From 901bfcbd2bbfe537dead32d08cdf06b7319d9ec6 Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Mon, 10 Jan 2011 13:35:32 -0800 Subject: usrp2: removed cruft and bitrot apps from fw --- firmware/zpu/apps/cruft/rcv_eth_packets.c | 233 ------------------------------ 1 file changed, 233 deletions(-) delete mode 100644 firmware/zpu/apps/cruft/rcv_eth_packets.c (limited to 'firmware/zpu/apps/cruft/rcv_eth_packets.c') diff --git a/firmware/zpu/apps/cruft/rcv_eth_packets.c b/firmware/zpu/apps/cruft/rcv_eth_packets.c deleted file mode 100644 index 03fc94354..000000000 --- a/firmware/zpu/apps/cruft/rcv_eth_packets.c +++ /dev/null @@ -1,233 +0,0 @@ -/* - * Copyright 2007 Free Software Foundation, Inc. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifdef HAVE_CONFIG_H -#include "config.h" -#endif -#include "u2_init.h" -#include "memory_map.h" -#include "spi.h" -#include "hal_io.h" -#include "buffer_pool.h" -#include "pic.h" -#include -#include "ethernet.h" -#include "nonstdio.h" -#include "usrp2_eth_packet.h" -#include "memcpy_wa.h" -#include -#include - - -// ---------------------------------------------------------------- - -static eth_mac_addr_t dst_mac_addr = - {{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }}; - - -// ---------------------------------------------------------------- - -#define PACKET_SIZE 1500 // bytes -#define ETH_DATA_RATE 1000000 // 1MB/s -#define ETH_PACKET_RATE (ETH_DATA_RATE/PACKET_SIZE) // 13,3333 pkts/s - -#define TIMER_RATE 100000000 // 100 MHz clock - -static int timer_delta = TIMER_RATE/ETH_PACKET_RATE; // ticks between interrupts - -static volatile bool send_packet_now = false; // timer handler sets this -static volatile bool link_is_up = false; // eth handler sets this - -int packet_number = 0; - -// ---------------------------------------------------------------- - -// debugging output on tx pins -#define LS_MASK 0xE0000 -#define LS_1000 0x80000 -#define LS_100 0x40000 -#define LS_10 0x20000 - - -/* - * Called when eth phy state changes (w/ interrupts disabled) - */ -void -link_changed_callback(int speed) -{ - int v = 0; - switch(speed){ - case 10: - v = LS_10; - link_is_up = true; - break; - - case 100: - v = LS_100; - link_is_up = true; - break; - - case 1000: - v = LS_100; - link_is_up = true; - break; - - default: - v = 0; - link_is_up = false; - break; - } - - //hal_gpio_set_tx(v, LS_MASK); /* set debug bits on d'board */ - - putstr("\neth link changed: speed = "); - puthex16_nl(speed); -} - -void -timer_irq_handler(unsigned irq) -{ - hal_set_timeout(timer_delta); // schedule next timeout - send_packet_now = 1; -} - - -void -buffer_irq_handler(unsigned irq) -{ - // FIXME -} - -static void -init_packet(int *buf, const u2_eth_packet_t *pkt, int bufnum) -{ - int i = 0; - int mark = ((bufnum & 0xff) << 24) | 0x005A0000; - - for (i = 0; i < BP_NLINES; i++){ - buf[i] = mark | i; - mark ^= 0x00FF0000; - } - - // copy header into buffer - memcpy_wa(buf, pkt, sizeof(*pkt)); -} - -static void -init_packets(void) -{ - int i; - - u2_eth_packet_t pkt __attribute__((aligned (4))); - - pkt.ehdr.dst = dst_mac_addr; - pkt.ehdr.src = *ethernet_mac_addr(); - pkt.ehdr.ethertype = U2_ETHERTYPE; - - // fill ALL buffers for debugging - for (i = 0; i < 8; i++) - init_packet((void *)buffer_ram(i), &pkt, i); -} - -int -main(void) -{ - u2_init(); - - int prev_leds = -1; - int new_leds = 0x00; - output_regs->leds = 0x00; - - int peak_hold_count = 0; - - // setup tx gpio bits for GPIOM_FPGA_1 -- fpga debug output - //hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - //hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); - - putstr("\nrcv_eth_packets\n"); - - init_packets(); - - // pic_register_handler(IRQ_BUFFER, buffer_irq_handler); // poll for now - - // FIXME turn off timer since I don't think MTS and MFS instructions are implemented - // pic_register_handler(IRQ_TIMER, timer_irq_handler); - // hal_set_timeout(timer_delta); - - ethernet_register_link_changed_callback(link_changed_callback); - - ethernet_init(); - - //eth_mac->speed = 4; // FIXME hardcode mac speed to 1000 - - // kick off a receive - bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); - - while(1){ - // u2_eth_packet_t pkt; - - new_leds = 0; - if (link_is_up) - new_leds = 0x2; - - if ((buffer_pool_status->status & (BPS_DONE_2|BPS_ERROR_2)) != 0){ - // we've got a packet! - -#if 0 - // copy to stack buffer so we can byte address it - memcpy_wa(&pkt, (void *)buffer_ram(2), sizeof(pkt)); - - putstr("Rx: src: "); - print_mac_addr(pkt.ehdr.dst_addr); - putstr(" dst: "); - print_mac_addr(pkt.ehdr.src_addr); - putstr(" ethtype: "); - puthex16(pkt.ehdr.ethertype); - putstr(" len: "); - int len = (buffer_pool_status->last_line[2] + 1) * 4; - puthex16_nl(len); -#else - volatile int *bp = buffer_ram(2); - int i; - for (i = 0; i < 16; i++){ - puthex8(i); - putchar(':'); - puthex32_nl(bp[i]); - } -#endif - - // kick off next receive - bp_clear_buf(2); - bp_receive_to_buf(2, PORT_ETH, 1, 0, 511); - - peak_hold_count = 2048 * 10; - } - - if (peak_hold_count > 0){ - peak_hold_count--; - new_leds |= 0x1; - } - - if (new_leds != prev_leds){ - prev_leds = new_leds; - output_regs->leds = new_leds; - } - } - - hal_finish(); - return 1; -} -- cgit v1.2.3