From de2e7bb9acc556378e52c8bb6801cf3621a0ed72 Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Wed, 24 Mar 2010 18:03:03 -0700 Subject: added easy way to compile firmware for debug mode --- firmware/microblaze/apps/txrx.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) (limited to 'firmware/microblaze/apps') diff --git a/firmware/microblaze/apps/txrx.c b/firmware/microblaze/apps/txrx.c index b82c7702b..5eec99c4f 100644 --- a/firmware/microblaze/apps/txrx.c +++ b/firmware/microblaze/apps/txrx.c @@ -22,6 +22,8 @@ #include "config.h" #endif +#define DEBUG_MODE 0 //0 for normal operation + #include #include #include "u2_init.h" @@ -275,7 +277,7 @@ void handle_udp_ctrl_packet( * GPIO ******************************************************************/ case USRP2_CTRL_ID_USE_THESE_GPIO_DDR_SETTINGS_BRO: - hal_gpio_set_ddr( + if (!DEBUG_MODE) hal_gpio_set_ddr( OTW_GPIO_BANK_TO_NUM(ctrl_data_in->data.gpio_config.bank), ctrl_data_in->data.gpio_config.value, ctrl_data_in->data.gpio_config.mask @@ -284,7 +286,7 @@ void handle_udp_ctrl_packet( break; case USRP2_CTRL_ID_SET_YOUR_GPIO_PIN_OUTS_BRO: - hal_gpio_write( + if (!DEBUG_MODE) hal_gpio_write( OTW_GPIO_BANK_TO_NUM(ctrl_data_in->data.gpio_config.bank), ctrl_data_in->data.gpio_config.value, ctrl_data_in->data.gpio_config.mask @@ -302,7 +304,7 @@ void handle_udp_ctrl_packet( case USRP2_CTRL_ID_USE_THESE_ATR_SETTINGS_BRO:{ //setup the atr registers for this bank int bank = OTW_GPIO_BANK_TO_NUM(ctrl_data_in->data.atr_config.bank); - set_atr_regs( + if (!DEBUG_MODE) set_atr_regs( bank, ctrl_data_in->data.atr_config.rx_value, ctrl_data_in->data.atr_config.tx_value @@ -312,7 +314,7 @@ void handle_udp_ctrl_packet( int mask = ctrl_data_in->data.atr_config.mask; for (int i = 0; i < 16; i++){ // set to either GPIO_SEL_SW or GPIO_SEL_ATR - hal_gpio_set_sel(bank, i, (mask & (1 << i)) ? 'a' : 's'); + if (!DEBUG_MODE) hal_gpio_set_sel(bank, i, (mask & (1 << i)) ? 'a' : 's'); } ctrl_data_out.id = USRP2_CTRL_ID_GOT_THE_ATR_SETTINGS_DUDE; } @@ -757,9 +759,9 @@ main(void) #endif output_regs->debug_mux_ctrl = 1; -#if 0 - hal_gpio_set_sels(GPIO_TX_BANK, "1111111111111111"); - hal_gpio_set_sels(GPIO_RX_BANK, "1111111111111111"); +#if DEBUG_MODE + hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); + hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); #endif -- cgit v1.2.3