxpt_freq_to_double(u2_fxpt_freq_t fx) -{ - return ((double) fx) * 1.0/(1 << U2_FPF_RP); -} - -static inline uint32_t -u2_fxpt_freq_hi(u2_fxpt_freq_t f) -{ - return ((f >> 32) & 0xffffffff); -} - -static inline uint32_t -u2_fxpt_freq_lo(u2_fxpt_freq_t f) -{ - return (f & 0xffffffff); -} - -static inline u2_fxpt_freq_t -u2_fxpt_freq_from_hilo(uint32_t hi, uint32_t lo) -{ - return (((u2_fxpt_freq_t) hi) << 32) | lo; -} - -/*! - * \brief Fixed point representation of a gain in dB (VITA-49 compatible) - * - * 16-bit two's complement, with the radix point 7 bits up from the bottom. - * Q9.7 format (7 bits to the right of the radix point) - */ -typedef int16_t u2_fxpt_gain_t; - -#define U2_FPG_RP 7 // location of radix point in u2_fxpt_gain_t - -// macro so we can init structs at compile time -#define U2_DOUBLE_TO_FXPT_GAIN(g) (int16_t)((g) * (1 << U2_FPG_RP)) - -static inline u2_fxpt_gain_t -u2_double_to_fxpt_gain(double g) -{ - return U2_DOUBLE_TO_FXPT_GAIN(g); -} - -static inline float -u2_fxpt_gain_to_double(u2_fxpt_gain_t fx) -{ - return ((double) fx) * 1.0/(1 << U2_FPG_RP); -} - -static inline int -u2_fxpt_gain_round_to_int(u2_fxpt_gain_t fx) -{ - return (int)((fx+(1<<(U2_FPG_RP-1)))>>U2_FPG_RP); -} - -#endif /* INCLUDED_USRP2_TYPES_H */ diff --git a/firmware/microblaze/include/vrt/bits.h b/firmware/microblaze/include/vrt/bits.h deleted file mode 100644 index 54eeec7b4..000000000 --- a/firmware/microblaze/include/vrt/bits.h +++ /dev/null @@ -1,92 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef INCLUDED_VRT_BITS_H -#define INCLUDED_VRT_BITS_H - -#include - - -/* VRT Header bits */ - -#define VRTH_PT_MASK (0xf << 28) -#define VRTH_PT_IF_DATA_NO_SID (0x0 << 28) // IF-Data, no stream id -#define VRTH_PT_IF_DATA_WITH_SID (0x1 << 28) // IF-Data, w/ stream id -#define VRTH_PT_EXT_DATA_NO_SID (0x2 << 28) -#define VRTH_PT_EXT_DATA_WITH_SID (0x3 << 28) -#define VRTH_PT_IF_CONTEXT (0x4 << 28) -#define VRTH_PT_EXT_CONTEXT (0x5 << 28) - -#define VRTH_HAS_CLASSID (1 << 27) -#define VRTH_HAS_TRAILER (1 << 26) // Data pkts only -#define VRTH_START_OF_BURST (1 << 25) // Data (Tx) pkts only -#define VRTH_END_OF_BURST (1 << 24) // Data (Tx) pkts only -#define VRTH_TSM (1 << 24) // Context pkts only - -#define VRTH_TSI_MASK (0x3 << 22) -#define VRTH_TSI_NONE (0x0 << 22) -#define VRTH_TSI_UTC (0x1 << 22) -#define VRTH_TSI_GPS (0x2 << 22) -#define VRTH_TSI_OTHER (0x3 << 22) - -#define VRTH_TSF_MASK (0x3 << 20) -#define VRTH_TSF_NONE (0x0 << 20) -#define VRTH_TSF_SAMPLE_CNT (0x1 << 20) -#define VRTH_TSF_REAL_TIME_PS (0x2 << 20) -#define VRTH_TSF_FREE_RUNNING (0x3 << 20) - -#define VRTH_PKT_CNT_SHIFT 16 -#define VRTH_PKT_CNT_MASK (0xf << 16) - -#define VRTH_PKT_SIZE_MASK 0xffff - - -static inline int -vrth_pkt_cnt(uint32_t h) -{ - return (h & VRTH_PKT_CNT_MASK) >> 16; -} - -static inline int -vrth_pkt_size(uint32_t h) -{ - return h & VRTH_PKT_SIZE_MASK; -} - -/* - * Trailer bits - */ -#define TR_E (1 << 8) - -#define TR_ENABLE(x) ((x) << 20) -#define TR_STATE(x) ((x) << 8) - -// Use these with TR_ENABLE and TR_STATE -#define TR_CAL_TIME (1 << 11) -#define TR_VALID_DATA (1 << 10) -#define TR_REF_LOCK (1 << 9) -#define TR_AGC (1 << 8) -#define TR_DETECTED_SIG (1 << 7) -#define TR_SPECTRAL_INVERSION (1 << 6) -#define TR_OVER_RANGE (1 << 5) -#define TR_SAMPLE_LOSS (1 << 4) -#define TR_USER_3 (1 << 3) -#define TR_USER_2 (1 << 2) -#define TR_USER_1 (1 << 1) -#define TR_USER_0 (1 << 0) - -#endif /* INCLUDED_VRT_BITS_H */ diff --git a/firmware/microblaze/include/vrt/types.h b/firmware/microblaze/include/vrt/types.h deleted file mode 100644 index edfa4ec37..000000000 --- a/firmware/microblaze/include/vrt/types.h +++ /dev/null @@ -1,138 +0,0 @@ -/* -*- c++ -*- */ -/* - * Copyright 2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#ifndef INCLUDED_VRT_TYPES_H -#define INCLUDED_VRT_TYPES_H - -#include - -/* macros for dealing with fixed point numbers */ -#define _FXPT_C(_type, _x, _rp) ((_type)((_x)*(1ll << _rp))) -#define _FXPT_TO_INT(_x, _one) (((_x) + ((_one)/2))/(_one)) -#define _FXPT_TO_DOUBLE(_x, _one) ((double)(_x) * (1.0/(_one))) - -/*********************************************************************** - * The VRT Altitude Type (meters) - **********************************************************************/ -typedef int32_t vrt_altitude_t; -#define VRT_ALTITUDE_RP 5 -#define VRT_ALTITUDE_C(_x) _FXPT_C(vrt_altitude_t, _x, VRT_ALTITUDE_RP) - -static inline vrt_altitude_t -double_to_vrt_altitude(double num){ - return VRT_ALTITUDE_C(num); -} - -static inline int32_t -vrt_altitude_round_to_int(vrt_altitude_t fx){ - return _FXPT_TO_INT(fx, VRT_ALTITUDE_C(1)); -} - -static inline double -vrt_altitude_to_double(vrt_altitude_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_ALTITUDE_C(1)); -} - -/*********************************************************************** - * The VRT Geolocation Angle Type (degrees) - **********************************************************************/ -typedef int32_t vrt_geo_angle_t; -#define VRT_GEO_ANGLE_RP 22 -#define VRT_GEO_ANGLE_C(_x) _FXPT_C(vrt_geo_angle_t, _x, VRT_GEO_ANGLE_RP) - -static inline vrt_geo_angle_t -double_to_vrt_geo_angle(double num){ - return VRT_GEO_ANGLE_C(num); -} - -static inline int16_t -vrt_geo_angle_round_to_int(vrt_geo_angle_t fx){ - return _FXPT_TO_INT(fx, VRT_GEO_ANGLE_C(1)); -} - -static inline double -vrt_geo_angle_to_double(vrt_geo_angle_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_GEO_ANGLE_C(1)); -} - -/*********************************************************************** - * The VRT Frequency Type (Hz) - **********************************************************************/ -typedef int64_t vrt_freq_t; -#define VRT_FREQ_RP 20 -#define VRT_FREQ_C(_x) _FXPT_C(vrt_freq_t, _x, VRT_FREQ_RP) - -static inline vrt_freq_t -double_to_vrt_freq(double num){ - return VRT_FREQ_C(num); -} - -static inline int64_t -vrt_freq_round_to_int(vrt_freq_t fx){ - return _FXPT_TO_INT(fx, VRT_FREQ_C(1)); -} - -static inline double -vrt_freq_to_double(vrt_freq_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_FREQ_C(1)); -} - -/*********************************************************************** - * The VRT Gain Type (dB) - **********************************************************************/ -typedef int16_t vrt_gain_t; -#define VRT_GAIN_RP 7 -#define VRT_GAIN_C(_x) _FXPT_C(vrt_gain_t, _x, VRT_GAIN_RP) - -static inline vrt_gain_t -double_to_vrt_gain(double num){ - return VRT_GAIN_C(num); -} - -static inline int16_t -vrt_gain_round_to_int(vrt_gain_t fx){ - return _FXPT_TO_INT(fx, VRT_GAIN_C(1)); -} - -static inline double -vrt_gain_to_double(vrt_gain_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_GAIN_C(1)); -} - -/*********************************************************************** - * The VRT Temperature Type (Celcius) - **********************************************************************/ -typedef int16_t vrt_temp_t; -#define VRT_TEMP_RP 6 -#define VRT_TEMP_C(_x) _FXPT_C(vrt_temp_t, _x, VRT_TEMP_RP) - -static inline vrt_temp_t -double_to_vrt_temp(double num){ - return VRT_TEMP_C(num); -} - -static inline int16_t -vrt_temp_round_to_int(vrt_temp_t fx){ - return _FXPT_TO_INT(fx, VRT_TEMP_C(1)); -} - -static inline double -vrt_temp_to_double(vrt_temp_t fx){ - return _FXPT_TO_DOUBLE(fx, VRT_TEMP_C(1)); -} - -#endif /* INCLUDED_VRT_TYPES_H */ diff --git a/firmware/microblaze/lib/.gitignore b/firmware/microblaze/lib/.gitignore deleted file mode 100644 index 5d838bf6c..000000000 --- a/firmware/microblaze/lib/.gitignore +++ /dev/null @@ -1,40 +0,0 @@ -*~ -/*-stamp -/*.a -/*.bin -/*.dump -/*.log -/*.rom -/.deps -/Makefile -/Makefile.in -/aclocal.m4 -/autom4te.cache -/blink_leds -/blink_leds2 -/build -/compile -/config.h -/config.h.in -/config.log -/config.status -/configure -/depcomp -/eth_test -/gen_eth_packets -/ibs_rx_test -/ibs_tx_test -/install-sh -/libtool -/ltmain.sh -/missing -/py-compile -/rcv_eth_packets -/run_tests.sh -/stamp-h1 -/test1 -/test_phy_comm -/timer_test -/buf_ram_test -/buf_ram_zero -/hello diff --git a/firmware/microblaze/lib/Makefile.am b/firmware/microblaze/lib/Makefile.am deleted file mode 100644 index b51d74463..000000000 --- a/firmware/microblaze/lib/Makefile.am +++ /dev/null @@ -1,87 +0,0 @@ -# -# Copyright 2010 Ettus Research LLC -# -# Copyright 2007 Free Software Foundation, Inc. -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 3 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see . -# - -include $(top_srcdir)/Makefile.common - -noinst_LIBRARIES = \ - libu2fw.a - -libu2fw_a_SOURCES = \ - abort.c \ - ad9510.c \ - bsm12.c \ - buffer_pool.c \ - clocks.c \ - dbsm.c \ - eeprom.c \ - ethernet.c \ - eth_mac.c \ - _exit.c \ - exit.c \ - hal_io.c \ - hal_uart.c \ - i2c.c \ - mdelay.c \ - memcpy_wa.c \ - memset_wa.c \ - nonstdio.c \ - pic.c \ - print_mac_addr.c \ - print_rmon_regs.c \ - print_buffer.c \ - printf.c \ - sd.c \ - spi.c \ - u2_init.c \ - net_common.c \ - arp_cache.c \ - banal.c - -noinst_HEADERS = \ - ad9510.h \ - bsm12.h \ - buffer_pool.h \ - clocks.h \ - dbsm.h \ - eth_mac.h \ - eth_mac_regs.h \ - eth_phy.h \ - ethernet.h \ - hal_io.h \ - hal_uart.h \ - i2c.h \ - mdelay.h \ - memcpy_wa.h \ - memory_map.h \ - memset_wa.h \ - nonstdio.h \ - pic.h \ - print_rmon_regs.h \ - sd.h \ - spi.h \ - stdint.h \ - stdio.h \ - u2_init.h \ - usrp2_bytesex.h \ - wb16550.h \ - net_common.h \ - if_arp.h \ - arp_cache.h \ - banal.h \ - ethertype.h diff --git a/firmware/microblaze/lib/Makefile.inc b/firmware/microblaze/lib/Makefile.inc new file mode 100644 index 000000000..a576d1ccb --- /dev/null +++ b/firmware/microblaze/lib/Makefile.inc @@ -0,0 +1,47 @@ +# +# Copyright 2010 Ettus Research LLC +# +# Copyright 2007 Free Software Foundation, Inc. +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# + +COMMON_SRCS = \ + $(top_srcdir)/lib/u2_init.c \ + $(top_srcdir)/lib/abort.c \ + $(top_srcdir)/lib/ad9510.c \ + $(top_srcdir)/lib/bsm12.c \ + $(top_srcdir)/lib/buffer_pool.c \ + $(top_srcdir)/lib/clocks.c \ + $(top_srcdir)/lib/dbsm.c \ + $(top_srcdir)/lib/eeprom.c \ + $(top_srcdir)/lib/eth_mac.c \ + $(top_srcdir)/lib/_exit.c \ + $(top_srcdir)/lib/exit.c \ + $(top_srcdir)/lib/hal_io.c \ + $(top_srcdir)/lib/hal_uart.c \ + $(top_srcdir)/lib/i2c.c \ + $(top_srcdir)/lib/mdelay.c \ + $(top_srcdir)/lib/memcpy_wa.c \ + $(top_srcdir)/lib/memset_wa.c \ + $(top_srcdir)/lib/nonstdio.c \ + $(top_srcdir)/lib/pic.c \ + $(top_srcdir)/lib/print_mac_addr.c \ + $(top_srcdir)/lib/print_rmon_regs.c \ + $(top_srcdir)/lib/print_buffer.c \ + $(top_srcdir)/lib/printf.c \ + $(top_srcdir)/lib/spi.c \ + $(top_srcdir)/lib/net_common.c \ + $(top_srcdir)/lib/arp_cache.c \ + $(top_srcdir)/lib/banal.c diff --git a/firmware/microblaze/lib/clock_bits.h b/firmware/microblaze/lib/clock_bits.h new file mode 100644 index 000000000..d2052e941 --- /dev/null +++ b/firmware/microblaze/lib/clock_bits.h @@ -0,0 +1,55 @@ +// +// Copyright 2010 Ettus Research LLC +// +/* + * Copyright 2008 Free Software Foundation, Inc. + * + * This file is part of GNU Radio + * + * GNU Radio is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 3, or (at your option) + * any later version. + * + * GNU Radio is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef INCLUDED_USRP2_CLOCK_BITS_H +#define INCLUDED_USRP2_CLOCK_BITS_H + +#define _MC_WE_LOCK 0x0001 +#define _MC_MIMO_CLK_INPUT 0x0002 // else SMA input + +/* + * Derived masks (use these): + * + * We get our input from 1 of three places: + * Our free running oscilator, our SMA connector, or from the MIMO connector + */ +#define MC_WE_DONT_LOCK 0x0000 +#define MC_WE_LOCK_TO_SMA (_MC_WE_LOCK | 0) +#define MC_WE_LOCK_TO_MIMO (_MC_WE_LOCK | _MC_MIMO_CLK_INPUT) + +/* + * Independent of the source of the clock, we may or may not drive our + * clock onto the mimo connector. Note that there are dedicated clock + * signals in each direction, so disaster doesn't occurs if we're + * unnecessarily providing clock. + */ +#define MC_PROVIDE_CLK_TO_MIMO 0x0004 + +#define MC_REF_CLK_MASK 0x0f + +#define MC_PPS_SOURCE_SMA (0x00 << 4) +#define MC_PPS_SOURCE_MIMO (0x01 << 4) + +#define MC_PPS_POLARITY_NEG (0x00 << 5) +#define MC_PPS_POLARITY_POS (0x01 << 5) + +#endif /* INCLUDED_USRP2_CLOCK_BITS_H */ diff --git a/firmware/microblaze/lib/clocks.c b/firmware/microblaze/lib/clocks.c index ccc4a7cc7..2b352a385 100644 --- a/firmware/microblaze/lib/clocks.c +++ b/firmware/microblaze/lib/clocks.c @@ -25,40 +25,60 @@ #include "ad9510.h" #include "spi.h" #include "u2_init.h" -#include "nonstdio.h" + +//USRP2PLUS clocks: +//Clock 0: testclk +//Clock 1: FPGA clk +//Clock 2: ADC clk +//Clock 3: DAC clk +//Clock 4: SER clk +//Clock 5: TX dboard clk +//Clock 6: EXP clk +//Clock 7: RX dboard clk + +//TODO: should have enough brains to init the FPGA clock for USRP2+. all others are suspect. +//note that without EEPROM support u2_hw_rev_major is going to be incorrect. void clocks_init(void) { // Set up basic clocking functions in AD9510 - ad9510_write_reg(0x45, 0x00); // CLK2 drives distribution + ad9510_write_reg(0x45, 0x01); // CLK2 drives distribution + //enable the 100MHz clock output to the FPGA for 50MHz CPU clock clocks_enable_fpga_clk(true, 1); spi_wait(); // Set up PLL for 10 MHz reference // Reg 4, A counter, Don't Care - ad9510_write_reg(0x05, 0x00); // Reg 5, B counter MSBs, 0 - ad9510_write_reg(0x06, 0x05); // Reg 6, B counter LSBs, 5 +// ad9510_write_reg(0x05, 0x00); // Reg 5, B counter MSBs, 0 +// ad9510_write_reg(0x06, 0x05); // Reg 6, B counter LSBs, 5 // Reg 7, Loss of reference detect, doesn't work yet, 0 - ad9510_write_reg(0x5A, 0x01); // Update Regs +// ad9510_write_reg(0x5A, 0x01); // Update Regs // Primary clock configuration - clocks_mimo_config(MC_WE_DONT_LOCK); +// clocks_mimo_config(MC_WE_DONT_LOCK); + + + //wait for the clock to stabilize + while(!clocks_lock_detect()); + + //issue a reset to the DCM so it locks up to the new freq + output_regs->clk_ctrl |= CLK_RESET; // Set up other clocks //clocks_enable_test_clk(false, 0); //clocks_enable_tx_dboard(false, 0); //clocks_enable_rx_dboard(false, 0); - clocks_enable_eth_phyclk(false, 0); +// clocks_enable_eth_phyclk(false, 0); //PHY clk is separate now (u2r4, u2p) // Enable clock to ADCs and DACs //clocks_enable_dac_clk(true, 1); //clocks_enable_adc_clk(true, 1); } - +/* void clocks_mimo_config(int flags) { @@ -86,7 +106,7 @@ clocks_mimo_config(int flags) spi_wait(); // Allow for clock switchover - + // The below masks include 0x10, which issues a reset to the DCM. if (flags & _MC_WE_LOCK){ // WE LOCK if (flags & _MC_MIMO_CLK_INPUT) { // Turn on ref output and choose the MIMO connector @@ -103,18 +123,17 @@ clocks_mimo_config(int flags) } // Do we drive a clock onto the MIMO connector? - if (flags & MC_PROVIDE_CLK_TO_MIMO) - clocks_enable_clkexp_out(true,10); - else - clocks_enable_clkexp_out(false,0); +// if (flags & MC_PROVIDE_CLK_TO_MIMO) +// clocks_enable_clkexp_out(true,10); +// else +// clocks_enable_clkexp_out(false,0); } +*/ bool clocks_lock_detect() { - if(pic_regs->pending & PIC_CLKSTATUS) - return true; - return false; + return (pic_regs->pending & PIC_CLKSTATUS); } int inline @@ -136,21 +155,23 @@ clocks_gen_div(int divisor) #define CLOCK_MODE_LVDS 2 #define CLOCK_MODE_CMOS 3 +//CHANGED: set to PECL for default behavior void clocks_enable_XXX_clk(bool enable, int divisor, int reg_en, int reg_div, int mode) { int enable_word, div_word, div_en_word; switch(mode) { - case CLOCK_MODE_PECL : - enable_word = enable ? 0x08 : 0x0A; - break; case CLOCK_MODE_LVDS : enable_word = enable ? 0x02 : 0x03; break; case CLOCK_MODE_CMOS : enable_word = enable ? 0x08 : 0x09; break; + case CLOCK_MODE_PECL : + default: + enable_word = enable ? 0x08 : 0x0A; + break; } if(enable && (divisor>1)) { div_word = clocks_gen_div(divisor); @@ -180,8 +201,8 @@ clocks_enable_fpga_clk(bool enable, int divisor) { clocks_enable_XXX_clk(enable,divisor,0x3D,0x4A,CLOCK_MODE_PECL); } - -// Clock 2 on Rev 3, Clock 5 on Rev 4 +/* +// Clock 2 on Rev 3, Clock 5 on Rev 4, Clock 6 on USRP2+ void clocks_enable_clkexp_out(bool enable, int divisor) { @@ -192,13 +213,19 @@ clocks_enable_clkexp_out(bool enable, int divisor) ad9510_write_reg(0x35,0x00); // Set Full Scale to nearly 10ns ad9510_write_reg(0x36,0x1c); // Set fine delay. 0x20 is midscale clocks_enable_XXX_clk(enable,divisor,0x41,0x52,CLOCK_MODE_LVDS); - } + else if(u2_hw_rev_major == 10) { + ad9510_write_reg(0x34, 0x00); + ad9510_write_reg(0x35, 0x00); + ad9510_write_reg(0x36, 0x1C); + clocks_enable_XXX_clk(enable, divisor, 0x42, 0x52, CLOCK_MODE_LVDS); + } else - putstr("ERR: Invalid Rev\n"); + putstr("ERR (clocks_enable_clkexp_out): Invalid hw rev, don't know what to do!\n"); } - -// Clock 5 on Rev 3, none (was 2) on Rev 4 +*/ +/* +// Clock 5 on Rev 3, none (was 2) on Rev 4, none on USRP2+ void clocks_enable_eth_phyclk(bool enable, int divisor) { @@ -207,9 +234,9 @@ clocks_enable_eth_phyclk(bool enable, int divisor) else if(u2_hw_rev_major == 4) clocks_enable_XXX_clk(enable,divisor,0x3E,0x4C,CLOCK_MODE_PECL); else - putstr("ERR: Invalid Rev\n"); + putstr("(clocks_enable_eth_phyclk): no eth PHY clock or invalid hw rev\n"); //not really an error } - +*/ // Clock 3 /*void clocks_enable_dac_clk(bool enable, int divisor) diff --git a/firmware/microblaze/lib/clocks.h b/firmware/microblaze/lib/clocks.h index 43d5a05c2..28d1d542f 100644 --- a/firmware/microblaze/lib/clocks.h +++ b/firmware/microblaze/lib/clocks.h @@ -26,7 +26,7 @@ */ #include -#include +#include "clock_bits.h" /*! @@ -43,7 +43,7 @@ void clocks_init(void); * Configure our master clock source, and whether or not we drive a * clock onto the mimo connector. See MC_flags in usrp2_mimo_config.h. */ -void clocks_mimo_config(int flags); +//void clocks_mimo_config(int flags); /*! * \brief Lock Detect -- Return True if our PLL is locked @@ -63,12 +63,12 @@ void clocks_enable_fpga_clk(bool enable, int divisor); /*! * \brief Enable or disable clock output sent to MIMO connector */ -void clocks_enable_clkexp_out(bool enable, int divisor); +//void clocks_enable_clkexp_out(bool enable, int divisor); /*! * \brief Enable or disable ethernet phyclk, should always be disabled */ -void clocks_enable_eth_phyclk(bool enable, int divisor); +//void clocks_enable_eth_phyclk(bool enable, int divisor); /*! * \brief Enable or disable clock to DAC diff --git a/firmware/microblaze/lib/compiler.h b/firmware/microblaze/lib/compiler.h new file mode 100644 index 000000000..4fa9b49f8 --- /dev/null +++ b/firmware/microblaze/lib/compiler.h @@ -0,0 +1,25 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef INCLUDED_COMPILER_H +#define INCLUDED_COMPILER_H + +// FIXME gcc specific. +#define _AL4 __attribute__((aligned (4))) + + +#endif /* INCLUDED_COMPILER_H */ diff --git a/firmware/microblaze/lib/eth_mac.c b/firmware/microblaze/lib/eth_mac.c index 375d3f4d4..034a4d494 100644 --- a/firmware/microblaze/lib/eth_mac.c +++ b/firmware/microblaze/lib/eth_mac.c @@ -83,14 +83,6 @@ eth_mac_read_rmon(int addr) int eth_mac_miim_read(int addr) { - if (hwconfig_simulation_p()){ - switch(addr){ - case PHY_LINK_AN: - return LANSR_MASTER | LANSR_LINK_GOOD | LANSR_SPEED_1000; - default: - return 0; - } - } int phy_addr = PHY_ADDR; eth_mac->miiaddress = ((addr & 0x1f) << 8) | phy_addr; @@ -112,7 +104,7 @@ eth_mac_miim_write(int addr, int value) eth_mac->miitx_data = value; eth_mac->miicommand = MIIC_WCTRLDATA; - //printf("MIIM-WRITE ADDR 0x%x VAL 0x%x\n",addr,value); +// printf("MIIM-WRITE ADDR 0x%x VAL 0x%x\n",addr,value); while((eth_mac->miistatus & MIIS_BUSY) != 0) ; } diff --git a/firmware/microblaze/lib/eth_phy.h b/firmware/microblaze/lib/eth_phy.h deleted file mode 100644 index 6c16f97b7..000000000 --- a/firmware/microblaze/lib/eth_phy.h +++ /dev/null @@ -1,219 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2007 Free Software Foundation, Inc. - * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* Much of this was extracted from the Linux e1000_hw.h file */ - -#ifndef INCLUDED_ETH_PHY_H -#define INCLUDED_ETH_PHY_H - -/* PHY 1000 MII Register/Bit Definitions */ -/* PHY Registers defined by IEEE */ - -#define PHY_CTRL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Regiser */ -#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ -#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ -#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ -#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ -#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ -#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ - -/* PHY 1000 MII Register additions in DP83856 */ -/* The part implements 0x00 thru 0x1f; we use these. */ - -#define PHY_LINK_AN 0x11 /* Link and Auto Negotiation Status Reg */ -#define PHY_INT_STATUS 0x14 /* Interupt Status Reg (RO) */ -#define PHY_INT_MASK 0x15 /* Interrupt Mask Reg (RW) */ -#define PHY_INT_CLEAR 0x17 /* Interrupt Clear Reg (RW) */ - - -/* Bit definitions for some of the registers above */ - -/* PHY Control Register (PHY_CTRL) */ -#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ - -/* PHY Status Register (PHY_STATUS) */ -#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ -#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ - -/* Autoneg Advertisement Register (PHY_AUTONEG_ADV) */ -#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ -#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ -#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ -#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ -#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ -#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ - -/* Link Partner Ability Register (Base Page) (PHY_LP_ABILITY) */ -#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ -#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ -#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ -#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ -#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ -#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ -#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ -#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ -#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ -#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ -#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ - -/* Autoneg Expansion Register (PHY_AUTONEG_EXP) */ -#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ -#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ -#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ -#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ -#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ - -/* Next Page TX Register (PHY_NEXT_PAGE_TX) */ -#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ -#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges - * of different NP - */ -#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg - * 0 = cannot comply with msg - */ -#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ -#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow - * 0 = sending last NP - */ - -/* Link Partner Next Page Register (PHY_LP_NEXT_PAGE) */ -#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ -#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges - * of different NP - */ -#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg - * 0 = cannot comply with msg - */ -#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ -#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ -#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow - * 0 = sending last NP - */ - -/* 1000BASE-T Control Register (PHY_1000T_CTRL) */ -#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ -#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ -#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ - /* 0=DTE device */ -#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ - /* 0=Configure PHY as Slave */ -#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ - /* 0=Automatic Master/Slave config */ -#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ -#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ -#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ -#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ -#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ - -/* 1000BASE-T Status Register (PHY_1000T_STATUS) */ -#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ -#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ -#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ -#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ -#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ -#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ -#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ -#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12 -#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13 -#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 -#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20 -#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 - -/* Extended Status Register (PHY_EXT_STATUS) */ -#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ -#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ -#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ -#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ - -#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ -#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ - -#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ - /* (0=enable, 1=disable) */ - -/* Link and Auto Negotiation Status Reg (PHY_LINK_AN) [READ-ONLY] */ -#define LANSR_MASTER 0x0001 /* 1=PHY is currently in master mode */ -#define LANSR_FULL_DUPLEX 0x0002 /* 1=PHY is currently full duplex */ -#define LANSR_LINK_GOOD 0x0004 /* 1=a good link is established */ -#define LANSR_SPEED_MASK 0x0018 -#define LANSR_SPEED_10 0x0000 /* 10Mb/s */ -#define LANSR_SPEED_100 0x0008 /* 100Mb/s */ -#define LANSR_SPEED_1000 0x0010 /* 1000Mb/s */ -#define LANSR_SPEED_RSRVD 0x0018 /* reserved */ -#define LANSR_NON_COMP_MODE 0x0020 /* 1=detects only in non-compliant mode */ -#define LANSR_DEEP_LOOPBACK 0x0040 /* 1=the PHY operates in deep loopback mode */ -#define LANSR_SHALLOW_LOOPBACK 0x0080 /* 1=the PHY operates in shallow loopback mode */ -#define LANSR_RSRVD_8 0x0100 /* reserved */ -#define LANSR_FIFO_ERR 0x0200 /* 1=FIFO error occurred */ -#define LANSR_MDIX_XOVER 0x0400 /* 1=PHY's MDI is in cross-over mode */ -#define LANSR_RSRVD_11 0x0800 /* resevered */ -#define LANSR_TP_POLARITY_REV 0xf000 /* Twisted pair polarity status A:D([15:12]) 1=reversed */ - -/* Interrupt status, mask and clear regs (PHY_INT_{STATUS,MASK,CLEAR}) */ -#define PHY_INT_RSRVD_0 0x0001 /* reserved */ -#define PHY_INT_RSRVD_1 0x0002 /* reserved */ -#define PHY_INT_RSRVD_2 0x0004 /* reserved */ -#define PHY_INT_REM_FLT_CNG 0x0008 /* Remote Fault Changed */ -#define PHY_INT_AN_CMPL 0x0010 /* Auto-negotiation completion */ -#define PHY_INT_NXT_PG_RCVD 0x0020 /* Next Page Received */ -#define PHY_INT_JABBER_CNG 0x0040 /* Jabber Changed */ -#define PHY_INT_NO_LINK 0x0080 /* No link after auto-negotiation */ -#define PHY_INT_NO_HCD 0x0100 /* AN couldn't determine highest common denominator */ -#define PHY_INT_MAS_SLA_ERR 0x0200 /* Master / Slave Error: couldn't resolve */ -#define PHY_INT_PRL_DET_FLT 0x0400 /* Parallel detection fault */ -#define PHY_INT_POL_CNG 0x0800 /* Polarity of any channel changed */ -#define PHY_INT_MDIX_CNG 0x1000 /* MDIX changed. A pair swap occurred. */ -#define PHY_INT_DPLX_CNG 0x2000 /* Duplex changed */ -#define PHY_INT_LNK_CNG 0x4000 /* Link changed (asserted when a link is established or broken) */ -#define PHY_INT_SPD_CNG 0x8000 /* Speed changed */ - -#endif /* INCLUDED_ETH_PHY_H */ diff --git a/firmware/microblaze/lib/ethernet.c b/firmware/microblaze/lib/ethernet.c deleted file mode 100644 index 34a3ad7c1..000000000 --- a/firmware/microblaze/lib/ethernet.c +++ /dev/null @@ -1,390 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "ethernet.h" -#include "memory_map.h" -#include "eth_phy.h" -#include "eth_mac.h" -#include "eth_mac_regs.h" -#include "pic.h" -#include "hal_io.h" -#include "nonstdio.h" -#include -#include "i2c.h" -#include "usrp2_i2c_addr.h" - - -#define VERBOSE 0 - -static ethernet_t ed_state; -static ethernet_link_changed_callback_t ed_callback = 0; - -void -ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback) -{ - ed_callback = new_callback; -} - - -static void -ed_set_mac_speed(int speed) -{ - printf("Speed set to %d\n",speed); - /* - switch(speed){ - case 10: - eth_mac->speed = 1; - break; - case 100: - eth_mac->speed = 2; - break; - case 1000: - eth_mac->speed = 4; - break; - default: - break; - } - */ -} - -static void -ed_link_up(int speed) -{ - // putstr("ed_link_up: "); puthex16_nl(speed); - - ed_set_mac_speed(speed); - - if (ed_callback) // fire link changed callback - (*ed_callback)(speed); -} - -static void -ed_link_down(void) -{ - // putstr("ed_link_down\n"); - - if (ed_callback) // fire link changed callback - (*ed_callback)(0); -} - - -static void -ed_link_speed_change(int speed) -{ - ed_link_down(); - ed_link_up(speed); -} - -static void -print_flow_control(int flow_control) -{ - static const char *flow_control_msg[4] = { - "NONE", "WE_TX", "WE_RX", "SYMMETRIC" - }; - putstr("ethernet flow control: "); - puts(flow_control_msg[flow_control & 0x3]); -} - -static void -check_flow_control_resolution(void) -{ - static const unsigned char table[16] = { - // index = {local_asm, local_pause, partner_asm, partner_pause} - FC_NONE, FC_NONE, FC_NONE, FC_NONE, - FC_NONE, FC_SYMM, FC_NONE, FC_SYMM, - FC_NONE, FC_NONE, FC_NONE, FC_WE_TX, - FC_NONE, FC_SYMM, FC_WE_RX, FC_SYMM - }; - - int us = eth_mac_miim_read(PHY_AUTONEG_ADV); - int lp = eth_mac_miim_read(PHY_LP_ABILITY); - int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3); - ed_state.flow_control = table[index]; - - if (1) - print_flow_control(ed_state.flow_control); -} - -/* - * Read the PHY state register to determine link state and speed - */ -static void -ed_check_phy_state(void) -{ - int lansr = eth_mac_miim_read(PHY_LINK_AN); - eth_link_state_t new_state = LS_UNKNOWN; - int new_speed = S_UNKNOWN; - - if (VERBOSE){ - putstr("LANSR: "); - puthex16_nl(lansr); - } - - if (lansr & LANSR_LINK_GOOD){ // link's up - if (VERBOSE) - puts(" LINK_GOOD"); - - new_state = LS_UP; - switch (lansr & LANSR_SPEED_MASK){ - case LANSR_SPEED_10: - new_speed = 10; - break; - - case LANSR_SPEED_100: - new_speed = 100; - break; - - case LANSR_SPEED_1000: - new_speed = 1000; - break; - - default: - new_speed = S_UNKNOWN; - break; - } - - check_flow_control_resolution(); - } - else { // link's down - if (VERBOSE) - puts(" NOT LINK_GOOD"); - - new_state = LS_DOWN; - new_speed = S_UNKNOWN; - } - - if (new_state != ed_state.link_state){ - ed_state.link_state = new_state; // remember new state - if (new_state == LS_UP) - ed_link_up(new_speed); - else if (new_state == LS_DOWN) - ed_link_down(); - } - else if (new_state == LS_UP && new_speed != ed_state.link_speed){ - ed_state.link_speed = new_speed; // remember new speed - ed_link_speed_change(new_speed); - } -} - -/* - * This is fired when the ethernet PHY state changes - */ -static void -eth_phy_irq_handler(unsigned irq) -{ - ed_check_phy_state(); - eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all ints -} - -void -ethernet_init(void) -{ - eth_mac_init(ethernet_mac_addr()); - - ed_state.link_state = LS_UNKNOWN; - ed_state.link_speed = S_UNKNOWN; - - // initialize MAC registers - // eth_mac->tx_hwmark = 0x1e; - //eth_mac->tx_lwmark = 0x19; - - //eth_mac->crc_chk_en = 1; - //eth_mac->rx_max_length = 2048; - - // configure PAUSE frame stuff - //eth_mac->tx_pause_en = 1; // pay attn to pause frames sent to us - - //eth_mac->pause_quanta_set = 38; // a bit more than 1 max frame 16kb/512 + fudge - //eth_mac->pause_frame_send_en = 1; // enable sending pause frames - - - // setup PHY to interrupt on changes - - unsigned mask = - (PHY_INT_AN_CMPL // auto-neg completed - | PHY_INT_NO_LINK // no link after auto-neg - | PHY_INT_NO_HCD // no highest common denominator - | PHY_INT_MAS_SLA_ERR // couldn't resolve master/slave - | PHY_INT_PRL_DET_FLT // parallel detection fault - | PHY_INT_LNK_CNG // link established or broken - | PHY_INT_SPD_CNG // speed changed - ); - - eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all pending interrupts - eth_mac_miim_write(PHY_INT_MASK, mask); // enable the ones we want - - pic_register_handler(IRQ_PHY, eth_phy_irq_handler); - - // Advertise our flow control configuation. - // - // We and the link partner each specify two bits in the base page - // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR. - // The bits say what a device is "willing" to do, not what may actually - // happen as a result of the negotiation. There are 4 cases: - // - // PAUSE ASM_DIR - // - // 0 0 I have no flow control capability. - // - // 1 0 I both assert and respond to flow control. - // - // 0 1 I assert flow control, but cannot respond. That is, - // I want to be able to send PAUSE frames, but will ignore any - // you send to me. (This is our configuration.) - // - // 1 1 I can both assert and respond to flow control AND I am willing - // to operate symmetrically OR asymmetrically in EITHER direction. - // (We hope the link partner advertises this, otherwise we don't - // get what we want.) - - int t = eth_mac_miim_read(PHY_AUTONEG_ADV); - t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR); - t |= NWAY_AR_ASM_DIR; - - // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex - t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS); - - eth_mac_miim_write(PHY_AUTONEG_ADV, t); - int r = eth_mac_miim_read(PHY_AUTONEG_ADV); // DEBUG, read back - if (t != r){ - printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r); - } - - // Restart autonegotation. - // We want to ensure that we're advertising our PAUSE capabilities. - t = eth_mac_miim_read(PHY_CTRL); - eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG); -} - -static bool -unprogrammed(const void *t, size_t len) -{ - int i; - uint8_t *p = (uint8_t *)t; - bool all_zeros = true; - bool all_ones = true; - for (i = 0; i < len; i++){ - all_zeros &= p[i] == 0x00; - all_ones &= p[i] == 0xff; - } - return all_ones | all_zeros; -} - -//////////////////// MAC Addr Stuff /////////////////////// - -static int8_t src_mac_addr_initialized = false; -static eth_mac_addr_t src_mac_addr = {{ - 0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff - }}; - -const eth_mac_addr_t * -ethernet_mac_addr(void) -{ - if (!src_mac_addr_initialized){ // fetch from eeprom - src_mac_addr_initialized = true; - - // if we're simulating, don't read the EEPROM model, it's REALLY slow - if (hwconfig_simulation_p()) - return &src_mac_addr; - - eth_mac_addr_t tmp; - bool ok = eeprom_read(I2C_ADDR_MBOARD, MBOARD_MAC_ADDR, &tmp, sizeof(tmp)); - if (!ok || unprogrammed(&tmp, sizeof(tmp))){ - // use the default - } - else - src_mac_addr = tmp; - } - - return &src_mac_addr; -} - -bool -ethernet_set_mac_addr(const eth_mac_addr_t *t) -{ - bool ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_MAC_ADDR, t, sizeof(eth_mac_addr_t)); - if (ok){ - src_mac_addr = *t; - src_mac_addr_initialized = true; - //eth_mac_set_addr(t); //this breaks the link - } - - return ok; -} - -//////////////////// IP Addr Stuff /////////////////////// - -static int8_t src_ip_addr_initialized = false; -static struct ip_addr src_ip_addr = { - (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0) -}; - - -const struct ip_addr *get_ip_addr(void) -{ - if (!src_ip_addr_initialized){ // fetch from eeprom - src_ip_addr_initialized = true; - - // if we're simulating, don't read the EEPROM model, it's REALLY slow - if (hwconfig_simulation_p()) - return &src_ip_addr; - - struct ip_addr tmp; - bool ok = eeprom_read(I2C_ADDR_MBOARD, MBOARD_IP_ADDR, &tmp, sizeof(tmp)); - if (!ok || unprogrammed(&tmp, sizeof(tmp))){ - // use the default - } - else - src_ip_addr = tmp; - } - - return &src_ip_addr; -} - -bool set_ip_addr(const struct ip_addr *t){ - bool ok = eeprom_write(I2C_ADDR_MBOARD, MBOARD_IP_ADDR, t, sizeof(struct ip_addr)); - if (ok){ - src_ip_addr = *t; - src_ip_addr_initialized = true; - } - - return ok; -} - -int -ethernet_check_errors(void) -{ - // these registers are reset when read - - int r = 0; - /* - if (eth_mac_read_rmon(0x05) != 0) - r |= RME_RX_CRC; - if (eth_mac_read_rmon(0x06) != 0) - r |= RME_RX_FIFO_FULL; - if (eth_mac_read_rmon(0x07) != 0) - r |= RME_RX_2SHORT_2LONG; - - if (eth_mac_read_rmon(0x25) != 0) - r |= RME_TX_JAM_DROP; - if (eth_mac_read_rmon(0x26) != 0) - r |= RME_TX_FIFO_UNDER; - if (eth_mac_read_rmon(0x27) != 0) - r |= RME_TX_FIFO_OVER; - */ - return r; -} diff --git a/firmware/microblaze/lib/hal_io.c b/firmware/microblaze/lib/hal_io.c index 0afd6a2cc..58b1e681e 100644 --- a/firmware/microblaze/lib/hal_io.c +++ b/firmware/microblaze/lib/hal_io.c @@ -193,3 +193,13 @@ puts(const char *s) putchar('\n'); return 0; } + +char * +gets(char * const s) +{ + char *x = s; + while((*x=(char)hal_uart_getc()) != '\n') x++; + *x = 0; + return s; +} + diff --git a/firmware/microblaze/lib/hal_io.h b/firmware/microblaze/lib/hal_io.h index d8967f063..c67d96c62 100644 --- a/firmware/microblaze/lib/hal_io.h +++ b/firmware/microblaze/lib/hal_io.h @@ -23,6 +23,7 @@ void hal_io_init(void); void hal_finish(); +char *gets(char * const s); /* * ------------------------------------------------------------------------ diff --git a/firmware/microblaze/lib/hal_uart.c b/firmware/microblaze/lib/hal_uart.c index 75b12b432..fe3b7515a 100644 --- a/firmware/microblaze/lib/hal_uart.c +++ b/firmware/microblaze/lib/hal_uart.c @@ -39,16 +39,25 @@ divisor_table[MAX_WB_DIV+1][NSPEEDS] = { #define u uart_regs +static char uart_mode = UART_MODE_ONLCR; + +void +hal_uart_set_mode(int mode) +{ + uart_mode = mode; +} + void hal_uart_init(void) { + hal_uart_set_mode(UART_MODE_ONLCR); u->clkdiv = 217; // 230400 bps } void hal_uart_putc(int ch) { - if (ch == '\n') // FIXME for now map \n -> \r\n + if (ch == '\n')// && (uart_mode == UART_MODE_ONLCR)) //map \n->\r\n if necessary hal_uart_putc('\r'); while (u->txlevel == 0) // wait for fifo to have space @@ -60,7 +69,7 @@ hal_uart_putc(int ch) void hal_uart_putc_nowait(int ch) { - if (ch == '\n') // FIXME for now map \n -> \r\n + if (ch == '\n')// && (uart_mode == UART_MODE_ONLCR)) //map \n->\r\n if necessary hal_uart_putc('\r'); if(u->txlevel) // If fifo has space diff --git a/firmware/microblaze/lib/hal_uart.h b/firmware/microblaze/lib/hal_uart.h index 2ddfa6259..dfd73c323 100644 --- a/firmware/microblaze/lib/hal_uart.h +++ b/firmware/microblaze/lib/hal_uart.h @@ -19,6 +19,16 @@ #ifndef INCLUDED_HAL_UART_H #define INCLUDED_HAL_UART_H +/*! + * \brief uart mode flags + */ +#define UART_MODE_RAW 0x0000 // no mapping on input or output +#define UART_MODE_ONLCR 0x0001 // map \n to \r\n on output (default) + +/* + * \brief Set uart mode + */ +void hal_uart_set_mode(int flags); /*! * \brief one-time call to init diff --git a/firmware/microblaze/lib/memory_map.h b/firmware/microblaze/lib/memory_map.h deleted file mode 100644 index cdf3dd338..000000000 --- a/firmware/microblaze/lib/memory_map.h +++ /dev/null @@ -1,792 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2007,2008,2009 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* Overall Memory Map - * 0000-7FFF 32K RAM space (16K on 1500, 24K on 2000, 32K on DSP) - * 8000-BFFF 16K Buffer Pool - * C000-FFFF 16K Peripherals - */ - - -#ifndef INCLUDED_MEMORY_MAP_H -#define INCLUDED_MEMORY_MAP_H - -#include - - -#define MASTER_CLK_RATE 100000000 // 100 MHz - - -//////////////////////////////////////////////////////////////// -// -// Memory map for embedded wishbone bus -// -//////////////////////////////////////////////////////////////// - - -//////////////////////////////////////////////////////////////// -// Main RAM, Slave 0 - -#define RAM_BASE 0x0000 - -//////////////////////////////////////////////////////////////// -// Buffer Pool RAM, Slave 1 -// -// The buffers themselves are located in Slave 1, Buffer Pool RAM. -// The status registers are in Slave 5, Buffer Pool Status. -// The control register is in Slave 7, Settings Bus. - -#define BUFFER_POOL_RAM_BASE 0x8000 - -#define NBUFFERS 8 -#define BP_NLINES 0x0200 // number of 32-bit lines in a buffer -#define BP_LAST_LINE (BP_NLINES - 1) // last line in a buffer - -#define buffer_pool_ram \ - ((uint32_t *) BUFFER_POOL_RAM_BASE) - -#define buffer_ram(n) (&buffer_pool_ram[(n) * BP_NLINES]) - - -///////////////////////////////////////////////////// -// SPI Core, Slave 2. See core docs for more info -#define SPI_BASE 0xC000 // Base address (16-bit) - -typedef struct { - volatile uint32_t txrx0; - volatile uint32_t txrx1; - volatile uint32_t txrx2; - volatile uint32_t txrx3; - volatile uint32_t ctrl; - volatile uint32_t div; - volatile uint32_t ss; -} spi_regs_t; - -#define spi_regs ((spi_regs_t *) SPI_BASE) - - -// Masks for controlling different peripherals -#define SPI_SS_AD9510 1 -#define SPI_SS_AD9777 2 -#define SPI_SS_RX_DAC 4 -#define SPI_SS_RX_ADC 8 -#define SPI_SS_RX_DB 16 -#define SPI_SS_TX_DAC 32 -#define SPI_SS_TX_ADC 64 -#define SPI_SS_TX_DB 128 - -// Masks for different parts of CTRL reg -#define SPI_CTRL_ASS (1<<13) -#define SPI_CTRL_IE (1<<12) -#define SPI_CTRL_LSB (1<<11) -#define SPI_CTRL_TXNEG (1<<10) -#define SPI_CTRL_RXNEG (1<< 9) -#define SPI_CTRL_GO_BSY (1<< 8) -#define SPI_CTRL_CHAR_LEN_MASK 0x7F - -//////////////////////////////////////////////// -// I2C, Slave 3 -// See Wishbone I2C-Master Core Specification. - -#define I2C_BASE 0xC400 - -typedef struct { - volatile uint32_t prescaler_lo; // r/w - volatile uint32_t prescaler_hi; // r/w - volatile uint32_t ctrl; // r/w - volatile uint32_t data; // wr = transmit reg; rd = receive reg - volatile uint32_t cmd_status; // wr = command reg; rd = status reg -} i2c_regs_t; - -#define i2c_regs ((i2c_regs_t *) I2C_BASE) - -#define I2C_CTRL_EN (1 << 7) // core enable -#define I2C_CTRL_IE (1 << 6) // interrupt enable - -// -// STA, STO, RD, WR, and IACK bits are cleared automatically -// -#define I2C_CMD_START (1 << 7) // generate (repeated) start condition -#define I2C_CMD_STOP (1 << 6) // generate stop condition -#define I2C_CMD_RD (1 << 5) // read from slave -#define I2C_CMD_WR (1 << 4) // write to slave -#define I2C_CMD_NACK (1 << 3) // when a rcvr, send ACK (ACK=0) or NACK (ACK=1) -#define I2C_CMD_RSVD_2 (1 << 2) // reserved -#define I2C_CMD_RSVD_1 (1 << 1) // reserved -#define I2C_CMD_IACK (1 << 0) // set to clear pending interrupt - -#define I2C_ST_RXACK (1 << 7) // Received acknowledgement from slave (1 = NAK, 0 = ACK) -#define I2C_ST_BUSY (1 << 6) // 1 after START signal detected; 0 after STOP signal detected -#define I2C_ST_AL (1 << 5) // Arbitration lost. 1 when core lost arbitration -#define I2C_ST_RSVD_4 (1 << 4) // reserved -#define I2C_ST_RSVD_3 (1 << 3) // reserved -#define I2C_ST_RSVD_2 (1 << 2) // reserved -#define I2C_ST_TIP (1 << 1) // Transfer-in-progress -#define I2C_ST_IP (1 << 0) // Interrupt pending - - -//////////////////////////////////////////////// -// GPIO, Slave 4 -// -// These go to the daughterboard i/o pins - -#define GPIO_BASE 0xC800 - -typedef struct { - volatile uint32_t io; // tx data in high 16, rx in low 16 - volatile uint32_t ddr; // 32 bits, 1 means output. tx in high 16, rx in low 16 - volatile uint32_t tx_sel; // 16 2-bit fields select which source goes to TX DB - volatile uint32_t rx_sel; // 16 2-bit fields select which source goes to RX DB -} gpio_regs_t; - -// each 2-bit sel field is layed out this way -#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg -#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic -#define GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric -#define GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric - -#define gpio_base ((gpio_regs_t *) GPIO_BASE) - -/////////////////////////////////////////////////// -// Buffer Pool Status, Slave 5 -// -// The buffers themselves are located in Slave 1, Buffer Pool RAM. -// The status registers are in Slave 5, Buffer Pool Status. -// The control register is in Slave 7, Settings Bus. - -#define BUFFER_POOL_STATUS_BASE 0xCC00 - -typedef struct { - volatile uint32_t last_line[NBUFFERS]; // last line xfer'd in buffer - volatile uint32_t status; // error and done flags - volatile uint32_t hw_config; // see below - volatile uint32_t dummy[3]; - volatile uint32_t irqs; - volatile uint32_t pri_enc_bp_status; - volatile uint32_t cycle_count; -} buffer_pool_status_t; - -#define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE) - -/* - * Buffer n's xfer is done. - * Clear this bit by issuing bp_clear_buf(n) - */ -#define BPS_DONE(n) (0x00000001 << (n)) -#define BPS_DONE_0 BPS_DONE(0) -#define BPS_DONE_1 BPS_DONE(1) -#define BPS_DONE_2 BPS_DONE(2) -#define BPS_DONE_3 BPS_DONE(3) -#define BPS_DONE_4 BPS_DONE(4) -#define BPS_DONE_5 BPS_DONE(5) -#define BPS_DONE_6 BPS_DONE(6) -#define BPS_DONE_7 BPS_DONE(7) - -/* - * Buffer n's xfer had an error. - * Clear this bit by issuing bp_clear_buf(n) - */ -#define BPS_ERROR(n) (0x00000100 << (n)) -#define BPS_ERROR_0 BPS_ERROR(0) -#define BPS_ERROR_1 BPS_ERROR(1) -#define BPS_ERROR_2 BPS_ERROR(2) -#define BPS_ERROR_3 BPS_ERROR(3) -#define BPS_ERROR_4 BPS_ERROR(4) -#define BPS_ERROR_5 BPS_ERROR(5) -#define BPS_ERROR_6 BPS_ERROR(6) -#define BPS_ERROR_7 BPS_ERROR(7) - -/* - * Buffer n is idle. A buffer is idle if it's not - * DONE, ERROR, or processing a transaction. If it's - * IDLE, it's safe to start a new transaction. - * - * Clear this bit by starting a xfer with - * bp_send_from_buf or bp_receive_to_buf. - */ -#define BPS_IDLE(n) (0x00010000 << (n)) -#define BPS_IDLE_0 BPS_IDLE(0) -#define BPS_IDLE_1 BPS_IDLE(1) -#define BPS_IDLE_2 BPS_IDLE(2) -#define BPS_IDLE_3 BPS_IDLE(3) -#define BPS_IDLE_4 BPS_IDLE(4) -#define BPS_IDLE_5 BPS_IDLE(5) -#define BPS_IDLE_6 BPS_IDLE(6) -#define BPS_IDLE_7 BPS_IDLE(7) - -/* - * Buffer n has a "slow path" packet in it. - * This bit is orthogonal to the bits above and indicates that - * the FPGA ethernet rx protocol engine has identified this packet - * as one requiring firmware intervention. - */ -#define BPS_SLOWPATH(n) (0x01000000 << (n)) -#define BPS_SLOWPATH_0 BPS_SLOWPATH(0) -#define BPS_SLOWPATH_1 BPS_SLOWPATH(1) -#define BPS_SLOWPATH_2 BPS_SLOWPATH(2) -#define BPS_SLOWPATH_3 BPS_SLOWPATH(3) -#define BPS_SLOWPATH_4 BPS_SLOWPATH(4) -#define BPS_SLOWPATH_5 BPS_SLOWPATH(5) -#define BPS_SLOWPATH_6 BPS_SLOWPATH(6) -#define BPS_SLOWPATH_7 BPS_SLOWPATH(7) - - -#define BPS_DONE_ALL 0x000000ff // mask of all dones -#define BPS_ERROR_ALL 0x0000ff00 // mask of all errors -#define BPS_IDLE_ALL 0x00ff0000 // mask of all idles -#define BPS_SLOWPATH_ALL 0xff000000 // mask of all slowpaths - -// The hw_config register - -#define HWC_SIMULATION 0x80000000 -#define HWC_WB_CLK_DIV_MASK 0x0000000f - -/*! - * \brief return non-zero if we're running under the simulator - */ -inline static int -hwconfig_simulation_p(void) -{ - return buffer_pool_status->hw_config & HWC_SIMULATION; -} - -/*! - * \brief Return Wishbone Clock divisor. - * The processor runs at the Wishbone Clock rate which is MASTER_CLK_RATE / divisor. - */ -inline static int -hwconfig_wishbone_divisor(void) -{ - return buffer_pool_status->hw_config & HWC_WB_CLK_DIV_MASK; -} - -/////////////////////////////////////////////////// -// Ethernet Core, Slave 6 - -#define ETH_BASE 0xD000 - -#include "eth_mac_regs.h" - -#define eth_mac ((eth_mac_regs_t *) ETH_BASE) - -//////////////////////////////////////////////////// -// Settings Bus, Slave #7, Not Byte Addressable! -// -// Output-only from processor point-of-view. -// 1KB of address space (== 256 32-bit write-only regs) - - -#define MISC_OUTPUT_BASE 0xD400 -#define TX_PROTOCOL_ENGINE_BASE 0xD480 -#define RX_PROTOCOL_ENGINE_BASE 0xD4C0 -#define BUFFER_POOL_CTRL_BASE 0xD500 -#define LAST_SETTING_REG 0xD7FC // last valid setting register - -#define SR_MISC 0 -#define SR_TX_PROT_ENG 32 -#define SR_RX_PROT_ENG 48 -#define SR_BUFFER_POOL_CTRL 64 -#define SR_UDP_SM 96 -#define SR_TX_DSP 208 -#define SR_TX_CTRL 224 -#define SR_RX_DSP 160 -#define SR_RX_CTRL 176 -#define SR_TIME64 192 -#define SR_SIMTIMER 198 -#define SR_LAST 255 - -#define _SR_ADDR(sr) (MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t)) - -// --- buffer pool control regs --- - -typedef struct { - volatile uint32_t ctrl; -} buffer_pool_ctrl_t; - -// buffer pool ports - -#define PORT_SERDES 0 // serial/deserializer -#define PORT_DSP 1 // DSP tx or rx pipeline -#define PORT_ETH 2 // ethernet tx or rx -#define PORT_RAM 3 // RAM tx or rx - -// the buffer pool ctrl register fields - -#define BPC_BUFFER(n) (((n) & 0xf) << 28) -#define BPC_BUFFER_MASK BPC_BUFFER(~0) -#define BPC_BUFFER_0 BPC_BUFFER(0) -#define BPC_BUFFER_1 BPC_BUFFER(1) -#define BPC_BUFFER_2 BPC_BUFFER(2) -#define BPC_BUFFER_3 BPC_BUFFER(3) -#define BPC_BUFFER_4 BPC_BUFFER(4) -#define BPC_BUFFER_5 BPC_BUFFER(5) -#define BPC_BUFFER_6 BPC_BUFFER(6) -#define BPC_BUFFER_7 BPC_BUFFER(7) -#define BPC_BUFFER_NIL BPC_BUFFER(0x8) // disable - -#define BPC_PORT(n) (((n) & 0x7) << 25) -#define BPC_PORT_MASK BPC_PORT(~0) -#define BPC_PORT_SERDES BPC_PORT(PORT_SERDES) -#define BPC_PORT_DSP BPC_PORT(PORT_DSP) -#define BPC_PORT_ETH BPC_PORT(PORT_ETH) -#define BPC_PORT_RAM BPC_PORT(PORT_RAM) -#define BPC_PORT_NIL BPC_PORT(0x4) // disable - -#define BPC_CLR (1 << 24) // mutually excl commands -#define BPC_READ (1 << 23) -#define BPC_WRITE (1 << 22) - -#define BPC_STEP(step) (((step) & 0xf) << 18) -#define BPC_STEP_MASK BPC_STEP(~0) -#define BPC_LAST_LINE(line) (((line) & 0x1ff) << 9) -#define BPC_LAST_LINE_MASK BPC_LAST_LINE(~0) -#define BPC_FIRST_LINE(line) (((line) & 0x1ff) << 0) -#define BPC_FIRST_LINE_MASK BPC_FIRST_LINE(~0) - -#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) BUFFER_POOL_CTRL_BASE) - -// --- misc outputs --- - -typedef struct { - volatile uint32_t clk_ctrl; - volatile uint32_t serdes_ctrl; - volatile uint32_t adc_ctrl; - volatile uint32_t leds; - volatile uint32_t phy_ctrl; // LSB is reset line to eth phy - volatile uint32_t debug_mux_ctrl; - volatile uint32_t ram_page; // FIXME should go somewhere else... - volatile uint32_t flush_icache; // Flush the icache - volatile uint32_t led_src; // HW or SW control for LEDs -} output_regs_t; - -#define SERDES_ENABLE 8 -#define SERDES_PRBSEN 4 -#define SERDES_LOOPEN 2 -#define SERDES_RXEN 1 - -#define ADC_CTRL_ON 0x0F -#define ADC_CTRL_OFF 0x00 - -// crazy order that matches the labels on the case - -#define LED_A (1 << 4) -#define LED_B (1 << 1) -#define LED_C (1 << 3) -#define LED_D (1 << 0) -#define LED_E (1 << 2) -// LED_F // controlled by CPLD -#define LED_RJ45 (1 << 5) - -#define output_regs ((output_regs_t *) MISC_OUTPUT_BASE) - -// --- udp tx regs --- - -typedef struct { - // Bits 19:16 are control info; bits 15:0 are data (see below) - // First two words are unused. - volatile uint32_t _nope[2]; - //--- ethernet header - 14 bytes--- - volatile struct{ - uint32_t mac_dst_0_1; //word 2 - uint32_t mac_dst_2_3; - uint32_t mac_dst_4_5; - uint32_t mac_src_0_1; - uint32_t mac_src_2_3; - uint32_t mac_src_4_5; - uint32_t ether_type; //word 8 - } eth_hdr; - //--- ip header - 20 bytes --- - volatile struct{ - uint32_t ver_ihl_tos; //word 9 - uint32_t total_length; - uint32_t identification; - uint32_t flags_frag_off; - uint32_t ttl_proto; - uint32_t checksum; - uint32_t src_addr_high; - uint32_t src_addr_low; - uint32_t dst_addr_high; - uint32_t dst_addr_low; //word 18 - } ip_hdr; - //--- udp header - 8 bytes --- - volatile struct{ - uint32_t src_port; //word 19 - uint32_t dst_port; - uint32_t length; - uint32_t checksum; //word 22 - } udp_hdr; - volatile uint32_t _pad[32-23]; -} sr_udp_sm_t; - -// control bits (all expect UDP_SM_LAST_WORD are mutually exclusive) - -// This is the last word of the header -#define UDP_SM_LAST_WORD (1 << 19) - -// Insert IP header checksum here. Data is the xor of 16'hFFFF and -// the values written into regs 9-13 and 15-18. -#define UDP_SM_INS_IP_HDR_CHKSUM (1 << 18) - -// Insert IP Length here (data ignored) -#define UDP_SM_INS_IP_LEN (1 << 17) - -// Insert UDP Length here (data ignore) -#define UDP_SM_INS_UDP_LEN (1 << 16) - -#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM)) - -// --- dsp tx regs --- - -#define MIN_CIC_INTERP 1 -#define MAX_CIC_INTERP 128 - -typedef struct { - volatile uint32_t num_chan; - volatile uint32_t clear_state; // clears out state machine, fifos, -} sr_tx_ctrl_t; - -#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL)) - -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t interp_rate; - volatile uint32_t _padding0; // padding for the tx_mux - // NOT freq, scale, interp - /*! - * \brief output mux configuration. - * - * 
-   *     3                   2                   1                       
-   *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-   *  +-------------------------------+-------+-------+-------+-------+
-   *  |                                               | DAC1  |  DAC0 |
-   *  +-------------------------------+-------+-------+-------+-------+
-   * 
-   *  There are N DUCs (1 now) with complex inputs and outputs.
-   *  There are two DACs.
-   * 
-   *  Each 4-bit DACx field specifies the source for the DAC
-   *  Each subfield is coded like this: 
-   * 
-   *     3 2 1 0
-   *    +-------+
-   *    |   N   |
-   *    +-------+
-   * 
-   *  N specifies which DUC output is connected to this DAC.
-   * 
-   *   N   which interp output
-   *  ---  -------------------
-   *   0   DUC 0 I
-   *   1   DUC 0 Q
-   *   2   DUC 1 I
-   *   3   DUC 1 Q
-   *   F   All Zeros
-   *   
-   * The default value is 0x10
-   *
- */ - volatile uint32_t tx_mux; - -} dsp_tx_regs_t; - -#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP)) - -// --- VITA RX CTRL regs --- -typedef struct { - // The following 3 are logically a single command register. - // They are clocked into the underlying fifo when time_ticks is written. - volatile uint32_t cmd; // {now, chain, num_samples(30) - volatile uint32_t time_secs; - volatile uint32_t time_ticks; - - volatile uint32_t clear_overrun; // write anything to clear overrun - volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter - volatile uint32_t vrt_stream_id; // word 1 of packet. - volatile uint32_t vrt_trailer; - volatile uint32_t nsamples_per_pkt; - volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources - volatile uint32_t pad[7]; // Make each structure 16 elements long -} sr_rx_ctrl_t; - -#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) - -// --- dsp rx regs --- -#define MIN_CIC_DECIM 1 -#define MAX_CIC_DECIM 128 - -typedef struct { - volatile int32_t freq; - volatile uint32_t scale_iq; // {scale_i,scale_q} - volatile uint32_t decim_rate; - volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits, - // otherwise it is automatic - volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits - - /*! - * \brief input mux configuration. - * - * This determines which ADC (or constant zero) is connected to - * each DDC input. There are N DDCs (1 now). Each has two inputs. - * - * 
-   * Mux value:
-   *
-   *    3                   2                   1                       
-   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-   * +-------+-------+-------+-------+-------+-------+-------+-------+
-   * |                                                       |Q0 |I0 |
-   * +-------+-------+-------+-------+-------+-------+-------+-------+
-   *
-   * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
-   * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
-   *
-   * The default value is 0x4
-   *
- */ - volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v - - /*! - * \brief Streaming GPIO configuration - * - * This determines whether the LSBs of I and Q samples come from the DSP - * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first - * set the GPIO data direction register to have io_rx[15] and/or io_rx[14] - * configured as inputs. The GPIO pins will be sampled at the time the - * remainder of the DSP sample is strobed into the RX sample FIFO. There - * will be a decimation-dependent fixed time offset between the GPIO - * sample stream and the associated RF samples. - * - * 3 2 1 - * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * | MBZ |Q|I| - * +-------+-------+-------+-------+-------+-------+-------+-------+ - * - * I 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[15] - * - * Q 0=LSB comes from DSP pipeline (default) - * 1=LSB comes from io_rx[14] - */ - volatile uint32_t gpio_stream_enable; - -} dsp_rx_regs_t; - -#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP)) - -// ---------------------------------------------------------------- -// VITA49 64 bit time (write only) - /*! - * \brief Time 64 flags - * - * 
-   *
-   *    3                   2                   1                       
-   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
-   * +-----------------------------------------------------------+-+-+
-   * |                                                           |S|P|
-   * +-----------------------------------------------------------+-+-+
-   *
-   * P - PPS edge selection (0=negedge, 1=posedge, default=0)
-   * S - Source (0=sma, 1=mimo, 0=default)
-   *
-   *
- */ -typedef struct { - volatile uint32_t secs; // value to set absolute secs to on next PPS - volatile uint32_t ticks; // value to set absolute ticks to on next PPS - volatile uint32_t flags; // flags - see chart above - volatile uint32_t imm; // set immediate (0=latch on next pps, 1=latch immediate, default=0) -} sr_time64_t; - -#define sr_time64 ((sr_time64_t *) _SR_ADDR(SR_TIME64)) - - -/* - * --- ethernet tx protocol engine regs (write only) --- - * - * These registers control the transmit portion of the ethernet - * protocol engine (out of USRP2). The protocol engine handles fifo - * status and sequence number insertion in outgoing packets, and - * automagically generates status packets when required to inform the - * host of changes in fifo availability. - * - * All outgoing packets have their fifo_status field set to the number - * of 32-bit lines of fifo available in the ethernet Rx fifo (see - * usrp2_eth_packet.h). Seqno's are set if FIXME, else 0. - * - * FIXME clean this up once we know how it's supposed to behave. - */ - -typedef struct { - volatile uint32_t flags; // not yet fully defined (channel?) - volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr - volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr - volatile uint32_t mac_src2345; // 4 bytes of destination mac addr - volatile uint32_t seqno; // Write to init seqno. It autoincs on match -} tx_proto_engine_regs_t; - -#define tx_proto_engine ((tx_proto_engine_regs_t *) TX_PROTOCOL_ENGINE_BASE) - -/* - * --- ethernet rx protocol engine regs (write only) --- - * - * These registers control the receive portion of the ethernet - * protocol engine (into USRP2). The protocol engine offloads common - * packet inspection operations so that firmware has less to do on - * "fast path" packets. - * - * The registers define conditions which must be matched for a packet - * to be considered a "fast path" packet. If a received packet - * matches the src and dst mac address, ethertype, flags field, and - * expected seqno number it is considered a "fast path" packet, and - * the expected seqno is updated. If the packet fails to satisfy any - * of the above conditions it's a "slow path" packet, and the - * corresponding SLOWPATH flag will be set buffer_status register. - */ - -typedef struct { - volatile uint32_t flags; // not yet fully defined (channel?) - volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr - volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr - volatile uint32_t mac_src2345; // 4 bytes of destination mac addr - volatile uint32_t ethertype_pad; // ethertype in high 16-bits -} rx_proto_engine_regs_t; - -#define rx_proto_engine ((rx_proto_engine_regs_t *) RX_PROTOCOL_ENGINE_BASE) - - - -/////////////////////////////////////////////////// -// Simple Programmable Interrupt Controller, Slave 8 - -#define PIC_BASE 0xD800 - -// Interrupt request lines -// Bit numbers (LSB == 0) that correpond to interrupts into PIC - -#define IRQ_BUFFER 0 // buffer manager -#define IRQ_ONETIME 1 -#define IRQ_SPI 2 -#define IRQ_I2C 3 -#define IRQ_PHY 4 // ethernet PHY -#define IRQ_UNDERRUN 5 -#define IRQ_OVERRUN 6 -#define IRQ_PPS 7 // pulse per second -#define IRQ_UART_RX 8 -#define IRQ_UART_TX 9 -#define IRQ_SERDES 10 -#define IRQ_CLKSTATUS 11 -#define IRQ_PERIODIC 12 - -#define IRQ_TO_MASK(x) (1 << (x)) - -#define PIC_BUFFER_INT IRQ_TO_MASK(IRQ_BUFFER) -#define PIC_ONETIME_INT IRQ_TO_MASK(IRQ_ONETIME) -#define PIC_SPI_INT IRQ_TO_MASK(IRQ_SPI) -#define PIC_I2C_INT IRQ_TO_MASK(IRQ_I2C) -#define PIC_PHY_INT IRQ_TO_MASK(IRQ_PHY) -#define PIC_UNDERRUN_INT IRQ_TO_MASK(IRQ_UNDERRUN) -#define PIC_OVERRUN_INT IRQ_TO_MASK(IRQ_OVERRUN) -#define PIC_PPS_INT IRQ_TO_MASK(IRQ_PPS) -#define PIC_UART_RX_INT IRQ_TO_MASK(IRQ_UART_RX) -#define PIC_UART_TX_INT IRQ_TO_MASK(IRQ_UART_TX) -#define PIC_SERDES IRQ_TO_MASK(IRQ_SERDES) -#define PIC_CLKSTATUS IRQ_TO_MASK(IRQ_CLKSTATUS) - -typedef struct { - volatile uint32_t edge_enable; // mask: 1 -> edge triggered, 0 -> level - volatile uint32_t polarity; // mask: 1 -> rising edge - volatile uint32_t mask; // mask: 1 -> disabled - volatile uint32_t pending; // mask: 1 -> pending; write 1's to clear pending ints -} pic_regs_t; - -#define pic_regs ((pic_regs_t *) PIC_BASE) - -// ---------------------------------------------------------------- -// WB_CLK_RATE is the time base for this -typedef struct { - volatile uint32_t onetime; // Number of wb clk cycles till the onetime interrupt - volatile uint32_t periodic; // Repeat rate of periodic interrupt -} sr_simple_timer_t; - -#define sr_simple_timer ((sr_simple_timer_t *) _SR_ADDR(SR_SIMTIMER)) - -/////////////////////////////////////////////////// -// UART, Slave 10 - -#define UART_BASE 0xE000 - -typedef struct { - // All elements are 8 bits except for clkdiv (16), but we use uint32 to make - // the hardware for decoding easier - volatile uint32_t clkdiv; // Set to 50e6 divided by baud rate (no x16 factor) - volatile uint32_t txlevel; // Number of spaces in the FIFO for writes - volatile uint32_t rxlevel; // Number of available elements in the FIFO for reads - volatile uint32_t txchar; // Write characters to be sent here - volatile uint32_t rxchar; // Read received characters here -} uart_regs_t; - -#define uart_regs ((uart_regs_t *) UART_BASE) - -/////////////////////////////////////////////////// -// ATR Controller, Slave 11 - -#define ATR_BASE 0xE400 - -typedef struct { - volatile uint32_t v[16]; -} atr_regs_t; - -#define ATR_IDLE 0x0 // indicies into v -#define ATR_TX 0x1 -#define ATR_RX 0x2 -#define ATR_FULL 0x3 - -#define atr_regs ((atr_regs_t *) ATR_BASE) - -/////////////////////////////////////////////////// -// SD Card SPI interface, Slave 13 -// All regs are 8 bits wide, but are accessed as if they are 32 bits - -#define SDSPI_BASE 0xEC00 - -typedef struct { - volatile uint32_t status; // Write a 1 or 0 for controlling CS - volatile uint32_t clkdiv; - volatile uint32_t send_dat; - volatile uint32_t receive_dat; -} sdspi_regs_t; - -#define sdspi_regs ((sdspi_regs_t *) SDSPI_BASE) - -/////////////////////////////////////////////////// -// External RAM interface, Slave 14 -// Pages are 1K. Page is 10 bits, set by a control register -// output_regs->ram_page - -#define EXTRAM_BASE 0xF000 -#define extram ((volatile uint32_t *) EXTRAM_BASE) - - -/////////////////////////////////////////////////// - -#endif - diff --git a/firmware/microblaze/lib/net/.gitignore b/firmware/microblaze/lib/net/.gitignore new file mode 100644 index 000000000..282522db0 --- /dev/null +++ b/firmware/microblaze/lib/net/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/firmware/microblaze/lib/net/eth_mac_addr.h b/firmware/microblaze/lib/net/eth_mac_addr.h new file mode 100644 index 000000000..b44fb68f7 --- /dev/null +++ b/firmware/microblaze/lib/net/eth_mac_addr.h @@ -0,0 +1,29 @@ +/* + * Copyright 2009 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifndef INCLUDED_ETH_MAC_ADDR_H +#define INCLUDED_ETH_MAC_ADDR_H + +#include + +// Ethernet MAC address + +typedef struct { + uint8_t addr[6]; +} eth_mac_addr_t; + +#endif /* INCLUDED_ETH_MAC_ADDR_H */ diff --git a/firmware/microblaze/lib/net/padded_eth_hdr.h b/firmware/microblaze/lib/net/padded_eth_hdr.h new file mode 100644 index 000000000..df816734f --- /dev/null +++ b/firmware/microblaze/lib/net/padded_eth_hdr.h @@ -0,0 +1,37 @@ +/* -*- c++ -*- */ +/* + * Copyright 2009,2010 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef INCLUDED_PADDED_ETH_HDR_H +#define INCLUDED_PADDED_ETH_HDR_H + +#include +#include + +/*! + * \brief Standard 14-byte ethernet header plus two leading bytes of padding. + * + * This is what a buffer contains in line 1 when using the "slow mode" + */ +typedef struct { + uint16_t pad; + eth_mac_addr_t dst; + eth_mac_addr_t src; + uint16_t ethertype; +} _AL4 padded_eth_hdr_t; + + +#endif /* INCLUDED_PADDED_ETH_HDR_H */ diff --git a/firmware/microblaze/lib/net/socket_address.h b/firmware/microblaze/lib/net/socket_address.h new file mode 100644 index 000000000..336f30a0c --- /dev/null +++ b/firmware/microblaze/lib/net/socket_address.h @@ -0,0 +1,41 @@ +/* -*- c -*- */ +/* + * Copyright 2010 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef INCLUDED_SOCKET_ADDRESS_H +#define INCLUDED_SOCKET_ADDRESS_H + +#include + +// port and address are in network byte order + +typedef struct socket_address { + unsigned short port; + struct ip_addr addr; +} socket_address_t; + +static inline struct socket_address +make_socket_address(struct ip_addr addr, int port) +{ + struct socket_address r; + r.port = port; + r.addr = addr; + return r; +} + + + +#endif /* INCLUDED_SOCKET_ADDRESS_H */ diff --git a/firmware/microblaze/lib/nonstdio.c b/firmware/microblaze/lib/nonstdio.c index 1c991afee..4b5fa4123 100644 --- a/firmware/microblaze/lib/nonstdio.c +++ b/firmware/microblaze/lib/nonstdio.c @@ -78,3 +78,46 @@ puthex32_nl(unsigned long x) puthex32(x); newline(); } +/* +void reverse(char s[]) +{ + int c, i, j; + + for (i = 0, j = strlen(s)-1; i= 0) ? value : 0-value; +} + +//we'll keep the puthex functions above because they're way more lightweight. but sometimes you just want to print in decimal, you know? +char *itoa(signed long value, char *result, int base) +{ + // check that the base if valid + if (base < 2 || base > 16) { *result = 0; return result; } + + char* out = result; + signed long quotient = value; + + do { + *out = hex[ abs(quotient % base) ]; + ++out; + quotient /= base; + } while ( quotient ); + + // Only apply negative sign for base 10 + if ( value < 0 && base == 10) *out++ = '-'; + + *out = 0; + reverse( result ); + + return result; + +} +*/ + + diff --git a/firmware/microblaze/lib/nonstdio.h b/firmware/microblaze/lib/nonstdio.h index 3fd9e39bb..62ebfa46d 100644 --- a/firmware/microblaze/lib/nonstdio.h +++ b/firmware/microblaze/lib/nonstdio.h @@ -1,4 +1,6 @@ -/* -*- c -*- */ +// +// Copyright 2010 Ettus Research LLC +// /* * Copyright 2007 Free Software Foundation, Inc. * @@ -20,7 +22,7 @@ #define INCLUDED_NONSTDIO_H #include -#include +#include #include void putstr(const char *s); // cf puts, no added newline @@ -37,10 +39,10 @@ void puthex32_nl(unsigned long x); void newline(); // putchar('\n') void print_mac_addr(const unsigned char addr[6]); -void print_fxpt_freq(u2_fxpt_freq_t v); -void print_fxpt_gain(u2_fxpt_gain_t v); void print_uint64(uint64_t v); void print_buffer(uint32_t *buf, size_t n); +//char *itoa(signed long value, char *result, int base); +//void reverse(char s[]); #endif /* INCLUDED_NONSTDIO_H */ diff --git a/firmware/microblaze/lib/pic.c b/firmware/microblaze/lib/pic.c index 4575bd775..e89d2b755 100644 --- a/firmware/microblaze/lib/pic.c +++ b/firmware/microblaze/lib/pic.c @@ -44,7 +44,7 @@ pic_init(void) // uP is level triggered pic_regs->mask = ~0; // mask all interrupts - pic_regs->edge_enable = PIC_ONETIME_INT | PIC_PHY_INT; + pic_regs->edge_enable = PIC_ONETIME_INT; pic_regs->polarity = ~0 & ~PIC_PHY_INT; // rising edge pic_regs->pending = ~0; // clear all pending ints } diff --git a/firmware/microblaze/lib/sd.c b/firmware/microblaze/lib/sd.c deleted file mode 100644 index d000b28ae..000000000 --- a/firmware/microblaze/lib/sd.c +++ /dev/null @@ -1,197 +0,0 @@ -/* -*- c -*- */ -/* - * Copyright 2008 Ettus Research LLC - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "sd.h" -#include "memory_map.h" -#include "stdint.h" -#include "stdio.h" - -static inline void -sd_packarg(unsigned char *argument,unsigned int value) -{ - argument[3] = (unsigned char)(value >> 24); - argument[2] = (unsigned char)(value >> 16); - argument[1] = (unsigned char)(value >> 8); - argument[0] = (unsigned char)(value); -} - -int -sd_init(void) -{ - unsigned char response[5]; - unsigned char argument[4]; - int i,j; - - for(i=0;i<4;i++) - argument[i] = 0; - - // Set clock to less than 400 kHz to start out - sdspi_regs->clkdiv = 128; - - // Delay at least 74 cycles - sd_assert_cs(); - for(i = 0; i < 100; i++) - sd_send_byte(SD_IDLE); - sd_deassert_cs(); - - // Initialization Sequence -- CMD0 CMD55 ACMD41 CMD58 - // Put card in idle state - if(sd_send_command(SD_CMD0,SD_CMD0_R,response,argument)==0) - return 0; // Something went wrong in command - - j = 0; - do { - j++; - if(sd_send_command(SD_CMD55,SD_CMD55_R,response,argument)==1) - sd_send_command(SD_ACMD41,SD_ACMD41_R,response,argument); - else - j = SD_IDLE_WAIT_MAX; - } - while(((response[0] & SD_MSK_IDLE) == SD_MSK_IDLE) && (j < SD_IDLE_WAIT_MAX)); - - if(j>= SD_IDLE_WAIT_MAX) // IDLE timeout exceeded, card asleep - return 0; - - // CMD58 reads the SD card capabilities - if(sd_send_command(SD_CMD58,SD_CMD58_R,response,argument)==0) - return 0; // CMD58 FAIL - - if((response[2] & SD_MSK_OCR_33) != SD_MSK_OCR_33) - return 0; // Card doesn't do 3.3V - - //printf("OCR = %x %x %x %x\n",response[0],response[1],response[2],response[3]); - - // Set blocklen here - sd_packarg(argument,SD_BLOCKLEN); - if(sd_send_command(SD_CMD16,SD_CMD16_R,response,argument)==0) - return 0; // Set Blocklen failed - - // Reset back to high speed - sdspi_regs->clkdiv = 4; - //puts("finished init\n"); - return 1; -} - -int sd_send_command(unsigned char cmd,unsigned char response_type, - unsigned char *response,unsigned char *argument) -{ - int i; - char response_length; - unsigned char tmp; - - sd_assert_cs(); - sd_send_byte((cmd & 0x3F) | 0x40); - for(i=3;i>=0;i--) - sd_send_byte(argument[i]); - sd_send_byte(SD_CRC); // Always the same - - response_length = 0; - switch(response_type) - { - case SD_R1: - case SD_R1B: - response_length = 1; - break; - case SD_R2: - response_length = 2; - break; - case SD_R3: - response_length = 5; - break; - default: - break; - } - - // Wait for a response, which will have a 0 start bit - i = 0; - do - { - tmp = sd_rcv_byte(); - i++; - } - while(((tmp & 0x80) != 0) && i < SD_CMD_TIMEOUT); - - if(i>= SD_CMD_TIMEOUT) - { - sd_deassert_cs(); - //puts("cmd send timeout\n"); - return 0; - } - - for(i=response_length-1; i>=0; i--) - { - response[i] = tmp; - tmp = sd_rcv_byte(); - } - i = 0; - if(response_type == SD_R1B) - { - do - { - i++; - tmp = sd_rcv_byte(); - } - while(tmp != SD_IDLE); - sd_send_byte(SD_IDLE); - } - - //puts("send cmd success\n"); - sd_deassert_cs(); - return 1; -} - -int -sd_read_block (unsigned int blockaddr, unsigned char *buf) -{ - unsigned char response[5]; - unsigned char argument[4]; - unsigned int i = 0; - unsigned char tmp; - - blockaddr <<= SD_BLOCKLEN_NBITS; - sd_packarg(argument,blockaddr); - if(sd_send_command(SD_CMD17,SD_CMD17_R,response,argument)==0) - return 0; //Failed READ; - if(response[0] != 0) - return 0; //Misaligned READ - - sd_assert_cs(); - i = 0; - do - { - tmp = sd_rcv_byte(); - i++; - } - while((tmp == 0xFF) && (i < SD_RD_TIMEOUT)); - if((i>= SD_RD_TIMEOUT) ||((tmp & SD_MSK_TOK_DATAERROR) == 0)) - { - sd_send_byte(SD_IDLE); // Send a dummy before quitting - return 0; // Data ERROR - } - for(i=0;i. - */ - -#ifndef INCLUDED_SD_H -#define INCLUDED_SD_H - -#include "memory_map.h" - -#define SD_READY 1 -#define SD_IDLE_WAIT_MAX 100 -#define SD_CMD_TIMEOUT 100 -#define SD_RD_TIMEOUT 1000 - -#define SD_CMD0 0 -#define SD_CMD1 1 -#define SD_CMD9 9 -#define SD_CMD10 10 -#define SD_CMD12 12 -#define SD_CMD13 13 -#define SD_CMD16 16 -#define SD_CMD17 17 -#define SD_CMD18 18 -#define SD_CMD24 24 -#define SD_CMD25 25 -#define SD_CMD27 27 -#define SD_CMD28 28 -#define SD_CMD29 29 -#define SD_CMD30 30 -#define SD_CMD32 32 -#define SD_CMD33 33 -#define SD_CMD38 38 -#define SD_CMD55 55 -#define SD_CMD58 58 -#define SD_CMD59 59 -#define SD_ACMD41 41 -#define SD_IDLE 0xFF -#define SD_CRC 0x95 - -#define SD_R1 1 -#define SD_R1B 2 -#define SD_R2 3 -#define SD_R3 4 - -#define SD_CMD0_R SD_R1 -#define SD_CMD16_R SD_R1 -#define SD_CMD17_R SD_R1 -#define SD_CMD55_R SD_R1 -#define SD_ACMD41_R SD_R1 -#define SD_CMD58_R SD_R3 - -#define SD_BLOCKLEN 512 -#define SD_BLOCKLEN_NBITS 9 - -#define SD_MSK_IDLE 0x01 -#define SD_MSK_OCR_33 0xC0 -#define SD_MSK_TOK_DATAERROR 0xE0 - - -int sd_init(void); - -static inline void -sd_assert_cs(void) -{ - // Wait for idle before doing anything - while(sdspi_regs->status != SD_READY) - ; - sdspi_regs->status = 1; -} - -static inline void -sd_deassert_cs(void) -{ - // Wait for idle before doing anything - while(sdspi_regs->status != SD_READY) - ; - sdspi_regs->status = 0; -} - -static inline char -sd_rcv_byte(void) -{ - // Wait for idle before doing anything - while(sdspi_regs->status != SD_READY) - ; - sdspi_regs->send_dat = SD_IDLE; - while(sdspi_regs->status != SD_READY) - ; - return sdspi_regs-> receive_dat; -} - -static inline void -sd_send_byte(char dat) -{ - // Wait for idle before doing anything - while(sdspi_regs->status != SD_READY) - ; // Wait for status = 1 (ready) - sdspi_regs->send_dat = dat; -} - - -int sd_send_command(unsigned char cmd,unsigned char response_type, - unsigned char *response,unsigned char *argument); - -int sd_read_block (unsigned int blockaddr, unsigned char *buf); -int sd_write_block(unsigned int blockaddr, const unsigned char *buf); - -#endif /* INCLUDED_SD_H */ diff --git a/firmware/microblaze/lib/spi.c b/firmware/microblaze/lib/spi.c index 937397df6..bef808e57 100644 --- a/firmware/microblaze/lib/spi.c +++ b/firmware/microblaze/lib/spi.c @@ -43,7 +43,7 @@ spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags spi_wait(); // Tell it which SPI slave device to access - spi_regs->ss = slave & 0xff; + spi_regs->ss = slave & 0xffff; // Data we will send spi_regs->txrx0 = data; diff --git a/firmware/microblaze/lib/spi.h b/firmware/microblaze/lib/spi.h index f5b69b270..01e4d26fd 100644 --- a/firmware/microblaze/lib/spi.h +++ b/firmware/microblaze/lib/spi.h @@ -48,5 +48,23 @@ void spi_wait(void); uint32_t spi_transact(bool readback, int slave, uint32_t data, int length, uint32_t flags); +// ---------------------------------------------------------------- +// Routines that manipulate the FLASH SPI BUS +// ---------------------------------------------------------------- + +/*! + * \brief One time call to initialize SPI + */ +void spif_init(void); + +/*! + * \brief Wait for last SPI transaction to complete. + * Unless you need to know it completed, it's not necessary to call this. + */ +void spif_wait(void); + +uint32_t +spif_transact(bool readback_, int slave, uint32_t data, int length, uint32_t flags); + #endif /* INCLUDED_SPI_H */ diff --git a/firmware/microblaze/lib/u2_init.c b/firmware/microblaze/lib/u2_init.c index 6809101c0..75bc40859 100644 --- a/firmware/microblaze/lib/u2_init.c +++ b/firmware/microblaze/lib/u2_init.c @@ -25,9 +25,8 @@ #include "i2c.h" #include "mdelay.h" #include "clocks.h" -#include "usrp2_i2c_addr.h" - -//#include "nonstdio.h" +#include "usrp2/fw_common.h" +#include "nonstdio.h" unsigned char u2_hw_rev_major; unsigned char u2_hw_rev_minor; @@ -35,8 +34,8 @@ unsigned char u2_hw_rev_minor; static inline void get_hw_rev(void) { - bool ok = eeprom_read(I2C_ADDR_MBOARD, MBOARD_REV_LSB, &u2_hw_rev_minor, 1); - ok &= eeprom_read(I2C_ADDR_MBOARD, MBOARD_REV_MSB, &u2_hw_rev_major, 1); + bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_REV_LSB, &u2_hw_rev_minor, 1); + ok &= eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_REV_MSB, &u2_hw_rev_major, 1); } /* @@ -68,7 +67,7 @@ u2_init(void) mdelay(100); hal_set_leds(0x1f, 0x1f); mdelay(100); - hal_set_leds(0x1, 0x1f); // Leave the first one on + hal_set_leds(LED_D, 0x1f); // Leave one on #if 0 // test register readback diff --git a/firmware/microblaze/usrp2/.gitignore b/firmware/microblaze/usrp2/.gitignore new file mode 100644 index 000000000..18f715618 --- /dev/null +++ b/firmware/microblaze/usrp2/.gitignore @@ -0,0 +1,9 @@ +/Makefile +/Makefile.in +/*.a +/*.bin +/*.dump +/*.ihx +/*.elf +/*.rom +/*.map diff --git a/firmware/microblaze/usrp2/Makefile.am b/firmware/microblaze/usrp2/Makefile.am new file mode 100644 index 000000000..8da013980 --- /dev/null +++ b/firmware/microblaze/usrp2/Makefile.am @@ -0,0 +1,43 @@ +# +# Copyright 2010 Ettus Research LLC +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . +# + +include $(top_srcdir)/Makefile.common + +AM_CFLAGS = \ + $(COMMON_CFLAGS) + +AM_LDFLAGS = \ + $(COMMON_LFLAGS) \ + libusrp2.a \ + -Wl,-defsym -Wl,_TEXT_START_ADDR=0x0050 \ + -Wl,-defsym -Wl,_STACK_SIZE=3072 + +######################################################################## +# USRP2 specific library and programs +######################################################################## +noinst_LIBRARIES = libusrp2.a + +libusrp2_a_SOURCES = \ + $(COMMON_SRCS) \ + sd.c \ + ethernet.c + +noinst_PROGRAMS = \ + usrp2_txrx_uhd.elf + +usrp2_txrx_uhd_elf_SOURCES = \ + $(top_srcdir)/apps/txrx_uhd.c diff --git a/firmware/microblaze/usrp2/eth_phy.h b/firmware/microblaze/usrp2/eth_phy.h new file mode 100644 index 000000000..6c16f97b7 --- /dev/null +++ b/firmware/microblaze/usrp2/eth_phy.h @@ -0,0 +1,219 @@ +/* -*- c -*- */ +/* + * Copyright 2007 Free Software Foundation, Inc. + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Much of this was extracted from the Linux e1000_hw.h file */ + +#ifndef INCLUDED_ETH_PHY_H +#define INCLUDED_ETH_PHY_H + +/* PHY 1000 MII Register/Bit Definitions */ +/* PHY Registers defined by IEEE */ + +#define PHY_CTRL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Regiser */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page TX */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +/* PHY 1000 MII Register additions in DP83856 */ +/* The part implements 0x00 thru 0x1f; we use these. */ + +#define PHY_LINK_AN 0x11 /* Link and Auto Negotiation Status Reg */ +#define PHY_INT_STATUS 0x14 /* Interupt Status Reg (RO) */ +#define PHY_INT_MASK 0x15 /* Interrupt Mask Reg (RW) */ +#define PHY_INT_CLEAR 0x17 /* Interrupt Clear Reg (RW) */ + + +/* Bit definitions for some of the registers above */ + +/* PHY Control Register (PHY_CTRL) */ +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ + +/* PHY Status Register (PHY_STATUS) */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ + +/* Autoneg Advertisement Register (PHY_AUTONEG_ADV) */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Link Partner Ability Register (Base Page) (PHY_LP_ABILITY) */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP is 10T Half Duplex Capable */ +#define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP is 10T Full Duplex Capable */ +#define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP is 100TX Half Duplex Capable */ +#define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP is 100TX Full Duplex Capable */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asymmetric Pause Direction bit */ +#define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP has detected Remote Fault */ +#define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP has rx'd link code word */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ + +/* Autoneg Expansion Register (PHY_AUTONEG_EXP) */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_PAGE_RXD 0x0002 /* LP is 10T Half Duplex Capable */ +#define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP is 10T Full Duplex Capable */ +#define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP is 100TX Half Duplex Capable */ +#define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP is 100TX Full Duplex Capable */ + +/* Next Page TX Register (PHY_NEXT_PAGE_TX) */ +#define NPTX_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define NPTX_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define NPTX_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define NPTX_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define NPTX_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ + +/* Link Partner Next Page Register (PHY_LP_NEXT_PAGE) */ +#define LP_RNPR_MSG_CODE_FIELD 0x0001 /* NP msg code or unformatted data */ +#define LP_RNPR_TOGGLE 0x0800 /* Toggles between exchanges + * of different NP + */ +#define LP_RNPR_ACKNOWLDGE2 0x1000 /* 1 = will comply with msg + * 0 = cannot comply with msg + */ +#define LP_RNPR_MSG_PAGE 0x2000 /* formatted(1)/unformatted(0) pg */ +#define LP_RNPR_ACKNOWLDGE 0x4000 /* 1 = ACK / 0 = NO ACK */ +#define LP_RNPR_NEXT_PAGE 0x8000 /* 1 = addition NP will follow + * 0 = sending last NP + */ + +/* 1000BASE-T Control Register (PHY_1000T_CTRL) */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port */ + /* 0=DTE device */ +#define CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master */ + /* 0=Configure PHY as Slave */ +#define CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value */ + /* 0=Automatic Master/Slave config */ +#define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ + +/* 1000BASE-T Status Register (PHY_1000T_STATUS) */ +#define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle errors since last read */ +#define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asymmetric pause direction bit */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local TX is Master, 0=Slave */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define SR_1000T_REMOTE_RX_STATUS_SHIFT 12 +#define SR_1000T_LOCAL_RX_STATUS_SHIFT 13 +#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 +#define FFE_IDLE_ERR_COUNT_TIMEOUT_20 20 +#define FFE_IDLE_ERR_COUNT_TIMEOUT_100 100 + +/* Extended Status Register (PHY_EXT_STATUS) */ +#define IEEE_ESR_1000T_HD_CAPS 0x1000 /* 1000T HD capable */ +#define IEEE_ESR_1000T_FD_CAPS 0x2000 /* 1000T FD capable */ +#define IEEE_ESR_1000X_HD_CAPS 0x4000 /* 1000X HD capable */ +#define IEEE_ESR_1000X_FD_CAPS 0x8000 /* 1000X FD capable */ + +#define PHY_TX_POLARITY_MASK 0x0100 /* register 10h bit 8 (polarity bit) */ +#define PHY_TX_NORMAL_POLARITY 0 /* register 10h bit 8 (normal polarity) */ + +#define AUTO_POLARITY_DISABLE 0x0010 /* register 11h bit 4 */ + /* (0=enable, 1=disable) */ + +/* Link and Auto Negotiation Status Reg (PHY_LINK_AN) [READ-ONLY] */ +#define LANSR_MASTER 0x0001 /* 1=PHY is currently in master mode */ +#define LANSR_FULL_DUPLEX 0x0002 /* 1=PHY is currently full duplex */ +#define LANSR_LINK_GOOD 0x0004 /* 1=a good link is established */ +#define LANSR_SPEED_MASK 0x0018 +#define LANSR_SPEED_10 0x0000 /* 10Mb/s */ +#define LANSR_SPEED_100 0x0008 /* 100Mb/s */ +#define LANSR_SPEED_1000 0x0010 /* 1000Mb/s */ +#define LANSR_SPEED_RSRVD 0x0018 /* reserved */ +#define LANSR_NON_COMP_MODE 0x0020 /* 1=detects only in non-compliant mode */ +#define LANSR_DEEP_LOOPBACK 0x0040 /* 1=the PHY operates in deep loopback mode */ +#define LANSR_SHALLOW_LOOPBACK 0x0080 /* 1=the PHY operates in shallow loopback mode */ +#define LANSR_RSRVD_8 0x0100 /* reserved */ +#define LANSR_FIFO_ERR 0x0200 /* 1=FIFO error occurred */ +#define LANSR_MDIX_XOVER 0x0400 /* 1=PHY's MDI is in cross-over mode */ +#define LANSR_RSRVD_11 0x0800 /* resevered */ +#define LANSR_TP_POLARITY_REV 0xf000 /* Twisted pair polarity status A:D([15:12]) 1=reversed */ + +/* Interrupt status, mask and clear regs (PHY_INT_{STATUS,MASK,CLEAR}) */ +#define PHY_INT_RSRVD_0 0x0001 /* reserved */ +#define PHY_INT_RSRVD_1 0x0002 /* reserved */ +#define PHY_INT_RSRVD_2 0x0004 /* reserved */ +#define PHY_INT_REM_FLT_CNG 0x0008 /* Remote Fault Changed */ +#define PHY_INT_AN_CMPL 0x0010 /* Auto-negotiation completion */ +#define PHY_INT_NXT_PG_RCVD 0x0020 /* Next Page Received */ +#define PHY_INT_JABBER_CNG 0x0040 /* Jabber Changed */ +#define PHY_INT_NO_LINK 0x0080 /* No link after auto-negotiation */ +#define PHY_INT_NO_HCD 0x0100 /* AN couldn't determine highest common denominator */ +#define PHY_INT_MAS_SLA_ERR 0x0200 /* Master / Slave Error: couldn't resolve */ +#define PHY_INT_PRL_DET_FLT 0x0400 /* Parallel detection fault */ +#define PHY_INT_POL_CNG 0x0800 /* Polarity of any channel changed */ +#define PHY_INT_MDIX_CNG 0x1000 /* MDIX changed. A pair swap occurred. */ +#define PHY_INT_DPLX_CNG 0x2000 /* Duplex changed */ +#define PHY_INT_LNK_CNG 0x4000 /* Link changed (asserted when a link is established or broken) */ +#define PHY_INT_SPD_CNG 0x8000 /* Speed changed */ + +#endif /* INCLUDED_ETH_PHY_H */ diff --git a/firmware/microblaze/usrp2/ethernet.c b/firmware/microblaze/usrp2/ethernet.c new file mode 100644 index 000000000..d60d7dc4c --- /dev/null +++ b/firmware/microblaze/usrp2/ethernet.c @@ -0,0 +1,389 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "ethernet.h" +#include "memory_map.h" +#include "eth_phy.h" +#include "eth_mac.h" +#include "eth_mac_regs.h" +#include "pic.h" +#include "hal_io.h" +#include "nonstdio.h" +#include +#include "i2c.h" +#include "usrp2/fw_common.h" + +#define VERBOSE 1 + +static ethernet_t ed_state; +static ethernet_link_changed_callback_t ed_callback = 0; + +void +ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback) +{ + ed_callback = new_callback; +} + + +static void +ed_set_mac_speed(int speed) +{ + printf("Speed set to %d\n",speed); + /* + switch(speed){ + case 10: + eth_mac->speed = 1; + break; + case 100: + eth_mac->speed = 2; + break; + case 1000: + eth_mac->speed = 4; + break; + default: + break; + } + */ +} + +static void +ed_link_up(int speed) +{ + // putstr("ed_link_up: "); puthex16_nl(speed); + + ed_set_mac_speed(speed); + + if (ed_callback) // fire link changed callback + (*ed_callback)(speed); +} + +static void +ed_link_down(void) +{ + // putstr("ed_link_down\n"); + + if (ed_callback) // fire link changed callback + (*ed_callback)(0); +} + + +static void +ed_link_speed_change(int speed) +{ + ed_link_down(); + ed_link_up(speed); +} + +static void +print_flow_control(int flow_control) +{ + static const char *flow_control_msg[4] = { + "NONE", "WE_TX", "WE_RX", "SYMMETRIC" + }; + putstr("ethernet flow control: "); + puts(flow_control_msg[flow_control & 0x3]); +} + +static void +check_flow_control_resolution(void) +{ + static const unsigned char table[16] = { + // index = {local_asm, local_pause, partner_asm, partner_pause} + FC_NONE, FC_NONE, FC_NONE, FC_NONE, + FC_NONE, FC_SYMM, FC_NONE, FC_SYMM, + FC_NONE, FC_NONE, FC_NONE, FC_WE_TX, + FC_NONE, FC_SYMM, FC_WE_RX, FC_SYMM + }; + + int us = eth_mac_miim_read(PHY_AUTONEG_ADV); + int lp = eth_mac_miim_read(PHY_LP_ABILITY); + int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3); + ed_state.flow_control = table[index]; + + if (1) + print_flow_control(ed_state.flow_control); +} + +/* + * Read the PHY state register to determine link state and speed + */ +static void +ed_check_phy_state(void) +{ + int lansr = eth_mac_miim_read(PHY_LINK_AN); + eth_link_state_t new_state = LS_UNKNOWN; + int new_speed = S_UNKNOWN; + + if (VERBOSE){ + putstr("LANSR: "); + puthex16_nl(lansr); + } + + if (lansr & LANSR_LINK_GOOD){ // link's up + if (VERBOSE) + puts(" LINK_GOOD"); + + new_state = LS_UP; + switch (lansr & LANSR_SPEED_MASK){ + case LANSR_SPEED_10: + new_speed = 10; + break; + + case LANSR_SPEED_100: + new_speed = 100; + break; + + case LANSR_SPEED_1000: + new_speed = 1000; + break; + + default: + new_speed = S_UNKNOWN; + break; + } + + check_flow_control_resolution(); + } + else { // link's down + if (VERBOSE) + puts(" NOT LINK_GOOD"); + + new_state = LS_DOWN; + new_speed = S_UNKNOWN; + } + + if (new_state != ed_state.link_state){ + ed_state.link_state = new_state; // remember new state + if (new_state == LS_UP) + ed_link_up(new_speed); + else if (new_state == LS_DOWN) + ed_link_down(); + } + else if (new_state == LS_UP && new_speed != ed_state.link_speed){ + ed_state.link_speed = new_speed; // remember new speed + ed_link_speed_change(new_speed); + } +} + +/* + * This is fired when the ethernet PHY state changes + */ +static void +eth_phy_irq_handler(unsigned irq) +{ + ed_check_phy_state(); + eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all ints +} + +void +ethernet_init(void) +{ + eth_mac_init(ethernet_mac_addr()); + + ed_state.link_state = LS_UNKNOWN; + ed_state.link_speed = S_UNKNOWN; + + // initialize MAC registers + // eth_mac->tx_hwmark = 0x1e; + //eth_mac->tx_lwmark = 0x19; + + //eth_mac->crc_chk_en = 1; + //eth_mac->rx_max_length = 2048; + + // configure PAUSE frame stuff + //eth_mac->tx_pause_en = 1; // pay attn to pause frames sent to us + + //eth_mac->pause_quanta_set = 38; // a bit more than 1 max frame 16kb/512 + fudge + //eth_mac->pause_frame_send_en = 1; // enable sending pause frames + + + // setup PHY to interrupt on changes + + unsigned mask = + (PHY_INT_AN_CMPL // auto-neg completed + | PHY_INT_NO_LINK // no link after auto-neg + | PHY_INT_NO_HCD // no highest common denominator + | PHY_INT_MAS_SLA_ERR // couldn't resolve master/slave + | PHY_INT_PRL_DET_FLT // parallel detection fault + | PHY_INT_LNK_CNG // link established or broken + | PHY_INT_SPD_CNG // speed changed + ); + + eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all pending interrupts + eth_mac_miim_write(PHY_INT_MASK, mask); // enable the ones we want + + pic_register_handler(IRQ_PHY, eth_phy_irq_handler); + + // Advertise our flow control configuation. + // + // We and the link partner each specify two bits in the base page + // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR. + // The bits say what a device is "willing" to do, not what may actually + // happen as a result of the negotiation. There are 4 cases: + // + // PAUSE ASM_DIR + // + // 0 0 I have no flow control capability. + // + // 1 0 I both assert and respond to flow control. + // + // 0 1 I assert flow control, but cannot respond. That is, + // I want to be able to send PAUSE frames, but will ignore any + // you send to me. (This is our configuration.) + // + // 1 1 I can both assert and respond to flow control AND I am willing + // to operate symmetrically OR asymmetrically in EITHER direction. + // (We hope the link partner advertises this, otherwise we don't + // get what we want.) + + int t = eth_mac_miim_read(PHY_AUTONEG_ADV); + t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR); + t |= NWAY_AR_ASM_DIR; + + // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex + t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS); + + eth_mac_miim_write(PHY_AUTONEG_ADV, t); + int r = eth_mac_miim_read(PHY_AUTONEG_ADV); // DEBUG, read back + if (t != r){ + printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r); + } + + // Restart autonegotation. + // We want to ensure that we're advertising our PAUSE capabilities. + t = eth_mac_miim_read(PHY_CTRL); + eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG); +} + +static bool +unprogrammed(const void *t, size_t len) +{ + int i; + uint8_t *p = (uint8_t *)t; + bool all_zeros = true; + bool all_ones = true; + for (i = 0; i < len; i++){ + all_zeros &= p[i] == 0x00; + all_ones &= p[i] == 0xff; + } + return all_ones | all_zeros; +} + +//////////////////// MAC Addr Stuff /////////////////////// + +static int8_t src_mac_addr_initialized = false; +static eth_mac_addr_t src_mac_addr = {{ + 0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff + }}; + +const eth_mac_addr_t * +ethernet_mac_addr(void) +{ + if (!src_mac_addr_initialized){ // fetch from eeprom + src_mac_addr_initialized = true; + + // if we're simulating, don't read the EEPROM model, it's REALLY slow + if (hwconfig_simulation_p()) + return &src_mac_addr; + + eth_mac_addr_t tmp; + bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, &tmp, sizeof(tmp)); + if (!ok || unprogrammed(&tmp, sizeof(tmp))){ + // use the default + } + else + src_mac_addr = tmp; + } + + return &src_mac_addr; +} + +bool +ethernet_set_mac_addr(const eth_mac_addr_t *t) +{ + bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, t, sizeof(eth_mac_addr_t)); + if (ok){ + src_mac_addr = *t; + src_mac_addr_initialized = true; + //eth_mac_set_addr(t); //this breaks the link + } + + return ok; +} + +//////////////////// IP Addr Stuff /////////////////////// + +static int8_t src_ip_addr_initialized = false; +static struct ip_addr src_ip_addr = { + (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0) +}; + + +const struct ip_addr *get_ip_addr(void) +{ + if (!src_ip_addr_initialized){ // fetch from eeprom + src_ip_addr_initialized = true; + + // if we're simulating, don't read the EEPROM model, it's REALLY slow + if (hwconfig_simulation_p()) + return &src_ip_addr; + + struct ip_addr tmp; + bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, &tmp, sizeof(tmp)); + if (!ok || unprogrammed(&tmp, sizeof(tmp))){ + // use the default + } + else + src_ip_addr = tmp; + } + + return &src_ip_addr; +} + +bool set_ip_addr(const struct ip_addr *t){ + bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, t, sizeof(struct ip_addr)); + if (ok){ + src_ip_addr = *t; + src_ip_addr_initialized = true; + } + + return ok; +} + +int +ethernet_check_errors(void) +{ + // these registers are reset when read + + int r = 0; + /* + if (eth_mac_read_rmon(0x05) != 0) + r |= RME_RX_CRC; + if (eth_mac_read_rmon(0x06) != 0) + r |= RME_RX_FIFO_FULL; + if (eth_mac_read_rmon(0x07) != 0) + r |= RME_RX_2SHORT_2LONG; + + if (eth_mac_read_rmon(0x25) != 0) + r |= RME_TX_JAM_DROP; + if (eth_mac_read_rmon(0x26) != 0) + r |= RME_TX_FIFO_UNDER; + if (eth_mac_read_rmon(0x27) != 0) + r |= RME_TX_FIFO_OVER; + */ + return r; +} diff --git a/firmware/microblaze/usrp2/memory_map.h b/firmware/microblaze/usrp2/memory_map.h new file mode 100644 index 000000000..41a2820bc --- /dev/null +++ b/firmware/microblaze/usrp2/memory_map.h @@ -0,0 +1,797 @@ +/* -*- c -*- */ +/* + * Copyright 2007,2008,2009 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Overall Memory Map + * 0000-7FFF 32K RAM space (16K on 1500, 24K on 2000, 32K on DSP) + * 8000-BFFF 16K Buffer Pool + * C000-FFFF 16K Peripherals + */ + + +#ifndef INCLUDED_MEMORY_MAP_H +#define INCLUDED_MEMORY_MAP_H + +#include + + +#define MASTER_CLK_RATE 100000000 // 100 MHz + + +//////////////////////////////////////////////////////////////// +// +// Memory map for embedded wishbone bus +// +//////////////////////////////////////////////////////////////// + + +//////////////////////////////////////////////////////////////// +// Main RAM, Slave 0 + +#define RAM_BASE 0x0000 + +//////////////////////////////////////////////////////////////// +// Buffer Pool RAM, Slave 1 +// +// The buffers themselves are located in Slave 1, Buffer Pool RAM. +// The status registers are in Slave 5, Buffer Pool Status. +// The control register is in Slave 7, Settings Bus. + +#define BUFFER_POOL_RAM_BASE 0x8000 + +#define NBUFFERS 8 +#define BP_NLINES 0x0200 // number of 32-bit lines in a buffer +#define BP_LAST_LINE (BP_NLINES - 1) // last line in a buffer + +#define buffer_pool_ram \ + ((uint32_t *) BUFFER_POOL_RAM_BASE) + +#define buffer_ram(n) (&buffer_pool_ram[(n) * BP_NLINES]) + + +///////////////////////////////////////////////////// +// SPI Core, Slave 2. See core docs for more info +#define SPI_BASE 0xC000 // Base address (16-bit) + +typedef struct { + volatile uint32_t txrx0; + volatile uint32_t txrx1; + volatile uint32_t txrx2; + volatile uint32_t txrx3; + volatile uint32_t ctrl; + volatile uint32_t div; + volatile uint32_t ss; +} spi_regs_t; + +#define spi_regs ((spi_regs_t *) SPI_BASE) + + +// Masks for controlling different peripherals +#define SPI_SS_AD9510 1 +#define SPI_SS_AD9777 2 +#define SPI_SS_RX_DAC 4 +#define SPI_SS_RX_ADC 8 +#define SPI_SS_RX_DB 16 +#define SPI_SS_TX_DAC 32 +#define SPI_SS_TX_ADC 64 +#define SPI_SS_TX_DB 128 +#define SPI_SS_ADS64P44 256 + +// Masks for different parts of CTRL reg +#define SPI_CTRL_ASS (1<<13) +#define SPI_CTRL_IE (1<<12) +#define SPI_CTRL_LSB (1<<11) +#define SPI_CTRL_TXNEG (1<<10) +#define SPI_CTRL_RXNEG (1<< 9) +#define SPI_CTRL_GO_BSY (1<< 8) +#define SPI_CTRL_CHAR_LEN_MASK 0x7F + +//////////////////////////////////////////////// +// I2C, Slave 3 +// See Wishbone I2C-Master Core Specification. + +#define I2C_BASE 0xC400 + +typedef struct { + volatile uint32_t prescaler_lo; // r/w + volatile uint32_t prescaler_hi; // r/w + volatile uint32_t ctrl; // r/w + volatile uint32_t data; // wr = transmit reg; rd = receive reg + volatile uint32_t cmd_status; // wr = command reg; rd = status reg +} i2c_regs_t; + +#define i2c_regs ((i2c_regs_t *) I2C_BASE) + +#define I2C_CTRL_EN (1 << 7) // core enable +#define I2C_CTRL_IE (1 << 6) // interrupt enable + +// +// STA, STO, RD, WR, and IACK bits are cleared automatically +// +#define I2C_CMD_START (1 << 7) // generate (repeated) start condition +#define I2C_CMD_STOP (1 << 6) // generate stop condition +#define I2C_CMD_RD (1 << 5) // read from slave +#define I2C_CMD_WR (1 << 4) // write to slave +#define I2C_CMD_NACK (1 << 3) // when a rcvr, send ACK (ACK=0) or NACK (ACK=1) +#define I2C_CMD_RSVD_2 (1 << 2) // reserved +#define I2C_CMD_RSVD_1 (1 << 1) // reserved +#define I2C_CMD_IACK (1 << 0) // set to clear pending interrupt + +#define I2C_ST_RXACK (1 << 7) // Received acknowledgement from slave (1 = NAK, 0 = ACK) +#define I2C_ST_BUSY (1 << 6) // 1 after START signal detected; 0 after STOP signal detected +#define I2C_ST_AL (1 << 5) // Arbitration lost. 1 when core lost arbitration +#define I2C_ST_RSVD_4 (1 << 4) // reserved +#define I2C_ST_RSVD_3 (1 << 3) // reserved +#define I2C_ST_RSVD_2 (1 << 2) // reserved +#define I2C_ST_TIP (1 << 1) // Transfer-in-progress +#define I2C_ST_IP (1 << 0) // Interrupt pending + + +//////////////////////////////////////////////// +// GPIO, Slave 4 +// +// These go to the daughterboard i/o pins + +#define GPIO_BASE 0xC800 + +typedef struct { + volatile uint32_t io; // tx data in high 16, rx in low 16 + volatile uint32_t ddr; // 32 bits, 1 means output. tx in high 16, rx in low 16 + volatile uint32_t tx_sel; // 16 2-bit fields select which source goes to TX DB + volatile uint32_t rx_sel; // 16 2-bit fields select which source goes to RX DB +} gpio_regs_t; + +// each 2-bit sel field is layed out this way +#define GPIO_SEL_SW 0 // if pin is an output, set by software in the io reg +#define GPIO_SEL_ATR 1 // if pin is an output, set by ATR logic +#define GPIO_SEL_DEBUG_0 2 // if pin is an output, debug lines from FPGA fabric +#define GPIO_SEL_DEBUG_1 3 // if pin is an output, debug lines from FPGA fabric + +#define gpio_base ((gpio_regs_t *) GPIO_BASE) + +/////////////////////////////////////////////////// +// Buffer Pool Status, Slave 5 +// +// The buffers themselves are located in Slave 1, Buffer Pool RAM. +// The status registers are in Slave 5, Buffer Pool Status. +// The control register is in Slave 7, Settings Bus. + +#define BUFFER_POOL_STATUS_BASE 0xCC00 + +typedef struct { + volatile uint32_t last_line[NBUFFERS]; // last line xfer'd in buffer + volatile uint32_t status; // error and done flags + volatile uint32_t hw_config; // see below + volatile uint32_t dummy[3]; + volatile uint32_t irqs; + volatile uint32_t pri_enc_bp_status; + volatile uint32_t cycle_count; +} buffer_pool_status_t; + +#define buffer_pool_status ((buffer_pool_status_t *) BUFFER_POOL_STATUS_BASE) + +/* + * Buffer n's xfer is done. + * Clear this bit by issuing bp_clear_buf(n) + */ +#define BPS_DONE(n) (0x00000001 << (n)) +#define BPS_DONE_0 BPS_DONE(0) +#define BPS_DONE_1 BPS_DONE(1) +#define BPS_DONE_2 BPS_DONE(2) +#define BPS_DONE_3 BPS_DONE(3) +#define BPS_DONE_4 BPS_DONE(4) +#define BPS_DONE_5 BPS_DONE(5) +#define BPS_DONE_6 BPS_DONE(6) +#define BPS_DONE_7 BPS_DONE(7) + +/* + * Buffer n's xfer had an error. + * Clear this bit by issuing bp_clear_buf(n) + */ +#define BPS_ERROR(n) (0x00000100 << (n)) +#define BPS_ERROR_0 BPS_ERROR(0) +#define BPS_ERROR_1 BPS_ERROR(1) +#define BPS_ERROR_2 BPS_ERROR(2) +#define BPS_ERROR_3 BPS_ERROR(3) +#define BPS_ERROR_4 BPS_ERROR(4) +#define BPS_ERROR_5 BPS_ERROR(5) +#define BPS_ERROR_6 BPS_ERROR(6) +#define BPS_ERROR_7 BPS_ERROR(7) + +/* + * Buffer n is idle. A buffer is idle if it's not + * DONE, ERROR, or processing a transaction. If it's + * IDLE, it's safe to start a new transaction. + * + * Clear this bit by starting a xfer with + * bp_send_from_buf or bp_receive_to_buf. + */ +#define BPS_IDLE(n) (0x00010000 << (n)) +#define BPS_IDLE_0 BPS_IDLE(0) +#define BPS_IDLE_1 BPS_IDLE(1) +#define BPS_IDLE_2 BPS_IDLE(2) +#define BPS_IDLE_3 BPS_IDLE(3) +#define BPS_IDLE_4 BPS_IDLE(4) +#define BPS_IDLE_5 BPS_IDLE(5) +#define BPS_IDLE_6 BPS_IDLE(6) +#define BPS_IDLE_7 BPS_IDLE(7) + +/* + * Buffer n has a "slow path" packet in it. + * This bit is orthogonal to the bits above and indicates that + * the FPGA ethernet rx protocol engine has identified this packet + * as one requiring firmware intervention. + */ +#define BPS_SLOWPATH(n) (0x01000000 << (n)) +#define BPS_SLOWPATH_0 BPS_SLOWPATH(0) +#define BPS_SLOWPATH_1 BPS_SLOWPATH(1) +#define BPS_SLOWPATH_2 BPS_SLOWPATH(2) +#define BPS_SLOWPATH_3 BPS_SLOWPATH(3) +#define BPS_SLOWPATH_4 BPS_SLOWPATH(4) +#define BPS_SLOWPATH_5 BPS_SLOWPATH(5) +#define BPS_SLOWPATH_6 BPS_SLOWPATH(6) +#define BPS_SLOWPATH_7 BPS_SLOWPATH(7) + + +#define BPS_DONE_ALL 0x000000ff // mask of all dones +#define BPS_ERROR_ALL 0x0000ff00 // mask of all errors +#define BPS_IDLE_ALL 0x00ff0000 // mask of all idles +#define BPS_SLOWPATH_ALL 0xff000000 // mask of all slowpaths + +// The hw_config register + +#define HWC_SIMULATION 0x80000000 +#define HWC_WB_CLK_DIV_MASK 0x0000000f + +/*! + * \brief return non-zero if we're running under the simulator + */ +inline static int +hwconfig_simulation_p(void) +{ + return buffer_pool_status->hw_config & HWC_SIMULATION; +} + +/*! + * \brief Return Wishbone Clock divisor. + * The processor runs at the Wishbone Clock rate which is MASTER_CLK_RATE / divisor. + */ +inline static int +hwconfig_wishbone_divisor(void) +{ + return buffer_pool_status->hw_config & HWC_WB_CLK_DIV_MASK; +} + +/////////////////////////////////////////////////// +// Ethernet Core, Slave 6 + +#define ETH_BASE 0xD000 + +#include "eth_mac_regs.h" + +#define eth_mac ((eth_mac_regs_t *) ETH_BASE) + +//////////////////////////////////////////////////// +// Settings Bus, Slave #7, Not Byte Addressable! +// +// Output-only from processor point-of-view. +// 1KB of address space (== 256 32-bit write-only regs) + + +#define MISC_OUTPUT_BASE 0xD400 +#define TX_PROTOCOL_ENGINE_BASE 0xD480 +#define RX_PROTOCOL_ENGINE_BASE 0xD4C0 +#define BUFFER_POOL_CTRL_BASE 0xD500 +#define LAST_SETTING_REG 0xD7FC // last valid setting register + +#define SR_MISC 0 +#define SR_TX_PROT_ENG 32 +#define SR_RX_PROT_ENG 48 +#define SR_BUFFER_POOL_CTRL 64 +#define SR_UDP_SM 96 +#define SR_TX_DSP 208 +#define SR_TX_CTRL 224 +#define SR_RX_DSP 160 +#define SR_RX_CTRL 176 +#define SR_TIME64 192 +#define SR_SIMTIMER 198 +#define SR_LAST 255 + +#define _SR_ADDR(sr) (MISC_OUTPUT_BASE + (sr) * sizeof(uint32_t)) + +// --- buffer pool control regs --- + +typedef struct { + volatile uint32_t ctrl; +} buffer_pool_ctrl_t; + +// buffer pool ports + +#define PORT_SERDES 0 // serial/deserializer +#define PORT_DSP 1 // DSP tx or rx pipeline +#define PORT_ETH 2 // ethernet tx or rx +#define PORT_RAM 3 // RAM tx or rx + +// the buffer pool ctrl register fields + +#define BPC_BUFFER(n) (((n) & 0xf) << 28) +#define BPC_BUFFER_MASK BPC_BUFFER(~0) +#define BPC_BUFFER_0 BPC_BUFFER(0) +#define BPC_BUFFER_1 BPC_BUFFER(1) +#define BPC_BUFFER_2 BPC_BUFFER(2) +#define BPC_BUFFER_3 BPC_BUFFER(3) +#define BPC_BUFFER_4 BPC_BUFFER(4) +#define BPC_BUFFER_5 BPC_BUFFER(5) +#define BPC_BUFFER_6 BPC_BUFFER(6) +#define BPC_BUFFER_7 BPC_BUFFER(7) +#define BPC_BUFFER_NIL BPC_BUFFER(0x8) // disable + +#define BPC_PORT(n) (((n) & 0x7) << 25) +#define BPC_PORT_MASK BPC_PORT(~0) +#define BPC_PORT_SERDES BPC_PORT(PORT_SERDES) +#define BPC_PORT_DSP BPC_PORT(PORT_DSP) +#define BPC_PORT_ETH BPC_PORT(PORT_ETH) +#define BPC_PORT_RAM BPC_PORT(PORT_RAM) +#define BPC_PORT_NIL BPC_PORT(0x4) // disable + +#define BPC_CLR (1 << 24) // mutually excl commands +#define BPC_READ (1 << 23) +#define BPC_WRITE (1 << 22) + +#define BPC_STEP(step) (((step) & 0xf) << 18) +#define BPC_STEP_MASK BPC_STEP(~0) +#define BPC_LAST_LINE(line) (((line) & 0x1ff) << 9) +#define BPC_LAST_LINE_MASK BPC_LAST_LINE(~0) +#define BPC_FIRST_LINE(line) (((line) & 0x1ff) << 0) +#define BPC_FIRST_LINE_MASK BPC_FIRST_LINE(~0) + +#define buffer_pool_ctrl ((buffer_pool_ctrl_t *) BUFFER_POOL_CTRL_BASE) + +// --- misc outputs --- + +typedef struct { + volatile uint32_t clk_ctrl; + volatile uint32_t serdes_ctrl; + volatile uint32_t adc_ctrl; + volatile uint32_t leds; + volatile uint32_t phy_ctrl; // LSB is reset line to eth phy + volatile uint32_t debug_mux_ctrl; + volatile uint32_t ram_page; // FIXME should go somewhere else... + volatile uint32_t flush_icache; // Flush the icache + volatile uint32_t led_src; // HW or SW control for LEDs +} output_regs_t; + +#define CLK_RESET (1<<4) +#define CLK_ENABLE (1<<3) | (1<<2) +#define CLK_SEL (1<<1) | (1<<0) + +#define SERDES_ENABLE 8 +#define SERDES_PRBSEN 4 +#define SERDES_LOOPEN 2 +#define SERDES_RXEN 1 + +#define ADC_CTRL_ON 0x0F +#define ADC_CTRL_OFF 0x00 + +// crazy order that matches the labels on the case + +#define LED_A (1 << 4) +#define LED_B (1 << 1) +#define LED_C (1 << 3) +#define LED_D (1 << 0) +#define LED_E (1 << 2) +// LED_F // controlled by CPLD +#define LED_RJ45 (1 << 5) + +#define output_regs ((output_regs_t *) MISC_OUTPUT_BASE) + +// --- udp tx regs --- + +typedef struct { + // Bits 19:16 are control info; bits 15:0 are data (see below) + // First two words are unused. + volatile uint32_t _nope[2]; + //--- ethernet header - 14 bytes--- + volatile struct{ + uint32_t mac_dst_0_1; //word 2 + uint32_t mac_dst_2_3; + uint32_t mac_dst_4_5; + uint32_t mac_src_0_1; + uint32_t mac_src_2_3; + uint32_t mac_src_4_5; + uint32_t ether_type; //word 8 + } eth_hdr; + //--- ip header - 20 bytes --- + volatile struct{ + uint32_t ver_ihl_tos; //word 9 + uint32_t total_length; + uint32_t identification; + uint32_t flags_frag_off; + uint32_t ttl_proto; + uint32_t checksum; + uint32_t src_addr_high; + uint32_t src_addr_low; + uint32_t dst_addr_high; + uint32_t dst_addr_low; //word 18 + } ip_hdr; + //--- udp header - 8 bytes --- + volatile struct{ + uint32_t src_port; //word 19 + uint32_t dst_port; + uint32_t length; + uint32_t checksum; //word 22 + } udp_hdr; + volatile uint32_t _pad[32-23]; +} sr_udp_sm_t; + +// control bits (all expect UDP_SM_LAST_WORD are mutually exclusive) + +// This is the last word of the header +#define UDP_SM_LAST_WORD (1 << 19) + +// Insert IP header checksum here. Data is the xor of 16'hFFFF and +// the values written into regs 9-13 and 15-18. +#define UDP_SM_INS_IP_HDR_CHKSUM (1 << 18) + +// Insert IP Length here (data ignored) +#define UDP_SM_INS_IP_LEN (1 << 17) + +// Insert UDP Length here (data ignore) +#define UDP_SM_INS_UDP_LEN (1 << 16) + +#define sr_udp_sm ((sr_udp_sm_t *) _SR_ADDR(SR_UDP_SM)) + +// --- dsp tx regs --- + +#define MIN_CIC_INTERP 1 +#define MAX_CIC_INTERP 128 + +typedef struct { + volatile uint32_t num_chan; + volatile uint32_t clear_state; // clears out state machine, fifos, +} sr_tx_ctrl_t; + +#define sr_tx_ctrl ((sr_tx_ctrl_t *) _SR_ADDR(SR_TX_CTRL)) + +typedef struct { + volatile int32_t freq; + volatile uint32_t scale_iq; // {scale_i,scale_q} + volatile uint32_t interp_rate; + volatile uint32_t _padding0; // padding for the tx_mux + // NOT freq, scale, interp + /*! + * \brief output mux configuration. + * + * 
+   *     3                   2                   1                       
+   *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+   *  +-------------------------------+-------+-------+-------+-------+
+   *  |                                               | DAC1  |  DAC0 |
+   *  +-------------------------------+-------+-------+-------+-------+
+   * 
+   *  There are N DUCs (1 now) with complex inputs and outputs.
+   *  There are two DACs.
+   * 
+   *  Each 4-bit DACx field specifies the source for the DAC
+   *  Each subfield is coded like this: 
+   * 
+   *     3 2 1 0
+   *    +-------+
+   *    |   N   |
+   *    +-------+
+   * 
+   *  N specifies which DUC output is connected to this DAC.
+   * 
+   *   N   which interp output
+   *  ---  -------------------
+   *   0   DUC 0 I
+   *   1   DUC 0 Q
+   *   2   DUC 1 I
+   *   3   DUC 1 Q
+   *   F   All Zeros
+   *   
+   * The default value is 0x10
+   *
+ */ + volatile uint32_t tx_mux; + +} dsp_tx_regs_t; + +#define dsp_tx_regs ((dsp_tx_regs_t *) _SR_ADDR(SR_TX_DSP)) + +// --- VITA RX CTRL regs --- +typedef struct { + // The following 3 are logically a single command register. + // They are clocked into the underlying fifo when time_ticks is written. + volatile uint32_t cmd; // {now, chain, num_samples(30) + volatile uint32_t time_secs; + volatile uint32_t time_ticks; + + volatile uint32_t clear_overrun; // write anything to clear overrun + volatile uint32_t vrt_header; // word 0 of packet. FPGA fills in packet counter + volatile uint32_t vrt_stream_id; // word 1 of packet. + volatile uint32_t vrt_trailer; + volatile uint32_t nsamples_per_pkt; + volatile uint32_t nchannels; // 1 in basic case, up to 4 for vector sources + volatile uint32_t pad[7]; // Make each structure 16 elements long +} sr_rx_ctrl_t; + +#define sr_rx_ctrl ((sr_rx_ctrl_t *) _SR_ADDR(SR_RX_CTRL)) + +// --- dsp rx regs --- +#define MIN_CIC_DECIM 1 +#define MAX_CIC_DECIM 128 + +typedef struct { + volatile int32_t freq; + volatile uint32_t scale_iq; // {scale_i,scale_q} + volatile uint32_t decim_rate; + volatile uint32_t dcoffset_i; // Bit 31 high sets fixed offset mode, using lower 14 bits, + // otherwise it is automatic + volatile uint32_t dcoffset_q; // Bit 31 high sets fixed offset mode, using lower 14 bits + + /*! + * \brief input mux configuration. + * + * This determines which ADC (or constant zero) is connected to + * each DDC input. There are N DDCs (1 now). Each has two inputs. + * + * 
+   * Mux value:
+   *
+   *    3                   2                   1                       
+   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+   * +-------+-------+-------+-------+-------+-------+-------+-------+
+   * |                                                       |Q0 |I0 |
+   * +-------+-------+-------+-------+-------+-------+-------+-------+
+   *
+   * Each 2-bit I field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
+   * Each 2-bit Q field is either 00 (A/D A), 01 (A/D B) or 1X (const zero)
+   *
+   * The default value is 0x4
+   *
+ */ + volatile uint32_t rx_mux; // called adc_mux in dsp_core_rx.v + + /*! + * \brief Streaming GPIO configuration + * + * This determines whether the LSBs of I and Q samples come from the DSP + * pipeline or from the io_rx GPIO pins. To stream GPIO, one must first + * set the GPIO data direction register to have io_rx[15] and/or io_rx[14] + * configured as inputs. The GPIO pins will be sampled at the time the + * remainder of the DSP sample is strobed into the RX sample FIFO. There + * will be a decimation-dependent fixed time offset between the GPIO + * sample stream and the associated RF samples. + * + * 3 2 1 + * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * | MBZ |Q|I| + * +-------+-------+-------+-------+-------+-------+-------+-------+ + * + * I 0=LSB comes from DSP pipeline (default) + * 1=LSB comes from io_rx[15] + * + * Q 0=LSB comes from DSP pipeline (default) + * 1=LSB comes from io_rx[14] + */ + volatile uint32_t gpio_stream_enable; + +} dsp_rx_regs_t; + +#define dsp_rx_regs ((dsp_rx_regs_t *) _SR_ADDR(SR_RX_DSP)) + +// ---------------------------------------------------------------- +// VITA49 64 bit time (write only) + /*! + * \brief Time 64 flags + * + * 
+   *
+   *    3                   2                   1                       
+   *  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+   * +-----------------------------------------------------------+-+-+
+   * |                                                           |S|P|
+   * +-----------------------------------------------------------+-+-+
+   *
+   * P - PPS edge selection (0=negedge, 1=posedge, default=0)
+   * S - Source (0=sma, 1=mimo, 0=default)
+   *
+   *
+ */ +typedef struct { + volatile uint32_t secs; // value to set absolute secs to on next PPS + volatile uint32_t ticks; // value to set absolute ticks to on next PPS + volatile uint32_t flags; // flags - see chart above + volatile uint32_t imm; // set immediate (0=latch on next pps, 1=latch immediate, default=0) +} sr_time64_t; + +#define sr_time64 ((sr_time64_t *) _SR_ADDR(SR_TIME64)) + + +/* + * --- ethernet tx protocol engine regs (write only) --- + * + * These registers control the transmit portion of the ethernet + * protocol engine (out of USRP2). The protocol engine handles fifo + * status and sequence number insertion in outgoing packets, and + * automagically generates status packets when required to inform the + * host of changes in fifo availability. + * + * All outgoing packets have their fifo_status field set to the number + * of 32-bit lines of fifo available in the ethernet Rx fifo (see + * usrp2_eth_packet.h). Seqno's are set if FIXME, else 0. + * + * FIXME clean this up once we know how it's supposed to behave. + */ + +typedef struct { + volatile uint32_t flags; // not yet fully defined (channel?) + volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr + volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr + volatile uint32_t mac_src2345; // 4 bytes of destination mac addr + volatile uint32_t seqno; // Write to init seqno. It autoincs on match +} tx_proto_engine_regs_t; + +#define tx_proto_engine ((tx_proto_engine_regs_t *) TX_PROTOCOL_ENGINE_BASE) + +/* + * --- ethernet rx protocol engine regs (write only) --- + * + * These registers control the receive portion of the ethernet + * protocol engine (into USRP2). The protocol engine offloads common + * packet inspection operations so that firmware has less to do on + * "fast path" packets. + * + * The registers define conditions which must be matched for a packet + * to be considered a "fast path" packet. If a received packet + * matches the src and dst mac address, ethertype, flags field, and + * expected seqno number it is considered a "fast path" packet, and + * the expected seqno is updated. If the packet fails to satisfy any + * of the above conditions it's a "slow path" packet, and the + * corresponding SLOWPATH flag will be set buffer_status register. + */ + +typedef struct { + volatile uint32_t flags; // not yet fully defined (channel?) + volatile uint32_t mac_dst0123; // 4 bytes of destination mac addr + volatile uint32_t mac_dst45src01; // 2 bytes of dest mac addr; 2 bytes of src mac addr + volatile uint32_t mac_src2345; // 4 bytes of destination mac addr + volatile uint32_t ethertype_pad; // ethertype in high 16-bits +} rx_proto_engine_regs_t; + +#define rx_proto_engine ((rx_proto_engine_regs_t *) RX_PROTOCOL_ENGINE_BASE) + + + +/////////////////////////////////////////////////// +// Simple Programmable Interrupt Controller, Slave 8 + +#define PIC_BASE 0xD800 + +// Interrupt request lines +// Bit numbers (LSB == 0) that correpond to interrupts into PIC + +#define IRQ_BUFFER 0 // buffer manager +#define IRQ_ONETIME 1 +#define IRQ_SPI 2 +#define IRQ_I2C 3 +#define IRQ_PHY 4 // ethernet PHY +#define IRQ_UNDERRUN 5 +#define IRQ_OVERRUN 6 +#define IRQ_PPS 7 // pulse per second +#define IRQ_UART_RX 8 +#define IRQ_UART_TX 9 +#define IRQ_SERDES 10 +#define IRQ_CLKSTATUS 11 +#define IRQ_PERIODIC 12 + +#define IRQ_TO_MASK(x) (1 << (x)) + +#define PIC_BUFFER_INT IRQ_TO_MASK(IRQ_BUFFER) +#define PIC_ONETIME_INT IRQ_TO_MASK(IRQ_ONETIME) +#define PIC_SPI_INT IRQ_TO_MASK(IRQ_SPI) +#define PIC_I2C_INT IRQ_TO_MASK(IRQ_I2C) +#define PIC_PHY_INT IRQ_TO_MASK(IRQ_PHY) +#define PIC_UNDERRUN_INT IRQ_TO_MASK(IRQ_UNDERRUN) +#define PIC_OVERRUN_INT IRQ_TO_MASK(IRQ_OVERRUN) +#define PIC_PPS_INT IRQ_TO_MASK(IRQ_PPS) +#define PIC_UART_RX_INT IRQ_TO_MASK(IRQ_UART_RX) +#define PIC_UART_TX_INT IRQ_TO_MASK(IRQ_UART_TX) +#define PIC_SERDES IRQ_TO_MASK(IRQ_SERDES) +#define PIC_CLKSTATUS IRQ_TO_MASK(IRQ_CLKSTATUS) + +typedef struct { + volatile uint32_t edge_enable; // mask: 1 -> edge triggered, 0 -> level + volatile uint32_t polarity; // mask: 1 -> rising edge + volatile uint32_t mask; // mask: 1 -> disabled + volatile uint32_t pending; // mask: 1 -> pending; write 1's to clear pending ints +} pic_regs_t; + +#define pic_regs ((pic_regs_t *) PIC_BASE) + +// ---------------------------------------------------------------- +// WB_CLK_RATE is the time base for this +typedef struct { + volatile uint32_t onetime; // Number of wb clk cycles till the onetime interrupt + volatile uint32_t periodic; // Repeat rate of periodic interrupt +} sr_simple_timer_t; + +#define sr_simple_timer ((sr_simple_timer_t *) _SR_ADDR(SR_SIMTIMER)) + +/////////////////////////////////////////////////// +// UART, Slave 10 + +#define UART_BASE 0xE000 + +typedef struct { + // All elements are 8 bits except for clkdiv (16), but we use uint32 to make + // the hardware for decoding easier + volatile uint32_t clkdiv; // Set to 50e6 divided by baud rate (no x16 factor) + volatile uint32_t txlevel; // Number of spaces in the FIFO for writes + volatile uint32_t rxlevel; // Number of available elements in the FIFO for reads + volatile uint32_t txchar; // Write characters to be sent here + volatile uint32_t rxchar; // Read received characters here +} uart_regs_t; + +#define uart_regs ((uart_regs_t *) UART_BASE) + +/////////////////////////////////////////////////// +// ATR Controller, Slave 11 + +#define ATR_BASE 0xE400 + +typedef struct { + volatile uint32_t v[16]; +} atr_regs_t; + +#define ATR_IDLE 0x0 // indicies into v +#define ATR_TX 0x1 +#define ATR_RX 0x2 +#define ATR_FULL 0x3 + +#define atr_regs ((atr_regs_t *) ATR_BASE) + +/////////////////////////////////////////////////// +// SD Card SPI interface, Slave 13 +// All regs are 8 bits wide, but are accessed as if they are 32 bits + +#define SDSPI_BASE 0xEC00 + +typedef struct { + volatile uint32_t status; // Write a 1 or 0 for controlling CS + volatile uint32_t clkdiv; + volatile uint32_t send_dat; + volatile uint32_t receive_dat; +} sdspi_regs_t; + +#define sdspi_regs ((sdspi_regs_t *) SDSPI_BASE) + +/////////////////////////////////////////////////// +// External RAM interface, Slave 14 +// Pages are 1K. Page is 10 bits, set by a control register +// output_regs->ram_page + +#define EXTRAM_BASE 0xF000 +#define extram ((volatile uint32_t *) EXTRAM_BASE) + + +/////////////////////////////////////////////////// + +#endif + diff --git a/firmware/microblaze/usrp2/sd.c b/firmware/microblaze/usrp2/sd.c new file mode 100644 index 000000000..d000b28ae --- /dev/null +++ b/firmware/microblaze/usrp2/sd.c @@ -0,0 +1,197 @@ +/* -*- c -*- */ +/* + * Copyright 2008 Ettus Research LLC + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "sd.h" +#include "memory_map.h" +#include "stdint.h" +#include "stdio.h" + +static inline void +sd_packarg(unsigned char *argument,unsigned int value) +{ + argument[3] = (unsigned char)(value >> 24); + argument[2] = (unsigned char)(value >> 16); + argument[1] = (unsigned char)(value >> 8); + argument[0] = (unsigned char)(value); +} + +int +sd_init(void) +{ + unsigned char response[5]; + unsigned char argument[4]; + int i,j; + + for(i=0;i<4;i++) + argument[i] = 0; + + // Set clock to less than 400 kHz to start out + sdspi_regs->clkdiv = 128; + + // Delay at least 74 cycles + sd_assert_cs(); + for(i = 0; i < 100; i++) + sd_send_byte(SD_IDLE); + sd_deassert_cs(); + + // Initialization Sequence -- CMD0 CMD55 ACMD41 CMD58 + // Put card in idle state + if(sd_send_command(SD_CMD0,SD_CMD0_R,response,argument)==0) + return 0; // Something went wrong in command + + j = 0; + do { + j++; + if(sd_send_command(SD_CMD55,SD_CMD55_R,response,argument)==1) + sd_send_command(SD_ACMD41,SD_ACMD41_R,response,argument); + else + j = SD_IDLE_WAIT_MAX; + } + while(((response[0] & SD_MSK_IDLE) == SD_MSK_IDLE) && (j < SD_IDLE_WAIT_MAX)); + + if(j>= SD_IDLE_WAIT_MAX) // IDLE timeout exceeded, card asleep + return 0; + + // CMD58 reads the SD card capabilities + if(sd_send_command(SD_CMD58,SD_CMD58_R,response,argument)==0) + return 0; // CMD58 FAIL + + if((response[2] & SD_MSK_OCR_33) != SD_MSK_OCR_33) + return 0; // Card doesn't do 3.3V + + //printf("OCR = %x %x %x %x\n",response[0],response[1],response[2],response[3]); + + // Set blocklen here + sd_packarg(argument,SD_BLOCKLEN); + if(sd_send_command(SD_CMD16,SD_CMD16_R,response,argument)==0) + return 0; // Set Blocklen failed + + // Reset back to high speed + sdspi_regs->clkdiv = 4; + //puts("finished init\n"); + return 1; +} + +int sd_send_command(unsigned char cmd,unsigned char response_type, + unsigned char *response,unsigned char *argument) +{ + int i; + char response_length; + unsigned char tmp; + + sd_assert_cs(); + sd_send_byte((cmd & 0x3F) | 0x40); + for(i=3;i>=0;i--) + sd_send_byte(argument[i]); + sd_send_byte(SD_CRC); // Always the same + + response_length = 0; + switch(response_type) + { + case SD_R1: + case SD_R1B: + response_length = 1; + break; + case SD_R2: + response_length = 2; + break; + case SD_R3: + response_length = 5; + break; + default: + break; + } + + // Wait for a response, which will have a 0 start bit + i = 0; + do + { + tmp = sd_rcv_byte(); + i++; + } + while(((tmp & 0x80) != 0) && i < SD_CMD_TIMEOUT); + + if(i>= SD_CMD_TIMEOUT) + { + sd_deassert_cs(); + //puts("cmd send timeout\n"); + return 0; + } + + for(i=response_length-1; i>=0; i--) + { + response[i] = tmp; + tmp = sd_rcv_byte(); + } + i = 0; + if(response_type == SD_R1B) + { + do + { + i++; + tmp = sd_rcv_byte(); + } + while(tmp != SD_IDLE); + sd_send_byte(SD_IDLE); + } + + //puts("send cmd success\n"); + sd_deassert_cs(); + return 1; +} + +int +sd_read_block (unsigned int blockaddr, unsigned char *buf) +{ + unsigned char response[5]; + unsigned char argument[4]; + unsigned int i = 0; + unsigned char tmp; + + blockaddr <<= SD_BLOCKLEN_NBITS; + sd_packarg(argument,blockaddr); + if(sd_send_command(SD_CMD17,SD_CMD17_R,response,argument)==0) + return 0; //Failed READ; + if(response[0] != 0) + return 0; //Misaligned READ + + sd_assert_cs(); + i = 0; + do + { + tmp = sd_rcv_byte(); + i++; + } + while((tmp == 0xFF) && (i < SD_RD_TIMEOUT)); + if((i>= SD_RD_TIMEOUT) ||((tmp & SD_MSK_TOK_DATAERROR) == 0)) + { + sd_send_byte(SD_IDLE); // Send a dummy before quitting + return 0; // Data ERROR + } + for(i=0;i. + */ + +#ifndef INCLUDED_SD_H +#define INCLUDED_SD_H + +#include "memory_map.h" + +#define SD_READY 1 +#define SD_IDLE_WAIT_MAX 100 +#define SD_CMD_TIMEOUT 100 +#define SD_RD_TIMEOUT 1000 + +#define SD_CMD0 0 +#define SD_CMD1 1 +#define SD_CMD9 9 +#define SD_CMD10 10 +#define SD_CMD12 12 +#define SD_CMD13 13 +#define SD_CMD16 16 +#define SD_CMD17 17 +#define SD_CMD18 18 +#define SD_CMD24 24 +#define SD_CMD25 25 +#define SD_CMD27 27 +#define SD_CMD28 28 +#define SD_CMD29 29 +#define SD_CMD30 30 +#define SD_CMD32 32 +#define SD_CMD33 33 +#define SD_CMD38 38 +#define SD_CMD55 55 +#define SD_CMD58 58 +#define SD_CMD59 59 +#define SD_ACMD41 41 +#define SD_IDLE 0xFF +#define SD_CRC 0x95 + +#define SD_R1 1 +#define SD_R1B 2 +#define SD_R2 3 +#define SD_R3 4 + +#define SD_CMD0_R SD_R1 +#define SD_CMD16_R SD_R1 +#define SD_CMD17_R SD_R1 +#define SD_CMD55_R SD_R1 +#define SD_ACMD41_R SD_R1 +#define SD_CMD58_R SD_R3 + +#define SD_BLOCKLEN 512 +#define SD_BLOCKLEN_NBITS 9 + +#define SD_MSK_IDLE 0x01 +#define SD_MSK_OCR_33 0xC0 +#define SD_MSK_TOK_DATAERROR 0xE0 + + +int sd_init(void); + +static inline void +sd_assert_cs(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->status = 1; +} + +static inline void +sd_deassert_cs(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->status = 0; +} + +static inline char +sd_rcv_byte(void) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; + sdspi_regs->send_dat = SD_IDLE; + while(sdspi_regs->status != SD_READY) + ; + return sdspi_regs-> receive_dat; +} + +static inline void +sd_send_byte(char dat) +{ + // Wait for idle before doing anything + while(sdspi_regs->status != SD_READY) + ; // Wait for status = 1 (ready) + sdspi_regs->send_dat = dat; +} + + +int sd_send_command(unsigned char cmd,unsigned char response_type, + unsigned char *response,unsigned char *argument); + +int sd_read_block (unsigned int blockaddr, unsigned char *buf); +int sd_write_block(unsigned int blockaddr, const unsigned char *buf); + +#endif /* INCLUDED_SD_H */ -- cgit v1.2.3