From e80c879f22689b1bd97614a5469d7b164aa4d28f Mon Sep 17 00:00:00 2001 From: natetemple Date: Tue, 29 May 2018 15:32:49 -0700 Subject: Docs: Update serial path command --- host/docs/usrp_n3xx.dox | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/host/docs/usrp_n3xx.dox b/host/docs/usrp_n3xx.dox index ca8ae49bd..cee97ea5b 100644 --- a/host/docs/usrp_n3xx.dox +++ b/host/docs/usrp_n3xx.dox @@ -198,7 +198,7 @@ If you have multiple N3XX devices connect, you may have to try out multiple devices. In this case, to use this symlink instead of the raw device node address, modify the command above to: - $ sudo screen /dev/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_007F6CB5-if00-port0 115200 + $ sudo screen /dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_007F6CB5-if00-port0 115200 You should be presented with a shell prompt similar to the following: @@ -216,7 +216,7 @@ The STM32 microcontroller (which controls the power sequencing, among other things) also has a serial console available. To connect to the microcontroller, use the other UART device. In the example above: - $ sudo screen /dev/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_007F6CB5-if01-port0 115200 + $ sudo screen /dev/serial/by-id/usb-Silicon_Labs_CP2105_Dual_USB_to_UART_Bridge_Controller_007F6CB5-if01-port0 115200 It provides a very simple prompt. The command 'help' will list all available commands. A direct connection to the microcontroller can be used to hard-reset -- cgit v1.2.3