From 4b4576b06bd2c209d29c4fd2afd61e0485d91b0c Mon Sep 17 00:00:00 2001 From: Martin Braun Date: Wed, 19 Jul 2017 12:33:25 -0700 Subject: docs: Minor updated on GPS R&D testing procedure --- host/docs/rd_testing.dox | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/host/docs/rd_testing.dox b/host/docs/rd_testing.dox index a9105d2bb..2009d630a 100644 --- a/host/docs/rd_testing.dox +++ b/host/docs/rd_testing.dox @@ -45,10 +45,11 @@ following). `uhd_usrp_probe` and verify that the GPSDO is correctly reported. Power down the device before connecting the peripheral. The GPSDO must be reported found, and no error or warning must be printed. -3. Without connecting the GPS antenna input, run `query_gpsdo_sensors`. To pass, - it must report the GPSDO as found, lock to the external reference, but then - report not being locked to GPS. The tool will report a valid GPS time, and - a string such as "GPS and UHD Device time are aligned" in case of success. +3. OCXO only: Without connecting the GPS antenna input, run + `query_gpsdo_sensors`. To pass, it must report the GPSDO as found, lock to + the external reference, but then report not being locked to GPS. The tool + will report a valid GPS time, and a string such as "GPS and UHD Device time + are aligned" in case of success. 4. Connect a GPS antenna to the input and make sure it is in a position to receive GPS satellite data. Confirm that GPS lock is reported using `query_gpsdo_sensors` within 20 minutes of connecting the antenna. -- cgit v1.2.3