From ef5abde4f0c5ef5a16dc7b8ec7a8a5f611a9418f Mon Sep 17 00:00:00 2001 From: Ashish Chaudhari Date: Fri, 1 Aug 2014 13:19:41 -0700 Subject: b200: AD9361 firmware bugfixes - Fix for BUG #485: B200: Channels Swap Between Runs # Added code to transition state machine out of FDD while reconfiguring active chains. # bb:0b9929 Mon Jun 16 14:56:26 2014 -0700 - Fix for BUG #500: B210: RX channels are not phase aligned # Set bit to invert RX if internal LNA is bypassed # bb:0a4565 Thu Jun 5 17:10:37 2014 -0700 --- firmware/fx3/ad9361/lib/ad9361_impl.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'firmware/fx3') diff --git a/firmware/fx3/ad9361/lib/ad9361_impl.c b/firmware/fx3/ad9361/lib/ad9361_impl.c index cefb5f647..42d38b0f9 100644 --- a/firmware/fx3/ad9361/lib/ad9361_impl.c +++ b/firmware/fx3/ad9361/lib/ad9361_impl.c @@ -1486,6 +1486,7 @@ void init_ad9361(void) { write_ad9361_reg(0x019, 0x00); // AuxDAC2 Word[9:2] write_ad9361_reg(0x01A, 0x00); // AuxDAC1 Config and Word[1:0] write_ad9361_reg(0x01B, 0x00); // AuxDAC2 Config and Word[1:0] + write_ad9361_reg(0x022, 0x4A); // Invert Bypassed LNA write_ad9361_reg(0x023, 0xFF); // AuxDAC Manaul/Auto Control write_ad9361_reg(0x026, 0x00); // AuxDAC Manual Select Bit/GPO Manual Select write_ad9361_reg(0x030, 0x00); // AuxDAC1 Rx Delay @@ -1729,9 +1730,27 @@ void set_active_chains(bool tx1, bool tx2, bool rx1, bool rx2) { if(rx1) { reg_rxfilt = reg_rxfilt | 0x40; } if(rx2) { reg_rxfilt = reg_rxfilt | 0x80; } + /* Check for FDD state */ + bool set_back_to_fdd = false; + uint8_t ensm_state = read_ad9361_reg(0x017) & 0x0F; + if (ensm_state == 0xA) // FDD + { + /* Put into ALERT state (via the FDD flush state). */ + write_ad9361_reg(0x014, 0x01); + set_back_to_fdd = true; + } + + /* Wait for FDD flush state to complete (if necessary) */ + while (ensm_state == 0xA || ensm_state == 0xB) + ensm_state = read_ad9361_reg(0x017) & 0x0F; + /* Turn on / off the chains. */ write_ad9361_reg(0x002, reg_txfilt); write_ad9361_reg(0x003, reg_rxfilt); + + /* Put back into FDD state if necessary */ + if (set_back_to_fdd) + write_ad9361_reg(0x014, 0x21); } /* Tune the RX or TX frequency. -- cgit v1.2.3