From 4240d5a2a1b705fe8ed5c3a1d1deef24be00d444 Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Fri, 30 Jul 2010 12:43:41 -0700 Subject: usrp2: reorganized firmware directory --- firmware/microblaze/usrp2/ethernet.c | 389 +++++++++++++++++++++++++++++++++++ 1 file changed, 389 insertions(+) create mode 100644 firmware/microblaze/usrp2/ethernet.c (limited to 'firmware/microblaze/usrp2/ethernet.c') diff --git a/firmware/microblaze/usrp2/ethernet.c b/firmware/microblaze/usrp2/ethernet.c new file mode 100644 index 000000000..d60d7dc4c --- /dev/null +++ b/firmware/microblaze/usrp2/ethernet.c @@ -0,0 +1,389 @@ +/* + * Copyright 2007 Free Software Foundation, Inc. + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "ethernet.h" +#include "memory_map.h" +#include "eth_phy.h" +#include "eth_mac.h" +#include "eth_mac_regs.h" +#include "pic.h" +#include "hal_io.h" +#include "nonstdio.h" +#include +#include "i2c.h" +#include "usrp2/fw_common.h" + +#define VERBOSE 1 + +static ethernet_t ed_state; +static ethernet_link_changed_callback_t ed_callback = 0; + +void +ethernet_register_link_changed_callback(ethernet_link_changed_callback_t new_callback) +{ + ed_callback = new_callback; +} + + +static void +ed_set_mac_speed(int speed) +{ + printf("Speed set to %d\n",speed); + /* + switch(speed){ + case 10: + eth_mac->speed = 1; + break; + case 100: + eth_mac->speed = 2; + break; + case 1000: + eth_mac->speed = 4; + break; + default: + break; + } + */ +} + +static void +ed_link_up(int speed) +{ + // putstr("ed_link_up: "); puthex16_nl(speed); + + ed_set_mac_speed(speed); + + if (ed_callback) // fire link changed callback + (*ed_callback)(speed); +} + +static void +ed_link_down(void) +{ + // putstr("ed_link_down\n"); + + if (ed_callback) // fire link changed callback + (*ed_callback)(0); +} + + +static void +ed_link_speed_change(int speed) +{ + ed_link_down(); + ed_link_up(speed); +} + +static void +print_flow_control(int flow_control) +{ + static const char *flow_control_msg[4] = { + "NONE", "WE_TX", "WE_RX", "SYMMETRIC" + }; + putstr("ethernet flow control: "); + puts(flow_control_msg[flow_control & 0x3]); +} + +static void +check_flow_control_resolution(void) +{ + static const unsigned char table[16] = { + // index = {local_asm, local_pause, partner_asm, partner_pause} + FC_NONE, FC_NONE, FC_NONE, FC_NONE, + FC_NONE, FC_SYMM, FC_NONE, FC_SYMM, + FC_NONE, FC_NONE, FC_NONE, FC_WE_TX, + FC_NONE, FC_SYMM, FC_WE_RX, FC_SYMM + }; + + int us = eth_mac_miim_read(PHY_AUTONEG_ADV); + int lp = eth_mac_miim_read(PHY_LP_ABILITY); + int index = (((us >> 10) & 0x3) << 2) | ((lp >> 10) & 0x3); + ed_state.flow_control = table[index]; + + if (1) + print_flow_control(ed_state.flow_control); +} + +/* + * Read the PHY state register to determine link state and speed + */ +static void +ed_check_phy_state(void) +{ + int lansr = eth_mac_miim_read(PHY_LINK_AN); + eth_link_state_t new_state = LS_UNKNOWN; + int new_speed = S_UNKNOWN; + + if (VERBOSE){ + putstr("LANSR: "); + puthex16_nl(lansr); + } + + if (lansr & LANSR_LINK_GOOD){ // link's up + if (VERBOSE) + puts(" LINK_GOOD"); + + new_state = LS_UP; + switch (lansr & LANSR_SPEED_MASK){ + case LANSR_SPEED_10: + new_speed = 10; + break; + + case LANSR_SPEED_100: + new_speed = 100; + break; + + case LANSR_SPEED_1000: + new_speed = 1000; + break; + + default: + new_speed = S_UNKNOWN; + break; + } + + check_flow_control_resolution(); + } + else { // link's down + if (VERBOSE) + puts(" NOT LINK_GOOD"); + + new_state = LS_DOWN; + new_speed = S_UNKNOWN; + } + + if (new_state != ed_state.link_state){ + ed_state.link_state = new_state; // remember new state + if (new_state == LS_UP) + ed_link_up(new_speed); + else if (new_state == LS_DOWN) + ed_link_down(); + } + else if (new_state == LS_UP && new_speed != ed_state.link_speed){ + ed_state.link_speed = new_speed; // remember new speed + ed_link_speed_change(new_speed); + } +} + +/* + * This is fired when the ethernet PHY state changes + */ +static void +eth_phy_irq_handler(unsigned irq) +{ + ed_check_phy_state(); + eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all ints +} + +void +ethernet_init(void) +{ + eth_mac_init(ethernet_mac_addr()); + + ed_state.link_state = LS_UNKNOWN; + ed_state.link_speed = S_UNKNOWN; + + // initialize MAC registers + // eth_mac->tx_hwmark = 0x1e; + //eth_mac->tx_lwmark = 0x19; + + //eth_mac->crc_chk_en = 1; + //eth_mac->rx_max_length = 2048; + + // configure PAUSE frame stuff + //eth_mac->tx_pause_en = 1; // pay attn to pause frames sent to us + + //eth_mac->pause_quanta_set = 38; // a bit more than 1 max frame 16kb/512 + fudge + //eth_mac->pause_frame_send_en = 1; // enable sending pause frames + + + // setup PHY to interrupt on changes + + unsigned mask = + (PHY_INT_AN_CMPL // auto-neg completed + | PHY_INT_NO_LINK // no link after auto-neg + | PHY_INT_NO_HCD // no highest common denominator + | PHY_INT_MAS_SLA_ERR // couldn't resolve master/slave + | PHY_INT_PRL_DET_FLT // parallel detection fault + | PHY_INT_LNK_CNG // link established or broken + | PHY_INT_SPD_CNG // speed changed + ); + + eth_mac_miim_write(PHY_INT_CLEAR, ~0); // clear all pending interrupts + eth_mac_miim_write(PHY_INT_MASK, mask); // enable the ones we want + + pic_register_handler(IRQ_PHY, eth_phy_irq_handler); + + // Advertise our flow control configuation. + // + // We and the link partner each specify two bits in the base page + // related to autoconfiguration: NWAY_AR_PAUSE and NWAY_AR_ASM_DIR. + // The bits say what a device is "willing" to do, not what may actually + // happen as a result of the negotiation. There are 4 cases: + // + // PAUSE ASM_DIR + // + // 0 0 I have no flow control capability. + // + // 1 0 I both assert and respond to flow control. + // + // 0 1 I assert flow control, but cannot respond. That is, + // I want to be able to send PAUSE frames, but will ignore any + // you send to me. (This is our configuration.) + // + // 1 1 I can both assert and respond to flow control AND I am willing + // to operate symmetrically OR asymmetrically in EITHER direction. + // (We hope the link partner advertises this, otherwise we don't + // get what we want.) + + int t = eth_mac_miim_read(PHY_AUTONEG_ADV); + t &= ~(NWAY_AR_PAUSE | NWAY_AR_ASM_DIR); + t |= NWAY_AR_ASM_DIR; + + // Say we can't to 10BASE-T or 100BASE-TX, half or full duplex + t &= ~(NWAY_AR_10T_HD_CAPS | NWAY_AR_10T_FD_CAPS | NWAY_AR_100TX_HD_CAPS | NWAY_AR_100TX_FD_CAPS); + + eth_mac_miim_write(PHY_AUTONEG_ADV, t); + int r = eth_mac_miim_read(PHY_AUTONEG_ADV); // DEBUG, read back + if (t != r){ + printf("PHY_AUTONEG_ADV: wrote 0x%x, got 0x%x\n", t, r); + } + + // Restart autonegotation. + // We want to ensure that we're advertising our PAUSE capabilities. + t = eth_mac_miim_read(PHY_CTRL); + eth_mac_miim_write(PHY_CTRL, t | MII_CR_RESTART_AUTO_NEG); +} + +static bool +unprogrammed(const void *t, size_t len) +{ + int i; + uint8_t *p = (uint8_t *)t; + bool all_zeros = true; + bool all_ones = true; + for (i = 0; i < len; i++){ + all_zeros &= p[i] == 0x00; + all_ones &= p[i] == 0xff; + } + return all_ones | all_zeros; +} + +//////////////////// MAC Addr Stuff /////////////////////// + +static int8_t src_mac_addr_initialized = false; +static eth_mac_addr_t src_mac_addr = {{ + 0x00, 0x50, 0xC2, 0x85, 0x3f, 0xff + }}; + +const eth_mac_addr_t * +ethernet_mac_addr(void) +{ + if (!src_mac_addr_initialized){ // fetch from eeprom + src_mac_addr_initialized = true; + + // if we're simulating, don't read the EEPROM model, it's REALLY slow + if (hwconfig_simulation_p()) + return &src_mac_addr; + + eth_mac_addr_t tmp; + bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, &tmp, sizeof(tmp)); + if (!ok || unprogrammed(&tmp, sizeof(tmp))){ + // use the default + } + else + src_mac_addr = tmp; + } + + return &src_mac_addr; +} + +bool +ethernet_set_mac_addr(const eth_mac_addr_t *t) +{ + bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_MAC_ADDR, t, sizeof(eth_mac_addr_t)); + if (ok){ + src_mac_addr = *t; + src_mac_addr_initialized = true; + //eth_mac_set_addr(t); //this breaks the link + } + + return ok; +} + +//////////////////// IP Addr Stuff /////////////////////// + +static int8_t src_ip_addr_initialized = false; +static struct ip_addr src_ip_addr = { + (192 << 24 | 168 << 16 | 10 << 8 | 2 << 0) +}; + + +const struct ip_addr *get_ip_addr(void) +{ + if (!src_ip_addr_initialized){ // fetch from eeprom + src_ip_addr_initialized = true; + + // if we're simulating, don't read the EEPROM model, it's REALLY slow + if (hwconfig_simulation_p()) + return &src_ip_addr; + + struct ip_addr tmp; + bool ok = eeprom_read(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, &tmp, sizeof(tmp)); + if (!ok || unprogrammed(&tmp, sizeof(tmp))){ + // use the default + } + else + src_ip_addr = tmp; + } + + return &src_ip_addr; +} + +bool set_ip_addr(const struct ip_addr *t){ + bool ok = eeprom_write(USRP2_I2C_ADDR_MBOARD, USRP2_EE_MBOARD_IP_ADDR, t, sizeof(struct ip_addr)); + if (ok){ + src_ip_addr = *t; + src_ip_addr_initialized = true; + } + + return ok; +} + +int +ethernet_check_errors(void) +{ + // these registers are reset when read + + int r = 0; + /* + if (eth_mac_read_rmon(0x05) != 0) + r |= RME_RX_CRC; + if (eth_mac_read_rmon(0x06) != 0) + r |= RME_RX_FIFO_FULL; + if (eth_mac_read_rmon(0x07) != 0) + r |= RME_RX_2SHORT_2LONG; + + if (eth_mac_read_rmon(0x25) != 0) + r |= RME_TX_JAM_DROP; + if (eth_mac_read_rmon(0x26) != 0) + r |= RME_TX_FIFO_UNDER; + if (eth_mac_read_rmon(0x27) != 0) + r |= RME_TX_FIFO_OVER; + */ + return r; +} -- cgit v1.2.3