| Commit message (Expand) | Author | Age | Files | Lines |
... | |
* | B100/E100: fix ATR RX mode pins not connected | Nick Foster | 2011-08-10 | 2 | -4/+4 |
* | time: register time output to help fpga timing | Matt Ettus | 2011-07-28 | 1 | -2/+5 |
* | vrt: delay the late signal to help with timing | Matt Ettus | 2011-07-28 | 1 | -5/+20 |
* | dsp: allow tx iq balance to be removed at compile time | Matt Ettus | 2011-07-28 | 1 | -23/+38 |
* | dsp: option to remove iq compensation at compile time | Matt Ettus | 2011-07-28 | 1 | -35/+40 |
* | time64: reverted mimo sync changes to time64 | Josh Blum | 2011-07-28 | 1 | -3/+1 |
* | u2/u2p: speed up time_64, and remove readbacks on simple_gemac wb regs | Matt Ettus | 2011-07-28 | 2 | -11/+13 |
* | simple_gemac: remove old 19-bit wide wrapper | Matt Ettus | 2011-07-28 | 4 | -402/+0 |
* | usrp2: remove old unused readback mux value | Josh Blum | 2011-07-28 | 2 | -2/+2 |
* | usrp2: bump minor version number for changes | Josh Blum | 2011-07-28 | 2 | -2/+2 |
* | vita_rx_ctrl: use an extra cmd bit to signal stop | Josh Blum | 2011-07-28 | 1 | -7/+7 |
* | usrp2: fixed swapped tx/rx signals for nsgpio | Josh Blum | 2011-07-28 | 2 | -2/+2 |
* | simple_gemac: add parameter to allow disabling rx flow control at compile time | Matt Ettus | 2011-07-27 | 1 | -6/+10 |
* | u2/u2p: apply atr/gpio changes to u2p | Matt Ettus | 2011-07-27 | 2 | -14/+7 |
* | atr: forgot to delete this line | Matt Ettus | 2011-07-27 | 1 | -1/+0 |
* | u2: redo the atr gpio pins, remove some old cruft | Matt Ettus | 2011-07-27 | 2 | -52/+48 |
* | u2p: finish copying over serdes light fix | Matt Ettus | 2011-07-22 | 1 | -2/+1 |
* | u2/u2p: further qualify the serdes link light | Matt Ettus | 2011-07-21 | 3 | -7/+13 |
* | usrp2: split inspection logic into each relevant cycle | Josh Blum | 2011-07-19 | 1 | -11/+35 |
* | appease the ISE gods | Matt Ettus | 2011-07-19 | 5 | -2/+5 |
* | removed wb readback of ATR, allowing it to be synthesized as luts | Matt Ettus | 2011-07-19 | 2 | -4/+10 |
* | N200: detailed map report allows you to see what takes up too much space | Matt Ettus | 2011-07-19 | 4 | -0/+4 |
* | dsp: reduce bitwidth to help timing | Matt Ettus | 2011-07-19 | 1 | -4/+6 |
* | fpga: print timing report after generate bin file | Josh Blum | 2011-07-19 | 2 | -1/+34 |
* | dsp: reset the interpolator when the rate changes, to prevent oscillation | Matt Ettus | 2011-07-19 | 1 | -7/+8 |
* | b100: fix for fpga syntax error on xfer_rate | Josh Blum | 2011-07-19 | 1 | -1/+1 |
* | Merge branch 'b100_shrink' into new_work | Josh Blum | 2011-07-19 | 29 | -718/+967 |
|\ |
|
| * | usrp2: split compat number into major/minor (increment minor for fixes) | Josh Blum | 2011-07-03 | 2 | -2/+2 |
| * | e100: proc_int should be high when interrupted | Josh Blum | 2011-06-20 | 1 | -3/+1 |
| * | e100: added proc_int and buffer for async messages | Josh Blum | 2011-06-19 | 2 | -17/+49 |
| * | u1p: remove uart and bus testing to fit easier | Matt Ettus | 2011-06-16 | 1 | -8/+9 |
| * | u1p: remove unused ports | Matt Ettus | 2011-06-16 | 1 | -1/+0 |
| * | u1e: core compile now works as a fullchip lint | Matt Ettus | 2011-06-16 | 1 | -1/+1 |
| * | u1p/u1e: cleanup some warnings, connect the correct clocks | Matt Ettus | 2011-06-16 | 3 | -12/+11 |
| * | USRP2/N2x0: incremented compat numbers for frontend work | Josh Blum | 2011-06-15 | 2 | -2/+2 |
| * | Merge branch 'usrp_e100_aux_spi' into dsp_rebase | Matt Ettus | 2011-06-15 | 5 | -156/+24 |
| |\ |
|
| | * | usrp-e100: removed passthrough files, not needed w/ aux spi for clock chip | Josh Blum | 2011-06-09 | 3 | -139/+0 |
| | * | usrp-e100: make reg_test32 persistent across resets, bump compat number | Josh Blum | 2011-06-08 | 1 | -2/+3 |
| | * | usrp-e100: work on aux spi | Josh Blum | 2011-06-08 | 2 | -17/+22 |
| * | | u1e/u1p: new register map for new dsp | Matt Ettus | 2011-06-15 | 2 | -26/+32 |
| * | | u1p: work in dual rx and frontend from u1e | Matt Ettus | 2011-06-14 | 2 | -16/+61 |
| * | | u1p: new tx dsp frontend, copied from u1e | Matt Ettus | 2011-06-14 | 1 | -10/+17 |
| * | | u1e-dsp: attach tx dc offset and iq balance | Matt Ettus | 2011-06-14 | 2 | -10/+14 |
| * | | dsp: implement iqbal on tx | Matt Ettus | 2011-06-12 | 2 | -30/+35 |
| * | | dsp: remove unused setting reg | Matt Ettus | 2011-06-08 | 1 | -4/+0 |
| * | | dsp: added tx_frontend, instantiated in u2/u2p | Matt Ettus | 2011-06-08 | 6 | -25/+81 |
| * | | dsp: small_hb_dec now 24 bits wide as well | Matt Ettus | 2011-06-08 | 2 | -39/+38 |
| * | | dsp: do everything at 24 bits wide | Matt Ettus | 2011-06-08 | 5 | -120/+204 |
| * | | u1e: update u1e to use new rx_frontend, and give it a 2nd rx dsp core | Matt Ettus | 2011-06-08 | 1 | -21/+74 |
| * | | u2/u2p: use all 24 bits from the rx_frontend | Matt Ettus | 2011-06-08 | 2 | -2/+2 |