From c473cc56fafcb47d6ba1f16e8c9fb89ff6c57bca Mon Sep 17 00:00:00 2001
From: Josh Blum <josh@joshknows.com>
Date: Fri, 5 Nov 2010 12:32:09 -0700
Subject: usrp1: pulled in cmake build system for usrp1 firmware

---
 firmware/fx2/common/fpga_regs_standard.h | 300 +++++++++++++++++++++++++++++++
 1 file changed, 300 insertions(+)
 create mode 100644 firmware/fx2/common/fpga_regs_standard.h

(limited to 'firmware/fx2/common/fpga_regs_standard.h')

diff --git a/firmware/fx2/common/fpga_regs_standard.h b/firmware/fx2/common/fpga_regs_standard.h
new file mode 100644
index 000000000..7485e2bab
--- /dev/null
+++ b/firmware/fx2/common/fpga_regs_standard.h
@@ -0,0 +1,300 @@
+/* -*- c++ -*- */
+/*
+ * Copyright 2003,2004,2006 Free Software Foundation, Inc.
+ * 
+ * This file is part of GNU Radio
+ * 
+ * GNU Radio is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3, or (at your option)
+ * any later version.
+ * 
+ * GNU Radio is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ * 
+ * You should have received a copy of the GNU General Public License
+ * along with GNU Radio; see the file COPYING.	If not, write to
+ * the Free Software Foundation, Inc., 51 Franklin Street,
+ * Boston, MA 02110-1301, USA.
+ */
+#ifndef INCLUDED_FPGA_REGS_STANDARD_H
+#define INCLUDED_FPGA_REGS_STANDARD_H
+
+// Register numbers 0 to 31 are reserved for use in fpga_regs_common.h.
+// Registers 64 to 79 are available for custom FPGA builds.
+
+
+// DDC / DUC
+
+#define	FR_INTERP_RATE		32	// [1,1024]
+#define	FR_DECIM_RATE		33	// [1,256]
+
+// DDC center freq
+
+#define FR_RX_FREQ_0		34
+#define FR_RX_FREQ_1		35
+#define FR_RX_FREQ_2		36
+#define FR_RX_FREQ_3		37
+
+// See below for DDC Starting Phase
+
+// ------------------------------------------------------------------------
+//  configure FPGA Rx mux
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------+-------+-------+-------+-------+-+-----+
+// |      must be zero     | Q3| I3| Q2| I2| Q1| I1| Q0| I0|Z| NCH |
+// +-----------------------+-------+-------+-------+-------+-+-----+
+//
+// There are a maximum of 4 digital downconverters in the the FPGA.
+// Each DDC has two 16-bit inputs, I and Q, and two 16-bit outputs, I & Q.
+//
+// DDC I inputs are specified by the two bit fields I3, I2, I1 & I0
+//
+//   0 = DDC input is from ADC 0
+//   1 = DDC input is from ADC 1
+//   2 = DDC input is from ADC 2
+//   3 = DDC input is from ADC 3
+//
+// If Z == 1, all DDC Q inputs are set to zero
+// If Z == 0, DDC Q inputs are specified by the two bit fields Q3, Q2, Q1 & Q0
+//
+// NCH specifies the number of complex channels that are sent across
+// the USB.  The legal values are 1, 2 or 4, corresponding to 2, 4 or
+// 8 16-bit values.
+
+#define	FR_RX_MUX		38
+
+// ------------------------------------------------------------------------
+//  configure FPGA Tx Mux.
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------+-------+-------+-------+-------+-+-----+
+// |                       | DAC3  | DAC2  | DAC1  |  DAC0 |0| NCH |
+// +-----------------------------------------------+-------+-+-----+
+//
+// NCH specifies the number of complex channels that are sent across
+// the USB.  The legal values are 1 or 2, corresponding to 2 or 4
+// 16-bit values.
+//
+// There are two interpolators with complex inputs and outputs.
+// There are four DACs.  (We use the DUC in each AD9862.)
+//
+// Each 4-bit DACx field specifies the source for the DAC and
+// whether or not that DAC is enabled.  Each subfield is coded
+// like this: 
+//
+//    3 2 1 0
+//   +-+-----+
+//   |E|  N  |
+//   +-+-----+
+//
+// Where E is set if the DAC is enabled, and N specifies which
+// interpolator output is connected to this DAC.
+//
+//  N   which interp output
+// ---  -------------------
+//  0   chan 0 I
+//  1   chan 0 Q
+//  2   chan 1 I
+//  3   chan 1 Q
+
+#define	FR_TX_MUX		39
+
+// ------------------------------------------------------------------------
+// REFCLK control
+//
+// Control whether a reference clock is sent to the daughterboards,
+// and what frequency.  The refclk is sent on d'board i/o pin 0.
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------------+-+------------+
+// |             Reserved (Must be zero)           |E|   DIVISOR  |
+// +-----------------------------------------------+-+------------+
+
+//
+// Bit 7  -- 1 turns on refclk, 0 allows IO use
+// Bits 6:0 Divider value
+
+#define FR_TX_A_REFCLK          40
+#define FR_RX_A_REFCLK          41
+#define FR_TX_B_REFCLK          42
+#define FR_RX_B_REFCLK          43
+
+#  define bmFR_REFCLK_EN	   0x80
+#  define bmFR_REFCLK_DIVISOR_MASK 0x7f
+
+// ------------------------------------------------------------------------
+// DDC Starting Phase
+
+#define FR_RX_PHASE_0		44
+#define FR_RX_PHASE_1		45
+#define FR_RX_PHASE_2		46
+#define FR_RX_PHASE_3		47
+
+// ------------------------------------------------------------------------
+// Tx data format control register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-------------------------------------------------------+-------+
+// |                    Reserved (Must be zero)            |  FMT  |
+// +-------------------------------------------------------+-------+
+//
+//  FMT values:
+
+#define FR_TX_FORMAT		48
+#  define bmFR_TX_FORMAT_16_IQ		0	// 16-bit I, 16-bit Q
+
+// ------------------------------------------------------------------------
+// Rx data format control register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------+-+-+---------+-------+
+// |          Reserved (Must be zero)        |B|Q|  WIDTH  | SHIFT |
+// +-----------------------------------------+-+-+---------+-------+
+//
+//  FMT values:
+
+#define FR_RX_FORMAT		49
+
+#  define bmFR_RX_FORMAT_SHIFT_MASK	(0x0f <<  0)	// arithmetic right shift [0, 15]
+#  define bmFR_RX_FORMAT_SHIFT_SHIFT	0
+#  define bmFR_RX_FORMAT_WIDTH_MASK	(0x1f <<  4)    // data width in bits [1, 16] (not all valid)
+#  define bmFR_RX_FORMAT_WIDTH_SHIFT    4
+#  define bmFR_RX_FORMAT_WANT_Q		(0x1  <<  9)    // deliver both I & Q, else just I
+#  define bmFR_RX_FORMAT_BYPASS_HB	(0x1  << 10)    // bypass half-band filter
+
+// The valid combinations currently are:
+//
+//   B  Q  WIDTH  SHIFT
+//   0  1    16     0
+//   0  1     8     8
+
+
+// Possible future values of WIDTH = {4, 2, 1}
+// 12 takes a bit more work, since we need to know packet alignment.
+
+// ------------------------------------------------------------------------
+// FIXME register numbers 50 to 63 are available
+
+// ------------------------------------------------------------------------
+// Registers 64 to 95 are reserved for user custom FPGA builds.
+// The standard USRP software will not touch these.
+
+#define FR_USER_0	64
+#define FR_USER_1	65
+#define FR_USER_2	66
+#define FR_USER_3	67
+#define FR_USER_4	68
+#define FR_USER_5	69
+#define FR_USER_6	70
+#define FR_USER_7	71
+#define FR_USER_8	72
+#define FR_USER_9	73
+#define FR_USER_10	74
+#define FR_USER_11	75
+#define FR_USER_12	76
+#define FR_USER_13	77
+#define FR_USER_14	78
+#define FR_USER_15	79
+#define FR_USER_16	80
+#define FR_USER_17	81
+#define FR_USER_18	82
+#define FR_USER_19	83
+#define FR_USER_20	84
+#define FR_USER_21	85
+#define FR_USER_22	86
+#define FR_USER_23	87
+#define FR_USER_24	88
+#define FR_USER_25	89
+#define FR_USER_26	90
+#define FR_USER_27	91
+#define FR_USER_28	92
+#define FR_USER_29	93
+#define FR_USER_30	94
+#define FR_USER_31	95
+
+//Registers needed for multi usrp master/slave configuration
+//
+//Rx Master/slave control register (FR_RX_MASTER_SLAVE = FR_USER_0)
+//
+#define FR_RX_MASTER_SLAVE		64
+#define bitnoFR_RX_SYNC			0
+#define bitnoFR_RX_SYNC_MASTER		1
+#define bitnoFR_RX_SYNC_SLAVE		2
+#  define bmFR_RX_SYNC          (1 <<bitnoFR_RX_SYNC) //1 If this is a master "sync now" and send sync to slave.
+                                                      //  If this is a slave "sync now" (testing purpose only)
+                                                      //  Sync is allmost the same as reset (clear all counters and buffers) 
+                                                      //  except that the io outputs and settings don't get reset (otherwise it couldn't send the sync to the slave)
+                                                      //0 Normal operation
+
+#  define bmFR_RX_SYNC_MASTER (1 <<bitnoFR_RX_SYNC_MASTER) //1 This is a rx sync master, output sync_rx on rx_a_io[15]
+                                                           //0 This is not a rx sync master
+#  define bmFR_RX_SYNC_SLAVE  (1 <<bitnoFR_RX_SYNC_SLAVE) //1 This is a rx sync slave, follow sync_rx on rx_a_io[bitnoFR_RX_SYNC_INPUT_IOPIN]
+                                                          //0 This is not an rx sync slave.
+
+//Caution The master settings will output values on the io lines.
+//They inheritely enable these lines as output. If you have a daughtercard which uses these lines also as output then you will burn your usrp and daughtercard.
+//If you set the slave bits then your usrp won't do anything if you don't connect a master.
+// Rx Master/slave control register
+//
+// The way this is supposed to be used is connecting a (short) 16pin flatcable from an rx daughterboard in RXA master io_rx[8..15] to slave io_rx[8..15] on RXA of slave usrp
+// This can be done with basic_rx boards or dbsrx boards
+//dbsrx: connect master-J25 to slave-J25
+//basic rx: connect J25 to slave-J25
+//CAUTION: pay attention to the lineup of your connector.
+//The red line (pin1) should be at the same side of the daughterboards on master and slave.
+//If you turnaround the cable on one end you will burn your usrp.
+
+//You cannot use a 16pin flatcable if you are using FLEX400 or FLEX2400 daughterboards, since these use a lot of the io pins.
+//You can still link them but you must use only a 2pin or 1pin cable
+//You can also use a 2-wire link. put a 2pin header on io[15],gnd of the master RXA daughterboard and connect it to io15,gnd of the slave RXA db.
+//You can use a cable like the ones found with the leds on the mainbord of a PC.
+//Make sure you don't twist the cable, otherwise you connect the sync output to ground.
+//To be save you could also just use a single wire from master io[15] to slave io[15], but this is not optimal for signal integrity.
+
+
+// Since rx_io[0] can normally be used as a refclk and is not exported on all daughterboards this line
+// still has the refclk function if you use the master/slave setup (it is not touched by the master/slave settings).
+// The master/slave circuitry will only use io pin 15 and does not touch any of the other io pins.
+#define bitnoFR_RX_SYNC_INPUT_IOPIN		15
+#define bmFR_RX_SYNC_INPUT_IOPIN		(1<<bitnoFR_RX_SYNC_INPUT_IOPIN)
+//TODO the output pin is still hardcoded in the verilog code, make it listen to the following define
+#define bitnoFR_RX_SYNC_OUTPUT_IOPIN	15
+#define bmFR_RX_SYNC_OUTPUT_IOPIN	(1<<bitnoFR_RX_SYNC_OUTPUT_IOPIN)
+// =======================================================================
+// READBACK Registers
+// =======================================================================
+
+#define FR_RB_IO_RX_A_IO_TX_A	1	// read back a-side i/o pins
+#define	FR_RB_IO_RX_B_IO_TX_B	2	// read back b-side i/o pins
+
+// ------------------------------------------------------------------------
+// FPGA Capability register
+//
+//    3                   2                   1                       
+//  1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
+// +-----------------------------------------------+-+-----+-+-----+
+// |                    Reserved (Must be zero)    |T|NDUC |R|NDDC |
+// +-----------------------------------------------+-+-----+-+-----+
+//
+// Bottom 4-bits are Rx capabilities
+// Next   4-bits are Tx capabilities
+
+#define	FR_RB_CAPS	3
+#  define bmFR_RB_CAPS_NDDC_MASK	(0x7 << 0)   // # of digital down converters 0,1,2,4
+#  define bmFR_RB_CAPS_NDDC_SHIFT	0
+#  define bmFR_RB_CAPS_RX_HAS_HALFBAND	(0x1 << 3)
+#  define bmFR_RB_CAPS_NDUC_MASK        (0x7 << 4)   // # of digital up converters 0,1,2
+#  define bmFR_RB_CAPS_NDUC_SHIFT	4
+#  define bmFR_RB_CAPS_TX_HAS_HALFBAND	(0x1 << 7)
+
+
+#endif /* INCLUDED_FPGA_REGS_STANDARD_H */
-- 
cgit v1.2.3