From ff796f519df11111f028a505125ce95f060c897e Mon Sep 17 00:00:00 2001 From: Josh Blum Date: Mon, 24 Jan 2011 10:29:40 -0800 Subject: uhd: added docs on usrp2/n, removed empty n2xx doc page, misc --- host/CMakeLists.txt | 3 --- host/docs/CMakeLists.txt | 1 - host/docs/build.rst | 13 ++++++++++--- host/docs/usrp2.rst | 17 ++++++++++++----- host/docs/usrp_nxxx.rst | 5 ----- host/lib/usrp/usrp1/soft_time_ctrl.cpp | 2 -- 6 files changed, 22 insertions(+), 19 deletions(-) delete mode 100644 host/docs/usrp_nxxx.rst diff --git a/host/CMakeLists.txt b/host/CMakeLists.txt index d0c576ee5..e64c1031f 100644 --- a/host/CMakeLists.txt +++ b/host/CMakeLists.txt @@ -65,8 +65,6 @@ ENDIF(NOT CMAKE_BUILD_TYPE) IF(CMAKE_COMPILER_IS_GNUCXX) ADD_DEFINITIONS(-Wall) ADD_DEFINITIONS(-Wextra) - #causes trouble when compiling libusb1.0 on macintosh - #comment out until mac ports libusb gets its act together #ADD_DEFINITIONS(-pedantic) #ADD_DEFINITIONS(-ansi) #only export symbols that are declared to be part of the uhd api: @@ -79,7 +77,6 @@ IF(MSVC) ADD_DEFINITIONS(-DNOMINMAX) #disables stupidity and enables std::min and std::max ADD_DEFINITIONS(-D_SCL_SECURE_NO_WARNINGS) #avoid warnings from boost::split ADD_DEFINITIONS(-DBOOST_ALL_DYN_LINK) #setup boost auto-linking in msvc - ADD_DEFINITIONS(/arch:SSE2 /G7) #processor optimization flags ENDIF(MSVC) ######################################################################## diff --git a/host/docs/CMakeLists.txt b/host/docs/CMakeLists.txt index ace48f008..0c2cadfc2 100644 --- a/host/docs/CMakeLists.txt +++ b/host/docs/CMakeLists.txt @@ -29,7 +29,6 @@ SET(manual_sources transport.rst usrp1.rst usrp2.rst - usrp_nxxx.rst ) ######################################################################## diff --git a/host/docs/build.rst b/host/docs/build.rst index 74ebc9ee4..de7c544f2 100644 --- a/host/docs/build.rst +++ b/host/docs/build.rst @@ -30,10 +30,13 @@ On windows, install cygwin with git support to checkout the repository, or install msysgit from http://code.google.com/p/msysgit/downloads/list ^^^^^^^^^^^^^^^^ -C++ +C++ compiler ^^^^^^^^^^^^^^^^ -On Unix, this is GCC 4.0 and above. On Windows, this is MSVC 2008. -Other compilers have not been tested yet or confirmed working. +The following compilers are known to work: + +* GCC +* Clang +* MSVC ^^^^^^^^^^^^^^^^ CMake @@ -78,6 +81,10 @@ Cheetah * **Download URL:** http://www.cheetahtemplate.org/download.html * **Download URL (windows installer):** http://feisley.com/python/cheetah/ +**Alternative method:** +Install setuptools, and use the easy_install command to install Cheetah. +http://pypi.python.org/pypi/setuptools + ^^^^^^^^^^^^^^^^ Doxygen ^^^^^^^^^^^^^^^^ diff --git a/host/docs/usrp2.rst b/host/docs/usrp2.rst index 3031a0075..2ee49646f 100644 --- a/host/docs/usrp2.rst +++ b/host/docs/usrp2.rst @@ -50,6 +50,8 @@ Load the images onto the on-board flash (USRP-N Series only) ------------------------------------------------------------------------ The USRP-N Series can be reprogrammed over the network to update or change the firmware and FPGA images. +When updating images, always burn both the FPGA and firmware images before power cycling. +This ensures that when the device reboots, it has a compatible set of images to boot into. ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Use the net burner tool (unix) @@ -75,8 +77,11 @@ Its possible to put the device into an unusable state by loading bad images. Fortunately, the USRP-N Series can be booted into a safe (read-only) image. Once booted into the safe image, the user can once again load images onto the device. -To boot into the safe image, hold down the reset button while power-cycling the device. -The reset button is a pushbutton switch (S2) located inside the enclosure. +The safe-mode button is a pushbutton switch (S2) located inside the enclosure. +To boot into the safe image, hold-down the safe-mode button while power-cycling the device. +Continue to hold-down the button until the front-panel LEDs blink and remain solid. + +When in safe-mode, the USRP-N Series will always have the IP address 192.168.10.2 ------------------------------------------------------------------------ Setup networking @@ -163,13 +168,15 @@ The USRP2 will reply to icmp echo requests. ping 192.168.10.2 -**Monitor the USRP2:** -You can read the serial port on the rear of the USRP2 -to get debug verbose from the embedded microcontroller. +**Monitor the serial output:** +Read the serial port to get debug verbose from the embedded microcontroller. Use a standard USB to 3.3v-level serial converter at 230400 baud. The microcontroller prints useful information about IP addresses, MAC addresses, control packets, and fast-path settings. +* **USRP2:** Serial port located on the rear edge +* **N210:** Serial port located on the left side + **Monitor the host network traffic:** Use wireshark to monitor packets sent to and received from the USRP2. diff --git a/host/docs/usrp_nxxx.rst b/host/docs/usrp_nxxx.rst deleted file mode 100644 index 733078915..000000000 --- a/host/docs/usrp_nxxx.rst +++ /dev/null @@ -1,5 +0,0 @@ -======================================================================== -UHD - USRP-N Series Application Notes -======================================================================== - -* `USRP2 and N Series Application Notes <./usrp2.html>`_ diff --git a/host/lib/usrp/usrp1/soft_time_ctrl.cpp b/host/lib/usrp/usrp1/soft_time_ctrl.cpp index 4d6abe218..856faf89d 100644 --- a/host/lib/usrp/usrp1/soft_time_ctrl.cpp +++ b/host/lib/usrp/usrp1/soft_time_ctrl.cpp @@ -20,14 +20,12 @@ #include #include #include -#include #include using namespace uhd; using namespace uhd::usrp; using namespace uhd::transport; namespace pt = boost::posix_time; -namespace lt = boost::local_time; static const time_spec_t TWIDDLE(0.0015); -- cgit v1.2.3