From 642f3fb5823f292ae29cc38c8897327dfbdc3c15 Mon Sep 17 00:00:00 2001
From: Ben Hilburn <ben.hilburn@ettus.com>
Date: Mon, 7 Apr 2014 14:58:25 -0700
Subject: b2xx: Pulling FX3 and AD9361 source code into master.

---
 firmware/fx3/b200/b200_i2c.c | 82 ++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 firmware/fx3/b200/b200_i2c.c

(limited to 'firmware/fx3/b200/b200_i2c.c')

diff --git a/firmware/fx3/b200/b200_i2c.c b/firmware/fx3/b200/b200_i2c.c
new file mode 100644
index 000000000..c6fa67c77
--- /dev/null
+++ b/firmware/fx3/b200/b200_i2c.c
@@ -0,0 +1,82 @@
+//
+// Copyright 2013-2014 Ettus Research LLC
+//
+
+#include "b200_i2c.h"
+
+#include "cyu3i2c.h"
+
+/* I2c initialization for EEPROM programming. */
+void CyFxI2cInit (uint16_t pageLen) {
+    CyU3PI2cConfig_t i2cConfig;
+
+    /* Initialize and configure the I2C master module. */
+    CyU3PI2cInit ();
+
+    /* Start the I2C master block. The bit rate is set at 100KHz.
+     * The data transfer is done via DMA. */
+    CyU3PMemSet ((uint8_t *)&i2cConfig, 0, sizeof(i2cConfig));
+    i2cConfig.bitRate    = CY_FX_USBI2C_I2C_BITRATE;
+    i2cConfig.busTimeout = 0xFFFFFFFF;
+    i2cConfig.dmaTimeout = 0xFFFF;
+    i2cConfig.isDma      = CyFalse;
+
+    CyU3PI2cSetConfig (&i2cConfig, NULL);
+    glI2cPageSize = pageLen;
+}
+
+/* I2C read / write for programmer application. */
+void CyFxUsbI2cTransfer (
+        uint16_t  byteAddress,
+        uint8_t   devAddr,
+        uint16_t  byteCount,
+        uint8_t  *buffer,
+        CyBool_t  isRead)
+{
+    CyU3PI2cPreamble_t preamble;
+    uint16_t pageCount = (byteCount / glI2cPageSize);
+    uint16_t resCount = glI2cPageSize;
+
+    if (byteCount == 0) {
+        return;
+    }
+
+    if ((byteCount % glI2cPageSize) != 0) {
+        pageCount ++;
+        resCount = byteCount % glI2cPageSize;
+    }
+
+    while (pageCount != 0) {
+        if (isRead) {
+            /* Update the preamble information. */
+            preamble.length    = 4;
+            preamble.buffer[0] = devAddr;
+            preamble.buffer[1] = (uint8_t)(byteAddress >> 8);
+            preamble.buffer[2] = (uint8_t)(byteAddress & 0xFF);
+            preamble.buffer[3] = (devAddr | 0x01);
+            preamble.ctrlMask  = 0x0004;
+
+            CyU3PI2cReceiveBytes (&preamble, buffer, (pageCount == 1) ? resCount : glI2cPageSize, 0);
+        } else {
+            /* Write. Update the preamble information. */
+            preamble.length    = 3;
+            preamble.buffer[0] = devAddr;
+            preamble.buffer[1] = (uint8_t)(byteAddress >> 8);
+            preamble.buffer[2] = (uint8_t)(byteAddress & 0xFF);
+            preamble.ctrlMask  = 0x0000;
+
+            CyU3PI2cTransmitBytes (&preamble, buffer, (pageCount == 1) ? resCount : glI2cPageSize, 0);
+            /* Wait for the write to complete. */
+            preamble.length = 1;
+            CyU3PI2cWaitForAck(&preamble, 200);
+        }
+
+        /* An additional delay seems to be required after receiving an ACK. */
+        CyU3PThreadSleep (1);
+
+        /* Update the parameters */
+        byteAddress  += glI2cPageSize;
+        buffer += glI2cPageSize;
+        pageCount --;
+    }
+}
-- 
cgit v1.2.3