From c79595e6cc0044d09432aab19b26c3ac4d256595 Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Wed, 28 Apr 2010 17:23:55 -0700 Subject: removed some unused things like gpio from microblaze code --- firmware/microblaze/apps/txrx_uhd.c | 25 ------------------------- 1 file changed, 25 deletions(-) (limited to 'firmware/microblaze/apps/txrx_uhd.c') diff --git a/firmware/microblaze/apps/txrx_uhd.c b/firmware/microblaze/apps/txrx_uhd.c index d5b400e0c..db830fa51 100644 --- a/firmware/microblaze/apps/txrx_uhd.c +++ b/firmware/microblaze/apps/txrx_uhd.c @@ -22,8 +22,6 @@ #include "config.h" #endif -#define DEBUG_MODE 0 //0 for normal operation - #include #include #include "u2_init.h" @@ -49,8 +47,6 @@ #include #include -#define LEDS_SW LED_A - /* * Full duplex Tx and Rx between ethernet and DSP pipelines * @@ -481,27 +477,6 @@ main(void) register_udp_listener(USRP2_UDP_CTRL_PORT, handle_udp_ctrl_packet); register_udp_listener(USRP2_UDP_DATA_PORT, handle_udp_data_packet); - hal_set_led_src(0, LEDS_SW); - -#if 0 - // make bit 15 of Tx gpio's be a s/w output - hal_gpio_set_sel(GPIO_TX_BANK, 15, 's'); - hal_gpio_set_ddr(GPIO_TX_BANK, 0x8000, 0x8000); -#endif - -//set them all to the atr settings by default -hal_gpio_set_sels(GPIO_TX_BANK, "aaaaaaaaaaaaaaaa"); -hal_gpio_set_sels(GPIO_RX_BANK, "aaaaaaaaaaaaaaaa"); - - output_regs->debug_mux_ctrl = 1; -#if DEBUG_MODE - hal_gpio_set_sels(GPIO_TX_BANK, "0000000000000000"); - hal_gpio_set_sels(GPIO_RX_BANK, "0000000000000000"); - hal_gpio_set_ddr(GPIO_TX_BANK, 0xffff, 0xffff); - hal_gpio_set_ddr(GPIO_RX_BANK, 0xffff, 0xffff); -#endif - - // initialize double buffering state machine for ethernet -> DSP Tx dbsm_init(&dsp_tx_sm, DSP_TX_BUF_0, -- cgit v1.2.3