summaryrefslogtreecommitdiffstats
path: root/usrp2
Commit message (Collapse)AuthorAgeFilesLines
* E100: GPSDO serial port level conversionNick Foster2011-09-282-2/+9
|
* B100: use gpif_misc on R2 hw, invert direction of gpif_misc pinsNick Foster2011-09-191-2/+2
|
* u1e,u1p: turn off debug pins, misc cleanupsMatt Ettus2011-09-082-26/+10
|
* u1p: proper format in ucf fileMatt Ettus2011-09-085-4/+474
| | | | u1p: build separate u1plus (prototypes) and B100 (release)
* u1e: relax GPMC constraints, eases P&RMatt Ettus2011-09-021-10/+10
|
* u1e: separate build for E100 and E110, just a different FPGAMatt Ettus2011-09-012-1/+102
|
* e100: squashed work on bus implementation on GPMCJosh Blum2011-08-2922-984/+545
|
* fix warning on dat_o in atr_controller16.vJosh Blum2011-08-291-3/+2
|
* fpga: minor tweaks to build systemJosh Blum2011-08-262-2/+4
|
* fix typoMatt Ettus2011-08-261-21/+21
|
* all: tie unused ram inputs to 1 instead of zero, helps routingMatt Ettus2011-08-262-22/+22
|
* b100: gpif_rst resynced to gpif_clkMatt Ettus2011-08-261-1/+1
|
* dsp: slow down the time constant of the DC offset correction by a factor of ↵Matt Ettus2011-08-261-1/+1
| | | | 16. it may need to be even slower.
* usrp2: reconnect frontend calibration, timing meetsJosh Blum2011-08-265-6/+6
|
* e100: continuation of the atr fix to get e100 to buildJosh Blum2011-08-151-2/+2
|
* usrp2: bump FPGA minor number to 2 for patch releaseJosh Blum2011-08-152-2/+2
|
* connect unused BRAM inputs to 1s to save routing logicJosh Blum2011-08-151-1/+1
|
* dsp: clear cic_decim when not enabledMatt Ettus2011-08-151-4/+4
|
* N2x0: print constraints summary from makefileJosh Blum2011-08-151-0/+1
|
* N2x0: added a Makefile to build all N2x0 projects (make -j4)Josh Blum2011-08-151-0/+22
|
* N2x0: delay ADC A inversion so A and B are latched in the sameJosh Blum2011-08-151-3/+5
|
* B100/E100: fix ATR RX mode pins not connectedNick Foster2011-08-102-4/+4
|
* time: register time output to help fpga timingMatt Ettus2011-07-281-2/+5
|
* vrt: delay the late signal to help with timingMatt Ettus2011-07-281-5/+20
|
* dsp: allow tx iq balance to be removed at compile timeMatt Ettus2011-07-281-23/+38
|
* dsp: option to remove iq compensation at compile timeMatt Ettus2011-07-281-35/+40
|
* time64: reverted mimo sync changes to time64Josh Blum2011-07-281-3/+1
|
* u2/u2p: speed up time_64, and remove readbacks on simple_gemac wb regsMatt Ettus2011-07-282-11/+13
|
* simple_gemac: remove old 19-bit wide wrapperMatt Ettus2011-07-284-402/+0
|
* usrp2: remove old unused readback mux valueJosh Blum2011-07-282-2/+2
|
* usrp2: bump minor version number for changesJosh Blum2011-07-282-2/+2
|
* vita_rx_ctrl: use an extra cmd bit to signal stopJosh Blum2011-07-281-7/+7
|
* usrp2: fixed swapped tx/rx signals for nsgpioJosh Blum2011-07-282-2/+2
|
* simple_gemac: add parameter to allow disabling rx flow control at compile timeMatt Ettus2011-07-271-6/+10
|
* u2/u2p: apply atr/gpio changes to u2pMatt Ettus2011-07-272-14/+7
|
* atr: forgot to delete this lineMatt Ettus2011-07-271-1/+0
|
* u2: redo the atr gpio pins, remove some old cruftMatt Ettus2011-07-272-52/+48
|
* u2p: finish copying over serdes light fixMatt Ettus2011-07-221-2/+1
|
* u2/u2p: further qualify the serdes link lightMatt Ettus2011-07-213-7/+13
|
* usrp2: split inspection logic into each relevant cycleJosh Blum2011-07-191-11/+35
|
* appease the ISE godsMatt Ettus2011-07-195-2/+5
|
* removed wb readback of ATR, allowing it to be synthesized as lutsMatt Ettus2011-07-192-4/+10
|
* N200: detailed map report allows you to see what takes up too much spaceMatt Ettus2011-07-194-0/+4
|
* dsp: reduce bitwidth to help timingMatt Ettus2011-07-191-4/+6
|
* fpga: print timing report after generate bin fileJosh Blum2011-07-192-1/+34
|
* dsp: reset the interpolator when the rate changes, to prevent oscillationMatt Ettus2011-07-191-7/+8
|
* b100: fix for fpga syntax error on xfer_rateJosh Blum2011-07-191-1/+1
|
* Merge branch 'b100_shrink' into new_workJosh Blum2011-07-1929-718/+967
|\
| * usrp2: split compat number into major/minor (increment minor for fixes)Josh Blum2011-07-032-2/+2
| |
| * e100: proc_int should be high when interruptedJosh Blum2011-06-201-3/+1
| |