From e0005a2a00b49b1c6802fd7e78e8f92ff22a6bce Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Fri, 7 Jan 2011 11:51:31 -0800 Subject: usrp2: tweaking firmware added delay to the link up/down code to space out calls removed the pkt_ctrl init and just do it when the mode changes tweaked the addr printing --- firmware/zpu/apps/txrx_uhd.c | 19 ++++++++----------- 1 file changed, 8 insertions(+), 11 deletions(-) (limited to 'firmware/zpu/apps') diff --git a/firmware/zpu/apps/txrx_uhd.c b/firmware/zpu/apps/txrx_uhd.c index cd66c18f1..3fcda8a4e 100644 --- a/firmware/zpu/apps/txrx_uhd.c +++ b/firmware/zpu/apps/txrx_uhd.c @@ -77,14 +77,14 @@ static void handle_udp_data_packet( sr_udp_sm->dsp0_port = (((uint32_t)dst.port) << 16) | src.port; printf("Storing for fast path:\n"); printf(" source mac addr: "); - print_mac_addr(fp_mac_addr_src.addr); newline(); + print_mac_addr(&fp_mac_addr_src); newline(); printf(" source ip addr: "); - print_ip_addr(&fp_socket_src.addr); newline(); + print_ip_addr(&fp_socket_src); newline(); printf(" source udp port: %d\n", fp_socket_src.port); printf(" destination mac addr: "); - print_mac_addr(fp_mac_addr_dst.addr); newline(); + print_mac_addr(&fp_mac_addr_dst); newline(); printf(" destination ip addr: "); - print_ip_addr(&fp_socket_dst.addr); newline(); + print_ip_addr(&fp_socket_dst); newline(); printf(" destination udp port: %d\n", fp_socket_dst.port); newline(); @@ -332,7 +332,6 @@ int main(void) { u2_init(); - pkt_ctrl_init(); //we do this to see if we should set a default ip addr or not #ifdef USRP2P @@ -344,9 +343,8 @@ main(void) } #endif - putstr("\nTxRx-NEWETH\n"); - print_mac_addr(ethernet_mac_addr()->addr); - newline(); + putstr("\nTxRx-UHD-ZPU\n"); + print_mac_addr(ethernet_mac_addr()); newline(); print_ip_addr(get_ip_addr()); newline(); printf("FPGA compatibility number: %d\n", USRP2_FPGA_COMPAT_NUM); printf("Firmware compatibility number: %d\n", USRP2_FW_COMPAT_NUM); @@ -364,9 +362,8 @@ main(void) register_udp_listener(USRP2_UDP_UPDATE_PORT, handle_udp_fw_update_packet); #endif - //3) set the routing mode to slave and send a garp + //3) set the routing mode to slave to set defaults pkt_ctrl_set_routing_mode(PKT_CTRL_ROUTING_MODE_SLAVE); - send_gratuitous_arp(); //4) setup ethernet hardware to bring the link up ethernet_register_link_changed_callback(link_changed_callback); @@ -390,7 +387,7 @@ main(void) } if (pending & PIC_OVERRUN_INT){ - pic_regs->pending = PIC_OVERRUN_INT; // clear pending interrupt + pic_regs->pending = PIC_OVERRUN_INT; // clear interrupt putchar('O'); } } -- cgit v1.2.3